本文整理汇总了Golang中github.com/juju/juju/worker/provisioner.SetObserver函数的典型用法代码示例。如果您正苦于以下问题:Golang SetObserver函数的具体用法?Golang SetObserver怎么用?Golang SetObserver使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了SetObserver函数的4个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。
示例1: assertProvisionerObservesConfigChanges
func (s *CommonProvisionerSuite) assertProvisionerObservesConfigChanges(c *gc.C, p provisioner.Provisioner) {
// Inject our observer into the provisioner
cfgObserver := make(chan *config.Config, 1)
provisioner.SetObserver(p, cfgObserver)
// Switch to reaping on All machines.
attrs := map[string]interface{}{
config.ProvisionerHarvestModeKey: config.HarvestAll.String(),
}
err := s.State.UpdateEnvironConfig(attrs, nil, nil)
c.Assert(err, jc.ErrorIsNil)
s.BackingState.StartSync()
// Wait for the PA to load the new configuration. We wait for the change we expect
// like this because sometimes we pick up the initial harvest config (destroyed)
// rather than the one we change to (all).
received := []string{}
for {
select {
case newCfg := <-cfgObserver:
if newCfg.ProvisionerHarvestMode().String() == config.HarvestAll.String() {
return
}
received = append(received, newCfg.ProvisionerHarvestMode().String())
case <-time.After(coretesting.LongWait):
if len(received) == 0 {
c.Fatalf("PA did not action config change")
} else {
c.Fatalf("timed out waiting for config to change to '%s', received %+v",
config.HarvestAll.String(), received)
}
}
}
}
开发者ID:felicianotech,项目名称:juju,代码行数:35,代码来源:provisioner_test.go
示例2: TestProvisionerObservesConfigChanges
func (s *ProvisionerSuite) TestProvisionerObservesConfigChanges(c *gc.C) {
p := s.newEnvironProvisioner(c)
defer stop(c, p)
// create a machine
m0, err := s.addMachine()
c.Assert(err, gc.IsNil)
i0 := s.checkStartInstance(c, m0)
// create a second machine
m1, err := s.addMachine()
c.Assert(err, gc.IsNil)
i1 := s.checkStartInstance(c, m1)
// mark the first machine as dead
c.Assert(m0.EnsureDead(), gc.IsNil)
// remove the second machine entirely from state
c.Assert(m1.EnsureDead(), gc.IsNil)
c.Assert(m1.Remove(), gc.IsNil)
// We default to the destroyed method. Only the one we know is
// dead should be stopped; not the unknown instance.
s.checkStopSomeInstances(c, []instance.Instance{i0}, []instance.Instance{i1})
s.waitRemoved(c, m0)
// insert our observer
cfgObserver := make(chan *config.Config, 1)
provisioner.SetObserver(p, cfgObserver)
// Switch to reaping on Destroyed machines.
attrs := map[string]interface{}{
"provisioner-harvest-mode": config.HarvestDestroyed.String(),
}
err = s.State.UpdateEnvironConfig(attrs, nil, nil)
c.Assert(err, gc.IsNil)
s.BackingState.StartSync()
// wait for the PA to load the new configuration
select {
case newCfg := <-cfgObserver:
c.Assert(
newCfg.ProvisionerHarvestMode().String(),
gc.Equals,
config.HarvestDestroyed.String(),
)
case <-time.After(coretesting.LongWait):
c.Fatalf("PA did not action config change")
}
m3, err := s.addMachine()
c.Assert(err, gc.IsNil)
s.checkStartInstance(c, m3)
}
开发者ID:zhouqt,项目名称:juju,代码行数:55,代码来源:provisioner_test.go
示例3: TestProvisioningRecoversAfterInvalidEnvironmentPublished
func (s *ProvisionerSuite) TestProvisioningRecoversAfterInvalidEnvironmentPublished(c *gc.C) {
s.PatchValue(provisioner.GetToolsFinder, func(*apiprovisioner.State) provisioner.ToolsFinder {
return mockToolsFinder{}
})
p := s.newEnvironProvisioner(c)
defer stop(c, p)
// place a new machine into the state
m, err := s.addMachine()
c.Assert(err, gc.IsNil)
s.checkStartInstance(c, m)
s.invalidateEnvironment(c)
s.BackingState.StartSync()
// create a second machine
m, err = s.addMachine()
c.Assert(err, gc.IsNil)
// the PA should create it using the old environment
s.checkStartInstance(c, m)
err = s.fixEnvironment(c)
c.Assert(err, gc.IsNil)
// insert our observer
cfgObserver := make(chan *config.Config, 1)
provisioner.SetObserver(p, cfgObserver)
err = s.State.UpdateEnvironConfig(map[string]interface{}{"secret": "beef"}, nil, nil)
c.Assert(err, gc.IsNil)
s.BackingState.StartSync()
// wait for the PA to load the new configuration
select {
case <-cfgObserver:
case <-time.After(coretesting.LongWait):
c.Fatalf("PA did not action config change")
}
// create a third machine
m, err = s.addMachine()
c.Assert(err, gc.IsNil)
// the PA should create it using the new environment
s.checkStartInstanceCustom(c, m, "beef", s.defaultConstraints, nil, nil, nil, true)
}
开发者ID:zhouqt,项目名称:juju,代码行数:48,代码来源:provisioner_test.go
示例4: TestProvisioningSafeModeChange
func (s *ProvisionerSuite) TestProvisioningSafeModeChange(c *gc.C) {
p := s.newEnvironProvisioner(c)
defer stop(c, p)
// First check that safe mode is initially off.
// create a machine
m0, err := s.addMachine()
c.Assert(err, gc.IsNil)
i0 := s.checkStartInstance(c, m0)
// create a second machine
m1, err := s.addMachine()
c.Assert(err, gc.IsNil)
i1 := s.checkStartInstance(c, m1)
// mark the first machine as dead
c.Assert(m0.EnsureDead(), gc.IsNil)
// remove the second machine entirely from state
c.Assert(m1.EnsureDead(), gc.IsNil)
c.Assert(m1.Remove(), gc.IsNil)
s.checkStopInstances(c, i0, i1)
s.waitRemoved(c, m0)
// insert our observer
cfgObserver := make(chan *config.Config, 1)
provisioner.SetObserver(p, cfgObserver)
// turn on safe mode
attrs := map[string]interface{}{"provisioner-safe-mode": true}
err = s.State.UpdateEnvironConfig(attrs, nil, nil)
c.Assert(err, gc.IsNil)
s.BackingState.StartSync()
// wait for the PA to load the new configuration
select {
case <-cfgObserver:
case <-time.After(coretesting.LongWait):
c.Fatalf("PA did not action config change")
}
// Now check that the provisioner has noticed safe mode is on.
// create a machine
m3, err := s.addMachine()
c.Assert(err, gc.IsNil)
i3 := s.checkStartInstance(c, m3)
// create an instance out of band
i4 := s.startUnknownInstance(c, "999")
// mark the machine as dead
c.Assert(m3.EnsureDead(), gc.IsNil)
// check the machine's instance is stopped, and the other isn't
s.checkStopSomeInstances(c, []instance.Instance{i3}, []instance.Instance{i4})
s.waitRemoved(c, m3)
}
开发者ID:kapilt,项目名称:juju,代码行数:61,代码来源:provisioner_test.go
注:本文中的github.com/juju/juju/worker/provisioner.SetObserver函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论