Java AtCommandResponse类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Java›Java编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Java中com.rapplogic.xbee.api.AtCommandResponse类的典型用法代码示例。如果您正苦于以下问题：Java AtCommandResponse类的具体用法？Java AtCommandResponse怎么用？Java AtCommandResponse使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

AtCommandResponse类属于com.rapplogic.xbee.api包，在下文中一共展示了AtCommandResponse类的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Java代码示例。

示例1: ZNetApiAtExample

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
public ZNetApiAtExample() throws XBeeException {
		try {
			
			// replace with port and baud rate of your XBee
			xbee.open("COM6", 9600);	
			
			// get the 8 byte SH/SL address
			log.debug("SH is " + ByteUtils.toBase16(((AtCommandResponse)xbee.sendAtCommand(new AtCommand("SH"))).getValue()));
			log.debug("SL is " + ByteUtils.toBase16(((AtCommandResponse)xbee.sendAtCommand(new AtCommand("SL"))).getValue()));
			
			// uncomment to run
//			this.configureIOSamples(xbee);
//			this.associationStatus(xbee);
//			this.nodeDiscover(xbee);
//			this.configureCoordinator(xbee);
//			this.configureEndDevice(xbee);
		} finally {
			if (xbee != null && xbee.isConnected()) {
				xbee.close();		
			}
		}
	}

开发者ID:andrewrapp，项目名称:xbee-api，代码行数:23，代码来源:ZNetApiAtExample.java

示例2: ZNetApiAtExample

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
public ZNetApiAtExample() throws XBeeException {
		try {
			
			// replace with port and baud rate of your XBee
			xbee.open("COM6", 9600);	
			
			// get the 8 byte SH/SL address
			log.debug("SH is " + ByteUtils.toBase16(((AtCommandResponse)xbee.sendAtCommand(new AtCommand("SH"))).getValue()));
			log.debug("SL is " + ByteUtils.toBase16(((AtCommandResponse)xbee.sendAtCommand(new AtCommand("SL"))).getValue()));
			
			// uncomment to run
//			this.configureIOSamples(xbee);
//			this.associationStatus(xbee);
//			this.nodeDiscover(xbee);
//			this.configureCoordinator(xbee);
//			this.configureEndDevice(xbee);
		} finally {
			xbee.close();
		}
	}

开发者ID:allanlang，项目名称:xbee-api-jssc，代码行数:21，代码来源:ZNetApiAtExample.java

示例3: processResponse

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
public void processResponse(XBeeResponse response)
{
    if (response.getApiId() == ApiId.AT_RESPONSE)
    {
        NodeDiscover nd = NodeDiscover.parse((AtCommandResponse)response);
        XBeeAddress64 addr = nd.getNodeAddress64();

        if(!nodeAddresses.contains(addr))
        {
            nodeAddresses.add(addr);
            log.debug(nd);
        }

        if(!currentNodeAddresses.contains(addr))
            currentNodeAddresses.add(addr);

        for(int i = 0; i < pruningIndex; i++)
        {
            if(unresponsiveNodes.get(i).contains(addr))
                unresponsiveNodes.get(i).remove(addr);
        }

    }
}

开发者ID:utdrobotchess，项目名称:chess-game，代码行数:25，代码来源:BotFinder.java

示例4: ZBNodeDiscoverExample

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
public ZBNodeDiscoverExample() throws XBeeException, InterruptedException {
	
	try {
		// replace with your serial port
		xbee.open("/dev/tty.usbserial-A6005v5M", 9600);
		
		
		// get the Node discovery timeout
		xbee.sendAsynchronous(new AtCommand("NT"));
		AtCommandResponse nodeTimeout = (AtCommandResponse) xbee.getResponse();
		
		// default is 6 seconds
		int nodeDiscoveryTimeout = ByteUtils.convertMultiByteToInt(nodeTimeout.getValue()) * 100;			
		log.info("Node discovery timeout is " + nodeDiscoveryTimeout + " milliseconds");
					
		log.info("Sending Node Discover command");
		xbee.sendAsynchronous(new AtCommand("ND"));

