C++ BT_DBG函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BT_DBG函数的典型用法代码示例。如果您正苦于以下问题：C++ BT_DBG函数的具体用法？C++ BT_DBG怎么用？C++ BT_DBG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BT_DBG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: l2cap_sock_getsockopt

static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen)
{
	struct sock *sk = sock->sk;
	struct bt_security sec;
	struct bt_power pwr;
	int len, err = 0;

	BT_DBG("sk %p", sk);

	if (level == SOL_L2CAP)
		return l2cap_sock_getsockopt_old(sock, optname, optval, optlen);

	if (level != SOL_BLUETOOTH)
		return -ENOPROTOOPT;

	if (get_user(len, optlen))
		return -EFAULT;

	lock_sock(sk);

	switch (optname) {
	case BT_SECURITY:
		if (sk->sk_type != SOCK_SEQPACKET && sk->sk_type != SOCK_STREAM
				&& sk->sk_type != SOCK_RAW) {
			err = -EINVAL;
			break;
		}

		memset(&sec, 0, sizeof(sec));
		sec.level = l2cap_pi(sk)->sec_level;

		if (sk->sk_state == BT_CONNECTED) {
			sec.key_size = l2cap_pi(sk)->conn->hcon->enc_key_size;
			sec.level = l2cap_pi(sk)->conn->hcon->sec_level;
		}

		len = min_t(unsigned int, len, sizeof(sec));
		if (copy_to_user(optval, (char *) &sec, len))
			err = -EFAULT;

		break;

	case BT_DEFER_SETUP:
		if (sk->sk_state != BT_BOUND && sk->sk_state != BT_LISTEN) {
			err = -EINVAL;
			break;
		}

		if (put_user(bt_sk(sk)->defer_setup, (u32 __user *) optval))
			err = -EFAULT;

		break;

	case BT_POWER:
		if (sk->sk_type != SOCK_SEQPACKET && sk->sk_type != SOCK_STREAM
				&& sk->sk_type != SOCK_RAW) {
			err = -EINVAL;
			break;
		}

		pwr.force_active = l2cap_pi(sk)->force_active;

		len = min_t(unsigned int, len, sizeof(pwr));
		if (copy_to_user(optval, (char *) &pwr, len))
			err = -EFAULT;

		break;

	case BT_AMP_POLICY:
		if (put_user(l2cap_pi(sk)->amp_pref, (u32 __user *) optval))
			err = -EFAULT;
		break;

	case BT_LE_PARAMS:
		if (l2cap_pi(sk)->scid != L2CAP_CID_LE_DATA) {
			err = -EINVAL;
			break;
		}

		if (copy_to_user(optval, (char *) &bt_sk(sk)->le_params,
						sizeof(bt_sk(sk)->le_params)))
			err = -EFAULT;
		break;

	default:
		err = -ENOPROTOOPT;
		break;
	}

	release_sock(sk);
	return err;
}

开发者ID:emreharbutoglu，项目名称:gp-peak-kernel，代码行数:92，代码来源:l2cap_sock.c

示例2: hci_conn_complete_evt

static inline void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
	struct hci_ev_conn_complete *ev = (void *) skb->data;
	struct hci_conn *conn;

	BT_DBG("%s", hdev->name);

	hci_dev_lock(hdev);

	conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
	if (!conn) {
		if (ev->link_type != SCO_LINK)
			goto unlock;

		conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr);
		if (!conn)
			goto unlock;

		conn->type = SCO_LINK;
	}

	if (!ev->status) {
		conn->handle = __le16_to_cpu(ev->handle);

		if (conn->type == ACL_LINK) {
			conn->state = BT_CONFIG;
			hci_conn_hold(conn);
			conn->disc_timeout = HCI_DISCONN_TIMEOUT;
		} else
			conn->state = BT_CONNECTED;

		hci_conn_hold_device(conn);
		hci_conn_add_sysfs(conn);

		if (test_bit(HCI_AUTH, &hdev->flags))
			conn->link_mode |= HCI_LM_AUTH;

		if (test_bit(HCI_ENCRYPT, &hdev->flags))
			conn->link_mode |= HCI_LM_ENCRYPT;

