Java OnOffType类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Java›Java编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Java中org.eclipse.smarthome.core.library.types.OnOffType类的典型用法代码示例。如果您正苦于以下问题：Java OnOffType类的具体用法？Java OnOffType怎么用？Java OnOffType使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

OnOffType类属于org.eclipse.smarthome.core.library.types包，在下文中一共展示了OnOffType类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Java代码示例。

示例1: initGlobals

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
private void initGlobals() {
	kSession.setGlobal("logger", droolsLogger);
	kSession.setGlobal("ON", OnOffType.ON);
	kSession.setGlobal("OFF", OnOffType.OFF);
	kSession.setGlobal("OPEN", OpenClosedType.OPEN);
	kSession.setGlobal("CLOSED", OpenClosedType.CLOSED);
	kSession.setGlobal("ZERO", PercentType.ZERO);
	kSession.setGlobal("HUNDRED", PercentType.HUNDRED);
	kSession.setGlobal("INCREASE", IncreaseDecreaseType.INCREASE);
	kSession.setGlobal("DECREASE", IncreaseDecreaseType.DECREASE);

	if (eventPublisher != null) {
		kSession.setGlobal("openhab", eventPublisher);
	}
	logger.debug("Initialized global variables");
}

开发者ID:IncQueryLabs，项目名称:smarthome-cep-demonstrator，代码行数:17，代码来源:DroolsEventBusClient.java

示例2: handleCommand

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public void handleCommand(ChannelUID channelUID, Command command) {
    if (channelUID.getId().equals(ALLOW_PIR_SWITCH)) {
        // TODO: handle command

        // Note: if communication with thing fails for some reason,
        // indicate that by setting the status with detail information
        // updateStatus(ThingStatus.OFFLINE, ThingStatusDetail.COMMUNICATION_ERROR,
        // "Could not control device at IP address x.x.x.x");
    } else if (channelUID.getId().equals(PIR_SWITCH)) {
        if ((OnOffType) command == OnOffType.ON) {
            triggerChannel(getThing().getChannel(EVENT_CHANNEL_ID_MOTION).getUID(), EVENT_MOTION_START);
            triggerChannel(getThing().getChannel(EVENT_CHANNEL_ID_MOTION_START).getUID(), EVENT_MOTION_START);
        } else if ((OnOffType) command == OnOffType.OFF) {
            triggerChannel(getThing().getChannel(EVENT_CHANNEL_ID_MOTION).getUID(), EVENT_MOTION_STOP);
            triggerChannel(getThing().getChannel(EVENT_CHANNEL_ID_MOTION_STOP).getUID(), EVENT_MOTION_STOP);
        }
    } else if (channelUID.getId().equals(MQTT_SWITCH)) {

    } else if (channelUID.getId().equals(MOTION)) {

    }
}

开发者ID:IncQueryLabs，项目名称:smarthome-cep-demonstrator，代码行数:24，代码来源:SimpleMotionSensorHandler.java

示例3: run

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public void run() {
    bridgeHandlerdisposalOngoing = false;

    heos.startEventListener();
    heos.startHeartBeat(heartBeatPulse);
    logger.info("HEOS System heart beat startet. Pulse time is {}s", heartBeatPulse);
    updateState(CH_ID_DYNGROUPSHAND, OnOffType.ON); // activates dynamic group handling by default

    if (thing.getConfiguration().containsKey(USER_NAME) && thing.getConfiguration().containsKey(PASSWORD)) {
        logger.info("Logging in to HEOS account.");
        String name = thing.getConfiguration().get(USER_NAME).toString();
        String password = thing.getConfiguration().get(PASSWORD).toString();
        api.logIn(name, password);

    } else {
        logger.error("Can not log in. Username and Password not set");
    }
}

开发者ID:Wire82，项目名称:org.openhab.binding.heos，代码行数:20，代码来源:HeosBridgeHandler.java

示例4: handleCommand

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public void handleCommand(final Command command) {
    int level = 0;
    if (command instanceof PercentType) {
        level = ((PercentType) command).intValue();
    } else if (command instanceof OnOffType) {
        OnOffType cmdOnOff = (OnOffType) command;
        if (cmdOnOff == OnOffType.ON) {
            level = 100;
        } else {
            level = 0;
        }
    }

    clusterLevelControl.moveToLevelWithOnOffCommand((int) (level * 254.0 / 100.0 + 0.5),
            configLevelControl.getDefaultTransitionTime());
}

