本文整理汇总了Golang中github.com/juju/utils/featureflag.Enabled函数的典型用法代码示例。如果您正苦于以下问题:Golang Enabled函数的具体用法?Golang Enabled怎么用?Golang Enabled使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了Enabled函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。
示例1: addRequiredPackages
// addRequiredPackages is defined on the AdvancedPackagingConfig interface.
func (cfg *centOSCloudConfig) addRequiredPackages() {
packages := []string{
"curl",
"bridge-utils",
"cloud-utils",
"nmap-ncat",
"tmux",
}
if featureflag.Enabled(feature.DeveloperMode) {
packages = append(packages, "socat")
}
// The required packages need to come from the correct repo.
// For CentOS 7, this requires an rpm cloud archive be up.
// In the event of the addition of such a repository, its addition should
// happen in the utils/packaging/config package whilst leaving the below
// code untouched.
for _, pack := range packages {
if config.SeriesRequiresCloudArchiveTools(cfg.series) && cfg.pacconfer.IsCloudArchivePackage(pack) {
cfg.AddPackage(strings.Join(cfg.pacconfer.ApplyCloudArchiveTarget(pack), " "))
} else {
cfg.AddPackage(pack)
}
}
}
开发者ID:bac,项目名称:juju,代码行数:26,代码来源:cloudinit_centos.go
示例2: versionInitSystem
func versionInitSystem(ser string) (string, error) {
seriesos, err := series.GetOSFromSeries(ser)
if err != nil {
notFound := errors.NotFoundf("init system for series %q", ser)
return "", errors.Wrap(err, notFound)
}
switch seriesos {
case os.Windows:
return InitSystemWindows, nil
case os.Ubuntu:
switch ser {
case "precise", "quantal", "raring", "saucy", "trusty", "utopic":
return InitSystemUpstart, nil
default:
// vivid and later
if featureflag.Enabled(feature.LegacyUpstart) {
return InitSystemUpstart, nil
}
return InitSystemSystemd, nil
}
case os.CentOS:
return InitSystemSystemd, nil
}
return "", errors.NotFoundf("unknown os %q (from series %q), init system", seriesos, ser)
}
开发者ID:imoapps,项目名称:juju,代码行数:26,代码来源:discovery.go
示例3: decorateAndWriteInfo
// decorateAndWriteInfo decorates the info struct with information
// from the given cfg, and the writes that out to the filesystem.
func decorateAndWriteInfo(info configstore.EnvironInfo, cfg *config.Config) error {
// Sanity check our config.
var endpoint configstore.APIEndpoint
if cert, ok := cfg.CACert(); !ok {
return errors.Errorf("CACert is not set")
} else if uuid, ok := cfg.UUID(); !ok {
return errors.Errorf("UUID is not set")
} else if adminSecret := cfg.AdminSecret(); adminSecret == "" {
return errors.Errorf("admin-secret is not set")
} else {
endpoint = configstore.APIEndpoint{
CACert: cert,
EnvironUUID: uuid,
}
}
creds := configstore.APICredentials{
User: configstore.DefaultAdminUsername,
Password: cfg.AdminSecret(),
}
if featureflag.Enabled(feature.JES) {
endpoint.ServerUUID = endpoint.EnvironUUID
}
info.SetAPICredentials(creds)
info.SetAPIEndpoint(endpoint)
info.SetBootstrapConfig(cfg.AllAttrs())
if err := info.Write(); err != nil {
return errors.Annotatef(err, "cannot create environment info %q", cfg.Name())
}
return nil
}
开发者ID:Pankov404,项目名称:juju,代码行数:36,代码来源:open.go
示例4: DestroyController
// DestroyController implements the Environ interface.
