本文整理汇总了Java中org.firstinspires.ftc.robotcore.external.Func类的典型用法代码示例。如果您正苦于以下问题：Java Func类的具体用法？Java Func怎么用？Java Func使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
Func类属于org.firstinspires.ftc.robotcore.external包，在下文中一共展示了Func类的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Java代码示例。
示例1: testNonAutoClear
import org.firstinspires.ftc.robotcore.external.Func; //导入依赖的package包/类
void testNonAutoClear() throws InterruptedException
{
((TelemetryInternal)telemetry).resetTelemetryForOpMode();
telemetry.setAutoClear(false);
Telemetry.Item counting = telemetry.addData("counting", 1).setRetained(true);
telemetry.addData("unretained", "red");
telemetry.addData("retained", new Func<String>() {
@Override public String value() {
return String.format(Locale.getDefault(), "%dms", System.currentTimeMillis());
}});
telemetry.addData("unretained", "green");
telemetry.update();
delay();
counting.setValue(2);
telemetry.update();
delay();
counting.setValue(3);
telemetry.update();
delay();
telemetry.clear();
delay();
counting.setValue(4);
telemetry.update();
delay();
}
开发者ID:forgod01，项目名称:5094-2016-2017，代码行数:32，代码来源:TestTelemetry.java
示例2: runOpMode
import org.firstinspires.ftc.robotcore.external.Func; //导入依赖的package包/类
@Override public void runOpMode() {
/* we keep track of how long it's been since the OpMode was started, just
* to have some interesting data to show */
ElapsedTime opmodeRunTime = new ElapsedTime();
// We show the log in oldest-to-newest order, as that's better for poetry
telemetry.log().setDisplayOrder(Telemetry.Log.DisplayOrder.OLDEST_FIRST);
// We can control the number of lines shown in the log
telemetry.log().setCapacity(6);
// The interval between lines of poetry, in seconds
double sPoemInterval = 0.6;
/**
* Wait until we've been given the ok to go. For something to do, we emit the
* elapsed time as we sit here and wait. If we didn't want to do anything while
* we waited, we would just call {@link #waitForStart()}.
*/
while (!isStarted()) {
telemetry.addData("time", "%.1f seconds", opmodeRunTime.seconds());
telemetry.update();
idle();
}
// Ok, we've been given the ok to go
/**
* As an illustration, the first line on our telemetry display will display the battery voltage.
* The idea here is that it's expensive to compute the voltage (at least for purposes of illustration)
* so you don't want to do it unless the data is <em>actually</em> going to make it to the
* driver station (recall that telemetry transmission is throttled to reduce bandwidth use.
* Note that getBatteryVoltage() below returns 'Infinity' if there's no voltage sensor attached.
*
* @see Telemetry#getMsTransmissionInterval()
*/
telemetry.addData("voltage", "%.1f volts", new Func<Double>() {
@Override public Double value() {
return getBatteryVoltage();
}
});
// Reset to keep some timing stats for the post-'start' part of the opmode
opmodeRunTime.reset();
int loopCount = 1;
// Go go gadget robot!
while (opModeIsActive()) {
// Emit poetry if it's been a while
if (poemElapsed.seconds() > sPoemInterval) {
emitPoemLine();
}
// As an illustration, show some loop timing information
telemetry.addData("loop count", loopCount);
telemetry.addData("ms/loop", "%.3f ms", opmodeRunTime.milliseconds() / loopCount);
// Show joystick information as some other illustrative data
telemetry.addLine("left joystick | ")
.addData("x", gamepad1.left_stick_x)
.addData("y", gamepad1.left_stick_y);
telemetry.addLine("right joystick | ")
.addData("x", gamepad1.right_stick_x)
.addData("y", gamepad1.right_stick_y);
/**
* Transmit the telemetry to the driver station, subject to throttling.
