<dependency>   <groupId>com.github.mpusher</groupId>   <artifactId>mpush-boot</artifactId>   <version>0.0.2</version></dependency>

#################################################################################################################### NOTICE：## 系统配置文件，所有列出的项是系统所支持全部配置项# 如果要覆盖某项的值可以添加到mpush.conf中。## 配置文件格式采用HOCON格式。解析库由https://github.com/typesafehub/config提供。# 具体可参照说明文档，比如含有特殊字符的字符串必须用双引号包起来。###################################################################################################################mp { #基础配置 home=${user.dir} //程序工作目录 #日志配置 log-level=warn log-dir=${mp.home}/logs log-conf-path=${mp.home}/conf/logback.xml #核心配置 core {     max-packet-size=10k //系统允许传输的最大包的大小     compress-threshold=10k //数据包启用压缩的临界值，超过该值后对数据进行压缩     min-heartbeat=3m //最小心跳间隔     max-heartbeat=3m //最大心跳间隔     max-hb-timeout-times=2 //允许的心跳连续超时的最大次数     session-expired-time=1d //用于快速重连的session 过期时间默认1天     epoll-provider=netty //nio:jdk自带，netty:由netty实现 } #安全配置 security {     #rsa 私钥、公钥key长度为1024;可以使用脚本bin/rsa.sh生成, @see com.mpush.tools.crypto.RSAUtils#main     private-key="MIIBNgIBADANBgkqhkiG9w0BAQEFAASCASAwggEcAgEAAoGBAKCE8JYKhsbydMPbiO7BJVq1pbuJWJHFxOR7L8Hv3ZVkSG4eNC8DdwAmDHYu/wadfw0ihKFm2gKDcLHp5yz5UQ8PZ8FyDYvgkrvGV0ak4nc40QDJWws621dm01e/INlGKOIStAAsxOityCLv0zm5Vf3+My/YaBvZcB5mGUsPbx8fAgEAAoGAAy0+WanRqwRHXUzt89OsupPXuNNqBlCEqgTqGAt4Nimq6Ur9u2R1KXKXUotxjp71Ubw6JbuUWvJg+5Rmd9RjT0HOUEQF3rvzEepKtaraPhV5ejEIrB+nJWNfGye4yzLdfEXJBGUQzrG+wNe13izfRNXI4dN/6Q5npzqaqv0E1CkCAQACAQACAQACAQACAQA="     public-key="MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCghPCWCobG8nTD24juwSVataW7iViRxcTkey/B792VZEhuHjQvA3cAJgx2Lv8GnX8NIoShZtoCg3Cx6ecs+VEPD2fBcg2L4JK7xldGpOJ3ONEAyVsLOttXZtNXvyDZRijiErQALMTorcgi79M5uVX9/jMv2Ggb2XAeZhlLD28fHwIDAQAB"     aes-key-length=16 //AES key 长度 } #网络配置 net {     local-ip=""  //本地ip, 默认取第一个网卡的本地IP     public-ip="" //外网ip, 默认取第一个网卡的外网IP     connect-server-bind-ip=""  //connSrv 绑定的本地ip (默认anyLocalAddress 0.0.0.0 or ::0)     connect-server-register-ip=${mp.net.public-ip}  //公网ip, 注册到zk中的ip, 默认是public-ip     connect-server-port=3000 //长链接服务对外端口, 公网端口     connect-server-register-attr { //注册到zk里的额外属性，比如配置权重，可在alloc里排序         weight:1     }     gateway-server-bind-ip=""  //gatewaySrv 绑定的本地ip (默认anyLocalAddress 0.0.0.0 or ::0)     gateway-server-register-ip=${mp.net.local-ip}  //本地ip, 注册到zk中的ip, 默认是local-ip     gateway-server-port=3001 //网关服务端口, 内部端口     gateway-server-net=tcp //网关服务使用的网络类型tcp/udp/sctp/udt     gateway-client-port=4000 //UDP 客户端端口     gateway-server-multicast="239.239.239.88" //239.0.0.0～239.255.255.255为本地管理组播地址，仅在特定的本地范围内有效     gateway-client-multicast="239.239.239.99" //239.0.0.0～239.255.255.255为本地管理组播地址，仅在特定的本地范围内有效     gateway-client-num=1 //网关客户端连接数     admin-server-port=3002 //控制台服务端口, 内部端口     ws-server-port=0 //websocket对外端口, 公网端口, 0表示禁用websocket     ws-path="/" //websocket path     public-host-mapping { //本机局域网IP和公网IP的映射关系, 该配置后续会被废弃         //"10.0.10.156":"111.1.32.137"         //"10.0.10.166":"111.1.33.138"     }     snd_buf { //tcp/udp 发送缓冲区大小         connect-server=32k         gateway-server=0         gateway-client=0 //0表示使用操作系统默认值     }     rcv_buf { //tcp/udp 接收缓冲区大小         connect-server=32k         gateway-server=0         gateway-client=0 //0表示使用操作系统默认值     }     write-buffer-water-mark { //netty 写保护         connect-server-low=32k         connect-server-high=64k         gateway-server-low=10m         gateway-server-high=20m     }     traffic-shaping { //流量整形配置         gateway-client {             enabled:false             check-interval:100ms             write-global-limit:30k             