func (e *manualEnviron) DestroyController(controllerUUID string) error {
script := `
set -x
touch %s
# If jujud is running, we then wait for a while for it to stop.
stopped=0
if pkill -%d jujud; then
for i in ` + "`seq 1 30`" + `; do
if pgrep jujud > /dev/null ; then
sleep 1
else
echo "jujud stopped"
stopped=1
break
fi
done
fi
if [ $stopped -ne 1 ]; then
# If jujud didn't stop nicely, we kill it hard here.
%spkill -9 jujud
service %s stop
fi
rm -f /etc/init/juju*
rm -f /etc/systemd/system/juju*
rm -fr %s %s
exit 0
`
var diagnostics string
if featureflag.Enabled(feature.DeveloperMode) {
diagnostics = `
echo "Dump engine report and goroutines for stuck jujud"
source /etc/profile.d/juju-introspection.sh
juju-engine-report
juju-goroutines
`
}
script = fmt.Sprintf(
script,
// WARNING: this is linked with the use of uninstallFile in
// the agent package. Don't change it without extreme care,
// and handling for mismatches with already-deployed agents.
utils.ShQuote(path.Join(
agent.DefaultPaths.DataDir,
agent.UninstallFile,
)),
terminationworker.TerminationSignal,
diagnostics,
mongo.ServiceName,
utils.ShQuote(agent.DefaultPaths.DataDir),
utils.ShQuote(agent.DefaultPaths.LogDir),
)
logger.Tracef("destroy controller script: %s", script)
stdout, stderr, err := runSSHCommand(
"[email protected]"+e.host,
[]string{"sudo", "/bin/bash"}, script,
)
logger.Debugf("script stdout: \n%s", stdout)
logger.Debugf("script stderr: \n%s", stderr)
return err
}
开发者ID:kat-co,项目名称:juju,代码行数:61,代码来源:environ.go
示例5: checkProviderType
// checkProviderType ensures the provider type is okay.
func checkProviderType(envType string) error {
featureflag.SetFlagsFromEnvironment(osenv.JujuFeatureFlagEnvKey)
flag, ok := provisionalProviders[envType]
if ok && !featureflag.Enabled(flag) {
msg := `the %q provider is provisional in this version of Juju. To use it anyway, set JUJU_DEV_FEATURE_FLAGS="%s" in your shell model`
return errors.Errorf(msg, envType, flag)
}
return nil
}
开发者ID:makyo,项目名称:juju,代码行数:10,代码来源:bootstrap.go
示例6: lookup
// lookup translates a facade name and version into a facadeRecord.
func (f *FacadeRegistry) lookup(name string, version int) (facadeRecord, error) {
if versions, ok := f.facades[name]; ok {
if record, ok := versions[version]; ok {
if featureflag.Enabled(record.feature) {
return record, nil
}
}
}
return facadeRecord{}, errors.NotFoundf("%s(%d)", name, version)
}
开发者ID:imoapps,项目名称:juju,代码行数:11,代码来源:registry.go
示例7: Write
// Write implements EnvironInfo.Write.
func (info *environInfo) Write() error {
info.mu.Lock()
defer info.mu.Unlock()
lock, err := acquireEnvironmentLock(info.environmentDir, "writing")
if err != nil {
return errors.Annotatef(err, "cannot write info")
}
defer lock.Unlock()
// In order to write out the environment info to the cache
// file we need to make sure the server UUID is set. Sufficiently
// up to date servers will write the server UUID to the JENV
// file as connections are made to the API server. It is possible
// that for an old JENV file, the first update (on API connection)
// may write a JENV file, and the subsequent update will create the
// entry in the cache file.
// If the source was the cache file, then always write there to
// avoid stale data in the cache file.
if info.source == sourceCache ||
(featureflag.Enabled(feature.JES) && info.serverUUID != "") {
if err := info.ensureNoJENV(); info.source == sourceCreated && err != nil {
return errors.Trace(err)
}
logger.Debugf("writing cache file")
filename := cacheFilename(info.environmentDir)
cache, err := readCacheFile(filename)
if err != nil {
return errors.Trace(err)
}
if err := cache.updateInfo(info); err != nil {
return errors.Trace(err)
}
if err := writeCacheFile(filename, cache); err != nil {
return errors.Trace(err)
}
oldPath := info.path
info.path = filename
// If source was jenv file, delete the jenv.
