C++ BX_DEBUG函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BX_DEBUG函数的典型用法代码示例。如果您正苦于以下问题：C++ BX_DEBUG函数的具体用法？C++ BX_DEBUG怎么用？C++ BX_DEBUG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BX_DEBUG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: defined

void bx_tap_pktmover_c::rx_timer()
{
  int nbytes;
  Bit8u buf[BX_PACKET_BUFSIZE];
  Bit8u *rxbuf;
  if (fd<0) return;
#if defined(__sun__)
  struct strbuf sbuf;
  int f = 0;
  sbuf.maxlen = sizeof(buf);
  sbuf.buf = (char *)buf;
  nbytes = getmsg(fd, NULL, &sbuf, &f) >=0 ? sbuf.len : -1;
#else
  nbytes = read (fd, buf, sizeof(buf));
#endif

  // hack: discard first two bytes
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__APPLE__) || defined(__sun__) // Should be fixed for other *BSD
  rxbuf = buf;
#else
  rxbuf = buf+2;
  nbytes-=2;
#endif

#if defined(__linux__)
  // hack: TAP device likes to create an ethernet header which has
  // the same source and destination address FE:FD:00:00:00:00.
  // Change the dest address to FE:FD:00:00:00:01.
  if (!memcmp(&rxbuf[0], &rxbuf[6], 6)) {
    rxbuf[5] = guest_macaddr[5];
  }
#endif

  if (nbytes>0)
    BX_DEBUG(("tap read returned %d bytes", nbytes));
  if (nbytes<0) {
    if (errno != EAGAIN)
      BX_ERROR(("tap read error: %s", strerror(errno)));
    return;
  }
#if BX_ETH_TAP_LOGGING
  if (nbytes > 0) {
    BX_DEBUG(("receive packet length %u", nbytes));
    // dump raw bytes to a file, eventually dump in pcap format so that
    // tcpdump -r FILE can interpret them for us.
    int n = fwrite(rxbuf, nbytes, 1, rxlog);
    if (n != 1) BX_ERROR(("fwrite to rxlog failed, nbytes = %d", nbytes));
    // dump packet in hex into an ascii log file
    write_pktlog_txt(rxlog_txt, rxbuf, nbytes, 1);
    // flush log so that we see the packets as they arrive w/o buffering
    fflush(rxlog);
  }
#endif
  BX_DEBUG(("eth_tap: got packet: %d bytes, dst=%x:%x:%x:%x:%x:%x, src=%x:%x:%x:%x:%x:%x\n", nbytes, rxbuf[0], rxbuf[1], rxbuf[2], rxbuf[3], rxbuf[4], rxbuf[5], rxbuf[6], rxbuf[7], rxbuf[8], rxbuf[9], rxbuf[10], rxbuf[11]));
  if (nbytes < 60) {
    BX_INFO(("packet too short (%d), padding to 60", nbytes));
    nbytes = 60;
  }
  (*rxh)(netdev, rxbuf, nbytes);
}

开发者ID:iver6，项目名称:BA，代码行数:60，代码来源:eth_tap.cpp

示例2: BX_DEBUG

BX_CPU_C::load_cs(bx_selector_t *selector, bx_descriptor_t *descriptor, Bit8u cpl)
{
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector = *selector;
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache    = *descriptor;

  /* caller may request different CPL then in selector */
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.rpl = cpl;
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].cache.valid  = 1;
  // Added cpl to the selector value.
  BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value =
    (0xfffc & BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value) | cpl;

#if BX_SUPPORT_X86_64
  if (BX_CPU_THIS_PTR efer.lma) {
    if (descriptor->u.segment.l) {
      BX_CPU_THIS_PTR cpu_mode = BX_MODE_LONG_64;
      BX_DEBUG(("Long Mode Activated"));
      loadSRegLMNominal(BX_SEG_REG_CS, selector->value, cpl);
    }
    else {
      BX_DEBUG(("Compatibility Mode Activated"));
      BX_CPU_THIS_PTR cpu_mode = BX_MODE_LONG_COMPAT;
    }
  }
#endif

