C++ Base64Encode函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中Base64Encode函数的典型用法代码示例。如果您正苦于以下问题：C++ Base64Encode函数的具体用法？C++ Base64Encode怎么用？C++ Base64Encode使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Base64Encode函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: decode_send

void decode_send(char serial_input[181]){
	char temp1[181] = {0};
        char sender[181] = {0};
        int rc = 0;
        printf("[DECODING: %s\n",serial_input);
        switch(serial_input[1])
        {
                case '3': //disable warning sercurity
			serial_input[1] = '2';
			sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
                        break;
		case '4': //get status autolight 1 2
			serial_input[1] = '3';
			sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
			break;
		case '6': //turn led 1 off
			serial_input[1] = '5';
			sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
			break;
		case '7': //turn led 2 on
			serial_input[1] = '6';
			sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
			break;
		case '8': //turn led 2 off
                        serial_input[1] = '6';
                        sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
                        break;
		case '9': //turn led 3 on
                        serial_input[1] = '7';
                        sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
                        break;
		case 'a': //turn led 3 off
                        serial_input[1] = '7';
                        sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
                        break;
		case 'b': //turn led 4 on
                        serial_input[1] = '8';
                        sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
                        break;
		case 'c': //turn led 4 off
                        serial_input[1] = '8';
                        sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
                        break;
		case 'e': //turn Autoled 1 off
                        serial_input[1] = 'd';
                        sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
                        break;
		case 'k': // detected opened door
			sprintf(temp1,"006$rpi001$ceslab$Door");
			break;
		default:
			sprintf(temp1, "005$%s$%s$%s", "rpi001", "ceslab", serial_input);
			break;
        }
        printf("[Detected] SEND data %s \n", temp1);
        rc = Base64Encode(temp1, sender, BUFFFERLEN);
        send(global_socket,sender,181,NULL);
}

开发者ID:ndksys01，项目名称:Firmware-Rpi-，代码行数:58，代码来源:servo.c

示例2: promise

already_AddRefed<Promise>
MediaKeySession::GenerateRequest(const nsAString& aInitDataType,
                                 const ArrayBufferViewOrArrayBuffer& aInitData,
                                 ErrorResult& aRv)
{
  nsRefPtr<DetailedPromise> promise(MakePromise(aRv));
  if (aRv.Failed()) {
    return nullptr;
  }

  if (!mUninitialized) {
    EME_LOG("MediaKeySession[%p,'%s'] GenerateRequest() failed, uninitialized",
            this, NS_ConvertUTF16toUTF8(mSessionId).get());
    promise->MaybeReject(NS_ERROR_DOM_INVALID_ACCESS_ERR,
                         NS_LITERAL_CSTRING("Session is already initialized in MediaKeySession.generateRequest()"));
    return promise.forget();
  }

  mUninitialized = false;

  nsTArray<uint8_t> data;
  if (aInitDataType.IsEmpty() ||
      !CopyArrayBufferViewOrArrayBufferData(aInitData, data)) {
    promise->MaybeReject(NS_ERROR_DOM_INVALID_ACCESS_ERR,
                         NS_LITERAL_CSTRING("Bad arguments to MediaKeySession.generateRequest()"));
    EME_LOG("MediaKeySession[%p,'%s'] GenerateRequest() failed, "
            "invalid initData or initDataType",
      this, NS_ConvertUTF16toUTF8(mSessionId).get());
    return promise.forget();
  }

  // Convert initData to base64 for easier logging.
  // Note: UpdateSession() Move()s the data out of the array, so we have
  // to copy it here.
  nsAutoCString base64InitData;
  if (EME_LOG_ENABLED()) {
    nsDependentCSubstring rawInitData(reinterpret_cast<const char*>(data.Elements()),
      data.Length());
    if (NS_FAILED(Base64Encode(rawInitData, base64InitData))) {
      NS_WARNING("Failed to base64 encode initData for logging");
    }
  }

  PromiseId pid = mKeys->StorePromise(promise);
  mKeys->GetCDMProxy()->CreateSession(Token(),
                                      mSessionType,
                                      pid,
                                      aInitDataType, data);