开发者ID:openhab，项目名称:org.openhab.binding.zigbee，代码行数:18，代码来源:ZigBeeConverterSwitchLevel.java

示例5: fetchSystemConfig

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
private void fetchSystemConfig() throws FreeboxException {
	SystemConfiguration systemConfiguration = fbClient.getSystemManager().getConfiguration();
	
	updateState(new ChannelUID(getThing().getUID(), FWVERSION),
			new StringType(systemConfiguration.getFirmware_version()));					
	
	long newUptime = systemConfiguration.getUptimeVal();
	updateState(new ChannelUID(getThing().getUID(), RESTARTED), 
			newUptime < uptime ? OnOffType.ON : OnOffType.OFF );
	uptime = newUptime;

	updateState(new ChannelUID(getThing().getUID(), UPTIME), 
			new DecimalType(uptime));
	updateState(new ChannelUID(getThing().getUID(), TEMPCPUM), 
			new DecimalType(systemConfiguration.getTemp_cpum()));
	updateState(new ChannelUID(getThing().getUID(), TEMPCPUB), 
			new DecimalType(systemConfiguration.getTemp_cpub()));
	updateState(new ChannelUID(getThing().getUID(), TEMPSWITCH), 
			new DecimalType(systemConfiguration.getTemp_sw()));
	updateState(new ChannelUID(getThing().getUID(), FANSPEED), 
			new DecimalType(systemConfiguration.getFan_rpm()));
}

开发者ID:Neulinet，项目名称:Zoo，代码行数:23，代码来源:FreeboxHandler.java

示例6: setForced

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
private void setForced(Command command) throws FreeboxException {
	if (command != null) {
		if (command instanceof OnOffType
				|| command instanceof OpenClosedType
				|| command instanceof UpDownType) {

			LCDConfig lcd = fbClient.getLCDManager().getLCDConfig();
			
			lcd.setOrientationForced( 
					command.equals(OnOffType.ON) || 
					command.equals(UpDownType.UP) || 
					command.equals(OpenClosedType.OPEN)
					);
			fbClient.getLCDManager().setLCDConfig(lcd);	
			fetchLCDConfig();	
		}
	}		
}

开发者ID:Neulinet，项目名称:Zoo，代码行数:19，代码来源:FreeboxHandler.java

示例7: setWifiStatus

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
private void setWifiStatus(Command command) throws FreeboxException {
	if (command != null) {
		if (command instanceof OnOffType
				|| command instanceof OpenClosedType
				|| command instanceof UpDownType) {

			WifiGlobalConfig wifiConfiguration = fbClient.getWifiManager().getGlobalConfig();
			
			wifiConfiguration.setEnabled( 
					command.equals(OnOffType.ON) || 
					command.equals(UpDownType.UP) || 
					command.equals(OpenClosedType.OPEN)
					);
			
			fbClient.getWifiManager().setGlobalConfig(wifiConfiguration);
			fetchWifiConfig();	
		}
	}	
}

开发者ID:Neulinet，项目名称:Zoo，代码行数:20，代码来源:FreeboxHandler.java

示例8: handleCommand

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public void handleCommand(ChannelUID channelUID, Command command) {
       if (command instanceof RefreshType) {
           switch (channelUID.getId()) {
           case CHANNEL_ONLINE:
           	try {
				State state = networkService.updateDeviceState() ? OnOffType.ON : OnOffType.OFF;
				updateState(CHANNEL_ONLINE, state);					
			} catch( InvalidConfigurationException invalidConfigurationException) {
				getThing().setStatus(ThingStatus.OFFLINE);
			}
           	break;
           default:
               logger.debug("Command received for an unknown channel: {}", channelUID.getId());
               break;
           }
       } else {
           logger.debug("Command {} is not supported for channel: {}", command, channelUID.getId());
       }	
}

