为SWFUpload增加ASP版本的上传处理程序

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› ASP.NET›ASP.NET编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

但也许是随着asp的逐渐淡出web开发，官方仅提供了.net、php等版本的上传处理程序，对于asp开发者来说则需要自行处理服务器端的数据接收。

刚接触此组件时就被它功能强大与灵活方便吸引，由于当时项目采用asp开发，百度一番后发现并无好用的asp上传处理程序（现在有很多啦^^），看来只能自己研究开发啦，最初采用处理普通上传的方法来截取文件的数据，几经测试发现并不能有效接收组件传递过来的文件数据，无奈只能着手分析下它发送的数据形式，通过分析发现它发送的数据格式还是和普通上传存在一些区别的，无论是图片还是文件都是以octet-stream形式发送到服务器的，了解了数据格式，剩下的就是截取啦，下面把我的处理方法分享给需要的朋友，处理速度还算理想。

复制代码代码如下:

 
<% 
Class SWFUpload 

Private formData, folderPath, streamGet 
Private fileSize, chunkSize, bofCont, eofCont 

REM CLASS-INITIALIZE 

Private Sub Class_Initialize 
Call InitVariant 
Server.ScriptTimeOut = 1800 
Set streamGet = Server.CreateObject("ADODB.Stream") 

sAuthor = "51JS.COM-ZMM" 
sVersion = "Upload Class 1.0" 
End Sub 

REM CLASS-INITIALIZE 

Public Property Let SaveFolder(byVal sFolder) 
If Right(sFolder, 1) = "/" Then 
folderPath = sFolder 
Else 
folderPath = sFolder & "/" 
End If 
End Property 

Public Property Get SaveFolder 
SaveFolder = folderPath 
End Property 

Private Function InitVariant 
chunkSize = 1024 * 128 

folderPath = "/" : fileSize = 1024 * 10 
bofCont = StrToByte("octet-stream" & vbCrlf & vbCrlf) 
eofCont = StrToByte(vbCrlf & String(12, "-")) 
End Function 

Public Function GetUploadData 
Dim curRead : curRead = 0 
Dim dataLen : dataLen = Request.TotalBytes 

streamGet.Type = 1 : streamGet.Open 
Do While curRead < dataLen 
Dim partLen : partLen = chunkSize 
If partLen + curRead > dataLen Then partLen = dataLen - curRead 
streamGet.Write Request.BinaryRead(partLen) 
curRead = curRead + partLen 
Loop 
streamGet.Position = 0 
formData = streamGet.Read(dataLen) 

Call GetUploadFile 
End Function 

Public Function GetUploadFile 
Dim begMark : begMark = StrToByte("filename=") 
Dim begPath : begPath = InStrB(1, formData, begMark & ChrB(34)) + 10 
Dim endPath : endPath = InStrB(begPath, formData, ChrB(34)) 
Dim cntPath : cntPath = MidB(formData, begPath, endPath - begPath) 
Dim cntName : cntName = folderPath & GetClientName(cntPath) 

Dim begFile : begFile = InStrB(1, formData, bofCont) + 15 
Dim endFile : endFile = InStrB(begFile, formData, eofCont) 

Call SaveUploadFile(cntName, begFile, endFile - begFile) 
End Function 

Public Function SaveUploadFile(byVal fName, byVal bCont, byVal sLen) 
Dim filePath : filePath = Server.MapPath(fName) 
If CreateFolder("|", GetParentFolder(filePath)) Then 
streamGet.Position = bCont 
Set streamPut = Server.CreateObject("ADODB.Stream") 
streamPut.Type = 1 : streamPut.Mode = 3 : streamPut.Open 
streamPut.Write streamGet.Read(sLen) 
streamPut.SaveToFile filePath, 2 
streamPut.Close : Set streamPut = Nothing 
End If 
End Function 

Private Function IsNothing(byVal sVar) 
IsNothing = IsNull(sVar) Or (sVar = Empty) 
End Function 

Private Function StrToByte(byVal sText) 
For i = 1 To Len(sText) 
StrToByte = StrToByte & ChrB(Asc(Mid(sText, i, 1))) 
Next 
End Function 

Private Function ByteToStr(byVal sByte) 
Dim streamTmp 
Set streamTmp = Server.CreateObject("ADODB.Stream") 
streamTmp.Type = 2 
streamTmp.Mode = 3 
streamTmp.Open 
streamTmp.WriteText sByte 
streamTmp.Position = 0 
streamTmp.CharSet = "utf-8" 
streamTmp.Position = 2 
ByteToStr = streamTmp.ReadText 
streamTmp.Close 
Set streamTmp = Nothing 
End Function 

Private Function GetClientName(byVal bInfo) 
Dim sInfo, regEx 
sInfo = ByteToStr(bInfo) 
If IsNothing(sInfo) Then 
GetClientName = "" 
Else 
Set regEx = New RegExp 
regEx.Pattern = "^.*\\([^\\]+)$" 
regEx.Global = False 
regEx.IgnoreCase = True 
GetClientName = regEx.Replace(sInfo, "$1") 
Set regEx = Nothing 
End If 
End Function 

Private Function GetParentFolder(byVal sPath) 
Dim regEx 
Set regEx = New RegExp 
regEx.Pattern = "^(.*)\\[^\\]*$" 
regEx.Global = True 
regEx.IgnoreCase = True 
GetParentFolder = regEx.Replace(sPath, "$1") 
Set regEx = Nothing 
End Function 

Private Function CreateFolder(byVal sLine, byVal sPath) 
Dim oFso 
Set oFso = Server.CreateObject("Scripting.FileSystemObject") 
If Not oFso.FolderExists(sPath) Then 
Dim regEx 
Set regEx = New RegExp 
regEx.Pattern = "^(.*)\\([^\\]*)$" 
regEx.Global = False 
regEx.IgnoreCase = True 
sLine = sLine & regEx.Replace(sPath, "$2") & "|" 
sPath = regEx.Replace(sPath, "$1") 
If CreateFolder(sLine, sPath) Then CreateFolder = True 
Set regEx = Nothing 
Else 
If sLine = "|" Then 
CreateFolder = True 
Else 
Dim sTemp : sTemp = Mid(sLine, 2, Len(sLine) - 2) 
If InStrRev(sTemp, "|") = 0 Then 
sLine = "|" 
sPath = sPath & "\" & sTemp 
Else 
Dim Folder : Folder = Mid(sTemp, InStrRev(sTemp, "|") + 1) 
sLine = "|" & Mid(sTemp, 1, InStrRev(sTemp, "|") - 1) & "|" 
sPath = sPath & "\" & Folder 
End If 
oFso.CreateFolder sPath 
If CreateFolder(sLine, sPath) Then CreateFolder = True 
End if 
End If 
Set oFso = Nothing 
End Function 

REM CLASS-TERMINATE 

Private Sub Class_Terminate 
streamGet.Close 
Set streamGet = Nothing 
End Sub 

End Class 

REM 调用方法 
Dim oUpload 
Set oUpload = New SWFUpload 
oUpload.SaveFolder = "存放路径" 
oUpload.GetUploadData 
Set oUpload = Nothing 
%> 