  EME_LOG("MediaKeySession[%p,'%s'] GenerateRequest() sent, "
          "promiseId=%d initData(base64)='%s'",
          this,
          NS_ConvertUTF16toUTF8(mSessionId).get(),
          pid,
          base64InitData.get());

  return promise.forget();
}

开发者ID:hobinjk，项目名称:gecko-dev，代码行数:58，代码来源:MediaKeySession.cpp

示例3: TPMinitialProvisioning

int TPMinitialProvisioning(void)
{
    if (EKserverAddr == NULL)
    {
        printf("TPM Manufacturer Endorsement Credential Server Address cannot be NULL\n");
        return -99;
    }
    RetrieveEndorsementCredentials(Base64Encode(HashEKPublicKey()));
    return 0;
}

开发者ID:AdditionalPylons，项目名称:tpm2.0-tools，代码行数:10，代码来源:tpm2_getmanufec.cpp

示例4: NS_ENSURE_ARG_POINTER

nsresult
SRICheckDataVerifier::VerifyHash(const SRIMetadata& aMetadata,
                                 uint32_t aHashIndex,
                                 const nsACString& aSourceFileURI,
                                 nsIConsoleReportCollector* aReporter)
{
  NS_ENSURE_ARG_POINTER(aReporter);

  nsAutoCString base64Hash;
  aMetadata.GetHash(aHashIndex, &base64Hash);
  SRILOG(("SRICheckDataVerifier::VerifyHash, hash[%u]=%s", aHashIndex, base64Hash.get()));

  nsAutoCString binaryHash;
  if (NS_WARN_IF(NS_FAILED(Base64Decode(base64Hash, binaryHash)))) {
    nsTArray<nsString> params;
    aReporter->AddConsoleReport(nsIScriptError::errorFlag,
                                NS_LITERAL_CSTRING("Sub-resource Integrity"),
                                nsContentUtils::eSECURITY_PROPERTIES,
                                aSourceFileURI, 0, 0,
                                NS_LITERAL_CSTRING("InvalidIntegrityBase64"),
                                const_cast<const nsTArray<nsString>&>(params));
    return NS_ERROR_SRI_CORRUPT;
  }

  uint32_t hashLength;
  int8_t hashType;
  aMetadata.GetHashType(&hashType, &hashLength);
  if (binaryHash.Length() != hashLength) {
    nsTArray<nsString> params;
    aReporter->AddConsoleReport(nsIScriptError::errorFlag,
                                NS_LITERAL_CSTRING("Sub-resource Integrity"),
                                nsContentUtils::eSECURITY_PROPERTIES,
                                aSourceFileURI, 0, 0,
                                NS_LITERAL_CSTRING("InvalidIntegrityLength"),
                                const_cast<const nsTArray<nsString>&>(params));
    return NS_ERROR_SRI_CORRUPT;
  }

  if (MOZ_LOG_TEST(SRILogHelper::GetSriLog(), mozilla::LogLevel::Debug)) {
    nsAutoCString encodedHash;
    nsresult rv = Base64Encode(mComputedHash, encodedHash);
    if (NS_SUCCEEDED(rv)) {
      SRILOG(("SRICheckDataVerifier::VerifyHash, mComputedHash=%s",
              encodedHash.get()));
    }
  }

  if (!binaryHash.Equals(mComputedHash)) {
    SRILOG(("SRICheckDataVerifier::VerifyHash, hash[%u] did not match", aHashIndex));
    return NS_ERROR_SRI_CORRUPT;
  }

  SRILOG(("SRICheckDataVerifier::VerifyHash, hash[%u] verified successfully", aHashIndex));
  return NS_OK;
}

开发者ID:marcoscaceres，项目名称:gecko-dev，代码行数:55，代码来源:SRICheck.cpp

示例5: Escape

// https://developer.twitter.com
// /en/docs/basics/authentication/guides/creating-a-signature.html
std::string Network::CalcSignature(
	const std::string &http_method, const std::string &base_url,
	const KeyValue &oauth_param, const KeyValue &query_param,
	const std::string &consumer_secret, const std::string &token_secret)
{
	// "Collecting parameters"
	// percent encode しつつ合成してキーでソートする
	KeyValue param;
	auto encode_insert = [this, &param](const KeyValue &map) {
		for (const auto &entry : map) {
			param.emplace(Escape(entry.first), Escape(entry.second));
		}
	};
	encode_insert(oauth_param);
	encode_insert(query_param);
	// 文字列にする
	// key1=value1&key2=value2&...
	std::string param_str;
	bool is_first = true;
	for (const auto &entry : param) {
		if (is_first) {
			is_first = false;
		}
		else {
			param_str += '&';
		}
		param_str += entry.first;
		param_str += '=';
		param_str += entry.second;
	}