#if BX_SUPPORT_ICACHE
  BX_CPU_THIS_PTR updateFetchModeMask();
#endif

  // Loading CS will invalidate the EIP fetch window.
  invalidate_prefetch_q();
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:33，代码来源:ctrl_xfer_pro.cpp

示例3: setup_port

int serial_raw::receive()
{
#ifdef WIN32
  int data;
#endif

  if (present) {
#ifdef WIN32
    if (DCBchanged) {
      setup_port();
    }
    data = rxdata_buffer[0];
    if (rxdata_count > 0) {
      memcpy(&rxdata_buffer[0], &rxdata_buffer[1], sizeof(Bit16s)*(RX_BUFSIZE-1));
      rxdata_count--;
    }
    if (data < 0) {
      switch (data) {
        case RAW_EVENT_CTS_ON:
          MSR_value |= 0x10;
          break;
        case RAW_EVENT_CTS_OFF:
          MSR_value &= ~0x10;
          break;
        case RAW_EVENT_DSR_ON:
          MSR_value |= 0x20;
          break;
        case RAW_EVENT_DSR_OFF:
          MSR_value &= ~0x20;
          break;
        case RAW_EVENT_RING_ON:
          MSR_value |= 0x40;
          break;
        case RAW_EVENT_RING_OFF:
          MSR_value &= ~0x40;
          break;
        case RAW_EVENT_RLSD_ON:
          MSR_value |= 0x80;
          break;
        case RAW_EVENT_RLSD_OFF:
          MSR_value &= ~0x80;
          break;
      }
    }
    return data;
#else
    BX_DEBUG (("receive returning 'A'"));
    return (int)'A';
#endif
  } else {
    BX_DEBUG (("receive returning 'A'"));
    return (int)'A';
  }
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:54，代码来源:serial_raw.cpp

示例4: BX_DEBUG

BXKeyEntry *bx_keymap_c::findHostKey(Bit32u key)
{
  // We look through the keymap table to find the searched key
  for (Bit16u i=0; i<keymapCount; i++) {
    if (keymapTable[i].hostKey == key) {
      BX_DEBUG (("key 0x%02x matches hostKey for entry #%d", key, i));
      return &keymapTable[i];
    }
  }
  BX_DEBUG(("key %02x matches no entries", key));

  // Return default
  return NULL;
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:14，代码来源:keymap.cpp

示例5: BX_DEBUG

void bx_pit_c::handle_timer()
{
  Bit64u my_time_usec = bx_virt_timer.time_usec();
  Bit64u time_passed = my_time_usec-BX_PIT_THIS s.last_usec;
  Bit32u time_passed32 = (Bit32u)time_passed;

  BX_DEBUG(("entering timer handler"));

  if(time_passed32) {
    periodic(time_passed32);
  }
  BX_PIT_THIS s.last_usec = BX_PIT_THIS s.last_usec + time_passed;
  if (time_passed || (BX_PIT_THIS s.last_next_event_time != BX_PIT_THIS s.timer.get_next_event_time())) {
    BX_DEBUG(("RESETting timer"));
    bx_virt_timer.deactivate_timer(BX_PIT_THIS s.timer_handle[0]);
    BX_DEBUG(("deactivated timer"));
    if(BX_PIT_THIS s.timer.get_next_event_time()) {
      bx_virt_timer.activate_timer(BX_PIT_THIS s.timer_handle[0],
                                   (Bit32u)BX_MAX(1,TICKS_TO_USEC(BX_PIT_THIS s.timer.get_next_event_time())),
                                   0);
      BX_DEBUG(("activated timer"));
    }
    BX_PIT_THIS s.last_next_event_time = BX_PIT_THIS s.timer.get_next_event_time();
  }
  BX_DEBUG(("s.last_usec="FMT_LL"d", BX_PIT_THIS s.last_usec));
  BX_DEBUG(("s.timer_id=%d", BX_PIT_THIS s.timer_handle[0]));
  BX_DEBUG(("s.timer.get_next_event_time=%x", BX_PIT_THIS s.timer.get_next_event_time()));
  BX_DEBUG(("s.last_next_event_time=%d", BX_PIT_THIS s.last_next_event_time));
}

