Golang napping.Params类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/jmcvetta/napping.Params类的典型用法代码示例。如果您正苦于以下问题：Golang Params类的具体用法？Golang Params怎么用？Golang Params使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了Params类的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: ListEntities

func ListEntities(endpoint string, params napping.Params) []*Entity {
	var wg sync.WaitGroup
	entities := make([]*Entity, popularMoviesMaxPages*moviesPerPage)
	params["api_key"] = apiKey
	params["language"] = "en"

	wg.Add(popularMoviesMaxPages)
	for i := 0; i < popularMoviesMaxPages; i++ {
		go func(page int) {
			defer wg.Done()
			var tmp *EntityList
			tmpParams := napping.Params{
				"page": strconv.Itoa(popularMoviesStartPage + page),
			}
			for k, v := range params {
				tmpParams[k] = v
			}
			p := tmpParams.AsUrlValues()
			rateLimiter.Call(func() {
				napping.Get(
					tmdbEndpoint+endpoint,
					&p,
					&tmp,
					nil,
				)
			})
			for i, entity := range tmp.Results {
				entities[page*moviesPerPage+i] = entity
			}
		}(i)
	}
	wg.Wait()

	return entities
}

开发者ID:daniloharuo，项目名称:pulsar，代码行数:35，代码来源:tmdb.go

示例2: ListShows

func ListShows(endpoint string, params napping.Params, page int) (shows Shows) {
	var results *EntityList

	params["page"] = strconv.Itoa(startPage + page)
	params["api_key"] = apiKey
	p := params.AsUrlValues()

	rateLimiter.Call(func() {
		resp, err := napping.Get(
			tmdbEndpoint + endpoint,
			&p,
			&results,
			nil,
		)
		if err != nil {
			log.Error(err.Error())
			xbmc.Notify("Quasar", "ListShows failed, check your logs.", config.AddonIcon())
		} else if resp.Status() != 200 {
			message := fmt.Sprintf("ListShows bad status: %d", resp.Status())
			log.Error(message)
			xbmc.Notify("Quasar", message, config.AddonIcon())
		}
	})
	if results != nil {
		for _, show := range results.Results {
			shows = append(shows, GetShow(show.Id, params["language"]))
		}
	}
	return shows
}

开发者ID:scakemyer，项目名称:quasar，代码行数:30，代码来源:show.go

示例3: ListShowsComplete

func ListShowsComplete(endpoint string, params napping.Params, page int) Shows {
	maxPages := MaxPages
	if page >= 0 {
		maxPages = 1
	}
	shows := make(Shows, maxPages*resultsPerPage)

	params["api_key"] = apiKey

	wg := sync.WaitGroup{}
	for i := 0; i < maxPages; i++ {
		wg.Add(1)
		currentpage := i
		startIndex := i * resultsPerPage
		if page >= 0 {
			currentpage = page
		}
		go func(page int) {
			defer wg.Done()
			var tmp *EntityList
			tmpParams := napping.Params{
				"page": strconv.Itoa(startPage + page),
			}
			for k, v := range params {
				tmpParams[k] = v
			}
			urlValues := tmpParams.AsUrlValues()
			rateLimiter.Call(func() {
				resp, err := napping.Get(
					tmdbEndpoint+endpoint,
					&urlValues,
					&tmp,
					nil,
				)
				if err != nil {
					log.Error(err.Error())
					xbmc.Notify("Quasar", "ListShows failed, check your logs.", config.AddonIcon())
				} else if resp.Status() != 200 {
					message := fmt.Sprintf("ListShows bad status: %d", resp.Status())
					xbmc.Notify("Quasar", message, config.AddonIcon())
				}
			})
			if tmp != nil {
				for i, entity := range tmp.Results {
					shows[startIndex+i] = GetShow(entity.Id, params["language"])
				}
			}
		}(currentpage)
	}
	wg.Wait()

	return shows
}

开发者ID:i96751414，项目名称:quasar，代码行数:53，代码来源:show.go

示例4: ListShowsComplete

func ListShowsComplete(endpoint string, params napping.Params, page int) Shows {
	MaxPages := popularMoviesMaxPages
	if page >= 0 {
		MaxPages = 1
	}
	shows := make(Shows, MaxPages*moviesPerPage)

