winapi - How do you set the glass blend colour on Windows 10?

Question

Using the undocumented SetWindowCompositionAttribute API on Windows 10, it's possible to enable glass for a window. The glass is white or clear, as seen in this screenshot:

However, the Windows 10 Start menu and the notification center, which both also uses glass, both blend with the accent colour, like so:

How does it do it?

Investigations

The accent colour in the following examples is a light purple - here's a screenshot from the Settings app:

The AccentPolicy structure defined in this example code has accent state, flags and gradient color fields:

  AccentPolicy = packed record
    AccentState: Integer;
    AccentFlags: Integer;
    GradientColor: Integer;
    AnimationId: Integer;
  end;

and the state can have any of these values:

  ACCENT_ENABLE_GRADIENT = 1;
  ACCENT_ENABLE_TRANSPARENTGRADIENT = 2;
  ACCENT_ENABLE_BLURBEHIND = 3;

Note that the first two of these were found on this github gist.

The third works fine - that enables glass. Of the other two,

• ACCENT_ENABLE_GRADIENT results in a window that is completely gray, regardless of what is behind it. There is no transparency or glass effect, but the window colour being drawn is being drawn by the DWM, not by the app.

• ACCENT_ENABLE_TRANSPARENTGRADIENT results in a window that is painted completely with the accent colour, regardless of what is behind it. There is no transparency or glass effect, but the window colour being drawn is being drawn by the DWM, not by the app.

So this is getting close, and it seems to be what some of the popup windows like the volume control applet use.

The values can't be or-ed together, and the value of the GradientColor field has no effect except that it must be non-zero.

Drawing directly on a glass-enabled window results in very odd blending. Here it's filling the client area with red (0x000000FF in ABGR format):

and any non-zero alpha, eg 0xAA0000FF, results in no colour at all:

Neither match the look of the Start menu or notification area.

How do those windows do it?

Answer 1

Since GDI forms on Delphi don't support alpha channels (unless using alpha layered windows, which might not be suitable), commonly the black color will be taken as the transparent one, unless the component supports alpha channels.

tl;dr Just use your TTransparentCanvas class, .Rectangle(0,0,Width+1,Height+1,222), using the color obtained with DwmGetColorizationColor that you could blend with a dark color.

The following will use TImage component instead.

I'm going to use a TImage and TImage32 (Graphics32) to show the difference with alpha channels. This is a borderless form, because borders won't accept our colorization.

As you can see, the left one is using TImage1 and is affected by Aero Glass, and the right one is using TGraphics32, which allows to overlay with opaque colors (no translucent).

Now, we will be using a TImage1 with a translucent PNG that we can create with the following code:

procedure SetAlphaColorPicture(
  const Col: TColor;
  const Alpha: Integer;
  Picture: TPicture;
  const _width: Integer;
  const _height: Integer
  );
var
  png: TPngImage;
  x,y: integer;
  sl: pByteArray;
begin

  png := TPngImage.CreateBlank(COLOR_RGBALPHA, 8, _width, _height);
  try

    png.Canvas.Brush.Color := Col;
    png.Canvas.FillRect(Rect(0,0,_width,_height)); 
    for y := 0 to png.Height - 1 do
    begin
      sl := png.AlphaScanline[y];
      FillChar(sl^, png.Width, Alpha);
    end;

    Picture.Assign(png);

  finally
    png.Free;
  end;
end;

We need to add another TImage component to our form and send it back so other components won't be below it.

SetAlphaColorPicture(clblack, 200, Image1.Picture, 10,10  );
Image1.Align := alClient;
Image1.Stretch := True;
Image1.Visible := True;

And that's is how our form will look like the Start Menu.

Now, to get the accent color use DwmGetColorizationColor, which is already defined in DwmAPI.pas

function TForm1.GetAccentColor:TColor;
var
  col: cardinal;
  opaque: longbool;
  newcolor: TColor;
  a,r,g,b: byte;
begin
  DwmGetColorizationColor(col, opaque);
  a := Byte(col shr 24);
  r := Byte(col shr 16);
  g := Byte(col shr 8);
  b := Byte(col);

  newcolor := RGB(
      round(r*(a/255)+255-a),
      round(g*(a/255)+255-a),
      round(b*(a/255)+255-a)
  );

  Result := newcolor;

end;

However, that color won't be dark enough as shown by the Start Menu.

So we need to blend the accent color with a dark color:

//Credits to Roy M Klever http://rmklever.com/?p=116
function TForm1.BlendColors(Col1, Col2: TColor; A: Byte): TColor;
var
  c1,c2: LongInt;
  r,g,b,v1,v2: byte;
begin
  A := Round(2.55 * A);
  c1 := ColorToRGB(Col1);
  c2 := ColorToRGB(Col2);
  v1 := Byte(c1);
  v2 := Byte(c2);
  r := A * (v1 - v2) shr 8 + v2;
  v1 := Byte(c1 shr 8);
  v2 := Byte(c2 shr 8);
  g := A * (v1 - v2) shr 8 + v2;
  v1 := Byte(c1 shr 16);
  v2 := Byte(c2 shr 16);
  b := A * (v1 - v2) shr 8 + v2;
  Result := (b shl 16) + (g shl 8) + r;
end;

...