开发者ID:iver6，项目名称:BA，代码行数:29，代码来源:pit_wrap.cpp

示例6: BX_DEBUG

off_t vmware3_image_t::perform_seek()
{
    if(requested_offset < current->min_offset || requested_offset >= current->max_offset)
    {
        if(!sync())
        {
            BX_DEBUG(("could not sync before switching vmware3 COW files"));
            return INVALID_OFFSET;
        }

        while(requested_offset < current->min_offset)
            current = &images[current->header.chain_id - 1];

        while(requested_offset >= current->max_offset)
            current = &images[current->header.chain_id + 1];
    }

    if(current->offset != INVALID_OFFSET && requested_offset >= current->offset
            && requested_offset < current->offset + tlb_size)
        return (requested_offset - current->offset);

    if(!sync())
    {
        BX_DEBUG(("could not sync before seeking vmware3 COW file"));
        return INVALID_OFFSET;
    }

    unsigned relative_offset = (unsigned)(requested_offset - current->min_offset);
    unsigned i = relative_offset >> FL_SHIFT;
    unsigned j = (relative_offset & ~FL_MASK) / tlb_size;

    if(current->slb[i][j])
    {
        if(::lseek(current->fd, current->slb[i][j] * 512, SEEK_SET) < 0)
        {
            BX_DEBUG(("could not seek vmware3 COW to sector slb[%d][%d]", i, j));
            return INVALID_OFFSET;
        }
        if(::read(current->fd, current->tlb, tlb_size) < 0)
        {
            BX_DEBUG(("could not read %d bytes from vmware3 COW image", tlb_size));
            return INVALID_OFFSET;
        }
    }
    else memset(current->tlb, 0, tlb_size);

    current->offset = (requested_offset / tlb_size) * tlb_size;
    return (requested_offset - current->offset);
}

开发者ID:iver6，项目名称:BA，代码行数:49，代码来源:vmware3.cpp

示例7: BX_DEBUG

void serial_raw::set_parity_mode(int mode)
{
  BX_DEBUG (("set parity mode %d", mode));
#ifdef WIN32
  switch (mode) {
    case 0:
      dcb.fParity = FALSE;
      dcb.Parity = NOPARITY;
      break;
    case 1:
      dcb.fParity = TRUE;
      dcb.Parity = ODDPARITY;
      break;
    case 2:
      dcb.fParity = TRUE;
      dcb.Parity = EVENPARITY;
      break;
    case 3:
      dcb.fParity = TRUE;
      dcb.Parity = MARKPARITY;
      break;
    case 4:
      dcb.fParity = TRUE;
      dcb.Parity = SPACEPARITY;
      break;
  }
  DCBchanged = TRUE;
#endif
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:29，代码来源:serial_raw.cpp

示例8: BX_DEBUG

void BX_CPU_C::iret32_stack_return_from_v86(bxInstruction_c *i)
{
  if (BX_CPU_THIS_PTR get_IOPL() < 3) {
    // trap to virtual 8086 monitor
    BX_DEBUG(("IRET in vm86 with IOPL != 3, VME = 0"));
    exception(BX_GP_EXCEPTION, 0);
  }

  Bit32u eip, cs_raw, flags32;
  // Build a mask of the following bits:
  // ID,VIP,VIF,AC,VM,RF,x,NT,IOPL,OF,DF,IF,TF,SF,ZF,x,AF,x,PF,x,CF
  Bit32u change_mask = EFlagsOSZAPCMask | EFlagsTFMask | EFlagsIFMask
                         | EFlagsDFMask | EFlagsNTMask | EFlagsRFMask;

#if BX_CPU_LEVEL >= 4
  change_mask |= (EFlagsIDMask | EFlagsACMask);  // ID/AC
#endif

  eip     = pop_32();
  cs_raw  = pop_32();
  flags32 = pop_32();

  load_seg_reg(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS], (Bit16u) cs_raw);
  EIP = eip;
  // VIF, VIP, VM, IOPL unchanged
  writeEFlags(flags32, change_mask);
}

