Java DigitalOutput类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Java›Java编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Java中ioio.lib.api.DigitalOutput类的典型用法代码示例。如果您正苦于以下问题：Java DigitalOutput类的具体用法？Java DigitalOutput怎么用？Java DigitalOutput使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

DigitalOutput类属于ioio.lib.api包，在下文中一共展示了DigitalOutput类的17个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Java代码示例。

示例1: openDigitalOutput

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
synchronized public DigitalOutput openDigitalOutput(
		DigitalOutput.Spec spec, boolean startValue)
		throws ConnectionLostException {
	checkState();
	hardware_.checkValidPin(spec.pin);
	checkPinFree(spec.pin);
	DigitalOutputImpl result = new DigitalOutputImpl(this, spec.pin, startValue);
	addDisconnectListener(result);
	openPins_[spec.pin] = true;
	try {
		protocol_.setPinDigitalOut(spec.pin, startValue, spec.mode);
	} catch (IOException e) {
		result.close();
		throw new ConnectionLostException(e);
	}
	return result;
}

开发者ID:jrieke，项目名称:ioiometer，代码行数:19，代码来源:IOIOImpl.java

示例2: openDigitalOutput

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
synchronized public DigitalOutput openDigitalOutput(
        DigitalOutput.Spec spec, boolean startValue)
        throws ConnectionLostException {
    checkState();
    Resource pin = new Resource(ResourceType.PIN, spec.pin);
    resourceManager_.alloc(pin);

    DigitalOutputImpl result = new DigitalOutputImpl(this, pin, startValue);
    addDisconnectListener(result);
    try {
        protocol_.setPinDigitalOut(spec.pin, startValue, spec.mode);
    } catch (IOException e) {
        result.close();
        throw new ConnectionLostException(e);
    }
    return result;
}

开发者ID:flyver，项目名称:Flyver-Apps，代码行数:19，代码来源:IOIOImpl.java

示例3: openDigitalOutput

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
synchronized public DigitalOutput openDigitalOutput(
		DigitalOutput.Spec spec, boolean startValue)
		throws ConnectionLostException {
	checkState();
	PinFunctionMap.checkValidPin(spec.pin);
	checkPinFree(spec.pin);
	DigitalOutputImpl result = new DigitalOutputImpl(this, spec.pin, startValue);
	addDisconnectListener(result);
	openPins_[spec.pin] = true;
	try {
		protocol_.setPinDigitalOut(spec.pin, startValue, spec.mode);
	} catch (IOException e) {
		result.close();
		throw new ConnectionLostException(e);
	}
	return result;
}

开发者ID:smartebikes，项目名称:SmartEbikesMonitorSystem，代码行数:19，代码来源:IOIOImpl.java

示例4: createIOIOLooper

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
protected IOIOLooper createIOIOLooper() {
	return new BaseIOIOLooper() {
		private DigitalOutput led_;

		@Override
		protected void setup() throws ConnectionLostException,
				InterruptedException {
			led_ = ioio_.openDigitalOutput(IOIO.LED_PIN);
		}

		@Override
		public void loop() throws ConnectionLostException,
				InterruptedException {
			led_.write(false);
			Thread.sleep(500);
			led_.write(true);
			Thread.sleep(500);
		}
	};
}

开发者ID:PinkHatSpike，项目名称:pioio，代码行数:22，代码来源:HelloIOIOService.java

示例5: createIOIOLooper

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
public IOIOLooper createIOIOLooper(String connectionType, Object extra) {
	return new BaseIOIOLooper() {
		private DigitalOutput led_;

		@Override
		protected void setup() throws ConnectionLostException,
				InterruptedException {
			led_ = ioio_.openDigitalOutput(IOIO.LED_PIN, true);
		}

		@Override
		public void loop() throws ConnectionLostException,
				InterruptedException {
			led_.write(!ledOn_);
			Thread.sleep(10);
		}
	};
}

开发者ID:PinkHatSpike，项目名称:pioio，代码行数:20，代码来源:HelloIOIOConsole.java

示例6: openDigitalOutput

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
synchronized public DigitalOutput openDigitalOutput(
		DigitalOutput.Spec spec, boolean startValue)
		throws ConnectionLostException {
	checkState();
	Resource pin = new Resource(ResourceType.PIN, spec.pin);
	resourceManager_.alloc(pin);