SetAlphaColorPicture(BlendColors(GetAccentColor, clBlack, 50) , 222, Image1.Picture, 10, 10);

And this is the result blending clBlack with the Accent color by 50%:

There are other things that you might want to add, like for example detecting when the accent color changes and automatically update our app color too, for example:

procedure WndProc(var Message: TMessage);override;
...
procedure TForm1.WndProc(var Message: TMessage);
const
  WM_DWMCOLORIZATIONCOLORCHANGED = $0320;
begin
  if Message.Msg = WM_DWMCOLORIZATIONCOLORCHANGED then
  begin
      // here we update the TImage with the new color
  end;
  inherited WndProc(Message);
end;   

To maintain consistency with Windows 10 start menu settings, you can read the registry to find out if the Taskbar/StartMenu is translucent (enabled) and the start menu is enabled to use the accent color or just a black background, to do so this keys will tell us:

'SOFTWAREMicrosoftWindowsCurrentVersionThemesPersonalize'
ColorPrevalence = 1 or 0 (enabled / disabled)
EnableTransparency = 1 or 0

This is the full code, you need TImage1, TImage2, for the colorization, the other ones are not optional.

unit Unit1;

interface

uses
  Winapi.Windows, Winapi.Messages, System.SysUtils, System.Variants, System.Classes, Vcl.Graphics,
  Vcl.Controls, Vcl.Forms, Vcl.Dialogs, GR32_Image, DWMApi, GR32_Layers,
  Vcl.StdCtrls, Vcl.ExtCtrls, Vcl.Imaging.pngimage, Registry;

type
  TForm1 = class(TForm)
    Button1: TButton;
    Image1: TImage;
    Image3: TImage;
    Image321: TImage32;
    procedure FormCreate(Sender: TObject);
    procedure FormMouseDown(Sender: TObject; Button: TMouseButton;
      Shift: TShiftState; X, Y: Integer);
    procedure Image1MouseDown(Sender: TObject; Button: TMouseButton;
      Shift: TShiftState; X, Y: Integer);
    procedure Button1Click(Sender: TObject);
  private
    { Private declarations }
    function TaskbarAccented:boolean;
    function TaskbarTranslucent:boolean;
    procedure EnableBlur;
    function GetAccentColor:TColor;
    function BlendColors(Col1, Col2: TColor; A: Byte): TColor;
    procedure WndProc(var Message: TMessage);override;
    procedure UpdateColorization;
  public
    { Public declarations }
  end;

  AccentPolicy = packed record
    AccentState: Integer;
    AccentFlags: Integer;
    GradientColor: Integer;
    AnimationId: Integer;
  end;

  TWinCompAttrData = packed record
    attribute: THandle;
    pData: Pointer;
    dataSize: ULONG;
  end;


var
  Form1: TForm1;

var
  SetWindowCompositionAttribute: function (Wnd: HWND; const AttrData: TWinCompAttrData): BOOL; stdcall = Nil;

implementation

{$R *.dfm}

    procedure SetAlphaColorPicture(
      const Col: TColor;
      const Alpha: Integer;
      Picture: TPicture;
      const _width: Integer;
      const _height: Integer
      );
    var
      png: TPngImage;
      x,y: integer;
      sl: pByteArray;
    begin

      png := TPngImage.CreateBlank(COLOR_RGBALPHA, 8, _width, _height);
      try

        png.Canvas.Brush.Color := Col;
        png.Canvas.FillRect(Rect(0,0,_width,_height));
        for y := 0 to png.Height - 1 do
        begin
          sl := png.AlphaScanline[y];
          FillChar(sl^, png.Width, Alpha);
        end;

        Picture.Assign(png);

      finally
        png.Free;
      end;
    end;

procedure TForm1.Button1Click(Sender: TObject);
begin
  Close;
end;

procedure TForm1.EnableBlur;
const
  WCA_ACCENT_POLICY = 19;
  ACCENT_ENABLE_BLURBEHIND = 3;
  DrawLeftBorder = $20;
  DrawTopBorder = $40;
  DrawRightBorder = $80;
  DrawBottomBorder = $100;
var
  dwm10: THandle;
  data : TWinCompAttrData;
  accent: AccentPolicy;
begin

      dwm10 := LoadLibrary('user32.dll');
      try
        @SetWindowCompositionAttribute := GetProcAddress(dwm10, 'SetWindowCompositionAttribute');
        if @SetWindowCompositionAttribute <> nil then
        begin
          accent.AccentState := ACCENT_ENABLE_BLURBEHIND ;
          accent.AccentFlags := DrawLeftBorder or DrawTopBorder or DrawRightBorder or DrawBottomBorder;