read-global-limit:0             write-channel-limit:3k             read-channel-limit:0         }         gateway-server {             enabled:false             check-interval:100ms             write-global-limit:0             read-global-limit:30k             write-channel-limit:0             read-channel-limit:3k         }         connect-server {             enabled:false             check-interval:100ms             write-global-limit:0             read-global-limit:100k             write-channel-limit:3k             read-channel-limit:3k         }     } } #Zookeeper配置 zk {     server-address="127.0.0.1:2181" //多台机器使用","分隔如："10.0.10.44:2181,10.0.10.49:2181" @see org.apache.zookeeper.ZooKeeper#ZooKeeper()     namespace=mpush     digest=mpush //zkCli.sh acl 命令 addauth digest mpush     watch-path=/     retry {         #initial amount of time to wait between retries         baseSleepTimeMs=3s         #max number of times to retry         maxRetries=3         #max time in ms to sleep on each retry         maxSleepMs=5s     }     connectionTimeoutMs=5s     sessionTimeoutMs=5s } #Redis集群配置 redis {     cluster-model=single //single,cluster,sentinel     sentinel-master:""     nodes:[] s//["127.0.0.1:6379"]格式ip:port     password="" //your password     config {         maxTotal:8,         maxIdle:4,         minIdle:1,         lifo:true,         fairness:false,         maxWaitMillis:5000,         minEvictableIdleTimeMillis:300000,         softMinEvictableIdleTimeMillis:1800000,         numTestsPerEvictionRun:3,         testOnCreate:false,         testOnBorrow:false,         testOnReturn:false,         testWhileIdle:false,         timeBetweenEvictionRunsMillis:60000,         blockWhenExhausted:true,         jmxEnabled:false,         jmxNamePrefix:pool,         jmxNameBase:pool     } } #HTTP代理配置 http {     proxy-enabled=false //启用Http代理     max-conn-per-host=5 //每个域名的最大链接数, 建议web服务nginx超时时间设长一点, 以便保持长链接     default-read-timeout=10s //请求超时时间     max-content-length=5m //response body 最大大小     dns-mapping { //域名映射外网地址转内部IP, 域名部分不包含端口号         //"mpush.com":["127.0.0.1:8080", "127.0.0.1:8081"]     } } #线程池配置 thread {     pool {         conn-work:0 //接入服务线程池大小，0表示线程数根据cpu核数动态调整(2*cpu)         gateway-server-work:0 //网关服务线程池大小，0表示线程数根据cpu核数动态调整(2*cpu)         http-work:0 //http proxy netty client work pool size，0表示线程数根据cpu核数动态调整(2*cpu)         ack-timer:1 //处理ACK消息超时         push-task:0 //消息推送中心，推送任务线程池大小, 如果为0表示使用Gateway Server的work线程池，tcp下推荐0         gateway-client-work:0 //网关客户端线程池大小，0表示线程数根据cpu核数动态调整(2*cpu)，该线程池在客户端运行         push-client:2 //消息推送回调处理，该线程池在客户端运行         event-bus { //用户处理内部事件分发             min:1             max:16             queue-size:10000 //大量的online，offline         }         mq { //用户上下线消息, 踢人等             min:1             max:4             queue-size:10000         }     } } #推送消息流控 push {    flow-control { //qps = limit/(duration)         global:{ //针对非广播推送的流控，全局有效             limit:5000 //qps = 5000             max:0 //UN limit             duration:1s //1s         }         broadcast:{ //针对广播消息的流控，单次任务有效             limit:3000 //qps = 3000             max:100000 //10w             duration:1s //1s         }    } } #系统监控配置 monitor {     dump-dir=${mp.home}/tmp     dump-stack=false //是否定时dump堆栈     dump-period=1m  //多久监控一次     print-log=true //是否打印监控日志     profile-enabled=false //开启性能监控     profile-slowly-duration=10ms //耗时超过10ms打印日志 } #SPI扩展配置 spi {     thread-pool-factory:"com.mpush.tools.thread.pool.DefaultThreadPoolFactory"     dns-mapping-manager:"com.mpush.common.net.HttpProxyDnsMappingManager" }}