if info.source == sourceJenv {
err := os.Remove(oldPath)
if err != nil {
return errors.Trace(err)
}
}
info.source = sourceCache
} else {
logger.Debugf("writing jenv file")
if err := info.writeJENVFile(); err != nil {
return errors.Trace(err)
}
info.source = sourceJenv
}
return nil
}
开发者ID:claudiu-coblis,项目名称:juju,代码行数:55,代码来源:disk.go
示例8: descriptionFromVersions
// descriptionFromVersions aggregates the information in a versions map into a
// more friendly form for List().
func descriptionFromVersions(name string, vers versions) FacadeDescription {
intVersions := make([]int, 0, len(vers))
for version, record := range vers {
if featureflag.Enabled(record.feature) {
intVersions = append(intVersions, version)
}
}
sort.Ints(intVersions)
return FacadeDescription{
Name: name,
Versions: intVersions,
}
}
开发者ID:imoapps,项目名称:juju,代码行数:15,代码来源:registry.go
示例9: SetFlags
func (c *bootstrapCommand) SetFlags(f *gnuflag.FlagSet) {
f.Var(constraints.ConstraintsValue{Target: &c.Constraints}, "constraints", "set model constraints")
f.Var(constraints.ConstraintsValue{Target: &c.BootstrapConstraints}, "bootstrap-constraints", "specify bootstrap machine constraints")
f.StringVar(&c.BootstrapSeries, "bootstrap-series", "", "specify the series of the bootstrap machine")
if featureflag.Enabled(feature.ImageMetadata) {
f.StringVar(&c.BootstrapImage, "bootstrap-image", "", "specify the image of the bootstrap machine")
}
f.BoolVar(&c.UploadTools, "upload-tools", false, "upload local version of tools before bootstrapping")
f.StringVar(&c.MetadataSource, "metadata-source", "", "local path to use as tools and/or metadata source")
f.StringVar(&c.Placement, "to", "", "a placement directive indicating an instance to bootstrap")
f.BoolVar(&c.KeepBrokenEnvironment, "keep-broken", false, "do not destroy the model if bootstrap fails")
f.BoolVar(&c.AutoUpgrade, "auto-upgrade", false, "upgrade to the latest patch release tools on first bootstrap")
f.StringVar(&c.AgentVersionParam, "agent-version", "", "the version of tools to use for Juju agents")
}
开发者ID:exekias,项目名称:juju,代码行数:14,代码来源:bootstrap.go
示例10: SetUpTest
func (s *BaseSubnetSuite) SetUpTest(c *gc.C) {
// If any post-MVP command suite enabled the flag, keep it.
hasFeatureFlag := featureflag.Enabled(feature.PostNetCLIMVP)
s.FakeJujuXDGDataHomeSuite.SetUpTest(c)
if hasFeatureFlag {
s.FakeJujuXDGDataHomeSuite.SetFeatureFlags(feature.PostNetCLIMVP)
}
s.api = NewStubAPI()
c.Assert(s.api, gc.NotNil)
// All subcommand suites embedding this one should initialize
// s.command immediately after calling this method!
}
开发者ID:bac,项目名称:juju,代码行数:16,代码来源:package_test.go
示例11: NewSuperCommand
// NewSuperCommand creates the "subnet" supercommand and registers the
// subcommands that it supports.
func NewSuperCommand() cmd.Command {
subnetCmd := cmd.NewSuperCommand(cmd.SuperCommandParams{
Name: "subnet",
Doc: strings.TrimSpace(commandDoc),
UsagePrefix: "juju",
Purpose: "manage subnets",
})
subnetCmd.Register(envcmd.Wrap(&AddCommand{}))
subnetCmd.Register(envcmd.Wrap(&ListCommand{}))
if featureflag.Enabled(feature.PostNetCLIMVP) {
// The following commands are not part of the MVP.
