Golang gnuflag.BoolVar函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/lxc/lxd/shared/gnuflag.BoolVar函数的典型用法代码示例。如果您正苦于以下问题：Golang BoolVar函数的具体用法？Golang BoolVar怎么用？Golang BoolVar使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BoolVar函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: flags

func (c *publishCmd) flags() {
	gnuflag.BoolVar(&c.makePublic, "public", false, i18n.G("Make the image public"))
	gnuflag.Var(&c.pAliases, "alias", i18n.G("New alias to define at target"))
	gnuflag.BoolVar(&c.Force, "force", false, i18n.G("Stop the container if currently running"))
	gnuflag.BoolVar(&c.Force, "f", false, i18n.G("Stop the container if currently running"))
	gnuflag.StringVar(&c.compression_algorithm, "compression", "", i18n.G("Define a compression algorithm: for image or none"))
}

开发者ID:vahe，项目名称:lxd，代码行数:7，代码来源:publish.go

示例2: flags

func (c *launchCmd) flags() {
	massage_args()
	gnuflag.Var(&profArgs, "profile", "Profile to apply to the new container")
	gnuflag.Var(&profArgs, "p", "Profile to apply to the new container")
	gnuflag.BoolVar(&ephem, "ephemeral", false, gettext.Gettext("Ephemeral container"))
	gnuflag.BoolVar(&ephem, "e", false, gettext.Gettext("Ephemeral container"))
}

开发者ID:jumpstarter-io，项目名称:lxd，代码行数:7，代码来源:launch.go

示例3: flags

func (c *imageCmd) flags() {
	gnuflag.BoolVar(&c.publicImage, "public", false, i18n.G("Make image public"))
	gnuflag.BoolVar(&c.copyAliases, "copy-aliases", false, i18n.G("Copy aliases from source"))
	gnuflag.BoolVar(&c.autoUpdate, "auto-update", false, i18n.G("Keep the image up to date after initial copy"))
	gnuflag.Var(&c.addAliases, "alias", i18n.G("New alias to define at target"))
	gnuflag.StringVar(&c.format, "format", "table", i18n.G("Format"))
}

开发者ID:vahe，项目名称:lxd，代码行数:7，代码来源:image.go

示例4: flags

func (c *copyCmd) flags() {
	gnuflag.Var(&c.confArgs, "config", i18n.G("Config key/value to apply to the new container"))
	gnuflag.Var(&c.confArgs, "c", i18n.G("Config key/value to apply to the new container"))
	gnuflag.Var(&c.profArgs, "profile", i18n.G("Profile to apply to the new container"))
	gnuflag.Var(&c.profArgs, "p", i18n.G("Profile to apply to the new container"))
	gnuflag.BoolVar(&c.ephem, "ephemeral", false, i18n.G("Ephemeral container"))
	gnuflag.BoolVar(&c.ephem, "e", false, i18n.G("Ephemeral container"))
}

开发者ID:vahe，项目名称:lxd，代码行数:8，代码来源:copy.go

示例5: flags

func (c *actionCmd) flags() {
	if c.hasTimeout {
		gnuflag.IntVar(&c.timeout, "timeout", -1, i18n.G("Time to wait for the container before killing it."))
		gnuflag.BoolVar(&c.force, "force", false, i18n.G("Force the container to shutdown."))
		gnuflag.BoolVar(&c.stateful, "stateful", false, i18n.G("Store the container state (only for stop)."))
		gnuflag.BoolVar(&c.stateless, "stateless", false, i18n.G("Ignore the container state (only forstart)."))
	}
}

开发者ID:jameinel，项目名称:lxd，代码行数:8，代码来源:action.go

示例6: flags

func (c *launchCmd) flags() {
	massage_args()
	gnuflag.Var(&confArgs, "config", i18n.G("Config key/value to apply to the new container"))
	gnuflag.Var(&confArgs, "c", i18n.G("Config key/value to apply to the new container"))
	gnuflag.Var(&profArgs, "profile", i18n.G("Profile to apply to the new container"))
	gnuflag.Var(&profArgs, "p", i18n.G("Profile to apply to the new container"))
	gnuflag.BoolVar(&ephem, "ephemeral", false, i18n.G("Ephemeral container"))
	gnuflag.BoolVar(&ephem, "e", false, i18n.G("Ephemeral container"))
}

开发者ID:mickydelfavero，项目名称:lxd，代码行数:9，代码来源:launch.go

示例7: flags

func (c *fileCmd) flags() {
	gnuflag.IntVar(&c.uid, "uid", -1, i18n.G("Set the file's uid on push"))
	gnuflag.IntVar(&c.gid, "gid", -1, i18n.G("Set the file's gid on push"))
	gnuflag.StringVar(&c.mode, "mode", "", i18n.G("Set the file's perms on push"))
	gnuflag.BoolVar(&c.recursive, "recursive", false, i18n.G("Recursively push or pull files"))
	gnuflag.BoolVar(&c.recursive, "r", false, i18n.G("Recursively push or pull files"))
	gnuflag.BoolVar(&c.mkdirs, "create-dirs", false, i18n.G("Create any directories necessary"))
	gnuflag.BoolVar(&c.mkdirs, "p", false, i18n.G("Create any directories necessary"))
}