		/* Get remote features */
		if (conn->type == ACL_LINK) {
			struct hci_cp_read_remote_features cp;
			cp.handle = ev->handle;
			hci_send_cmd(hdev, HCI_OP_READ_REMOTE_FEATURES,
							sizeof(cp), &cp);
		}

		/* Set packet type for incoming connection */
		if (!conn->out && hdev->hci_ver < 3) {
			struct hci_cp_change_conn_ptype cp;
			cp.handle = ev->handle;
			cp.pkt_type = cpu_to_le16(conn->pkt_type);
			hci_send_cmd(hdev, HCI_OP_CHANGE_CONN_PTYPE,
							sizeof(cp), &cp);
		}
	} else
		conn->state = BT_CLOSED;

	if (conn->type == ACL_LINK) {
		struct hci_conn *sco = conn->link;
		if (sco) {
			if (!ev->status) {
				if (lmp_esco_capable(hdev))
					hci_setup_sync(sco, conn->handle);
				else
					hci_add_sco(sco, conn->handle);
			} else {
				hci_proto_connect_cfm(sco, ev->status);
				hci_conn_del(sco);
			}
		}
	}

	if (ev->status) {
		hci_proto_connect_cfm(conn, ev->status);
		hci_conn_del(conn);
	} else if (ev->link_type != ACL_LINK)
		hci_proto_connect_cfm(conn, ev->status);

unlock:
	hci_dev_unlock(hdev);

	hci_conn_check_pending(hdev);
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:85，代码来源:hci_event.c

示例3: bnep_net_set_mac_addr

static int bnep_net_set_mac_addr(struct net_device *dev, void *arg)
{
	BT_DBG("%s", dev->name);
	return 0;
}

开发者ID:venkatarajasekhar，项目名称:kernel_raybst，代码行数:5，代码来源:netdev.c

示例4: hci_sync_conn_changed_evt

static inline void hci_sync_conn_changed_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
	BT_DBG("%s", hdev->name);
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:4，代码来源:hci_event.c

示例5: hci_cs_remote_name_req

static void hci_cs_remote_name_req(struct hci_dev *hdev, __u8 status)
{
	BT_DBG("%s status 0x%x", hdev->name, status);
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:4，代码来源:hci_event.c

示例6: hci_qos_setup_complete_evt

static inline void hci_qos_setup_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
	BT_DBG("%s", hdev->name);
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:4，代码来源:hci_event.c

示例7: hci_cmd_status_evt

static inline void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
	struct hci_ev_cmd_status *ev = (void *) skb->data;
	__u16 opcode;

	skb_pull(skb, sizeof(*ev));

	opcode = __le16_to_cpu(ev->opcode);

	switch (opcode) {
	case HCI_OP_INQUIRY:
		hci_cs_inquiry(hdev, ev->status);
		break;

	case HCI_OP_CREATE_CONN:
		hci_cs_create_conn(hdev, ev->status);
		break;

	case HCI_OP_ADD_SCO:
		hci_cs_add_sco(hdev, ev->status);
		break;

	case HCI_OP_AUTH_REQUESTED:
		hci_cs_auth_requested(hdev, ev->status);
		break;

	case HCI_OP_SET_CONN_ENCRYPT:
		hci_cs_set_conn_encrypt(hdev, ev->status);
		break;

	case HCI_OP_REMOTE_NAME_REQ:
		hci_cs_remote_name_req(hdev, ev->status);
		break;

	case HCI_OP_READ_REMOTE_FEATURES:
		hci_cs_read_remote_features(hdev, ev->status);
		break;

	case HCI_OP_READ_REMOTE_EXT_FEATURES:
		hci_cs_read_remote_ext_features(hdev, ev->status);
		break;