	DigitalOutputImpl result = new DigitalOutputImpl(this, pin, startValue);
	addDisconnectListener(result);
	try {
		protocol_.setPinDigitalOut(spec.pin, startValue, spec.mode);
	} catch (IOException e) {
		result.close();
		throw new ConnectionLostException(e);
	}
	return result;
}

开发者ID:edarn，项目名称:kryp-client，代码行数:19，代码来源:IOIOImpl.java

示例7: setPinDigitalOut

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
synchronized public void setPinDigitalOut(int pin, boolean value,
		DigitalOutput.Spec.Mode mode) throws IOException {
	beginBatch();
	writeByte(SET_PIN_DIGITAL_OUT);
	writeByte((pin << 2)
			| (mode == DigitalOutput.Spec.Mode.OPEN_DRAIN ? 0x01 : 0x00)
			| (value ? 0x02 : 0x00));
	endBatch();
}

开发者ID:jrieke，项目名称:ioiometer，代码行数:10，代码来源:IOIOProtocol.java

示例8: openPwmOutput

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
synchronized public PwmOutput openPwmOutput(DigitalOutput.Spec spec,
		int freqHz) throws ConnectionLostException {
	checkState();
	hardware_.checkSupportsPeripheralOutput(spec.pin);
	checkPinFree(spec.pin);
	int pwmNum = pwmAllocator_.allocateModule();

	int scale = 0;
	float baseUs;
	int period;
	while (true) {
		final int clk = 16000000 / IOIOProtocol.PwmScale.values()[scale].scale;
		period = clk / freqHz;
		if (period <= 65536) {
			baseUs = 1000000.0f / clk;
			break;
		}
		if (++scale >= PwmScale.values().length) {
			throw new IllegalArgumentException("Frequency too low: "
					+ freqHz);
		}
	}

	PwmImpl pwm = new PwmImpl(this, spec.pin, pwmNum, period, baseUs);
	addDisconnectListener(pwm);
	openPins_[spec.pin] = true;
	try {
		protocol_.setPinDigitalOut(spec.pin, false, spec.mode);
		protocol_.setPinPwm(spec.pin, pwmNum, true);
		protocol_.setPwmPeriod(pwmNum, period - 1,
				IOIOProtocol.PwmScale.values()[scale]);
	} catch (IOException e) {
		pwm.close();
		throw new ConnectionLostException(e);
	}
	return pwm;
}

开发者ID:jrieke，项目名称:ioiometer，代码行数:39，代码来源:IOIOImpl.java

示例9: openUart

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
public Uart openUart(int rx, int tx, int baud, Uart.Parity parity,
		Uart.StopBits stopbits) throws ConnectionLostException {
	return openUart(rx == INVALID_PIN ? null : new DigitalInput.Spec(rx),
			tx == INVALID_PIN ? null : new DigitalOutput.Spec(tx), baud,
			parity, stopbits);
}

开发者ID:jrieke，项目名称:ioiometer，代码行数:8，代码来源:IOIOImpl.java

示例10: openSpiMaster

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
public SpiMaster openSpiMaster(int miso, int mosi, int clk,
		int[] slaveSelect, SpiMaster.Rate rate)
		throws ConnectionLostException {
	DigitalOutput.Spec[] slaveSpecs = new DigitalOutput.Spec[slaveSelect.length];
	for (int i = 0; i < slaveSelect.length; ++i) {
		slaveSpecs[i] = new DigitalOutput.Spec(slaveSelect[i]);
	}
	return openSpiMaster(new DigitalInput.Spec(miso, Mode.PULL_UP),
			new DigitalOutput.Spec(mosi), new DigitalOutput.Spec(clk),
			slaveSpecs, new SpiMaster.Config(rate));
}

开发者ID:jrieke，项目名称:ioiometer，代码行数:13，代码来源:IOIOImpl.java

示例11: setPinDigitalOut

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
synchronized public void setPinDigitalOut(int pin, boolean value, DigitalOutput.Spec.Mode mode)
        throws IOException {
    beginBatch();
    writeByte(SET_PIN_DIGITAL_OUT);
    writeByte((pin << 2) | (mode == DigitalOutput.Spec.Mode.OPEN_DRAIN ? 0x01 : 0x00)
            | (value ? 0x02 : 0x00));
    endBatch();
}

开发者ID:flyver，项目名称:Flyver-Apps，代码行数:9，代码来源:IOIOProtocol.java

示例12: openUart

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
public Uart openUart(int rx, int tx, int baud, Uart.Parity parity,
                     Uart.StopBits stopbits) throws ConnectionLostException {
    return openUart(rx == INVALID_PIN ? null : new DigitalInput.Spec(rx),
            tx == INVALID_PIN ? null : new DigitalOutput.Spec(tx), baud,
            parity, stopbits);
}