* @see Telemetry#getMsTransmissionInterval()
*/
telemetry.update();
/** Update loop info and play nice with the rest of the {@link Thread}s in the system */
loopCount++;
}
}
开发者ID:ykarim，项目名称:FTC2016，代码行数:76，代码来源:ConceptTelemetry.java
示例3: composeTelemetry
import org.firstinspires.ftc.robotcore.external.Func; //导入依赖的package包/类
void composeTelemetry() {
// At the beginning of each telemetry update, grab a bunch of data
// from the IMU that we will then display in separate lines.
telemetry.addAction(new Runnable() { @Override public void run()
{
// Acquiring the angles is relatively expensive; we don't want
// to do that in each of the three items that need that info, as that's
// three times the necessary expense.
angles = imu.getAngularOrientation().toAxesReference(AxesReference.INTRINSIC).toAxesOrder(AxesOrder.ZYX);
gravity = imu.getGravity();
}
});
telemetry.addLine()
.addData("status", new Func<String>() {
@Override public String value() {
return imu.getSystemStatus().toShortString();
}
})
.addData("calib", new Func<String>() {
@Override public String value() {
return imu.getCalibrationStatus().toString();
}
});
telemetry.addLine()
.addData("heading", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.firstAngle);
}
})
.addData("roll", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.secondAngle);
}
})
.addData("pitch", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.thirdAngle);
}
});
telemetry.addLine()
.addData("grvty", new Func<String>() {
@Override public String value() {
return gravity.toString();
}
})
.addData("mag", new Func<String>() {
@Override public String value() {
return String.format(Locale.getDefault(), "%.3f",
Math.sqrt(gravity.xAccel*gravity.xAccel
+ gravity.yAccel*gravity.yAccel
+ gravity.zAccel*gravity.zAccel));
}
});
}
开发者ID:ykarim，项目名称:FTC2016，代码行数:59，代码来源:SensorAdafruitIMU.java
示例4: composeTelemetry
import org.firstinspires.ftc.robotcore.external.Func; //导入依赖的package包/类
void composeTelemetry() {
// At the beginning of each telemetry update, grab a bunch of data
// from the IMU that we will then display in separate lines.
telemetry.addAction(new Runnable() { @Override public void run()
{
// Acquiring the angles is relatively expensive; we don't want
// to do that in each of the three items that need that info, as that's
// three times the necessary expense.
angles = imu.getAngularOrientation().toAxesReference(AxesReference.INTRINSIC).toAxesOrder(AxesOrder.ZYX);
}
});
telemetry.addLine()
.addData("status", new Func<String>() {
@Override public String value() {
return imu.getSystemStatus().toShortString();
}
})
.addData("calib", new Func<String>() {
@Override public String value() {
return imu.getCalibrationStatus().toString();
}
});
telemetry.addLine()
.addData("heading", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.firstAngle);
}
})
.addData("roll", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.secondAngle);
}
})
.addData("pitch", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.thirdAngle);
}
});
}
开发者ID:ykarim，项目名称:FTC2016，代码行数:43，代码来源:SensorAdafruitIMUCalibration.java
示例5: composeTelemetry
import org.firstinspires.ftc.robotcore.external.Func; //导入依赖的package包/类
void composeTelemetry() {
// At the beginning of each telemetry update, grab a bunch of data
// from the IMU that we will then display in separate lines.
telemetry.addAction(new Runnable() { @Override public void run()
{
// Acquiring the angles is relatively expensive; we don't want
// to do that in each of the three items that need that info, as that's
// three times the necessary expense.
angles = imu.getAngularOrientation(AxesReference.INTRINSIC, AxesOrder.ZYX, AngleUnit.DEGREES);
gravity = imu.getGravity();
}
});
telemetry.addLine()
.addData("status", new Func<String>() {
@Override public String value() {
return imu.getSystemStatus().toShortString();
}
})
.addData("calib", new Func<String>() {
@Override public String value() {
return imu.getCalibrationStatus().toString();
}
});
telemetry.addLine()
.addData("heading", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.firstAngle);
}
})
.addData("roll", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.secondAngle);
}
})
.addData("pitch", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.thirdAngle);
}
});
telemetry.addLine()
.addData("grvty", new Func<String>() {
@Override public String value() {
return gravity.toString();
}
})
.addData("mag", new Func<String>() {
@Override public String value() {
return String.format(Locale.getDefault(), "%.3f",
Math.sqrt(gravity.xAccel*gravity.xAccel
+ gravity.yAccel*gravity.yAccel
+ gravity.zAccel*gravity.zAccel));
}
});
}
开发者ID:trc492，项目名称:Ftc2018RelicRecovery，代码行数:59，代码来源:SensorBNO055IMU.java
示例6: composeTelemetry
import org.firstinspires.ftc.robotcore.external.Func; //导入依赖的package包/类
void composeTelemetry() {
// At the beginning of each telemetry update, grab a bunch of data
// from the IMU that we will then display in separate lines.