	// "Creating the signature base string"
	// 署名対象
	std::string base = http_method;
	base += '&';
	base += Escape(base_url);
	base += '&';
	base += Escape(param_str);

	// "Getting a signing key"
	// 署名鍵は consumer_secret と token_secret をエスケープして & でつなぐだけ
	std::string key = Escape(consumer_secret);
	key += '&';
	key += Escape(token_secret);

	// "Calculating the signature"
	ShaDigest signature;
	HmacSha1(
		key.data(), key.size(),
		reinterpret_cast<const unsigned char *>(base.data()), base.size(),
		signature);

	return Base64Encode(signature, sizeof(signature));
}

开发者ID:yappy，项目名称:DollsKit，代码行数:56，代码来源:net.cpp

示例6: ToBase64

nsCString
ToBase64(const nsTArray<uint8_t>& aBytes)
{
  nsAutoCString base64;
  nsDependentCSubstring raw(reinterpret_cast<const char*>(aBytes.Elements()),
                            aBytes.Length());
  nsresult rv = Base64Encode(raw, base64);
  if (NS_WARN_IF(NS_FAILED(rv))) {
    return NS_LITERAL_CSTRING("[Base64EncodeFailed]");
  }
  return base64;
}

开发者ID:Danielzac，项目名称:gecko-dev，代码行数:12，代码来源:GMPUtils.cpp

示例7: trim_right

BOOL CSoftInfoQueryTask::CombineBodyContent(const SoftQueryInfoList &queryInfoList, string &bodyContent)
{
	try
	{
		// SID
		string sids;
		{
			ostringstream os;
			os.imbue(locale::classic());

			SoftQueryInfoCIter end = queryInfoList.end();
			for(SoftQueryInfoCIter it = queryInfoList.begin(); it != end; ++it)
			{
				os<<it->_id<<',';
			}

			sids = os.str();
			trim_right(sids, ",");
		}

		// 验证码
		string code = "&c=";
		{
			unsigned int crc32 = ::CRC32(0, sids.c_str(), static_cast<unsigned int>(sids.length()));

			static const char KEY[] = "kingsoftgrade2_%^}[793dkle";
			crc32 = ::CRC32(crc32, KEY, static_cast<unsigned int>(sizeof(KEY) - 1));

			ostringstream os;
			os.imbue(locale::classic());

			os<<hex<<crc32;
			code += os.str();
		}

		// 版本 & SID & 验证码
		string plainText = string("v=1_0&sid=") + sids + code;

		// base64
		DWORD sizeBase64 = Base64EncodeGetLength(static_cast<DWORD>(plainText.length()));

		auto_buffer<char> buffer(sizeBase64 + 1);
		if(buffer.empty()) return FALSE;

		sizeBase64 = Base64Encode(&buffer[0], plainText.c_str(), static_cast<DWORD>(plainText.length()));
		buffer[sizeBase64] = '\0';

		bodyContent = string("c=") + &buffer[0] + "\r\n";
		return TRUE;
	}
	catch(...) {}
	return FALSE;
}

开发者ID:6520874，项目名称:pcmanager，代码行数:53，代码来源:SoftInfoQuery.cpp

示例8: _video_send_ClientThread

static int _video_send_ClientThread()
{
	char *header, *init , *dest, *data;
	char buffer[181] = {0};
	char temp[181]={0};
	char temp1[181]={0};
	char combine[181]={0};

	char receiver[181] = {0};
	char sender[181] = {0};
	int rc = 0;

	// Send ice ifo to android
	memcpy(temp,mInfo_SendVideo,sizeof(temp));
	sprintf(combine,"002$%s$%s$%s",destBuf,originBuf,temp);
	rc = Base64Encode(combine, sender, BUFFFERLEN);
	send(global_socket,sender,181,NULL);

	printf ("=============== Send Video ===============\n");
	printf("[send video] send = %s\n", combine);
	printf("[send video] send[Encode] = %s\n", sender);