开发者ID:iver6，项目名称:BA，代码行数:27，代码来源:vm8086.cpp

示例9: while

ssize_t vmware3_image_t::write(const void * buf, size_t count)
{
    ssize_t total = 0;
    while(count > 0)
    {
        off_t offset = perform_seek();
        if(offset == INVALID_OFFSET)
            return -1;
        unsigned bytes_remaining = (unsigned)(tlb_size - offset);
        unsigned amount = 0;
        current->synced = false;
        if(bytes_remaining > count)
        {
            memcpy(current->tlb + offset, buf, count);
            amount = count;
        }
        else
        {
            memcpy(current->tlb + offset, buf, bytes_remaining);
            if(!sync())
            {
                BX_DEBUG(("failed to sync when writing %u bytes", (unsigned)count));
                return -1;
            }
            amount = bytes_remaining;
        }
        requested_offset += amount;
        total += amount;
        count -= amount;
    }
    return total;
}

开发者ID:iver6，项目名称:BA，代码行数:32，代码来源:vmware3.cpp

示例10: UNUSED

void BochsView::MouseUp(BPoint point)
{
  UNUSED(point);
  // currently a place holder function
  BX_DEBUG(("mouseup()"));
  BView::MouseUp(point);
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:7，代码来源:beos.cpp

示例11: invalidate_prefetch_q

  void
bx_cpu_c::RETnear32_Iw(BxInstruction_t *i)
{
  Bit16u imm16;
  Bit32u temp_ESP;
  Bit32u return_EIP;

#if BX_DEBUGGER
  bx_cpu. show_flag |= Flag_ret;
#endif

  if (bx_cpu. sregs[BX_SEG_REG_SS].cache.u.segment.d_b) /* 32bit stack */
    temp_ESP = ESP;
  else
    temp_ESP = SP;

  imm16 = i->Iw;

  invalidate_prefetch_q();


    if (protected_mode()) {
      if ( !can_pop(4) ) {
        BX_PANIC(("retnear_iw: can't pop EIP"));
        /* ??? #SS(0) -or #GP(0) */
        }

      access_linear(bx_cpu. sregs[BX_SEG_REG_SS].cache.u.segment.base + temp_ESP + 0,
        4, CPL==3, BX_READ, &return_EIP);

      if (protected_mode() &&
          (return_EIP > bx_cpu. sregs[BX_SEG_REG_CS].cache.u.segment.limit_scaled) ) {
        BX_DEBUG(("retnear_iw: EIP > limit"));
        exception(BX_GP_EXCEPTION, 0, 0);
        }

      /* Pentium book says imm16 is number of words ??? */
      if ( !can_pop(4 + imm16) ) {
        BX_PANIC(("retnear_iw: can't release bytes from stack"));
        /* #GP(0) -or #SS(0) ??? */
        }

      bx_cpu. eip = return_EIP;
      if (bx_cpu. sregs[BX_SEG_REG_SS].cache.u.segment.d_b) /* 32bit stack */
        ESP += 4 + imm16; /* ??? should it be 2*imm16 ? */
      else
        SP  += 4 + imm16;
      }
    else {
      pop_32(&return_EIP);
      bx_cpu. eip = return_EIP;
      if (bx_cpu. sregs[BX_SEG_REG_SS].cache.u.segment.d_b) /* 32bit stack */
        ESP += imm16; /* ??? should it be 2*imm16 ? */
      else
        SP  += imm16;
      }

  BX_INSTR_UCNEAR_BRANCH(BX_INSTR_IS_RET, bx_cpu. eip);
}

开发者ID:uranix，项目名称:LiveDump，代码行数:59，代码来源:ctrl_xfer32.cpp

示例12: strcpy

// Dumps the contents of a buffer to the log file
void usb_device_c::usb_dump_packet(Bit8u *data, unsigned size)
{
  char the_packet[256], str[16];
  strcpy(the_packet, "Packet contents (in hex):");
  unsigned offset = 0;
  for (unsigned p=0; p<size; p++) {
    if (!(p & 0x0F)) {
      BX_DEBUG(("%s", the_packet));
      sprintf(the_packet, "  0x%04X ", offset);
      offset += 16;
    }
    sprintf(str, " %02X", data[p]);
    strcat(the_packet, str);
  }
  if (strlen(the_packet))
    BX_DEBUG(("%s", the_packet));
}

