Golang testing.ProviderCall函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/juju/juju/apiserver/testing.ProviderCall函数的典型用法代码示例。如果您正苦于以下问题：Golang ProviderCall函数的具体用法？Golang ProviderCall怎么用？Golang ProviderCall使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ProviderCall函数的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: TestAllZonesWithNoBackingZonesAndSetFails

func (s *SubnetsSuite) TestAllZonesWithNoBackingZonesAndSetFails(c *gc.C) {
	apiservertesting.BackingInstance.SetUp(c, apiservertesting.StubZonedEnvironName, apiservertesting.WithoutZones, apiservertesting.WithSpaces, apiservertesting.WithSubnets)
	apiservertesting.SharedStub.SetErrors(
		nil, // Backing.AvailabilityZones
		nil, // Backing.EnvironConfig
		nil, // Provider.Open
		nil, // ZonedEnviron.AvailabilityZones
		errors.NotSupportedf("setting"), // Backing.SetAvailabilityZones
	)

	results, err := s.facade.AllZones()
	c.Assert(err, gc.ErrorMatches,
		`cannot update known zones: setting not supported`,
	)
	// Verify the cause is not obscured.
	c.Assert(err, jc.Satisfies, errors.IsNotSupported)
	c.Assert(results, jc.DeepEquals, params.ZoneResults{})

	apiservertesting.CheckMethodCalls(c, apiservertesting.SharedStub,
		apiservertesting.BackingCall("AvailabilityZones"),
		apiservertesting.BackingCall("EnvironConfig"),
		apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),
		apiservertesting.ZonedEnvironCall("AvailabilityZones"),
		apiservertesting.BackingCall("SetAvailabilityZones", apiservertesting.ProviderInstance.Zones),
	)
}

开发者ID:mhilton，项目名称:juju，代码行数:26，代码来源:subnets_test.go

示例2: TestAllZonesWithNoBackingZonesAndOpenFails

func (s *SubnetsSuite) TestAllZonesWithNoBackingZonesAndOpenFails(c *gc.C) {
	apiservertesting.BackingInstance.SetUp(
		c,
		apiservertesting.StubZonedEnvironName,
		apiservertesting.WithoutZones,
		apiservertesting.WithSpaces,
		apiservertesting.WithSubnets)

	apiservertesting.SharedStub.SetErrors(
		nil, // Backing.AvailabilityZones
		nil, // Backing.ModelConfig
		nil, // Backing.CloudSpec
		errors.NotValidf("config"), // Provider.Open
	)

	results, err := networkingcommon.AllZones(apiservertesting.BackingInstance)
	c.Assert(err, gc.ErrorMatches,
		`cannot update known zones: opening environment: config not valid`,
	)
	// Verify the cause is not obscured.
	c.Assert(err, jc.Satisfies, errors.IsNotValid)
	c.Assert(results, jc.DeepEquals, params.ZoneResults{})

	apiservertesting.CheckMethodCalls(c, apiservertesting.SharedStub,
		apiservertesting.BackingCall("AvailabilityZones"),
		apiservertesting.BackingCall("ModelConfig"),
		apiservertesting.BackingCall("CloudSpec"),
		apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),
	)
}

开发者ID:bac，项目名称:juju，代码行数:30，代码来源:subnets_test.go

示例3: TestAllZonesWithNoBackingZonesUpdates

func (s *SubnetsSuite) TestAllZonesWithNoBackingZonesUpdates(c *gc.C) {
	apiservertesting.BackingInstance.SetUp(c, apiservertesting.StubZonedEnvironName, apiservertesting.WithoutZones, apiservertesting.WithSpaces, apiservertesting.WithSubnets)

	results, err := s.facade.AllZones()
	c.Assert(err, jc.ErrorIsNil)
	s.AssertAllZonesResult(c, results, apiservertesting.ProviderInstance.Zones)

	apiservertesting.CheckMethodCalls(c, apiservertesting.SharedStub,
		apiservertesting.BackingCall("AvailabilityZones"),
		apiservertesting.BackingCall("EnvironConfig"),
		apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),
		apiservertesting.ZonedEnvironCall("AvailabilityZones"),
		apiservertesting.BackingCall("SetAvailabilityZones", apiservertesting.ProviderInstance.Zones),
	)
}