subnetCmd.Register(envcmd.Wrap(&CreateCommand{}))
subnetCmd.Register(envcmd.Wrap(&RemoveCommand{}))
}
return subnetCmd
}
开发者ID:ktsakalozos,项目名称:juju,代码行数:19,代码来源:subnet.go
示例12: TestEnabled
func (s *flagSuite) TestEnabled(c *gc.C) {
c.Assert(featureflag.Enabled(""), jc.IsTrue)
c.Assert(featureflag.Enabled(" "), jc.IsTrue)
c.Assert(featureflag.Enabled("magic"), jc.IsFalse)
s.PatchEnvironment("JUJU_TESTING_FEATURE", "MAGIC")
featureflag.SetFlagsFromEnvironment("JUJU_TESTING_FEATURE")
c.Assert(featureflag.Enabled("magic"), jc.IsTrue)
c.Assert(featureflag.Enabled("Magic"), jc.IsTrue)
c.Assert(featureflag.Enabled(" MAGIC "), jc.IsTrue)
}
开发者ID:rogpeppe,项目名称:juju-utils,代码行数:12,代码来源:flags_test.go
示例13: TestEnabled
func (s *flagWinSuite) TestEnabled(c *gc.C) {
c.Assert(featureflag.Enabled(""), jc.IsTrue)
c.Assert(featureflag.Enabled(" "), jc.IsTrue)
c.Assert(featureflag.Enabled("magic"), jc.IsFalse)
s.k.SetStringValue("JUJU_TESTING_FEATURE", "MAGIC")
featureflag.SetFlagsFromRegistry(regKey, "JUJU_TESTING_FEATURE")
c.Assert(featureflag.Enabled("magic"), jc.IsTrue)
c.Assert(featureflag.Enabled("Magic"), jc.IsTrue)
c.Assert(featureflag.Enabled(" MAGIC "), jc.IsTrue)
}
开发者ID:juju,项目名称:utils,代码行数:12,代码来源:flags_windows_test.go
示例14: NewSuperCommand
// NewSuperCommand creates the "space" supercommand and registers the
// subcommands that it supports.
func NewSuperCommand() cmd.Command {
spaceCmd := cmd.NewSuperCommand(cmd.SuperCommandParams{
Name: "space",
Doc: strings.TrimSpace(commandDoc),
UsagePrefix: "juju",
Purpose: "manage network spaces",
})
spaceCmd.Register(newCreateCommand())
spaceCmd.Register(newListCommand())
if featureflag.Enabled(feature.PostNetCLIMVP) {
// The following commands are not part of the MVP.
spaceCmd.Register(newRemoveCommand())
spaceCmd.Register(newUpdateCommand())
spaceCmd.Register(newRenameCommand())
}
return spaceCmd
}
开发者ID:imoapps,项目名称:juju,代码行数:20,代码来源:space.go
示例15: SetFlags
func (c *bootstrapCommand) SetFlags(f *gnuflag.FlagSet) {
f.Var(constraints.ConstraintsValue{Target: &c.Constraints}, "constraints", "Set model constraints")
f.Var(constraints.ConstraintsValue{Target: &c.BootstrapConstraints}, "bootstrap-constraints", "Specify bootstrap machine constraints")
f.StringVar(&c.BootstrapSeries, "bootstrap-series", "", "Specify the series of the bootstrap machine")
if featureflag.Enabled(feature.ImageMetadata) {
f.StringVar(&c.BootstrapImage, "bootstrap-image", "", "Specify the image of the bootstrap machine")
}
f.BoolVar(&c.UploadTools, "upload-tools", false, "Upload local version of tools before bootstrapping")
f.StringVar(&c.MetadataSource, "metadata-source", "", "Local path to use as tools and/or metadata source")
f.StringVar(&c.Placement, "to", "", "Placement directive indicating an instance to bootstrap")
f.BoolVar(&c.KeepBrokenEnvironment, "keep-broken", false, "Do not destroy the model if bootstrap fails")
f.BoolVar(&c.AutoUpgrade, "auto-upgrade", false, "Upgrade to the latest patch release tools on first bootstrap")
f.StringVar(&c.AgentVersionParam, "agent-version", "", "Version of tools to use for Juju agents")
f.StringVar(&c.CredentialName, "credential", "", "Credentials to use when bootstrapping")
f.Var(&c.config, "config", "Specify a controller configuration file, or one or more configuration\n options\n (--config config.yaml [--config key=value ...])")