	case HCI_OP_SETUP_SYNC_CONN:
		hci_cs_setup_sync_conn(hdev, ev->status);
		break;

	case HCI_OP_SNIFF_MODE:
		hci_cs_sniff_mode(hdev, ev->status);
		break;

	case HCI_OP_EXIT_SNIFF_MODE:
		hci_cs_exit_sniff_mode(hdev, ev->status);
		break;

	default:
		BT_DBG("%s opcode 0x%x", hdev->name, opcode);
		break;
	}

	if (ev->ncmd) {
		atomic_set(&hdev->cmd_cnt, 1);
		if (!skb_queue_empty(&hdev->cmd_q))
			tasklet_schedule(&hdev->cmd_task);
	}
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:65，代码来源:hci_event.c

示例8: on_nble_gap_connect_evt

void on_nble_gap_connect_evt(const struct nble_gap_connect_evt *evt)
{
    struct bt_conn *conn;

    /* Make lookup to check if there's a connection object in CONNECT state
     * associated with passed peer LE address.
     */
    conn = bt_conn_lookup_state_le(&evt->peer_bda, BT_CONN_CONNECT);

#if 0
    /* Nordic has no connection error */
    if (evt->status) {
        if (!conn) {
            return;
        }

        conn->err = BT_HCI_ERR_UNACCEPT_CONN_PARAMS;
        bt_conn_set_state(conn, BT_CONN_DISCONNECTED);

        /* Drop the reference got by lookup call in CONNECT state.
         * We are now in DISCONNECTED state since no successful LE
         * link been made.
         */
        bt_conn_unref(conn);

        return;
    }
#endif
    /*
     * clear advertising even if we are not able to add connection object
     * to keep host in sync with controller state
     */
    if (evt->role_slave == BT_CONN_ROLE_SLAVE) {
        atomic_clear_bit(bt_dev.flags, BT_DEV_ADVERTISING);
    }

    if (!conn) {
        conn = bt_conn_add_le(&evt->peer_bda);
    }

    if (!conn) {
        BT_DBG("Unable to add new conn for handle %u",
               evt->conn_handle);
        return;
    }

    conn->handle = evt->conn_handle;
    bt_addr_le_copy(&conn->le.dst, &evt->peer_bda);
    conn->le.interval = evt->conn_values.interval;
    conn->le.latency = evt->conn_values.latency;
    conn->le.timeout = evt->conn_values.supervision_to;
    conn->role = evt->role_slave;

#if 0
    src.type = BT_ADDR_LE_PUBLIC;
    memcpy(src.val, bt_dev.bdaddr.val, sizeof(bt_dev.bdaddr.val));

    /* use connection address (instead of identity address) as initiator
     * or responder address
     */
    if (conn->role == BT_HCI_ROLE_MASTER) {
        bt_addr_le_copy(&conn->le.init_addr, &src);
        bt_addr_le_copy(&conn->le.resp_addr, &evt->peer_addr);
    } else {
        bt_addr_le_copy(&conn->le.init_addr, &evt->peer_addr);
        bt_addr_le_copy(&conn->le.resp_addr, &src);
    }
#endif
    bt_conn_set_state(conn, BT_CONN_CONNECTED);

    /* Note: Connection update removed because Windows interop and BT spec recommendations */

    bt_conn_unref(conn);
#if 0
    bt_le_scan_update(false);
#endif

}

开发者ID:sandeepmistry，项目名称:corelibs-arduino101，代码行数:78，代码来源:gap.c

示例9: on_nble_up

void on_nble_up(void)
{
    BT_DBG("%s", __FUNCTION__);
    if (bt_ready_cb)
        bt_ready_cb(bt_init());
}