开发者ID:mhilton，项目名称:juju，代码行数:15，代码来源:subnets_test.go

示例4: TestAllZonesWithNoBackingZonesAndZonesNotSupported

func (s *SubnetsSuite) TestAllZonesWithNoBackingZonesAndZonesNotSupported(c *gc.C) {
	apiservertesting.BackingInstance.SetUp(c, apiservertesting.StubEnvironName, apiservertesting.WithoutZones, apiservertesting.WithSpaces, apiservertesting.WithSubnets)
	// ZonedEnviron not supported

	results, err := s.facade.AllZones()
	c.Assert(err, gc.ErrorMatches,
		`cannot update known zones: availability zones not supported`,
	)
	// Verify the cause is not obscured.
	c.Assert(err, jc.Satisfies, errors.IsNotSupported)
	c.Assert(results, jc.DeepEquals, params.ZoneResults{})

	apiservertesting.CheckMethodCalls(c, apiservertesting.SharedStub,
		apiservertesting.BackingCall("AvailabilityZones"),
		apiservertesting.BackingCall("ModelConfig"),
		apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),
	)
}

开发者ID:exekias，项目名称:juju，代码行数:18，代码来源:subnets_test.go

示例5: checkCreateSpaces

func (s *SpacesSuite) checkCreateSpaces(c *gc.C, p checkCreateSpacesParams) {
	args := params.CreateSpaceParams{}
	if p.Name != "" {
		args.SpaceTag = "space-" + p.Name
	}
	if len(p.Subnets) > 0 {
		for _, cidr := range p.Subnets {
			args.SubnetTags = append(args.SubnetTags, "subnet-"+cidr)
		}
	}
	args.Public = p.Public
	args.ProviderId = p.ProviderId

	spaces := params.CreateSpacesParams{}
	spaces.Spaces = append(spaces.Spaces, args)
	results, err := networkingcommon.CreateSpaces(apiservertesting.BackingInstance, spaces)

	c.Assert(len(results.Results), gc.Equals, 1)
	c.Assert(err, gc.IsNil)
	if p.Error == "" {
		c.Assert(results.Results[0].Error, gc.IsNil)
	} else {
		c.Assert(results.Results[0].Error, gc.NotNil)
		c.Assert(results.Results[0].Error, gc.ErrorMatches, p.Error)
	}

	baseCalls := []apiservertesting.StubMethodCall{
		apiservertesting.BackingCall("ModelConfig"),
		apiservertesting.BackingCall("CloudSpec"),
		apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),
		apiservertesting.ZonedNetworkingEnvironCall("SupportsSpaces"),
	}

	addSpaceCalls := append(baseCalls, apiservertesting.BackingCall("AddSpace", p.Name, network.Id(p.ProviderId), p.Subnets, p.Public))

	if p.Error == "" {
		apiservertesting.CheckMethodCalls(c, apiservertesting.SharedStub, addSpaceCalls...)
	} else {
		apiservertesting.CheckMethodCalls(c, apiservertesting.SharedStub, baseCalls...)
	}
}

开发者ID:bac，项目名称:juju，代码行数:41，代码来源:spaces_test.go

示例6: CheckAddSubnetsFails

func (s *SubnetsSuite) CheckAddSubnetsFails(
	c *gc.C, envName string,
	withZones, withSpaces, withSubnets apiservertesting.SetUpFlag,
	expectedError string,
) {

	apiservertesting.BackingInstance.SetUp(c, envName, withZones, withSpaces, withSubnets)

	// These calls always happen.
	expectedCalls := []apiservertesting.StubMethodCall{
		apiservertesting.BackingCall("EnvironConfig"),
		apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),
	}