开发者ID:iver6，项目名称:BA，代码行数:18，代码来源:usb_common.cpp

示例13: DEV_register_irq

void bx_pit_c::init(void)
{
  DEV_register_irq(0, "8254 PIT");
  DEV_register_ioread_handler(this, read_handler, 0x0040, "8254 PIT", 1);
  DEV_register_ioread_handler(this, read_handler, 0x0041, "8254 PIT", 1);
  DEV_register_ioread_handler(this, read_handler, 0x0042, "8254 PIT", 1);
  DEV_register_ioread_handler(this, read_handler, 0x0043, "8254 PIT", 1);
  DEV_register_ioread_handler(this, read_handler, 0x0061, "8254 PIT", 1);

  DEV_register_iowrite_handler(this, write_handler, 0x0040, "8254 PIT", 1);
  DEV_register_iowrite_handler(this, write_handler, 0x0041, "8254 PIT", 1);
  DEV_register_iowrite_handler(this, write_handler, 0x0042, "8254 PIT", 1);
  DEV_register_iowrite_handler(this, write_handler, 0x0043, "8254 PIT", 1);
  DEV_register_iowrite_handler(this, write_handler, 0x0061, "8254 PIT", 1);

  BX_DEBUG(("starting init"));

  BX_PIT_THIS s.speaker_data_on = 0;
  BX_PIT_THIS s.refresh_clock_div2 = 0;

  BX_PIT_THIS s.timer.init();
  BX_PIT_THIS s.timer.set_OUT_handler(0, irq_handler);

  Bit64u my_time_usec = bx_virt_timer.time_usec();

  if (BX_PIT_THIS s.timer_handle[0] == BX_NULL_TIMER_HANDLE) {
    BX_PIT_THIS s.timer_handle[0] = bx_virt_timer.register_timer(this, timer_handler, (unsigned) 100 , 1, 1, "pit_wrap");
  }
  BX_DEBUG(("RESETting timer."));
  bx_virt_timer.deactivate_timer(BX_PIT_THIS s.timer_handle[0]);
  BX_DEBUG(("deactivated timer."));
  if (BX_PIT_THIS s.timer.get_next_event_time()) {
    bx_virt_timer.activate_timer(BX_PIT_THIS s.timer_handle[0],
                                 (Bit32u)BX_MAX(1,TICKS_TO_USEC(BX_PIT_THIS s.timer.get_next_event_time())),
                                 0);
    BX_DEBUG(("activated timer."));
  }
  BX_PIT_THIS s.last_next_event_time = BX_PIT_THIS s.timer.get_next_event_time();
  BX_PIT_THIS s.last_usec = my_time_usec;

  BX_PIT_THIS s.total_ticks = 0;
  BX_PIT_THIS s.total_usec = 0;

  BX_DEBUG(("finished init"));

  BX_DEBUG(("s.last_usec="FMT_LL"d",BX_PIT_THIS s.last_usec));
  BX_DEBUG(("s.timer_id=%d",BX_PIT_THIS s.timer_handle[0]));
  BX_DEBUG(("s.timer.get_next_event_time=%d", BX_PIT_THIS s.timer.get_next_event_time()));
  BX_DEBUG(("s.last_next_event_time=%d", BX_PIT_THIS s.last_next_event_time));
}