	//Receive ice info from android
	if(recv(global_socket, buffer, 181, NULL))
	{
		rc = Base64Decode(buffer, receiver, BUFFFERLEN);

		printf("[send video] receive = %s\n", buffer);
		printf("[send video] receive[Decode] = %s\n", receiver);

		header = strtok (receiver,"$");
		init = strtok (NULL,"$");
		dest = strtok (NULL,"$");
		data = strtok (NULL,"$");
		//printf("%s - %s\n",header ,data);

		int j=0;
		if (data!=NULL)
			while(j<strlen(data))
			{
				temp1[j] = *(data+j);
				j++;
			}

		if(!strcmp(header,"002"))
		{
			AndroidInfo_SendVideo = (gchar*)malloc(sizeof(gchar)*181);
			memcpy(AndroidInfo_SendVideo, temp1, sizeof(temp1));
			flag_trans = 1;
			return 0;
		}
	}
}

开发者ID:cxp1991，项目名称:WORKING，代码行数:53，代码来源:send_video.c

示例9: copyKeys

static void copyKeys(QSettings &old, SettingsObject *object)
{
    foreach (const QString &key, old.childKeys()) {
        QVariant value = old.value(key);
        if ((QMetaType::Type)value.type() == QMetaType::QDateTime)
            object->write(key, value.toDateTime());
        else if ((QMetaType::Type)value.type() == QMetaType::QByteArray)
            object->write(key, Base64Encode(value.toByteArray()));
        else
            object->write(key, value.toString());
    }
}

开发者ID:bookie988，项目名称:ricochet，代码行数:12，代码来源:main.cpp

示例10: auth

void
HTTPRequestHeader::SetAuthentication(int type, std::string userName, std::string password)
{
	if (type != HTTP_AUTH_TYPE_BASIC)
		return;

	std::string auth("Basic ");
	std::string authString;
	authString.append(userName).append(":").append(password);
	authString = Base64Encode(authString);
	auth.append(authString);
	SetValue("Authorization", auth);
}

开发者ID:jackburton79，项目名称:agent，代码行数:13，代码来源:HTTPRequestHeader.cpp

示例11: desencode

static void desencode(char *content, char *content_in)
{
	char de_content[1024] = {0};
	DES_cblock key_cblock;
	DES_string_to_key(key, &key_cblock);
	DES_key_schedule schedule;
	DES_set_key_checked(&key_cblock, &schedule);
	DES_ncbc_encrypt(content, de_content, strlen(content), &schedule, &key_cblock, DES_ENCRYPT  );
	DES_string_to_key(key, &key_cblock);
	DES_set_key_checked(&key_cblock, &schedule);
	printf("key_cblock= %s\n", key_cblock);
	Base64Encode(de_content, strlen(de_content), content_in, sizeof(content_in));
}

开发者ID:helight，项目名称:helight_code，代码行数:13，代码来源:tt.c

示例12: promise

already_AddRefed<Promise>
MediaKeySession::Update(const ArrayBufferViewOrArrayBuffer& aResponse, ErrorResult& aRv)
{
  nsRefPtr<DetailedPromise> promise(MakePromise(aRv,
    NS_LITERAL_CSTRING("MediaKeySession.update")));
  if (aRv.Failed()) {
    return nullptr;
  }
  nsTArray<uint8_t> data;
  if (IsClosed() || !mKeys->GetCDMProxy()) {
    promise->MaybeReject(NS_ERROR_DOM_INVALID_STATE_ERR,
                         NS_LITERAL_CSTRING("Session is closed or was not properly initialized"));
    EME_LOG("MediaKeySession[%p,'%s'] Update() failed, session is closed or was not properly initialised.",
            this, NS_ConvertUTF16toUTF8(mSessionId).get());
    return promise.forget();
  }
  if (!CopyArrayBufferViewOrArrayBufferData(aResponse, data)) {
    promise->MaybeReject(NS_ERROR_DOM_INVALID_ACCESS_ERR,
                         NS_LITERAL_CSTRING("Invalid response buffer"));
    EME_LOG("MediaKeySession[%p,'%s'] Update() failed, invalid response buffer",
            this, NS_ConvertUTF16toUTF8(mSessionId).get());
    return promise.forget();
  }