开发者ID:flyver，项目名称:Flyver-Apps，代码行数:8，代码来源:IOIOImpl.java

示例13: openSpiMaster

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
public SpiMaster openSpiMaster(int miso, int mosi, int clk,
                               int[] slaveSelect, SpiMaster.Rate rate)
        throws ConnectionLostException {
    DigitalOutput.Spec[] slaveSpecs = new DigitalOutput.Spec[slaveSelect.length];
    for (int i = 0; i < slaveSelect.length; ++i) {
        slaveSpecs[i] = new DigitalOutput.Spec(slaveSelect[i]);
    }
    return openSpiMaster(new DigitalInput.Spec(miso, Mode.PULL_UP),
            new DigitalOutput.Spec(mosi), new DigitalOutput.Spec(clk),
            slaveSpecs, new SpiMaster.Config(rate));
}

开发者ID:flyver，项目名称:Flyver-Apps，代码行数:13，代码来源:IOIOImpl.java

示例14: ChannelOutCompare

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
protected ChannelOutCompare(DigitalOutput.Spec[] specs) {
    specs_ = specs;
    oc_ = new Resource(ResourceType.OUTCOMPARE);
    ocs_.add(oc_);
    for (DigitalOutput.Spec spec : specs) {
        ioio_.hardware_.checkSupportsPeripheralOutput(spec.pin);
        pins_.add(new Resource(ResourceType.PIN, spec.pin));
    }
}

开发者ID:flyver，项目名称:Flyver-Apps，代码行数:10，代码来源:SequencerImpl.java

示例15: openPins

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
public final void openPins() throws ConnectionLostException {
    try {
        for (DigitalOutput.Spec spec : specs_) {
            ioio_.protocol_.setPinDigitalOut(spec.pin, false, spec.mode);
            ioio_.protocol_.setPinPwm(spec.pin, oc_.id, true);
        }
    } catch (IOException e) {
        throw new ConnectionLostException(e);
    }
}

开发者ID:flyver，项目名称:Flyver-Apps，代码行数:12，代码来源:SequencerImpl.java

示例16: openPwmOutput

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
@Override
synchronized public PwmOutput openPwmOutput(DigitalOutput.Spec spec,
		int freqHz) throws ConnectionLostException {
	checkState();
	PinFunctionMap.checkSupportsPeripheralOutput(spec.pin);
	checkPinFree(spec.pin);
	int pwmNum = pwmAllocator_.allocateModule();

	int scale = 0;
	float baseUs;
	int period;
	while (true) {
		final int clk = 16000000 / IOIOProtocol.PwmScale.values()[scale].scale;
		period = clk / freqHz;
		if (period <= 65536) {
			baseUs = 1000000.0f / clk;
			break;
		}
		if (++scale >= PwmScale.values().length) {
			throw new IllegalArgumentException("Frequency too low: "
					+ freqHz);
		}
	}

	PwmImpl pwm = new PwmImpl(this, spec.pin, pwmNum, period, baseUs);
	addDisconnectListener(pwm);
	openPins_[spec.pin] = true;
	try {
		protocol_.setPinDigitalOut(spec.pin, false, spec.mode);
		protocol_.setPinPwm(spec.pin, pwmNum, true);
		protocol_.setPwmPeriod(pwmNum, period - 1,
				IOIOProtocol.PwmScale.values()[scale]);
	} catch (IOException e) {
		pwm.close();
		throw new ConnectionLostException(e);
	}
	return pwm;
}

开发者ID:smartebikes，项目名称:SmartEbikesMonitorSystem，代码行数:39，代码来源:IOIOImpl.java

示例17: setPinDigitalOut

import ioio.lib.api.DigitalOutput; //导入依赖的package包/类
synchronized public void setPinDigitalOut(int pin, boolean value, DigitalOutput.Spec.Mode mode)
		throws IOException {
	beginBatch();
	writeByte(SET_PIN_DIGITAL_OUT);
	writeByte((pin << 2) | (mode == DigitalOutput.Spec.Mode.OPEN_DRAIN ? 0x01 : 0x00)
			| (value ? 0x02 : 0x00));
	endBatch();
}

开发者ID:edarn，项目名称:kryp-client，代码行数:9，代码来源:IOIOProtocol.java

注：本文中的ioio.lib.api.DigitalOutput类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。