		// NOTE: increase NT if you are not seeing all your nodes reported
		
		List<? extends XBeeResponse> responses = xbee.collectResponses(nodeDiscoveryTimeout);
		
		log.info("Time is up!  You should have heard back from all nodes by now.  If not make sure all nodes are associated and/or try increasing the node timeout (NT)");
		
		for (XBeeResponse response : responses) {
			if (response instanceof AtCommandResponse) {
				AtCommandResponse atResponse = (AtCommandResponse) response;
				
				if (atResponse.getCommand().equals("ND") && atResponse.getValue() != null && atResponse.getValue().length > 0) {
					ZBNodeDiscover nd = ZBNodeDiscover.parse((AtCommandResponse)response);
					log.info("Node Discover is " + nd);							
				}
			}
		}
	} finally {
		if (xbee != null && xbee.isConnected()) {
			xbee.close();		
		}
	}
}

开发者ID:andrewrapp，项目名称:xbee-api，代码行数:41，代码来源:ZBNodeDiscoverExample.java

示例5: parseIsSample

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
public static ZNetRxIoSampleResponse parseIsSample(AtCommandResponse response) throws IOException {
	
	if (!response.getCommand().equals("IS")) {
		throw new RuntimeException("This is only applicable to the \"IS\" AT command");
	}
	
	IntArrayInputStream in = new IntArrayInputStream(response.getValue());
	ZNetRxIoSampleResponse sample = new ZNetRxIoSampleResponse();
	sample.parseIoSample(in);
	
	return sample;
}

开发者ID:andrewrapp，项目名称:xbee-api，代码行数:13，代码来源:ZNetRxIoSampleResponse.java

示例6: ZBNodeDiscoverExample

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
public ZBNodeDiscoverExample() throws XBeeException, InterruptedException {
	
	try {
		// replace with your serial port
		xbee.open("/dev/tty.usbserial-A6005v5M", 9600);
		
		
		// get the Node discovery timeout
		xbee.sendAsynchronous(new AtCommand("NT"));
		AtCommandResponse nodeTimeout = (AtCommandResponse) xbee.getResponse();
		
		// default is 6 seconds
		int nodeDiscoveryTimeout = ByteUtils.convertMultiByteToInt(nodeTimeout.getValue()) * 100;			
		log.info("Node discovery timeout is " + nodeDiscoveryTimeout + " milliseconds");
					
		log.info("Sending Node Discover command");
		xbee.sendAsynchronous(new AtCommand("ND"));

		// NOTE: increase NT if you are not seeing all your nodes reported
		
		List<? extends XBeeResponse> responses = xbee.collectResponses(nodeDiscoveryTimeout);
		
		log.info("Time is up!  You should have heard back from all nodes by now.  If not make sure all nodes are associated and/or try increasing the node timeout (NT)");
		
		for (XBeeResponse response : responses) {
			if (response instanceof AtCommandResponse) {
				AtCommandResponse atResponse = (AtCommandResponse) response;
				
				if (atResponse.getCommand().equals("ND") && atResponse.getValue() != null && atResponse.getValue().length > 0) {
					ZBNodeDiscover nd = ZBNodeDiscover.parse((AtCommandResponse)response);
					log.info("Node Discover is " + nd);							
				}
			}
		}
	} finally {
		xbee.close();
	}
}

开发者ID:allanlang，项目名称:xbee-api-jssc，代码行数:39，代码来源:ZBNodeDiscoverExample.java

示例7: processResponse

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
public void processResponse(XBeeResponse response)
{
    if (response.getApiId() == ApiId.AT_RESPONSE)
    {
        NodeDiscover nd = NodeDiscover.parse((AtCommandResponse)response);
        XBeeAddress64 addr = nd.getNodeAddress64();
        log.debug("Found Address: " + addr);
        chessbots.add(addr);
    }
}

开发者ID:utdrobotchess，项目名称:chess-game，代码行数:11，代码来源:ChessbotCommunicator.java

示例8: associationStatus

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
private void associationStatus(XBee xbee) throws XBeeException {
	// get association status - success indicates it is associated to another XBee
	AtCommandResponse response = (AtCommandResponse) xbee.sendAtCommand(new AtCommand("AI"));
	log.debug("Association Status is " + AssociationStatus.get(response));		
}