开发者ID:Neulinet，项目名称:Zoo，代码行数:21，代码来源:NetworkHandler.java

示例9: convertCommandToBooleanValue

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
/**
 * Convert openHAB command to boolean.
 * 
 * @param command
 * @return
 */
public static boolean convertCommandToBooleanValue(Command command) {

    if (command instanceof OnOffType || command instanceof OpenClosedType || command instanceof UpDownType) {

        boolean newValue;

        if (command.equals(OnOffType.ON) || command.equals(UpDownType.UP) || command.equals(OpenClosedType.OPEN)) {
            newValue = true;
        } else if (command.equals(OnOffType.OFF) || command.equals(UpDownType.DOWN)
                || command.equals(OpenClosedType.CLOSED)) {
            newValue = false;
        } else {
            throw new NumberFormatException("Command '" + command + "' not supported");
        }

        return newValue;

    } else {
        throw new NumberFormatException("Command '" + command + "' not supported for channel");
    }
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:28，代码来源:DataConverters.java

示例10: handleCommand

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public void handleCommand(ChannelUID channelUID, Command command) {
    if ((getThing().getStatus() == ThingStatus.OFFLINE)
            && ((getThing().getStatusInfo().getStatusDetail() == ThingStatusDetail.BRIDGE_OFFLINE)
                    || (getThing().getStatusInfo().getStatusDetail() == ThingStatusDetail.CONFIGURATION_ERROR))) {
        return;
    }
    try {
        if (command == null || command instanceof RefreshType) {
            return;
        } else if (command instanceof StringType && PLAYURL.equals(channelUID.getId())) {
            playMedia(command.toString());
        } else if (command instanceof OnOffType && STOP.equals(channelUID.getId())) {
            stopMedia();
        } else {
            logger.debug("Thing {}: unexpected command {} from channel {}", getThing().getUID(), command,
                    channelUID.getId());
        }
    } catch (FreeboxException e) {
        logger.debug("Thing {}: error while handling command {} from channel {}", getThing().getUID(), command,
                channelUID.getId(), e);
        updateStatus(ThingStatus.OFFLINE, ThingStatusDetail.COMMUNICATION_ERROR);
    }
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:25，代码来源:FreeboxThingHandler.java

示例11: parseReport

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
void parseReport(JsonObject data) {
    boolean hasMotion = data.has(STATUS) && MOTION.equals(data.get(STATUS).getAsString());

    if (data.has(LUX)) {
        int illu = data.get(LUX).getAsInt();
        updateState(CHANNEL_ILLUMINATION, new DecimalType(illu));
    }

    synchronized (this) {
        if (hasMotion) {
            updateState(CHANNEL_MOTION, OnOffType.ON);
            updateState(CHANNEL_LAST_MOTION, new DateTimeType());
            startTimer();
        }
    }
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:18，代码来源:XiaomiSensorMotionHandler.java

示例12: onDeviceStateChanged

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public void onDeviceStateChanged(ThingUID bridge, AbstractAudioDeviceConfig device) {
    if (device.getPaName().equals(name)) {
        updateStatus(ThingStatus.ONLINE);
        logger.debug("Updating states of {} id: {}", device, PulseaudioBindingConstants.VOLUME_CHANNEL);
        updateState(PulseaudioBindingConstants.VOLUME_CHANNEL, new PercentType(device.getVolume()));
        updateState(PulseaudioBindingConstants.MUTE_CHANNEL, device.isMuted() ? OnOffType.ON : OnOffType.OFF);
        updateState(PulseaudioBindingConstants.STATE_CHANNEL,
                device.getState() != null ? new StringType(device.getState().toString()) : new StringType("-"));
        if (device instanceof SinkInput) {
            updateState(PulseaudioBindingConstants.ROUTE_TO_SINK_CHANNEL,
                    ((SinkInput) device).getSink() != null
                            ? new StringType(((SinkInput) device).getSink().getPaName())
                            : new StringType("-"));
        }
        if (device instanceof Sink && ((Sink) device).isCombinedSink()) {
            updateState(PulseaudioBindingConstants.SLAVES_CHANNEL,
                    new StringType(StringUtils.join(((Sink) device).getCombinedSinkNames(), ",")));
        }
    }
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:22，代码来源:PulseaudioHandler.java