telemetry.addAction(new Runnable() { @Override public void run()
{
// Acquiring the angles is relatively expensive; we don't want
// to do that in each of the three items that need that info, as that's
// three times the necessary expense.
angles = imu.getAngularOrientation(AxesReference.INTRINSIC, AxesOrder.ZYX, AngleUnit.DEGREES);
}
});
telemetry.addLine()
.addData("status", new Func<String>() {
@Override public String value() {
return imu.getSystemStatus().toShortString();
}
})
.addData("calib", new Func<String>() {
@Override public String value() {
return imu.getCalibrationStatus().toString();
}
});
telemetry.addLine()
.addData("heading", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.firstAngle);
}
})
.addData("roll", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.secondAngle);
}
})
.addData("pitch", new Func<String>() {
@Override public String value() {
return formatAngle(angles.angleUnit, angles.thirdAngle);
}
});
}
开发者ID:trc492，项目名称:Ftc2018RelicRecovery，代码行数:43，代码来源:SensorBNO055IMUCalibration.java
示例7: runOpMode
import org.firstinspires.ftc.robotcore.external.Func; //导入依赖的package包/类
@Override public void runOpMode() throws InterruptedException {
/* we keep track of how long it's been since the OpMode was started, just
* to have some interesting data to show */
ElapsedTime opmodeRunTime = new ElapsedTime();
// We show the log in oldest-to-newest order, as that's better for poetry
telemetry.log().setDisplayOrder(Telemetry.Log.DisplayOrder.OLDEST_FIRST);
// We can control the number of lines shown in the log
telemetry.log().setCapacity(6);
// The interval between lines of poetry, in seconds
double sPoemInterval = 0.6;
/**
* Wait until we've been given the ok to go. For something to do, we emit the
* elapsed time as we sit here and wait. If we didn't want to do anything while
* we waited, we would just call {@link #waitForStart()}.
*/
while (!isStarted()) {
telemetry.addData("time", "%.1f seconds", opmodeRunTime.seconds());
telemetry.update();
idle();
}
// Ok, we've been given the ok to go
/**
* As an illustration, the first line on our telemetry display will display the battery voltage.
* The idea here is that it's expensive to compute the voltage (at least for purposes of illustration)
* so you don't want to do it unless the data is <em>actually</em> going to make it to the
* driver station (recall that telemetry transmission is throttled to reduce bandwidth use.
* Note that getBatteryVoltage() below returns 'Infinity' if there's no voltage sensor attached.
*
* @see Telemetry#getMsTransmissionInterval()
*/
telemetry.addData("voltage", "%.1f volts", new Func<Double>() {
@Override public Double value() {
return getBatteryVoltage();
}
});
// Reset to keep some timing stats for the post-'start' part of the opmode
opmodeRunTime.reset();
int loopCount = 1;
// Go go gadget robot!
while (opModeIsActive()) {
// Emit poetry if it's been a while
if (poemElapsed.seconds() > sPoemInterval) {
emitPoemLine();
}
// As an illustration, show some loop timing information
telemetry.addData("loop count", loopCount);
telemetry.addData("ms/loop", "%.3f ms", opmodeRunTime.milliseconds() / loopCount);
// Show joystick information as some other illustrative data
telemetry.addLine("left joystick | ")
.addData("x", gamepad1.left_stick_x)
.addData("y", gamepad1.left_stick_y);
telemetry.addLine("right joystick | ")
.addData("x", gamepad1.right_stick_x)
.addData("y", gamepad1.right_stick_y);
/**
* Transmit the telemetry to the driver station, subject to throttling.