          data.Attribute := WCA_ACCENT_POLICY;
          data.dataSize := SizeOf(accent);
          data.pData := @accent;
          SetWindowCompositionAttribute(Handle, data);
        end
        else
        begin
          ShowMessage('Not found Windows 10 blur API');
        end;
      finally
        FreeLibrary(dwm10);
      end;

end;

procedure TForm1.FormCreate(Sender: TObject);
var
  BlendFunc: TBlendFunction;
  bmp: TBitmap;
begin
  DoubleBuffered := True;
  Color := clBlack;
  BorderStyle := bsNone;
  if TaskbarTranslucent then
    EnableBlur;

  UpdateColorization;
  (*BlendFunc.BlendOp := AC_SRC_OVER;
  BlendFunc.BlendFlags := 0;
  BlendFunc.SourceConstantAlpha := 96;
  BlendFunc.AlphaFormat := AC_SRC_ALPHA;
  bmp := TBitmap.Create;
  try
    bmp.SetSize(Width, Height);
    bmp.Canvas.Brush.Color := clRed;
    bmp.Canvas.FillRect(Rect(0,0,Width,Height));
    Winapi.Windows.AlphaBlend(Canvas.Handle, 50,50,Width, Height,
      bmp.Canvas.Handle, 0, 0, bmp.Width, bmp.Height, BlendFunc);
  finally
    bmp.Free;
  end;*)
end;

procedure TForm1.FormMouseDown(Sender: TObject; Button: TMouseButton;
  Shift: TShiftState; X, Y: Integer);
begin
  ReleaseCapture;
  Perform(WM_SYSCOMMAND, $F012, 0);
end;

procedure TForm1.Image1MouseDown(Sender: TObject; Button: TMouseButton;
  Shift: TShiftState; X, Y: Integer);
begin

  ReleaseCapture;
  Perform(WM_SYSCOMMAND, $F012, 0);
end;


function TForm1.TaskbarAccented: boolean;
var
  reg: TRegistry;
begin
  Result := False;
  reg := TRegistry.Create;
  try
    reg.RootKey := HKEY_CURRENT_USER;
    reg.OpenKeyReadOnly('SOFTWAREMicrosoftWindowsCurrentVersionThemesPersonalize');
    try
      if reg.ReadInteger('ColorPrevalence') = 1 then
      Result := True;
    except
      Result := False;
    end;
    reg.CloseKey;

  finally
    reg.Free;
  end;
end;

function TForm1.TaskbarTranslucent: boolean;
var
  reg: TRegistry;
begin
  Result := False;
  reg := TRegistry.Create;
  try
    reg.RootKey := HKEY_CURRENT_USER;
    reg.OpenKeyReadOnly('SOFTWAREMicrosoftWindowsCurrentVersionThemesPersonalize');
    try
      if reg.ReadInteger('EnableTransparency') = 1 then
      Result := True;
    except
      Result := False;
    end;
    reg.CloseKey;

  finally
    reg.Free;
  end;
end;

procedure TForm1.UpdateColorization;
begin
  if TaskbarTranslucent then
  begin
    if TaskbarAccented then
      SetAlphaColorPicture(BlendColors(GetAccentColor, clBlack, 50) , 222, Image1.Picture, 10, 10)
    else
      SetAlphaColorPicture(clblack, 222, Image1.Picture, 10,10  );
    Image1.Align := alClient;
    Image1.Stretch := True;
    Image1.Visible := True;
  end
  else
    Image1.Visible := False;

end;

function TForm1.GetAccentColor:TColor;
var
  col: cardinal;
  opaque: longbool;
  newcolor: TColor;
  a,r,g,b: byte;
begin
  DwmGetColorizationColor(col, opaque);
  a := Byte(col shr 24);
  r := Byte(col shr 16);
  g := Byte(col shr 8);
  b := Byte(col);


  newcolor := RGB(
      round(r*(a/255)+255-a),
      round(g*(a/255)+255-a),
      round(b*(a/255)+255-a)
  );

  Result := newcolor;


end;

//Credits to Roy M Klever http://rmklever.com/?p=116
function TForm1.BlendColors(Col1, Col2: TColor; A: Byte): TColor;
var
  c1,c2: LongInt;
  r,g,b,v1,v2: byte;
begin
  A := Round(2.55 * A);
  c1 := ColorToRGB(Col1);
  c2 := ColorToRGB(Col2);
  v1 := Byte(c1);
  v2 := Byte(c2);
  r := A * (v1 - v2) shr 8 + v2;
  v1 := Byte(c1 shr 8);
  v2 := Byte(c2 shr 8);
  g := A * (v1 - v2)