  // Convert response to base64 for easier logging.
  // Note: UpdateSession() Move()s the data out of the array, so we have
  // to copy it here.
  nsAutoCString base64Response;
  if (EME_LOG_ENABLED()) {
    nsDependentCSubstring rawResponse(reinterpret_cast<const char*>(data.Elements()),
      data.Length());
    if (NS_FAILED(Base64Encode(rawResponse, base64Response))) {
      NS_WARNING("Failed to base64 encode response for logging");
    }
  }

  PromiseId pid = mKeys->StorePromise(promise);
  mKeys->GetCDMProxy()->UpdateSession(mSessionId,
                                      pid,
                                      data);

  EME_LOG("MediaKeySession[%p,'%s'] Update() sent to CDM, "
          "promiseId=%d Response(base64)='%s'",
           this,
           NS_ConvertUTF16toUTF8(mSessionId).get(),
           pid,
           base64Response.get());

  return promise.forget();
}

开发者ID:rhelmer，项目名称:gecko-dev，代码行数:51，代码来源:MediaKeySession.cpp

示例13: ShowErroTips

UINT DlgModPass::ModPwdThread(LPVOID pParam)
{
	DlgModPass* pDlg = static_cast<DlgModPass*>(pParam);
	CXTraderApp* pApp = g_App;
	CAppCfgs& s = g_App->m_cfg;

	char szOriPass[MAX_PATH],szNewPass[MAX_PATH];
	
	if (pDlg->m_szNewPass.IsEmpty()||pDlg->m_szOldPass.IsEmpty()||pDlg->m_szNewCfm.IsEmpty())
	{
		ShowErroTips(IDS_STREMPTY,IDS_STRTIPS);
		return 0;
	}
	
	if (pDlg->m_szNewPass.Compare(pDlg->m_szNewCfm)!=0)
	{
		ShowErroTips(IDS_CFMPASSERR,IDS_STRTIPS);
		return 0;
	}
	
	uni2ansi(CP_ACP,(LPTSTR)(LPCTSTR)pDlg->m_szOldPass,szOriPass);
	uni2ansi(CP_ACP,(LPTSTR)(LPCTSTR)pDlg->m_szNewPass,szNewPass);
	if (pDlg->m_itype==0)
	{	
		pApp->m_cT->ReqUserPwdUpdate(szNewPass,szOriPass);
		
		DWORD dwRet = WaitForSingleObject(g_hEvent,WAIT_MS);
		if (dwRet==WAIT_OBJECT_0)
		{
			strcpy(s.m_sPwd,szNewPass);
			ResetEvent(g_hEvent);
			///////±£´æÐÞ¸ÄµÄÃÜÂë////////
            size_t iSize = s.m_pInfVec.size();
				
			TThostFtdcEncPasswordType szEncPass;
			Base64Encode(szEncPass, s.m_sPwd, 0);
			if (iSize>0){ strcpy(s.m_pInfVec[iSize-1].szPass,szEncPass); }
		}	
	}
	if (pDlg->m_itype==1)
	{
		pApp->m_cT->ReqTdAccPwdUpdate(szNewPass,szOriPass);
		
		DWORD dwRet = WaitForSingleObject(g_hEvent,WAIT_MS);
		if (dwRet==WAIT_OBJECT_0)
		{ ResetEvent(g_hEvent); }
	}

	pDlg->m_pModPass = NULL;
	return 0;
}

开发者ID:AutoCoder，项目名称:xtrader_lite，代码行数:51，代码来源:DlgModPass.cpp

示例14: Value

const char *MSNObject::Base64Encoded(void) {
	if (fBase64.Length() == 0) {
		BString temp = Value();
		temp << '\0';
	
		char *b64 = Base64Encode(temp.String(), temp.Length());
		fBase64 = b64;
		
		free(b64);
		
	};
	
	return fBase64.String();
};

开发者ID:louisdem，项目名称:IMKit，代码行数:14，代码来源:MSNObject.cpp

示例15: GetEncodedVersion

static int GetEncodedVersion(char *buf)
{
	char version[20] = {0};
	char tmp[9] = {0};
	
	sprintf(tmp, "%02x%02x%02x%02x", magic[0], magic[1], magic[2], magic[3]);
	
	memcpy(version, ClientVersion, strlen(ClientVersion));
	memcpy(version+16, magic, 4);
	