开发者ID:andrewrapp，项目名称:xbee-api，代码行数:6，代码来源:ZNetApiAtExample.java

示例9: ZNetReceiverExample

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
private ZNetReceiverExample() throws Exception {
	XBee xbee = new XBee();		

	try {			
		// replace with the com port of your receiving XBee (typically your end device)
		// router
		xbee.open("/dev/tty.usbserial-A6005uPi", 9600);
		
		while (true) {

			try {
				// we wait here until a packet is received.
				XBeeResponse response = xbee.getResponse();
				
				log.info("received response " + response.toString());
				
				if (response.getApiId() == ApiId.ZNET_RX_RESPONSE) {
					// we received a packet from ZNetSenderTest.java
					ZNetRxResponse rx = (ZNetRxResponse) response;
					
					log.info("Received RX packet, option is " + rx.getOption() + ", sender 64 address is " + ByteUtils.toBase16(rx.getRemoteAddress64().getAddress()) + ", remote 16-bit address is " + ByteUtils.toBase16(rx.getRemoteAddress16().getAddress()) + ", data is " + ByteUtils.toBase16(rx.getData()));

					// optionally we may want to get the signal strength (RSSI) of the last hop.
					// keep in mind if you have routers in your network, this will be the signal of the last hop.
					AtCommand at = new AtCommand("DB");
					xbee.sendAsynchronous(at);
					XBeeResponse atResponse = xbee.getResponse();
					
					if (atResponse.getApiId() == ApiId.AT_RESPONSE) {
						// remember rssi is a negative db value
						log.info("RSSI of last response is " + -((AtCommandResponse)atResponse).getValue()[0]);
					} else {
						// we didn't get an AT response
						log.info("expected RSSI, but received " + atResponse.toString());
					}
				} else {
					log.debug("received unexpected packet " + response.toString());
				}
			} catch (Exception e) {
				log.error(e);
			}
		}
	} finally {
		if (xbee != null && xbee.isConnected()) {
			xbee.close();		
		}
	}
}

开发者ID:andrewrapp，项目名称:xbee-api，代码行数:49，代码来源:ZNetReceiverExample.java

示例10: ZNetReceiverExample

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
private ZNetReceiverExample() throws Exception {
	XBee xbee = new XBee();		

	try {			
		// replace with the com port of your receiving XBee (typically your end device)
		// router
		xbee.open("/dev/tty.usbserial-A6005uPi", 9600);
		
		while (true) {

			try {
				// we wait here until a packet is received.
				XBeeResponse response = xbee.getResponse();
				
				log.info("received response " + response.toString());
				
				if (response.getApiId() == ApiId.ZNET_RX_RESPONSE) {
					// we received a packet from ZNetSenderTest.java
					ZNetRxResponse rx = (ZNetRxResponse) response;
					
					log.info("Received RX packet, option is " + rx.getOption() + ", sender 64 address is " + ByteUtils.toBase16(rx.getRemoteAddress64().getAddress()) + ", remote 16-bit address is " + ByteUtils.toBase16(rx.getRemoteAddress16().getAddress()) + ", data is " + ByteUtils.toBase16(rx.getData()));

					// optionally we may want to get the signal strength (RSSI) of the last hop.
					// keep in mind if you have routers in your network, this will be the signal of the last hop.
					AtCommand at = new AtCommand("DB");
					xbee.sendAsynchronous(at);
					XBeeResponse atResponse = xbee.getResponse();
					
					if (atResponse.getApiId() == ApiId.AT_RESPONSE) {
						// remember rssi is a negative db value
						log.info("RSSI of last response is " + -((AtCommandResponse)atResponse).getValue()[0]);
					} else {
						// we didn't get an AT response
						log.info("expected RSSI, but received " + atResponse.toString());
					}
				} else {
					log.debug("received unexpected packet " + response.toString());
				}
			} catch (Exception e) {
				log.error(e);
			}
		}
	} finally {
		if (xbee.isConnected()) {
			xbee.close();
		}
	}
}

开发者ID:allanlang，项目名称:xbee-api-jssc，代码行数:49，代码来源:ZNetReceiverExample.java

示例11: parse

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
public static ZBNodeDiscover parse(AtCommandResponse response) {
	
	if (!response.getCommand().equals("ND")) {
		throw new RuntimeException("This method is only applicable for the ND command");
	}
	
	int[] data = response.getValue();
	