	// Subnets is also always called. but the receiver is different.
	switch envName {
	case apiservertesting.StubNetworkingEnvironName:
		expectedCalls = append(
			expectedCalls,
			apiservertesting.NetworkingEnvironCall("Subnets", instance.UnknownId, []network.Id(nil)),
		)
	case apiservertesting.StubZonedNetworkingEnvironName:
		expectedCalls = append(
			expectedCalls,
			apiservertesting.ZonedNetworkingEnvironCall("Subnets", instance.UnknownId, []network.Id(nil)),
		)
	}

	if !withSubnets {
		// Set provider subnets to empty for this test.
		originalSubnets := make([]network.SubnetInfo, len(apiservertesting.ProviderInstance.Subnets))
		copy(originalSubnets, apiservertesting.ProviderInstance.Subnets)
		apiservertesting.ProviderInstance.Subnets = []network.SubnetInfo{}

		defer func() {
			apiservertesting.ProviderInstance.Subnets = make([]network.SubnetInfo, len(originalSubnets))
			copy(apiservertesting.ProviderInstance.Subnets, originalSubnets)
		}()

		if envName == apiservertesting.StubEnvironName || envName == apiservertesting.StubNetworkingEnvironName {
			// networking is either not supported or no subnets are
			// defined, so expected the same calls for each of the two
			// arguments to AddSubnets() below.
			expectedCalls = append(expectedCalls, expectedCalls...)
		}
	} else {
		// Having subnets implies spaces will be cached as well.
		expectedCalls = append(expectedCalls, apiservertesting.BackingCall("AllSpaces"))
	}

	if withSpaces && withSubnets {
		// Having both subnets and spaces means we'll also cache zones.
		expectedCalls = append(expectedCalls, apiservertesting.BackingCall("AvailabilityZones"))
	}

	if !withZones && withSpaces {
		// Set provider zones to empty for this test.
		originalZones := make([]providercommon.AvailabilityZone, len(apiservertesting.ProviderInstance.Zones))
		copy(originalZones, apiservertesting.ProviderInstance.Zones)
		apiservertesting.ProviderInstance.Zones = []providercommon.AvailabilityZone{}

		defer func() {
			apiservertesting.ProviderInstance.Zones = make([]providercommon.AvailabilityZone, len(originalZones))
			copy(apiservertesting.ProviderInstance.Zones, originalZones)
		}()

		// updateZones tries to constructs a ZonedEnviron with these calls.
		zoneCalls := append([]apiservertesting.StubMethodCall{},
			apiservertesting.BackingCall("EnvironConfig"),
			apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),
		)
		// Receiver can differ according to envName, but
		// AvailabilityZones() will be called on either receiver.
		switch envName {
		case apiservertesting.StubZonedEnvironName:
			zoneCalls = append(
				zoneCalls,
				apiservertesting.ZonedEnvironCall("AvailabilityZones"),
			)
		case apiservertesting.StubZonedNetworkingEnvironName:
			zoneCalls = append(
				zoneCalls,
				apiservertesting.ZonedNetworkingEnvironCall("AvailabilityZones"),
			)
		}
		// Finally after caching provider zones backing zones are
		// updated.
		zoneCalls = append(
			zoneCalls,
			apiservertesting.BackingCall("SetAvailabilityZones", apiservertesting.ProviderInstance.Zones),
		)

		// Now, because we have 2 arguments to AddSubnets() below, we
		// need to expect the same zoneCalls twice, with a
		// AvailabilityZones backing lookup between them.
		expectedCalls = append(expectedCalls, zoneCalls...)
		expectedCalls = append(expectedCalls, apiservertesting.BackingCall("AvailabilityZones"))
		expectedCalls = append(expectedCalls, zoneCalls...)
	}

//.........这里部分代码省略.........