开发者ID:sandeepmistry，项目名称:corelibs-arduino101，代码行数:6，代码来源:gap.c

示例10: l2cap_sock_clear_timer

void l2cap_sock_clear_timer(struct sock *sk)
{
	BT_DBG("sock %p state %d", sk, sk->sk_state);
	sk_stop_timer(sk, &sk->sk_timer);
}

开发者ID:emreharbutoglu，项目名称:gp-peak-kernel，代码行数:5，代码来源:l2cap_sock.c

示例11: l2cap_sock_sendmsg

static int l2cap_sock_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg, size_t len)
{
	struct sock *sk = sock->sk;
	struct l2cap_pinfo *pi = l2cap_pi(sk);
	struct sk_buff *skb;
	struct sk_buff_head seg_queue;
	int err;
	u8 amp_id;

	BT_DBG("sock %p, sk %p", sock, sk);

	err = sock_error(sk);
	if (err)
		return err;

	if (msg->msg_flags & MSG_OOB)
		return -EOPNOTSUPP;

	lock_sock(sk);

	if (sk->sk_state != BT_CONNECTED) {
		err = -ENOTCONN;
		goto done;
	}

	/* Connectionless channel */
	if (sk->sk_type == SOCK_DGRAM) {
		skb = l2cap_create_connless_pdu(sk, msg, len);
		if (IS_ERR(skb)) {
			err = PTR_ERR(skb);
		} else {
			l2cap_do_send(sk, skb);
			err = len;
		}
		goto done;
	}

	switch (pi->mode) {
	case L2CAP_MODE_BASIC:
		/* Check outgoing MTU */
		if (len > pi->omtu) {
			err = -EMSGSIZE;
			goto done;
		}

		/* Create a basic PDU */
		skb = l2cap_create_basic_pdu(sk, msg, len);
		if (IS_ERR(skb)) {
			err = PTR_ERR(skb);
			goto done;
		}

		l2cap_do_send(sk, skb);
		err = len;
		break;

	case L2CAP_MODE_ERTM:
	case L2CAP_MODE_STREAMING:

		/* Check outgoing MTU */
		if (len > pi->omtu) {
			err = -EMSGSIZE;
			goto done;
		}

		__skb_queue_head_init(&seg_queue);

		/* Do segmentation before calling in to the state machine,
		 * since it's possible to block while waiting for memory
		 * allocation.
		 */
		amp_id = pi->amp_id;
		err = l2cap_segment_sdu(sk, &seg_queue, msg, len, 0);

		/* The socket lock is released while segmenting, so check
		 * that the socket is still connected
		 */
		if (sk->sk_state != BT_CONNECTED) {
			__skb_queue_purge(&seg_queue);
			err = -ENOTCONN;
		}

		if (err) {
			BT_DBG("Error %d, sk_sndbuf %d, sk_wmem_alloc %d",
				err, sk->sk_sndbuf,
				atomic_read(&sk->sk_wmem_alloc));
			break;
		}

		if (pi->amp_id != amp_id) {
			/* Channel moved while unlocked. Resegment. */
			err = l2cap_resegment_queue(sk, &seg_queue);

			if (err)
				break;
		}

		if (pi->mode != L2CAP_MODE_STREAMING)
			err = l2cap_ertm_tx(sk, 0, &seg_queue,
				L2CAP_ERTM_EVENT_DATA_REQUEST);
//.........这里部分代码省略.........

开发者ID:emreharbutoglu，项目名称:gp-peak-kernel，代码行数:101，代码来源:l2cap_sock.c

示例12: l2cap_sock_setsockopt

static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
{
	struct sock *sk = sock->sk;
	struct bt_security sec;
	struct bt_power pwr;
	struct bt_le_params le_params;
	struct l2cap_conn *conn;
	int len, err = 0;
	u32 opt;