	EORMix(version, tmp, 16);
	EORMix(version, H3CKey, 20);
	
	return Base64Encode(version, buf, 20);
}

开发者ID:brucexin，项目名称:xclient，代码行数:15，代码来源:eap.c

示例16: main

int main()
{
	char* in = "This is a simple base64 encoding test!\n這是個簡單的 Base64 編碼測試!";
	int inlen = strlen(in);
	int outlen = Base64Encode((BYTE*)in, inlen, NULL, 0);
	char* out = new char[outlen + 1];
	memset(out, 'X', outlen);
	outlen = Base64Encode((BYTE*)in, inlen, (BYTE*)out, outlen);
	out[outlen] = 0;
	printf("encoded: %s\n", out);

	in = out;
	inlen = strlen(in);
	outlen = Base64Decode((BYTE*)in, inlen, NULL, 0);
	out = new char[outlen + 1];
	memset(out, 'X', outlen);
	outlen = Base64Decode((BYTE*)in, inlen, (BYTE*)out, outlen);
	out[outlen] = 0;
	printf("decoded: %s\n", out);
	delete in;
	delete out;
	getchar();
	return 0;
}

开发者ID:Kerlifw，项目名称:pcman-windows，代码行数:24，代码来源:base64.cpp

示例17: main

int main() {
  //Encode To Base64
  char* base64EncodeOutput, *text="Hello World";

  Base64Encode(text, strlen(text), &base64EncodeOutput);
  printf("Output (base64): %s\n", base64EncodeOutput);

  //Decode From Base64
  char* base64DecodeOutput;
  size_t test;
  Base64Decode("SGVsbG8gV29ybGQ=", &base64DecodeOutput, &test);
  printf("Output: %s %d\n", base64DecodeOutput, test);
  
  return(0);
}

开发者ID:mroseman95，项目名称:Crypto-Plugin，代码行数:15，代码来源:Main.c

示例18: memset

bool NtlmProxy::NtlmStep1(char* pOutBuffer, int* pOutBufferLen)
{
	memset(pOutBuffer, 0, *pOutBufferLen);
	if(!m_pFunTable)
	{
		return false;
	}

	SECURITY_STATUS SecurityStatus = SEC_E_OK;

	BYTE Buffer[1024];
	memset(Buffer,0,1024);

	SecBuffer sBuffer;
	sBuffer.cbBuffer = 1024;
	sBuffer.BufferType = SECBUFFER_TOKEN;
	sBuffer.pvBuffer = Buffer;

	SecBufferDesc OutBufferDesc;
	OutBufferDesc.ulVersion = SECBUFFER_VERSION;
	OutBufferDesc.cBuffers = 1;
	OutBufferDesc.pBuffers = &sBuffer;

	SecurityStatus = m_pFunTable->InitializeSecurityContextA(
		&m_hCredentials,
		0,
		"NTLM",
		ISC_REQ_USE_DCE_STYLE | ISC_REQ_DELEGATE |
		ISC_REQ_MUTUAL_AUTH |ISC_REQ_REPLAY_DETECT |
		ISC_REQ_SEQUENCE_DETECT |ISC_REQ_CONFIDENTIALITY |
		ISC_REQ_CONNECTION,
		0,
		0,
		0,
		0,
		&m_SecurityContext,
		&OutBufferDesc,
		&m_ulContextAttributes,
		&m_ts
		);

	if (IS_ERROR(SecurityStatus))
		return false;

	Base64Encode((unsigned char*)sBuffer.pvBuffer, sBuffer.cbBuffer, pOutBuffer, pOutBufferLen, BASE64_FLAG_NOCRLF);

	return true;
}

开发者ID:fffonion，项目名称:V8，代码行数:48，代码来源:ntlmproxy.cpp

示例19: CreateJSONCommunityFlowIdv4

static void CreateJSONCommunityFlowIdv4(json_t *js, const Flow *f,
        const uint16_t seed)
{
    struct {
        uint16_t seed;
        uint32_t src;
        uint32_t dst;
        uint8_t proto;
        uint8_t pad0;
        uint16_t sp;
        uint16_t dp;
    } __attribute__((__packed__)) ipv4;

    uint32_t src = f->src.addr_data32[0];
    uint32_t dst = f->dst.addr_data32[0];
    uint16_t sp = f->sp;
    if (f->proto == IPPROTO_ICMP)
        sp = f->icmp_s.type;
    sp = htons(sp);
    uint16_t dp = f->dp;
    if (f->proto == IPPROTO_ICMP)
        dp = f->icmp_d.type;
    dp = htons(dp);

