rtsp - How to force client to switch RTP transport from UDP to TCP?

Question

If the client wants to watch a stream that is on my RTSP server, it first tries to setup a stream through the UDP protocol. How can I tell it that my server only supports RTP/AVP/TCP and that it should switch transports?

I want to terminate the UDP support on my server, but all the clients first try to SETUP the session over UDP, and later they do so over TCP... and I want to switch them to TCP as soon as possible in RTSP protocol.

How can I do that?

Answer 1

As far as I know, there is no control at server side for transport type preference. Server should be made generic it should support RTP over UDP, RTP over TCP, RTP over RTSP and RTP over RTSP over HTTP(S). And its clients choice which transport to choose. Transport field is first sent in SETUP request

1) UDP

 C->A: SETUP rtsp://audio.example.com/twister/audio.en RTSP/1.0
               CSeq: 1
               Transport: RTP/AVP/UDP;unicast;client_port=3056-3057

2) TCP

    C->A: SETUP rtsp://audio.example.com/twister/audio.en RTSP/1.0
               CSeq: 1
               Transport: RTP/AVP/TCP;unicast;client_port=3056-3057

3) RTP over RTSP and RTP over RTSP over HTTP(S)

S->C: RTSP/1.0 200 OK
           CSeq: 2
           Date: 05 Jun 1997 18:57:18 GMT
           Transport: RTP/AVP/TCP;interleaved=0-1

As we can see "Transport type" request is sent by client side.

If you want to support TCP only server you can send "400 Bad Request" or "461 Unsupported transport" in response to SETUP request as suggested by you or another way is to send 200 OK but do not transmit any RTP packets. Client will timeout and get to know that it is behind proxy and it will send SETUP request again with RTP/AVP/TCP parameter (Not an ideal case).