	BT_DBG("sk %p", sk);

	if (level == SOL_L2CAP)
		return l2cap_sock_setsockopt_old(sock, optname, optval, optlen);

	if (level != SOL_BLUETOOTH)
		return -ENOPROTOOPT;

	lock_sock(sk);

	switch (optname) {
	case BT_SECURITY:
		if (sk->sk_type != SOCK_SEQPACKET && sk->sk_type != SOCK_STREAM
				&& sk->sk_type != SOCK_RAW) {
			err = -EINVAL;
			break;
		}

		sec.level = BT_SECURITY_LOW;

		len = min_t(unsigned int, sizeof(sec), optlen);
		if (copy_from_user((char *) &sec, optval, len)) {
			err = -EFAULT;
			break;
		}

		if (sec.level < BT_SECURITY_LOW ||
					sec.level > BT_SECURITY_HIGH) {
			err = -EINVAL;
			break;
		}

		l2cap_pi(sk)->sec_level = sec.level;

		conn = l2cap_pi(sk)->conn;
		if (conn && l2cap_pi(sk)->scid == L2CAP_CID_LE_DATA) {
			if (!conn->hcon->out) {
				err = -EINVAL;
				break;
			}

			if (smp_conn_security(conn, sec.level))
				break;

			err = 0;
			sk->sk_state = BT_CONFIG;
		}
		break;

	case BT_DEFER_SETUP:
		if (sk->sk_state != BT_BOUND && sk->sk_state != BT_LISTEN) {
			err = -EINVAL;
			break;
		}

		if (get_user(opt, (u32 __user *) optval)) {
			err = -EFAULT;
			break;
		}

		bt_sk(sk)->defer_setup = opt;
		break;

	case BT_POWER:
		if (sk->sk_type != SOCK_SEQPACKET && sk->sk_type != SOCK_STREAM
				&& sk->sk_type != SOCK_RAW) {
			err = -EINVAL;
			break;
		}

		pwr.force_active = 1;

		len = min_t(unsigned int, sizeof(pwr), optlen);
		if (copy_from_user((char *) &pwr, optval, len)) {
			err = -EFAULT;
			break;
		}
		l2cap_pi(sk)->force_active = pwr.force_active;
		break;

	case BT_AMP_POLICY:
		if (get_user(opt, (u32 __user *) optval)) {
			err = -EFAULT;
			break;
		}

		if ((opt > BT_AMP_POLICY_PREFER_AMP) ||
			((l2cap_pi(sk)->mode != L2CAP_MODE_ERTM) &&
			 (l2cap_pi(sk)->mode != L2CAP_MODE_STREAMING))) {
			err = -EINVAL;
//.........这里部分代码省略.........

开发者ID:emreharbutoglu，项目名称:gp-peak-kernel，代码行数:101，代码来源:l2cap_sock.c

示例13: l2cap_sock_set_timer

void l2cap_sock_set_timer(struct sock *sk, long timeout)
{
	BT_DBG("sk %p state %d timeout %ld", sk, sk->sk_state, timeout);
	sk_reset_timer(sk, &sk->sk_timer, jiffies + timeout);
}

开发者ID:emreharbutoglu，项目名称:gp-peak-kernel，代码行数:5，代码来源:l2cap_sock.c

示例14: l2cap_sock_setsockopt_old

static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
{
	struct sock *sk = sock->sk;
	struct l2cap_options opts;
	int len, le_sock, err = 0;
	u32 opt;

	BT_DBG("sk %p", sk);

	lock_sock(sk);

	le_sock = l2cap_pi(sk)->scid == L2CAP_CID_LE_DATA;

	switch (optname) {
	case L2CAP_OPTIONS:
		if (sk->sk_state == BT_CONNECTED && !le_sock) {
			err = -EINVAL;
			break;
		}

		opts.imtu     = l2cap_pi(sk)->imtu;
		opts.omtu     = l2cap_pi(sk)->omtu;
		opts.flush_to = l2cap_pi(sk)->flush_to;
		opts.mode     = l2cap_pi(sk)->mode;
		opts.fcs      = l2cap_pi(sk)->fcs;
		opts.max_tx   = l2cap_pi(sk)->max_tx;
		opts.txwin_size = l2cap_pi(sk)->tx_win;