示例13: handleCommand

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public void handleCommand(ChannelUID channelUID, Command command) {
    try {
        if (channelUID.getId().equals("run")) {
            if (command == OnOffType.ON) {
                getBridgeHandler().sendCommand("unpause " + myId());
            } else if (command == OnOffType.OFF) {
                getBridgeHandler().sendCommand("pause " + myId());
            }
        } else if (channelUID.getId().equals("finish")) {
            if (command == OnOffType.ON) {
                getBridgeHandler().sendCommand("finish " + myId());
            } else if (command == OnOffType.OFF) {
                getBridgeHandler().sendCommand("unpause " + myId());
            }
        }
        getBridgeHandler().refresh();
        getBridgeHandler().delayedRefresh();
    } catch (IOException e) {
        logger.debug("Input/output error while handing command to Folding slot", e);
    }
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:23，代码来源:SlotHandler.java

示例14: handleCommand

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public void handleCommand(final ChannelUID channelUID, final Command command) {
    if (channelUID.getId().equals(WIFI_SOCKET_CHANNEL_ID)) {
        logger.debug("Silvercrest socket command received: {}", command);

        if (command == OnOffType.ON) {
            this.sendCommand(SilvercrestWifiSocketRequestType.ON);

        } else if (command == OnOffType.OFF) {
            this.sendCommand(SilvercrestWifiSocketRequestType.OFF);

        } else if (command == RefreshType.REFRESH) {
            this.sendCommand(SilvercrestWifiSocketRequestType.GPIO_STATUS);
        }
    }
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:17，代码来源:SilvercrestWifiSocketHandler.java

示例15: parseSuccessfulReply

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public void parseSuccessfulReply() {
    if (deviceReply == null) {
        return;
    }

    // decode response of form state,1:3,0
    Pattern p = Pattern.compile("state,\\d:\\d,[01]");
    Matcher m = p.matcher(deviceReply);
    if (!m.matches()) {
        logger.warn("Successful reply from device can't be matched: {}", deviceReply);
        state = OnOffType.OFF;
        return;
    }

    setModule(deviceReply.substring(6, 7));
    setConnector(deviceReply.substring(8, 9));
    setState((deviceReply.charAt(10) == '0' ? OnOffType.OFF : OnOffType.ON));
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:20，代码来源:CommandGetstate.java

示例16: updateDevice

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
private void updateDevice(DeviceConfig info) {
    if (info == null) {
        return;
    }

    if (info.getIsConnected() != null) {
        if (info.getIsConnected() != 0) {
            if (!ThingStatus.ONLINE.equals(getThing().getStatus())) {
                updateStatus(ThingStatus.ONLINE);
            }
        } else {
            if (!ThingStatus.OFFLINE.equals(getThing().getStatus())) {
                updateStatus(ThingStatus.OFFLINE);
            }
        }
    }

    if (info.getCurrentState() != null) {
        updateChannel(CHANNEL_SWITCH_BINARY, info.getCurrentState() == 0 ? OnOffType.OFF : OnOffType.ON);
    }
    if (info.getCurrentUsage() != null) {
        BigDecimal d = new BigDecimal(info.getCurrentUsage()).setScale(1, BigDecimal.ROUND_HALF_UP);
        updateChannel(CHANNEL_POWER_CONSUMPTION, new DecimalType(d));
    }

}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:27，代码来源:ToonPlugHandler.java

示例17: handleLightPower

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
private void handleLightPower(Command command) {
    if (!isLightPresent()) {
        logger.debug("Fan does not have light installed for command {}", command);
        return;
    }

    logger.debug("Handling light power command {}", command);
    // <mac;LIGHT;PWR;ON|OFF>
    if (command instanceof OnOffType) {
        if (command.equals(OnOffType.OFF)) {
            sendCommand(macAddress, ";LIGHT;PWR;OFF");
        } else if (command.equals(OnOffType.ON)) {
            sendCommand(macAddress, ";LIGHT;PWR;ON");
        }
    }
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:17，代码来源:BigAssFanHandler.java