开发者ID:mhilton，项目名称:juju，代码行数:101，代码来源:subnets_test.go

示例7: TestAddSubnetsParamsCombinations


//.........这里部分代码省略.........
		{`Zones contain unknown zones: "missing"`, nil},
		{`Zones contain unavailable zones: "zone2", "zone4"`, nil},
		{`Zones contain unavailable zones: "zone4"`, nil},
		{"state not found", params.IsCodeNotFound},
		{`Zones contain unavailable zones: "zone2"`, nil},
		{"", nil},
		{"", nil},
		{"", nil},
	}
	expectedBackingInfos := []common.BackingSubnetInfo{{
		ProviderId:        "sn-ipv6",
		CIDR:              "2001:db8::/32",
		VLANTag:           0,
		AllocatableIPHigh: "",
		AllocatableIPLow:  "",
		AvailabilityZones: []string{"zone1"},
		SpaceName:         "dmz",
	}, {
		ProviderId:        "vlan-42",
		CIDR:              "10.30.1.0/24",
		VLANTag:           42,
		AllocatableIPHigh: "",
		AllocatableIPLow:  "",
		AvailabilityZones: []string{"zone3"},
		SpaceName:         "private",
	}, {
		ProviderId:        "sn-zadf00d",
		CIDR:              "10.10.0.0/24",
		VLANTag:           0,
		AllocatableIPHigh: "10.10.0.100",
		AllocatableIPLow:  "10.10.0.10",
		AvailabilityZones: []string{"zone1"},
		SpaceName:         "private",
	}}
	c.Check(expectedErrors, gc.HasLen, len(args.Subnets))
	results, err := s.facade.AddSubnets(args)
	c.Assert(err, jc.ErrorIsNil)
	c.Assert(len(results.Results), gc.Equals, len(args.Subnets))
	for i, result := range results.Results {
		c.Logf("result #%d: expected: %q", i, expectedErrors[i].message)
		if expectedErrors[i].message == "" {
			if !c.Check(result.Error, gc.IsNil) {
				c.Logf("unexpected error: %v; args: %#v", result.Error, args.Subnets[i])
			}
			continue
		}
		if !c.Check(result.Error, gc.NotNil) {
			c.Logf("unexpected success; args: %#v", args.Subnets[i])
			continue
		}
		c.Check(result.Error.Message, gc.Equals, expectedErrors[i].message)
		if expectedErrors[i].satisfier != nil {
			c.Check(result.Error, jc.Satisfies, expectedErrors[i].satisfier)
		} else {
			c.Check(result.Error.Code, gc.Equals, "")
		}
	}

	apiservertesting.CheckMethodCalls(c, apiservertesting.SharedStub,
		// caching subnets (1st attempt): fails
		apiservertesting.BackingCall("EnvironConfig"),

		// caching subnets (2nd attepmt): fails
		apiservertesting.BackingCall("EnvironConfig"),
		apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),

		// caching subnets (3rd attempt): fails
		apiservertesting.BackingCall("EnvironConfig"),
		apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),
		apiservertesting.NetworkingEnvironCall("Subnets", instance.UnknownId, []network.Id(nil)),

		// caching subnets (4th attempt): succeeds
		apiservertesting.BackingCall("EnvironConfig"),
		apiservertesting.ProviderCall("Open", apiservertesting.BackingInstance.EnvConfig),
		apiservertesting.NetworkingEnvironCall("Subnets", instance.UnknownId, []network.Id(nil)),

		// caching spaces (1st and 2nd attempts)
		apiservertesting.BackingCall("AllSpaces"),
		apiservertesting.BackingCall("AllSpaces"),

		// cacing zones (1st and 2nd attempts)
		apiservertesting.BackingCall("AvailabilityZones"),
		apiservertesting.BackingCall("AvailabilityZones"),

		// validation done; adding subnets to backing store
		apiservertesting.BackingCall("AddSubnet", expectedBackingInfos[0]),
		apiservertesting.BackingCall("AddSubnet", expectedBackingInfos[0]),
		apiservertesting.BackingCall("AddSubnet", expectedBackingInfos[1]),
		apiservertesting.BackingCall("AddSubnet", expectedBackingInfos[2]),
	)
	apiservertesting.ResetStub(apiservertesting.SharedStub)

	// Finally, check that no params yields no results.
	results, err = s.facade.AddSubnets(params.AddSubnetsParams{})
	c.Assert(err, jc.ErrorIsNil)
	c.Assert(results.Results, gc.NotNil)
	c.Assert(results.Results, gc.HasLen, 0)

	apiservertesting.CheckMethodCalls(c, apiservertesting.SharedStub)
}

开发者ID:mhilton，项目名称:juju，代码行数:101，代码来源:subnets_test.go

注：本文中的github.com/juju/juju/apiserver/testing.ProviderCall函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。