		len = min_t(unsigned int, sizeof(opts), optlen);
		if (copy_from_user((char *) &opts, optval, len)) {
			err = -EFAULT;
			break;
		}

		if ((opts.imtu || opts.omtu) && le_sock &&
				(sk->sk_state == BT_CONNECTED)) {
			if (opts.imtu >= L2CAP_LE_DEFAULT_MTU)
				l2cap_pi(sk)->imtu = opts.imtu;
			if (opts.omtu >= L2CAP_LE_DEFAULT_MTU)
				l2cap_pi(sk)->omtu = opts.omtu;
			if (opts.imtu < L2CAP_LE_DEFAULT_MTU ||
					opts.omtu < L2CAP_LE_DEFAULT_MTU)
				err = -EINVAL;
			break;
		}

		if (opts.txwin_size < 1 ||
			opts.txwin_size > L2CAP_TX_WIN_MAX_EXTENDED) {
			err = -EINVAL;
			break;
		}

		l2cap_pi(sk)->mode = opts.mode;
		switch (l2cap_pi(sk)->mode) {
		case L2CAP_MODE_BASIC:
			l2cap_pi(sk)->conf_state &= ~L2CAP_CONF_STATE2_DEVICE;
			break;
		case L2CAP_MODE_STREAMING:
			if (!disable_ertm) {
				/* No fallback to ERTM or Basic mode */
				l2cap_pi(sk)->conf_state |=
						L2CAP_CONF_STATE2_DEVICE;
				break;
			}
			err = -EINVAL;
			break;
		case L2CAP_MODE_ERTM:
			if (!disable_ertm)
				break;
			/* fall through */
		default:
			err = -EINVAL;
			break;
		}

		l2cap_pi(sk)->imtu = opts.imtu;
		l2cap_pi(sk)->omtu = opts.omtu;
		l2cap_pi(sk)->fcs  = opts.fcs;
		l2cap_pi(sk)->max_tx = opts.max_tx;
		l2cap_pi(sk)->tx_win = opts.txwin_size;
		l2cap_pi(sk)->flush_to = opts.flush_to;
		break;

	case L2CAP_LM:
		if (get_user(opt, (u32 __user *) optval)) {
			err = -EFAULT;
			break;
		}

		if (opt & L2CAP_LM_AUTH)
			l2cap_pi(sk)->sec_level = BT_SECURITY_LOW;
		if (opt & L2CAP_LM_ENCRYPT)
			l2cap_pi(sk)->sec_level = BT_SECURITY_MEDIUM;
		if (opt & L2CAP_LM_SECURE)
			l2cap_pi(sk)->sec_level = BT_SECURITY_HIGH;

		l2cap_pi(sk)->role_switch    = (opt & L2CAP_LM_MASTER);
		l2cap_pi(sk)->force_reliable = (opt & L2CAP_LM_RELIABLE);
		l2cap_pi(sk)->flushable = (opt & L2CAP_LM_FLUSHABLE);
		break;
//.........这里部分代码省略.........

开发者ID:emreharbutoglu，项目名称:gp-peak-kernel，代码行数:101，代码来源:l2cap_sock.c

示例15: hci_remote_name_evt

static inline void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
	BT_DBG("%s", hdev->name);

	hci_conn_check_pending(hdev);
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:6，代码来源:hci_event.c

示例16: hci_remote_version_evt

static inline void hci_remote_version_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
	BT_DBG("%s", hdev->name);
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:4，代码来源:hci_event.c