f.StringVar(&c.hostedModelName, "d", defaultHostedModelName, "Name of the default hosted model for the controller")
f.StringVar(&c.hostedModelName, "default-model", defaultHostedModelName, "Name of the default hosted model for the controller")
f.BoolVar(&c.noGUI, "no-gui", false, "Do not install the Juju GUI in the controller when bootstrapping")
}
开发者ID:makyo,项目名称:juju,代码行数:19,代码来源:bootstrap.go
示例16: NewSuperCommand
// NewSuperCommand creates the metadata plugin supercommand and registers the
// subcommands that it supports.
func NewSuperCommand() cmd.Command {
metadatacmd := cmd.NewSuperCommand(cmd.SuperCommandParams{
Name: "metadata",
UsagePrefix: "juju",
Doc: metadataDoc,
Purpose: "tools for generating and validating image and tools metadata",
Log: &cmd.Log{}})
metadatacmd.Register(newValidateImageMetadataCommand())
metadatacmd.Register(newImageMetadataCommand())
metadatacmd.Register(newToolsMetadataCommand())
metadatacmd.Register(newValidateToolsMetadataCommand())
metadatacmd.Register(newSignMetadataCommand())
if featureflag.Enabled(feature.ImageMetadata) {
metadatacmd.Register(newListImagesCommand())
metadatacmd.Register(newAddImageMetadataCommand())
metadatacmd.Register(newDeleteImageMetadataCommand())
}
return metadatacmd
}
开发者ID:exekias,项目名称:juju,代码行数:22,代码来源:metadata.go
示例17: SetFlags
func (c *bootstrapCommand) SetFlags(f *gnuflag.FlagSet) {
c.ModelCommandBase.SetFlags(f)
f.StringVar(&c.ConstraintsStr, "constraints", "", "Set model constraints")
f.StringVar(&c.BootstrapConstraintsStr, "bootstrap-constraints", "", "Specify bootstrap machine constraints")
f.StringVar(&c.BootstrapSeries, "bootstrap-series", "", "Specify the series of the bootstrap machine")
if featureflag.Enabled(feature.ImageMetadata) {
f.StringVar(&c.BootstrapImage, "bootstrap-image", "", "Specify the image of the bootstrap machine")
}
f.BoolVar(&c.BuildAgent, "build-agent", false, "Build local version of agent binary before bootstrapping")
f.StringVar(&c.MetadataSource, "metadata-source", "", "Local path to use as tools and/or metadata source")
f.StringVar(&c.Placement, "to", "", "Placement directive indicating an instance to bootstrap")
f.BoolVar(&c.KeepBrokenEnvironment, "keep-broken", false, "Do not destroy the model if bootstrap fails")
f.BoolVar(&c.AutoUpgrade, "auto-upgrade", false, "Upgrade to the latest patch release tools on first bootstrap")
f.StringVar(&c.AgentVersionParam, "agent-version", "", "Version of tools to use for Juju agents")
f.StringVar(&c.CredentialName, "credential", "", "Credentials to use when bootstrapping")
f.Var(&c.config, "config", "Specify a controller configuration file, or one or more configuration\n options\n (--config config.yaml [--config key=value ...])")