	params["api_key"] = apiKey

	wg := sync.WaitGroup{}
	for i := 0; i < MaxPages; i++ {
		wg.Add(1)
		currentpage := i
		startMoviesIndex := i * moviesPerPage
		if page >= 0 {
			currentpage = page
		}
		go func(page int) {
			defer wg.Done()
			var tmp *EntityList
			tmpParams := napping.Params{
				"page": strconv.Itoa(popularMoviesStartPage + page),
			}
			for k, v := range params {
				tmpParams[k] = v
			}
			urlValues := tmpParams.AsUrlValues()
			rateLimiter.Call(func() {
				resp, err := napping.Get(
					tmdbEndpoint+endpoint,
					&urlValues,
					&tmp,
					nil,
				)
				if err != nil {
					panic(err)
				}
				if resp.Status() != 200 {
					panic(errors.New(fmt.Sprintf("Bad status: %d", resp.Status())))
				}
			})
			for i, entity := range tmp.Results {
				shows[startMoviesIndex+i] = GetShow(entity.Id, params["language"])
			}
		}(currentpage)
	}
	wg.Wait()

	return shows
}

开发者ID:felipejfc，项目名称:quasar，代码行数:50，代码来源:show.go

示例5: ListEntities

func ListEntities(endpoint string, params napping.Params) []*Entity {
	var wg sync.WaitGroup
	entities := make([]*Entity, MaxPages*resultsPerPage)
	params["api_key"] = apiKey
	params["language"] = "en"

	wg.Add(MaxPages)
	for i := 0; i < MaxPages; i++ {
		go func(page int) {
			defer wg.Done()
			var tmp *EntityList
			tmpParams := napping.Params{
				"page": strconv.Itoa(startPage + page),
			}
			for k, v := range params {
				tmpParams[k] = v
			}
			urlValues := tmpParams.AsUrlValues()
			rateLimiter.Call(func() {
				resp, err := napping.Get(
					tmdbEndpoint+endpoint,
					&urlValues,
					&tmp,
					nil,
				)
				if err != nil {
					log.Error(err.Error())
					xbmc.Notify("Quasar", "ListEntities failed, check your logs.", config.AddonIcon())
				} else if resp.Status() != 200 {
					message := fmt.Sprintf("ListEntities bad status: %d", resp.Status())
					log.Error(message)
					xbmc.Notify("Quasar", message, config.AddonIcon())
				}
			})
			for i, entity := range tmp.Results {
				entities[page*resultsPerPage+i] = entity
			}
		}(i)
	}
	wg.Wait()

	return entities
}

开发者ID:i96751414，项目名称:quasar，代码行数:43，代码来源:tmdb.go

示例6: ListMoviesComplete

func ListMoviesComplete(endpoint string, params napping.Params, page int) Movies {
	MaxPages := popularMoviesMaxPages
	if page >= 0 {
		MaxPages = 1
	}
	movies := make(Movies, MaxPages*moviesPerPage)
	params["api_key"] = apiKey

	wg := sync.WaitGroup{}
	for i := 0; i < MaxPages; i++ {
		wg.Add(1)
		currentpage := i
		startMoviesIndex := i * moviesPerPage
		if page >= 0 {
			currentpage = page
		}
		go func(page int) {
			defer wg.Done()
			var tmp *EntityList
			tmpParams := napping.Params{
				"page": strconv.Itoa(popularMoviesStartPage + page),
			}
			for k, v := range params {
				tmpParams[k] = v
			}
			urlValues := tmpParams.AsUrlValues()
			rateLimiter.Call(func() {
				napping.Get(
					tmdbEndpoint+endpoint,
					&urlValues,
					&tmp,
					nil,
				)
			})
			for i, movie := range tmp.Results {
				movies[startMoviesIndex+i] = GetMovie(movie.Id, params["language"])
			}
		}(currentpage)
	}
	wg.Wait()
	return movies
}

开发者ID:abuisine，项目名称:quasar，代码行数:42，代码来源:movie.go

示例7: ListEntities

func ListEntities(endpoint string, params napping.Params) []*Entity {
	var wg sync.WaitGroup
	entities := make([]*Entity, popularMoviesMaxPages*moviesPerPage)
	params["api_key"] = apiKey
	params["language"] = "en"

	wg.Add(popularMoviesMaxPages)
	for i := 0; i < popularMoviesMaxPages; i++ {
		go func(page int) {
			defer wg.Done()
			var tmp *EntityList
			tmpParams := napping.Params{
				"page": strconv.Itoa(popularMoviesStartPage + page),
			}
			for k, v := range params {
				tmpParams[k] = v
			}
			urlValues := tmpParams.AsUrlValues()
			rateLimiter.Call(func() {
				resp, err := napping.Get(
					tmdbEndpoint+endpoint,
					&urlValues,
					&tmp,
					nil,
				)
				if err != nil {
					panic(err)
				}
				if resp.Status() != 200 {
					panic(errors.New(fmt.Sprintf("Bad status: %d", resp.Status())))
				}
			})
			for i, entity := range tmp.Results {
				entities[page*moviesPerPage+i] = entity
			}
		}(i)
	}
	wg.Wait()

	return entities
}

开发者ID:felipejfc，项目名称:quasar，代码行数:41，代码来源:tmdb.go

注：本文中的github.com/jmcvetta/napping.Params类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。