* @see Telemetry#getMsTransmissionInterval()
*/
telemetry.update();
/** Update loop info and play nice with the rest of the {@link Thread}s in the system */
loopCount++;
idle();
}
}
开发者ID:forgod01，项目名称:5094-2016-2017，代码行数:77，代码来源:ConceptTelemetry.java
示例8: runOpMode
import org.firstinspires.ftc.robotcore.external.Func; //导入依赖的package包/类
@Override public void runOpMode() throws InterruptedException {
/* we keep track of how long it's been since the OpMode was started, just
* to have some interesting data to show */
ElapsedTime opmodeRunTime = new ElapsedTime();
// We show the log in oldest-to-newest order, as that's better for poetry
telemetry.log().setDisplayOrder(Telemetry.Log.DisplayOrder.OLDEST_FIRST);
// We can control the number of lines shown in the log
telemetry.log().setCapacity(6);
// The interval between lines of poetry, in seconds
double sPoemInterval = 0.6;
/**
* Wait until we've been given the ok to go. For something to do, we emit the
* elapsed time as we sit here and wait. If we didn't want to do anything while
* we waited, we would just call {@link #waitForStart()}.
*/
while (!isStarted()) {
telemetry.addData("time", "%.1f seconds", opmodeRunTime.seconds());
telemetry.update();
idle();
}
// Ok, we've been given the ok to go
/**
* As an illustration, the first line on our telemetry display will display the battery voltage.
* The idea here is that it's expensive to compute the voltage (at least for purposes of illustration)
* so you don't want to do it unless the data is <em>actually</em> going to make it to the
* driver station (recall that telemetry transmission is throttled to reduce bandwidth use.
* Note that getBatteryVoltage() below returns 'Infinity' if there's no voltage sensor attached.
*
* @see Telemetry#getMsTransmissionInterval()
*/
telemetry.addData("voltage", "%.1f volts", new Func<Double>() {
@Override public Double value() {
return getBatteryVoltage();
}
});
// Reset to keep some timing stats for the post-'start' part of the opmode
opmodeRunTime.reset();
int loopCount = 1;
// Go go gadget robot!
while (opModeIsActive()) {
// Emit poetry if it's been a while
if (poemElapsed.seconds() > sPoemInterval) {
emitPoemLine();
}
// As an illustration, show some loop timing information
telemetry.addData("loop count", loopCount);
telemetry.addData("ms/loop", "%.3f ms", opmodeRunTime.milliseconds() / loopCount);
// Show joystick information as some other illustrative data
telemetry.addLine("left joystick | ")
.addData("x", gamepad1.left_stick_x)
.addData("y", gamepad1.left_stick_y);
telemetry.addLine("right joystick | ")
.addData("x", gamepad1.right_stick_x)
.addData("y", gamepad1.right_stick_y);
/**
* Transmit the telemetry to the driver station, subject to throttling.
* @see Telemetry#getMsTransmissionInterval()
*/
telemetry.update();
/** Update loop info and play nice with the rest of the {@link Thread}s in the system */
loopCount++;
}
}
开发者ID:MHS-FIRSTrobotics，项目名称:RadicalRobotics2017，代码行数:76，代码来源:ConceptTelemetry.java
示例9: addData
import org.firstinspires.ftc.robotcore.external.Func; //导入依赖的package包/类
/**
* Adds an item to the end of the telemetry being built for driver station display. The value shown
* will be the result of calling {@link Object#toString() toString()} on the object which is
* returned from invoking valueProducer.{@link Func#value()} value()}. The caption and value are
* shown on the driver station separated by the {@link #getCaptionValueSeparator() caption value
* separator}. The item is removed if {@link #clearAll()} is called, but <em>not</em> if
* {@link #clear()} is called.
* <p>
* <p>The valueProducer is evaluated only if actual transmission to the driver station
* is to occur. This is important, as it provides a means of displaying telemetry which
* is relatively expensive to evaluate while avoiding computation or delay on evaluations
* which won't be transmitted due to transmission interval throttling.</p>
*
* @param caption the caption to use
* @param valueProducer the object which will provide the value to display
* @return an {@link Item} that can be used to update the value or append further {@link Item}s
* @see #addData(String, String, Object...)
* @see #addData(String, Object)
* @see #addData(String, String, Func)
* @see #getMsTransmissionInterval()
*/
@Override
public <T> Item addData(String caption, Func<T> valueProducer) {
return delegate.addData(caption, valueProducer);
}
开发者ID:MHS-FIRSTrobotics，项目名称:RadicalRobotics2017，代码行数:26，代码来源:ExtensibleTelemetry.java
注：本文中的org.firstinspires.ftc.robotcore.external.Func类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论