	IntArrayInputStream in = new IntArrayInputStream(data);
	
	ZBNodeDiscover nd = new ZBNodeDiscover();
	
	nd.setNodeAddress16(new XBeeAddress16(in.read(2)));
	
	nd.setNodeAddress64(new XBeeAddress64(in.read(8)));

	StringBuffer ni = new StringBuffer();
	
	int ch;
	
	// NI is terminated with 0
	while ((ch = in.read()) != 0) {
		if (ch < 32 || ch > 126) {
			throw new RuntimeException("Node Identifier " + ch + " is non-ascii");
		}
		
		ni.append((char)ch);	
	}
	
	nd.setNodeIdentifier(ni.toString());
			
	nd.setParent(new XBeeAddress16(in.read(2)));
	nd.setDeviceType(DeviceType.get(in.read()));
	// TODO this is being reported as 1 (router) for my end device
	nd.setStatus(in.read());
	nd.setProfileId(in.read(2));
	nd.setMfgId(in.read(2));
	
	return nd;
}

开发者ID:andrewrapp，项目名称:xbee-api，代码行数:41，代码来源:ZBNodeDiscover.java

示例12: parse

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
public static WpanNodeDiscover parse(AtCommandResponse response) {
	
	if (!response.getCommand().equals("ND")) {
		throw new IllegalArgumentException("This method is only applicable for the ND command");
	}
	
	int[] data = response.getValue();
	
	if (data == null || data.length == 0) {
		throw new IllegalArgumentException("ND command has no value");
	}
	
	IntArrayInputStream in = new IntArrayInputStream(data);
	
	WpanNodeDiscover nd = new WpanNodeDiscover();
	
	nd.setNodeAddress16(new XBeeAddress16(in.read(2)));
	
	nd.setNodeAddress64(new XBeeAddress64(in.read(8)));
	
	nd.setRssi(-1*in.read());

	StringBuilder ni = new StringBuilder();
	
	int ch;
	
	// NI is terminated with 0
	while ((ch = in.read()) != 0) {
		if (ch < 32 || ch > 126) {
			throw new RuntimeException("Node Identifier " + ch + " is non-ascii");
		}
		
		ni.append((char)ch);	
	}
	
	nd.setNodeIdentifier(ni.toString());
	
	return nd;
}

开发者ID:andrewrapp，项目名称:xbee-api，代码行数:40，代码来源:WpanNodeDiscover.java

示例13: setState

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
@Override
public void setState(boolean state) throws IOException {

    NDC.push("write(" + address + ")");
    Marker m = new Marker("write(" + address + ")");
    
    try {
        
        XBeeAddress64 xbeeAddress = Parser.parse(address.hardwareAddress);
        String channel = address.channel;
        
        int deviceState = state ? 5 : 4;
        RemoteAtRequest request = new RemoteAtRequest(xbeeAddress, channel, new int[] {deviceState});
        AtCommandResponse rsp = (AtCommandResponse) container.sendSynchronous(request, XBeeConstants.TIMEOUT_AT_MILLIS);

        logger.info(channel + " response: " + rsp);

        if (rsp.isError()) {
            
            throw new IOException(channel + " + query failed, status: " + rsp.getStatus());
        }

    } catch (Throwable t) {

        IOException secondary = new IOException("Unable to write " + address);

        secondary.initCause(t);

        throw secondary;

    } finally {

        m.close();
        NDC.pop();
    }
}

开发者ID:home-climate-control，项目名称:dz，代码行数:37，代码来源:XBeeSwitch.java

示例14: getSignal

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
@Override
public DataSample<Double> getSignal() {
    
    NDC.push("getSignal(" + address + ")");
    Marker m = new Marker("getSignal(" + address + ")");

    try {
        
        XBeeAddress64 xbeeAddress = Parser.parse(address.hardwareAddress);
        String channel = address.channel;
        
        RemoteAtRequest request = new RemoteAtRequest(xbeeAddress, "IS");
        AtCommandResponse rsp = (AtCommandResponse) container.sendSynchronous(request, XBeeConstants.TIMEOUT_IS_MILLIS);

        logger.debug(channel + " response: " + rsp);

        if (rsp.isError()) {
            
            throw new IOException(channel + " + query failed, status: " + rsp.getStatus());
        }
        