开发者ID:iver6，项目名称:BA，代码行数:50，代码来源:pit_wrap.cpp

示例14: defined

void bx_tap_pktmover_c::sendpkt(void *buf, unsigned io_len)
{
  Bit8u txbuf[BX_PACKET_BUFSIZE];
  txbuf[0] = 0;
  txbuf[1] = 0;
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || \
   defined(__APPLE__)  || defined(__OpenBSD__) // Should be fixed for other *BSD
  memcpy(txbuf, buf, io_len);
  unsigned int size = write(fd, txbuf, io_len);
  if (size != io_len) {
#else
  memcpy(txbuf+2, buf, io_len);
  unsigned int size = write(fd, txbuf, io_len+2);
  if (size != io_len+2) {
#endif
    BX_PANIC(("write on tap device: %s", strerror(errno)));
  } else {
    BX_DEBUG(("wrote %d bytes + 2 byte pad on tap", io_len));
  }
#if BX_ETH_TAP_LOGGING
  BX_DEBUG(("sendpkt length %u", io_len));
  // dump raw bytes to a file, eventually dump in pcap format so that
  // tcpdump -r FILE can interpret them for us.
  int n = fwrite(buf, io_len, 1, txlog);
  if (n != 1) BX_ERROR(("fwrite to txlog failed, io_len = %u", io_len));
  // dump packet in hex into an ascii log file
  fprintf(txlog_txt, "NE2K transmitting a packet, length %u\n", io_len);
  Bit8u *charbuf = (Bit8u *)buf;
  for (n=0; n<(int)io_len; n++) {
    if (((n % 16) == 0) && n>0)
      fprintf(txlog_txt, "\n");
    fprintf(txlog_txt, "%02x ", charbuf[n]);
  }
  fprintf(txlog_txt, "\n--\n");
  // flush log so that we see the packets as they arrive w/o buffering
  fflush(txlog);
  fflush(txlog_txt);
#endif
}

void bx_tap_pktmover_c::rx_timer_handler(void *this_ptr)
{
  bx_tap_pktmover_c *class_ptr = (bx_tap_pktmover_c *) this_ptr;
  class_ptr->rx_timer();
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:45，代码来源:eth_tap.cpp

示例15: BX_DEBUG

void bx_arpback_pktmover_c::rx_timer_handler (void * this_ptr)
{
#if BX_ETH_NULL_LOGGING
  BX_DEBUG (("rx_timer_handler"));
#endif
  bx_arpback_pktmover_c *class_ptr = ((bx_arpback_pktmover_c *)this_ptr);

  class_ptr->rx_timer();
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:9，代码来源:eth_arpback.cpp

示例16: get_laddr

BX_CPU_C::read_virtual_dqword_aligned(unsigned s, bx_address offset, Bit8u *data)
{
  // If double quadword access is unaligned, #GP(0).
  bx_address laddr = BX_CPU_THIS_PTR get_laddr(s, offset);
  if (laddr & 0xf) {
    BX_DEBUG(("read_virtual_dqword_aligned(): access not aligned to 16-byte"));
    exception(BX_GP_EXCEPTION, 0, 0);
  }

  read_virtual_dqword(s, offset, data);
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:11，代码来源:access.cpp

示例17: get_segment_base

BX_CPU_C::write_virtual_dqword_aligned(unsigned s, bx_address offset, Bit8u *data)
{
  // If double quadword access is unaligned, #GP(0).
  bx_address laddr = BX_CPU_THIS_PTR get_segment_base(s) + offset;
  if (laddr & 0xf) {
    BX_DEBUG(("write_virtual_dqword_aligned: access not aligned to 16-byte"));
    exception(BX_GP_EXCEPTION, 0, 0);
  }

  write_virtual_dqword(s, offset, data);
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:11，代码来源:access.cpp

示例18: SetEvent

bx_bool serial_raw::ready_receive()
{
#ifdef WIN32_RECEIVE_RAW
  if ((rxdata_count == 0) && (thread_rxdata_count > 0)) {
    SetEvent(thread_ovl.hEvent);
    SetEvent(rx_ovl.hEvent);
  }
#endif
  BX_DEBUG (("ready_receive returning %d", (rxdata_count > 0)));
  return (rxdata_count > 0);
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:11，代码来源:serial_raw.cpp

示例19: BX_DEBUG

//
// read_cr/write_cr - utility routines for handling reads/writes to
// the Command Register
//
Bit32u
bx_ne2k_c::read_cr(void)
{
  Bit32u val = 
         (((BX_NE2K_THIS s.CR.pgsel    & 0x03) << 6) |
	  ((BX_NE2K_THIS s.CR.rdma_cmd & 0x07) << 3) |
	  (BX_NE2K_THIS s.CR.tx_packet << 2) |
	  (BX_NE2K_THIS s.CR.start     << 1) |
	  (BX_NE2K_THIS s.CR.stop));
  BX_DEBUG("read CR returns 0x%08x", val);
  return val;
}

