java - Why is System.nanoTime() way slower (in performance) than System.currentTimeMillis()?

Question

Today I did a little quick Benchmark to test speed performance of System.nanoTime() and System.currentTimeMillis():

long startTime = System.nanoTime();

for(int i = 0; i < 1000000; i++) {
  long test = System.nanoTime();
}

long endTime = System.nanoTime();

System.out.println("Total time: "+(endTime-startTime));

This are the results:

System.currentTimeMillis(): average of 12.7836022 / function call
System.nanoTime():          average of 34.6395674 / function call

Why are the differences in running speed so big?

Benchmark system:

Java 1.7.0_25
Windows 8 64-bit
CPU: AMD FX-6100

Answer 1

From this Oracle blog:

System.currentTimeMillis() is implemented using the GetSystemTimeAsFileTime method, which essentially just reads the low resolution time-of-day value that Windows maintains. Reading this global variable is naturally very quick - around 6 cycles according to reported information.

System.nanoTime() is implemented using the QueryPerformanceCounter/ QueryPerformanceFrequency API (if available, else it returns currentTimeMillis*10^6). QueryPerformanceCounter(QPC) is implemented in different ways depending on the hardware it's running on. Typically it will use either the programmable-interval-timer (PIT), or the ACPI power management timer (PMT), or the CPU-level timestamp-counter (TSC). Accessing the PIT/PMT requires execution of slow I/O port instructions and as a result the execution time for QPC is in the order of microseconds. In contrast reading the TSC is on the order of 100 clock cycles (to read the TSC from the chip and convert it to a time value based on the operating frequency).

Perhaps this answer the question. The two methods use different number of clock cycles, thus resulting in slow speed of the later one.

Further in that blog in the conclusion section:

If you are interested in measuring/calculating elapsed time, then always use System.nanoTime(). On most systems it will give a resolution on the order of microseconds. Be aware though, this call can also take microseconds to execute on some platforms.