        IoSample sample = new IoSample(rsp.getValue(), xbeeAddress, logger);
        
        logger.debug("sample: " + sample);
        
        return new DataSample<Double>(System.currentTimeMillis(), sourceName, signature, sample.getChannel(channel), null);
        
    } catch (Throwable t) {

        IOException secondary = new IOException("Unable to read " + address);

        secondary.initCause(t);

        throw new IllegalStateException("Not Implemented", t);

    } finally {

        m.close();
        NDC.pop();
    }
}

开发者ID:home-climate-control，项目名称:dz，代码行数:42，代码来源:XBeeSensor.java

示例15: processResponse

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
@Override
public void processResponse(XBeeResponse packet) {
    
    NDC.push("processResponse");
    
    try {
        
        logger.debug("packet: " + packet);
        
        ApiId apiId = packet.getApiId();
        
        switch (apiId) {
        
        case AT_RESPONSE:
            
            AtCommandResponse atCommandResponse = (AtCommandResponse) packet;
            String command = atCommandResponse.getCommand();
            
            if ("ND".equals(command)) {
            
                createPrototype(ZBNodeDiscover.parse(atCommandResponse));
                
            } else if ("NT".equals(command)) {
                
                // No big deal, browse() initiated it and handled it
                
            } else {
                
                logger.warn("Unexpected response received (command: " + command + ")");
            }
            
            break;
            
        case ZNET_IO_SAMPLE_RESPONSE:
            
            broadcastIoSample((ZNetRxIoSampleResponse) packet);
            break;
        
        default:
            
            // Have no idea what this is, don't care
            break;
        }

    } catch (Throwable t) {
        
        logger.error("Oops", t);
    } finally {
        NDC.pop();
    }
    
}

开发者ID:home-climate-control，项目名称:dz，代码行数:53，代码来源:XBeeDeviceFactory.java

示例16: getState

import com.rapplogic.xbee.api.AtCommandResponse; //导入依赖的package包/类
@Override
public boolean getState() throws IOException {

    NDC.push("read(" + address + ")");
    Marker m = new Marker("read(" + address + ")");

    try {
        
        XBeeAddress64 xbeeAddress = Parser.parse(address.hardwareAddress);
        String channel = address.channel;
        
        RemoteAtRequest request = new RemoteAtRequest(xbeeAddress, channel);
        AtCommandResponse rsp = (AtCommandResponse) container.sendSynchronous(request, XBeeConstants.TIMEOUT_AT_MILLIS);

        logger.info(channel + " response: " + rsp);

        if (rsp.isError()) {
            
            throw new IOException(channel + " + query failed, status: " + rsp.getStatus());
        }
        
        int buffer[] = rsp.getValue();
        
        if (buffer.length != 1) {
            
            throw new IOException("Unexpected buffer size " + buffer.length);
        }
        
        switch (buffer[0]) {
        case 4:
            
            return false;
            
        case 5:
            
            return true;
            
        default:
            
            throw new IOException(channel + " is not configured as switch, state is " + buffer[0]);
        }

    } catch (Throwable t) {

        IOException secondary = new IOException("Unable to read " + address);

        secondary.initCause(t);

        throw secondary;

    } finally {

        m.close();
        NDC.pop();
    }
}

开发者ID:home-climate-control，项目名称:dz，代码行数:57，代码来源:XBeeSwitch.java

注：本文中的com.rapplogic.xbee.api.AtCommandResponse类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Java Mutable类代码示例发布时间：2022-05-22

Java KeyLookup类代码示例发布时间：2022-05-22

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19167|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

Java AtCommandResponse类代码示例

示例1: ZNetApiAtExample

示例2: ZNetApiAtExample

示例3: processResponse

示例4: ZBNodeDiscoverExample

示例5: parseIsSample

示例6: ZBNodeDiscoverExample

示例7: processResponse

示例8: associationStatus

示例9: ZNetReceiverExample

示例10: ZNetReceiverExample

示例11: parse

示例12: parse

示例13: setState

示例14: getSignal

示例15: processResponse

示例16: getState

请发表评论

全部评论

上一篇：

下一篇：

mpvue+vant+flyio小程序项目总结

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

CVE-2022-35285

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053