开发者ID:gammy，项目名称:dosbox_ne2000，代码行数:16，代码来源:ne2000.cpp

示例20: BX_PANIC

void BX_CPU_C::get_SS_ESP_from_TSS(unsigned pl, Bit16u *ss, Bit32u *esp)
{
  if (BX_CPU_THIS_PTR tr.cache.valid==0)
    BX_PANIC(("get_SS_ESP_from_TSS: TR.cache invalid"));

  if (BX_CPU_THIS_PTR tr.cache.type==BX_SYS_SEGMENT_AVAIL_386_TSS ||
      BX_CPU_THIS_PTR tr.cache.type==BX_SYS_SEGMENT_BUSY_386_TSS)
  {
    // 32-bit TSS
    Bit32u TSSstackaddr = 8*pl + 4;
    if ((TSSstackaddr+7) > BX_CPU_THIS_PTR tr.cache.u.system.limit_scaled) {
      BX_DEBUG(("get_SS_ESP_from_TSS(386): TSSstackaddr > TSS.LIMIT"));
      exception(BX_TS_EXCEPTION, BX_CPU_THIS_PTR tr.selector.value & 0xfffc, 0);
    }
    access_read_linear(BX_CPU_THIS_PTR tr.cache.u.system.base +
      TSSstackaddr+4, 2, 0, BX_READ, ss);
    access_read_linear(BX_CPU_THIS_PTR tr.cache.u.system.base +
      TSSstackaddr,   4, 0, BX_READ, esp);
  }
  else if (BX_CPU_THIS_PTR tr.cache.type==BX_SYS_SEGMENT_AVAIL_286_TSS ||
           BX_CPU_THIS_PTR tr.cache.type==BX_SYS_SEGMENT_BUSY_286_TSS)
  {
    // 16-bit TSS
    Bit16u temp16;
    Bit32u TSSstackaddr = 4*pl + 2;
    if ((TSSstackaddr+4) > BX_CPU_THIS_PTR tr.cache.u.system.limit_scaled) {
      BX_DEBUG(("get_SS_ESP_from_TSS(286): TSSstackaddr > TSS.LIMIT"));
      exception(BX_TS_EXCEPTION, BX_CPU_THIS_PTR tr.selector.value & 0xfffc, 0);
    }
    access_read_linear(BX_CPU_THIS_PTR tr.cache.u.system.base +
      TSSstackaddr+2, 2, 0, BX_READ, ss);
    access_read_linear(BX_CPU_THIS_PTR tr.cache.u.system.base +
      TSSstackaddr,   2, 0, BX_READ, &temp16);
    *esp = temp16; // truncate
  }
  else {
    BX_PANIC(("get_SS_ESP_from_TSS: TR is bogus type (%u)",
             (unsigned) BX_CPU_THIS_PTR tr.cache.type));
  }
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:40，代码来源:tasking.cpp

注：本文中的BX_DEBUG函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BX_ERROR函数代码示例发布时间：2022-05-30

C++ BX_CHECK函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18821|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9873|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8284|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8640|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8570|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9575|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8565|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7959|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8567|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7497|2022-11-06

客服电话

电子邮件

C++ BX_DEBUG函数代码示例

示例1: defined

示例2: BX_DEBUG

示例3: setup_port

示例4: BX_DEBUG

示例5: BX_DEBUG

示例6: BX_DEBUG

示例7: BX_DEBUG

示例8: BX_DEBUG

示例9: while

示例10: UNUSED

示例11: invalidate_prefetch_q

示例12: strcpy

示例13: DEV_register_irq

示例14: defined

示例15: BX_DEBUG

示例16: get_laddr

示例17: get_segment_base

示例18: SetEvent

示例19: BX_DEBUG

示例20: BX_PANIC

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

CVE-2014-3658

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053