    ipv4.seed = htons(seed);
    if (ntohl(src) < ntohl(dst) || (src == dst && sp < dp)) {
        ipv4.src = src;
        ipv4.dst = dst;
        ipv4.sp = sp;
        ipv4.dp = dp;
    } else {
        ipv4.src = dst;
        ipv4.dst = src;
        ipv4.sp = dp;
        ipv4.dp = sp;
    }
    ipv4.proto = f->proto;
    ipv4.pad0 = 0;

    uint8_t hash[20];
    if (ComputeSHA1((const uint8_t *)&ipv4, sizeof(ipv4), hash, sizeof(hash)) == 1) {
        unsigned char base64buf[64] = "1:";
        unsigned long out_len = sizeof(base64buf) - 2;
        if (Base64Encode(hash, sizeof(hash), base64buf+2, &out_len) == SC_BASE64_OK) {
            json_object_set_new(js, "community_id", json_string((const char *)base64buf));
        }
    }
}

开发者ID:gozzy，项目名称:suricata，代码行数:48，代码来源:output-json.c

示例20: CreateJSONCommunityFlowIdv6

static void CreateJSONCommunityFlowIdv6(json_t *js, const Flow *f,
        const uint16_t seed)
{
    struct {
        uint16_t seed;
        uint32_t src[4];
        uint32_t dst[4];
        uint8_t proto;
        uint8_t pad0;
        uint16_t sp;
        uint16_t dp;
    } __attribute__((__packed__)) ipv6;

    uint16_t sp = f->sp;
    if (f->proto == IPPROTO_ICMPV6)
        sp = f->icmp_s.type;
    sp = htons(sp);
    uint16_t dp = f->dp;
    if (f->proto == IPPROTO_ICMPV6)
        dp = f->icmp_d.type;
    dp = htons(dp);

    ipv6.seed = htons(seed);
    if (FlowHashRawAddressIPv6LtU32(f->src.addr_data32, f->dst.addr_data32) ||
            ((memcmp(&f->src, &f->dst, sizeof(f->src)) == 0) && sp < dp))
    {
        memcpy(&ipv6.src, &f->src.addr_data32, 16);
        memcpy(&ipv6.dst, &f->dst.addr_data32, 16);
        ipv6.sp = sp;
        ipv6.dp = dp;
    } else {
        memcpy(&ipv6.src, &f->dst.addr_data32, 16);
        memcpy(&ipv6.dst, &f->src.addr_data32, 16);
        ipv6.sp = dp;
        ipv6.dp = sp;
    }
    ipv6.proto = f->proto;
    ipv6.pad0 = 0;

    uint8_t hash[20];
    if (ComputeSHA1((const uint8_t *)&ipv6, sizeof(ipv6), hash, sizeof(hash)) == 1) {
        unsigned char base64buf[64] = "1:";
        unsigned long out_len = sizeof(base64buf) - 2;
        if (Base64Encode(hash, sizeof(hash), base64buf+2, &out_len) == SC_BASE64_OK) {
            json_object_set_new(js, "community_id", json_string((const char *)base64buf));
        }
    }
}

开发者ID:gozzy，项目名称:suricata，代码行数:48，代码来源:output-json.c

注：本文中的Base64Encode函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BaseClone函数代码示例发布时间：2022-05-30

C++ Base函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18935|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9908|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8299|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8658|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8594|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9600|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8584|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7972|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8593|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7513|2022-11-06

客服电话

电子邮件

C++ Base64Encode函数代码示例

示例1: decode_send

示例2: promise

示例3: TPMinitialProvisioning

示例4: NS_ENSURE_ARG_POINTER

示例5: Escape

示例6: ToBase64

示例7: trim_right

示例8: _video_send_ClientThread

示例9: copyKeys

示例10: auth

示例11: desencode

示例12: promise

示例13: ShowErroTips

示例14: Value

示例15: GetEncodedVersion

示例16: main

示例17: main

示例18: memset

示例19: CreateJSONCommunityFlowIdv4

示例20: CreateJSONCommunityFlowIdv6

请发表评论

全部评论

上一篇：

下一篇：

AllenDowney/ThinkDataStructures: LaTeX s

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053