f.StringVar(&c.hostedModelName, "d", defaultHostedModelName, "Name of the default hosted model for the controller")
f.StringVar(&c.hostedModelName, "default-model", defaultHostedModelName, "Name of the default hosted model for the controller")
f.BoolVar(&c.noGUI, "no-gui", false, "Do not install the Juju GUI in the controller when bootstrapping")
f.BoolVar(&c.showClouds, "clouds", false, "Print the available clouds which can be used to bootstrap a Juju environment")
f.StringVar(&c.showRegionsForCloud, "regions", "", "Print the available regions for the specified cloud")
}
开发者ID:kat-co,项目名称:juju,代码行数:22,代码来源:bootstrap.go
示例18: addRequiredPackages
// addRequiredPackages is defined on the AdvancedPackagingConfig interface.
func (cfg *ubuntuCloudConfig) addRequiredPackages() {
packages := []string{
"curl",
"cpu-checker",
// TODO(axw) 2014-07-02 #1277359
// Don't install bridge-utils in cloud-init;
// leave it to the networker worker.
"bridge-utils",
"cloud-utils",
"tmux",
}
if featureflag.Enabled(feature.DeveloperMode) {
packages = append(packages, "socat")
}
// The required packages need to come from the correct repo.
// For precise, that might require an explicit --target-release parameter.
// We cannot just pass packages below, because
// this will generate install commands which older
// versions of cloud-init (e.g. 0.6.3 in precise) will
// interpret incorrectly (see bug http://pad.lv/1424777).
for _, pack := range packages {
if config.SeriesRequiresCloudArchiveTools(cfg.series) && cfg.pacconfer.IsCloudArchivePackage(pack) {
// On precise, we need to pass a --target-release entry in
// pieces (as "packages") for it to work:
// --target-release, precise-updates/cloud-tools,
// package-name. All these 3 entries are needed so
// cloud-init 0.6.3 can generate the correct apt-get
// install command line for "package-name".
args := cfg.pacconfer.ApplyCloudArchiveTarget(pack)
for _, arg := range args {
cfg.AddPackage(arg)
}
} else {
cfg.AddPackage(pack)
}
}
}
开发者ID:bac,项目名称:juju,代码行数:39,代码来源:cloudinit_ubuntu.go
示例19: NewSuperCommand
// NewSuperCommand creates the environment supercommand and registers the
// subcommands that it supports.
func NewSuperCommand() cmd.Command {
environmentCmd := cmd.NewSuperCommand(cmd.SuperCommandParams{
Name: "environment",
Doc: commandDoc,
UsagePrefix: "juju",
Purpose: "manage environments",
})
environmentCmd.Register(newGetCommand())
environmentCmd.Register(newSetCommand())
environmentCmd.Register(newUnsetCommand())
environmentCmd.Register(&JenvCommand{})
environmentCmd.Register(newRetryProvisioningCommand())
environmentCmd.Register(newEnvSetConstraintsCommand())
environmentCmd.Register(newEnvGetConstraintsCommand())
if featureflag.Enabled(feature.JES) {
environmentCmd.Register(newShareCommand())
environmentCmd.Register(newUnshareCommand())
environmentCmd.Register(newUsersCommand())
environmentCmd.Register(newDestroyCommand())
}
return environmentCmd
}
开发者ID:snailwalker,项目名称:juju,代码行数:25,代码来源:environment.go
示例20: NewSuperCommand
// NewSuperCommand returns a new backups super-command.
func NewSuperCommand() cmd.Command {
if featureflag.Enabled(feature.JES) {
backupsDoc = jesBackupsDoc
}
backupsCmd := Command{
SuperCommand: *cmd.NewSuperCommand(
cmd.SuperCommandParams{
Name: "backups",
Doc: backupsDoc,
UsagePrefix: "juju",
Purpose: backupsPurpose,
},
),
}
backupsCmd.Register(newCreateCommand())
backupsCmd.Register(newInfoCommand())
backupsCmd.Register(newListCommand())
backupsCmd.Register(newDownloadCommand())
backupsCmd.Register(newUploadCommand())
backupsCmd.Register(newRemoveCommand())
backupsCmd.Register(newRestoreCommand())
return &backupsCmd
}
开发者ID:snailwalker,项目名称:juju,代码行数:25,代码来源:backups.go
注:本文中的github.com/juju/utils/featureflag.Enabled函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论