示例18: handleLightSmarter

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
private void handleLightSmarter(Command command) {
    if (!isLightPresent()) {
        logger.debug("Fan does not have light installed for command {}", command);
        return;
    }

    logger.debug("Handling light smartmode command {}", command);
    // <mac;LIGHT;SMART;ON/OFF>
    if (command instanceof OnOffType) {
        if (command.equals(OnOffType.OFF)) {
            sendCommand(macAddress, ";LIGHT;SMART;OFF");
        } else if (command.equals(OnOffType.ON)) {
            sendCommand(macAddress, ";LIGHT;SMART;ON");
        }
    }
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:17，代码来源:BigAssFanHandler.java

示例19: handlePercentage

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
/**
 * Handle percentType commands. Action depends on what channel send the command. For brightness related channels
 * after the brightness command an extra onOff command is send to update the onOff state conform the brightness
 * state.
 *
 * @param channelUID Channel the command is for
 * @param command The percentType command
 * @throws IOException Connection to the bulb failed
 */
private void handlePercentage(ChannelUID channelUID, PercentType command) throws IOException {
    String id = channelUID.getId();

    switch (id) {
        case CHANNEL_COLOR:
            handleBrightness(command);
            handleOnOff((OnOffType) command.as(OnOffType.class));
            break;
        case CHANNEL_COLOR_TEMPERATURE:
            handleColorTemperature(command);
            handleOnOff(OnOffType.ON);
            break;
        case CHANNEL_PROGRAM_SPEED:
            handleProgramSpeed(command);
            handleOnOff(OnOffType.ON);
            break;
    }
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:28，代码来源:FeicanHandler.java

示例20: sendPowerCommand

import org.eclipse.smarthome.core.library.types.OnOffType; //导入依赖的package包/类
@Override
public boolean sendPowerCommand(Command command, int zone) throws CommandTypeNotSupportedException {
    AvrCommand commandToSend = null;

    if (command == OnOffType.ON) {
        commandToSend = RequestResponseFactory.getIpControlCommand(SimpleCommandType.POWER_ON, zone);
        // Send the first Power ON command.
        sendCommand(commandToSend);

        // According to the Pioneer Specs, the first request only wakeup the
        // AVR CPU, the second one Power ON the AVR. Still according to the Pioneer Specs, the second
        // request has to be delayed of 100 ms.
        try {
            TimeUnit.MILLISECONDS.sleep(100);
        } catch (InterruptedException ex) {
            Thread.currentThread().interrupt();
        }

    } else if (command == OnOffType.OFF) {
        commandToSend = RequestResponseFactory.getIpControlCommand(SimpleCommandType.POWER_OFF, zone);
    } else {
        throw new CommandTypeNotSupportedException("Command type not supported.");
    }

    return sendCommand(commandToSend);
}

开发者ID:openhab，项目名称:openhab2-addons，代码行数:27，代码来源:StreamAvrConnection.java

注：本文中的org.eclipse.smarthome.core.library.types.OnOffType类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Java SSTableScanner类代码示例发布时间：2022-05-22

Java TitleBuffer类代码示例发布时间：2022-05-22

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19233|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9998|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9667|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8631|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8666|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

客服电话

电子邮件

Java OnOffType类代码示例

示例1: initGlobals

示例2: handleCommand

示例3: run

示例4: handleCommand

示例5: fetchSystemConfig

示例6: setForced

示例7: setWifiStatus

示例8: handleCommand

示例9: convertCommandToBooleanValue

示例10: handleCommand

示例11: parseReport

示例12: onDeviceStateChanged

示例13: handleCommand

示例14: handleCommand

示例15: parseSuccessfulReply

示例16: updateDevice

示例17: handleLightPower

示例18: handleLightSmarter

示例19: handlePercentage

示例20: sendPowerCommand

请发表评论

全部评论

上一篇：

下一篇：

chasinginfinity/ml-from-scratch: Machine

mkyong/spring3-mvc-maven-annotation-hell

床的笔顺,关于床的笔画,体会床的部首

CVE-2022-35648

zendesk/android-floating-action-button:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053