示例17: hci_cmd_complete_evt


//.........这里部分代码省略.........
		hci_cc_read_def_link_policy(hdev, skb);
		break;

	case HCI_OP_WRITE_DEF_LINK_POLICY:
		hci_cc_write_def_link_policy(hdev, skb);
		break;

	case HCI_OP_RESET:
		hci_cc_reset(hdev, skb);
		break;

	case HCI_OP_WRITE_LOCAL_NAME:
		hci_cc_write_local_name(hdev, skb);
		break;

	case HCI_OP_READ_LOCAL_NAME:
		hci_cc_read_local_name(hdev, skb);
		break;

	case HCI_OP_WRITE_AUTH_ENABLE:
		hci_cc_write_auth_enable(hdev, skb);
		break;

	case HCI_OP_WRITE_ENCRYPT_MODE:
		hci_cc_write_encrypt_mode(hdev, skb);
		break;

	case HCI_OP_WRITE_SCAN_ENABLE:
		hci_cc_write_scan_enable(hdev, skb);
		break;

	case HCI_OP_READ_CLASS_OF_DEV:
		hci_cc_read_class_of_dev(hdev, skb);
		break;

	case HCI_OP_WRITE_CLASS_OF_DEV:
		hci_cc_write_class_of_dev(hdev, skb);
		break;

	case HCI_OP_READ_VOICE_SETTING:
		hci_cc_read_voice_setting(hdev, skb);
		break;

	case HCI_OP_WRITE_VOICE_SETTING:
		hci_cc_write_voice_setting(hdev, skb);
		break;

	case HCI_OP_HOST_BUFFER_SIZE:
		hci_cc_host_buffer_size(hdev, skb);
		break;

	case HCI_OP_READ_SSP_MODE:
		hci_cc_read_ssp_mode(hdev, skb);
		break;

	case HCI_OP_WRITE_SSP_MODE:
		hci_cc_write_ssp_mode(hdev, skb);
		break;

	case HCI_OP_READ_LOCAL_VERSION:
		hci_cc_read_local_version(hdev, skb);
		break;

	case HCI_OP_READ_LOCAL_COMMANDS:
		hci_cc_read_local_commands(hdev, skb);
		break;

	case HCI_OP_READ_LOCAL_FEATURES:
		hci_cc_read_local_features(hdev, skb);
		break;

	case HCI_OP_READ_BUFFER_SIZE:
		hci_cc_read_buffer_size(hdev, skb);
		break;

	case HCI_OP_READ_BD_ADDR:
		hci_cc_read_bd_addr(hdev, skb);
		break;

#ifdef CONFIG_BT_DEVICE
    case HCI_OP_INQUIRY:
    case 0x0403:
        if(!hdev->inquiry_state){
            hdev->inquiry_state = 1;
            tasklet_disable(&hdev->tx_task);
        }
        break;
#endif

	default:
		BT_DBG("%s opcode 0x%x", hdev->name, opcode);
		break;
	}

	if (ev->ncmd) {
		atomic_set(&hdev->cmd_cnt, 1);
		if (!skb_queue_empty(&hdev->cmd_q))
			tasklet_schedule(&hdev->cmd_task);
	}
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:101，代码来源:hci_event.c

示例18: hci_link_key_request_evt

static inline void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
	BT_DBG("%s", hdev->name);
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:4，代码来源:hci_event.c

示例19: hci_event_packet


//.........这里部分代码省略.........
	case HCI_EV_REMOTE_FEATURES:
		hci_remote_features_evt(hdev, skb);
		break;

	case HCI_EV_REMOTE_VERSION:
		hci_remote_version_evt(hdev, skb);
		break;

	case HCI_EV_QOS_SETUP_COMPLETE:
		hci_qos_setup_complete_evt(hdev, skb);
		break;

	case HCI_EV_CMD_COMPLETE:
		hci_cmd_complete_evt(hdev, skb);
		break;

	case HCI_EV_CMD_STATUS:
		hci_cmd_status_evt(hdev, skb);
		break;

	case HCI_EV_ROLE_CHANGE:
		hci_role_change_evt(hdev, skb);
		break;

	case HCI_EV_NUM_COMP_PKTS:
		hci_num_comp_pkts_evt(hdev, skb);
		break;