开发者ID:vahe，项目名称:lxd，代码行数:9，代码来源:file.go

示例8: flags

func (c *initCmd) flags() {
	c.massage_args()
	gnuflag.Var(&c.confArgs, "config", i18n.G("Config key/value to apply to the new container"))
	gnuflag.Var(&c.confArgs, "c", i18n.G("Config key/value to apply to the new container"))
	gnuflag.Var(&c.profArgs, "profile", i18n.G("Profile to apply to the new container"))
	gnuflag.Var(&c.profArgs, "p", i18n.G("Profile to apply to the new container"))
	gnuflag.BoolVar(&c.ephem, "ephemeral", false, i18n.G("Ephemeral container"))
	gnuflag.BoolVar(&c.ephem, "e", false, i18n.G("Ephemeral container"))
	gnuflag.StringVar(&c.network, "network", "", i18n.G("Network name"))
	gnuflag.StringVar(&c.network, "n", "", i18n.G("Network name"))
}

开发者ID:vahe，项目名称:lxd，代码行数:11，代码来源:init.go

示例9: flags

func (c *publishCmd) flags() {
	gnuflag.BoolVar(&makePublic, "public", false, gettext.Gettext("Make the image public"))
	gnuflag.Var(&pAliases, "alias", gettext.Gettext("New alias to define at target"))
}

开发者ID:argami，项目名称:goard，代码行数:4，代码来源:publish.go

示例10: flags

func (c *restoreCmd) flags() {
	gnuflag.BoolVar(&c.stateful, "stateful", false, i18n.G("Whether or not to restore the container's running state from snapshot (if available)"))
}

开发者ID:HPCNow，项目名称:lxd，代码行数:3，代码来源:restore.go

示例11: flags

func (c *imageCmd) flags() {
	gnuflag.BoolVar(&publicImage, "public", false, gettext.Gettext("Make image public"))
	gnuflag.BoolVar(&copyAliases, "copy-aliases", false, gettext.Gettext("Copy aliases from source"))
	gnuflag.Var(&addAliases, "alias", gettext.Gettext("New alias to define at target"))
}

开发者ID:achanda，项目名称:lxd，代码行数:5，代码来源:image.go

示例12: flags

func (c *deleteCmd) flags() {
	gnuflag.BoolVar(&c.force, "f", false, i18n.G("Force the removal of stopped containers."))
	gnuflag.BoolVar(&c.force, "force", false, i18n.G("Force the removal of stopped containers."))
	gnuflag.BoolVar(&c.interactive, "i", false, i18n.G("Require user confirmation."))
	gnuflag.BoolVar(&c.interactive, "interactive", false, i18n.G("Require user confirmation."))
}

开发者ID:akshaykarle，项目名称:lxd，代码行数:6，代码来源:delete.go

示例13: flags

func (c *remoteCmd) flags() {
	gnuflag.BoolVar(&c.acceptCert, "accept-certificate", false, i18n.G("Accept certificate"))
	gnuflag.StringVar(&c.password, "password", "", i18n.G("Remote admin password"))
	gnuflag.StringVar(&c.protocol, "protocol", "", i18n.G("Server protocol (lxd or simplestreams)"))
	gnuflag.BoolVar(&c.public, "public", false, i18n.G("Public image server"))
}

开发者ID:jameinel，项目名称:lxd，代码行数:6，代码来源:remote.go

示例14: flags

func (c *listCmd) flags() {
	gnuflag.StringVar(&c.columnsRaw, "c", "ns46tS", i18n.G("Columns"))
	gnuflag.StringVar(&c.columnsRaw, "columns", "ns46tS", i18n.G("Columns"))
	gnuflag.StringVar(&c.format, "format", "table", i18n.G("Format"))
	gnuflag.BoolVar(&c.fast, "fast", false, i18n.G("Fast mode (same as --columns=nsacPt"))
}

开发者ID:vahe，项目名称:lxd，代码行数:6，代码来源:list.go

示例15: flags

func (c *helpCmd) flags() {
	gnuflag.BoolVar(&showAll, "all", false, i18n.G("Show all commands (not just interesting ones)"))
}

开发者ID:mickydelfavero，项目名称:lxd，代码行数:3，代码来源:help.go

示例16: flags

func (c *copyCmd) flags() {
	gnuflag.BoolVar(&c.ephem, "ephemeral", false, i18n.G("Ephemeral container"))
	gnuflag.BoolVar(&c.ephem, "e", false, i18n.G("Ephemeral container"))
}

开发者ID:ccsblueboy，项目名称:lxd，代码行数:4，代码来源:copy.go

示例17: flags

func (c *snapshotCmd) flags() {
	gnuflag.BoolVar(&c.stateful, "stateful", false, i18n.G("Whether or not to snapshot the container's running state"))
}

开发者ID:HPCNow，项目名称:lxd，代码行数:3，代码来源:snapshot.go

示例18: flags

func (c *listCmd) flags() {
	gnuflag.StringVar(&c.chosenColumnRunes, "c", "ns46tS", i18n.G("Columns"))
	gnuflag.StringVar(&c.chosenColumnRunes, "columns", "ns46tS", i18n.G("Columns"))
	gnuflag.BoolVar(&c.fast, "fast", false, i18n.G("Fast mode (same as --columns=nsacPt"))
}

开发者ID:jsavikko，项目名称:lxd，代码行数:5，代码来源:list.go

示例19: flags

func (c *configCmd) flags() {
	gnuflag.BoolVar(&c.expanded, "expanded", false, i18n.G("Whether to show the expanded configuration"))
}

开发者ID:vahe，项目名称:lxd，代码行数:3，代码来源:config.go

示例20: flags

func (c *remoteCmd) flags() {
	gnuflag.BoolVar(&c.acceptCert, "accept-certificate", false, i18n.G("Accept certificate"))
	gnuflag.StringVar(&c.password, "password", "", i18n.G("Remote admin password"))
	gnuflag.BoolVar(&c.public, "public", false, i18n.G("Public image server"))
}

开发者ID:grupoz，项目名称:lxd，代码行数:5，代码来源:remote.go

注：本文中的github.com/lxc/lxd/shared/gnuflag.BoolVar函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。