	case HCI_EV_MODE_CHANGE:
		hci_mode_change_evt(hdev, skb);
		break;

	case HCI_EV_PIN_CODE_REQ:
		hci_pin_code_request_evt(hdev, skb);
		break;

	case HCI_EV_LINK_KEY_REQ:
		hci_link_key_request_evt(hdev, skb);
		break;

	case HCI_EV_LINK_KEY_NOTIFY:
		hci_link_key_notify_evt(hdev, skb);
		break;

	case HCI_EV_CLOCK_OFFSET:
		hci_clock_offset_evt(hdev, skb);
		break;

	case HCI_EV_PKT_TYPE_CHANGE:
		hci_pkt_type_change_evt(hdev, skb);
		break;

	case HCI_EV_PSCAN_REP_MODE:
		hci_pscan_rep_mode_evt(hdev, skb);
		break;

	case HCI_EV_INQUIRY_RESULT_WITH_RSSI:
		hci_inquiry_result_with_rssi_evt(hdev, skb);
		break;

	case HCI_EV_REMOTE_EXT_FEATURES:
		hci_remote_ext_features_evt(hdev, skb);
		break;

	case HCI_EV_SYNC_CONN_COMPLETE:
		hci_sync_conn_complete_evt(hdev, skb);
		break;

	case HCI_EV_SYNC_CONN_CHANGED:
		hci_sync_conn_changed_evt(hdev, skb);
		break;

	case HCI_EV_SNIFF_SUBRATE:
		hci_sniff_subrate_evt(hdev, skb);
		break;

	case HCI_EV_EXTENDED_INQUIRY_RESULT:
		hci_extended_inquiry_result_evt(hdev, skb);
		break;

	case HCI_EV_IO_CAPA_REQUEST:
		hci_io_capa_request_evt(hdev, skb);
		break;

	case HCI_EV_SIMPLE_PAIR_COMPLETE:
		hci_simple_pair_complete_evt(hdev, skb);
		break;

	case HCI_EV_REMOTE_HOST_FEATURES:
		hci_remote_host_features_evt(hdev, skb);
		break;

	default:
		BT_DBG("%s event 0x%x", hdev->name, event);
		break;
	}

	kfree_skb(skb);
	hdev->stat.evt_rx++;
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:101，代码来源:hci_event.c

示例20: hci_cc_remote_name_req_cancel

static void hci_cc_remote_name_req_cancel(struct hci_dev *hdev, struct sk_buff *skb)
{
	BT_DBG("%s", hdev->name);
}

开发者ID:KaZoom，项目名称:buildroot-linux-kernel，代码行数:4，代码来源:hci_event.c

注：本文中的BT_DBG函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BT_ERR函数代码示例发布时间：2022-05-30

C++ BTVECTOR3_USE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：16205|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：8870|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：7551|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：7937|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：7834|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：8590|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：7817|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7228|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：7740|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：6833|2022-11-06

客服电话

电子邮件

C++ BT_DBG函数代码示例

示例1: l2cap_sock_getsockopt

示例2: hci_conn_complete_evt

示例3: bnep_net_set_mac_addr

示例4: hci_sync_conn_changed_evt

示例5: hci_cs_remote_name_req

示例6: hci_qos_setup_complete_evt

示例7: hci_cmd_status_evt

示例8: on_nble_gap_connect_evt

示例9: on_nble_up

示例10: l2cap_sock_clear_timer

示例11: l2cap_sock_sendmsg

示例12: l2cap_sock_setsockopt

示例13: l2cap_sock_set_timer

示例14: l2cap_sock_setsockopt_old

示例15: hci_remote_name_evt

示例16: hci_remote_version_evt

示例17: hci_cmd_complete_evt

示例18: hci_link_key_request_evt

示例19: hci_event_packet

示例20: hci_cc_remote_name_req_cancel

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

firmadyne/firmadyne: Platform for emulat

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053