Golang tcp.NewMux函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/influxdb/influxdb/tcp.NewMux函数的典型用法代码示例。如果您正苦于以下问题：Golang NewMux函数的具体用法？Golang NewMux怎么用？Golang NewMux使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NewMux函数的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: Open

// Open opens the store on a random TCP port.
func (s *Store) Open() error {

	addr := "127.0.0.1:0"
	if s.BindAddress != "" {
		addr = s.BindAddress
	}
	// Open a TCP port.
	ln, err := net.Listen("tcp", addr)
	if err != nil {
		return fmt.Errorf("listen: %s", err)
	}
	s.Addr = ln.Addr()
	s.Listener = ln
	s.RemoteAddr = s.Addr

	// Wrap listener in a muxer.
	mux := tcp.NewMux()
	s.RaftListener = mux.Listen(meta.MuxRaftHeader)
	s.ExecListener = mux.Listen(meta.MuxExecHeader)
	s.RPCListener = mux.Listen(meta.MuxRPCHeader)

	go mux.Serve(ln)

	// Open store.
	if err := s.Store.Open(); err != nil {
		return err
	}

	return nil
}

开发者ID:realgo，项目名称:telegraf，代码行数:31，代码来源:store_test.go

示例2: TestMux_Listen_ErrAlreadyRegistered

// Ensure two handlers cannot be registered for the same header byte.
func TestMux_Listen_ErrAlreadyRegistered(t *testing.T) {
	defer func() {
		if r := recover(); r != `listener already registered under header byte: 5` {
			t.Fatalf("unexpected recover: %#v", r)
		}
	}()

	// Register two listeners with the same header byte.
	mux := tcp.NewMux()
	mux.Listen(5)
	mux.Listen(5)
}

开发者ID:rhyolight，项目名称:influxdb，代码行数:13，代码来源:mux_test.go

示例3: newTestWriteService

func newTestWriteService(f func(shardID uint64, points []models.Point) error) testService {
	ln, err := net.Listen("tcp", "127.0.0.1:0")
	if err != nil {
		panic(err)
	}

	mux := tcp.NewMux()
	muxln := mux.Listen(cluster.MuxHeader)
	go mux.Serve(ln)

	return testService{
		writeShardFunc: f,
		ln:             ln,
		muxln:          muxln,
	}
}

开发者ID:rhyolight，项目名称:influxdb，代码行数:16，代码来源:service_test.go

示例4: newService

func newService(cfg *meta.Config) *testService {
	// Open shared TCP connection.
	ln, err := net.Listen("tcp", cfg.BindAddress)
	if err != nil {
		panic(err)
	}

	// Multiplex listener.
	mux := tcp.NewMux()

	s := meta.NewService(cfg)
	s.RaftListener = mux.Listen(meta.MuxHeader)

	go mux.Serve(ln)

	return &testService{Service: s, ln: ln}
}

开发者ID:methane，项目名称:influxdb，代码行数:17，代码来源:service_test.go

示例5: Open

// Open opens the store on a random TCP port.
func (s *Store) Open() error {
	// Open a TCP port.
	ln, err := net.Listen("tcp", "127.0.0.1:0")
	if err != nil {
		return fmt.Errorf("listen: %s", err)
	}
	s.Addr = ln.Addr()
	s.Listener = ln

	// Wrap listener in a muxer.
	mux := tcp.NewMux()
	s.RaftListener = mux.Listen(meta.MuxRaftHeader)
	s.ExecListener = mux.Listen(meta.MuxExecHeader)
	go mux.Serve(ln)

	// Open store.
	if err := s.Store.Open(); err != nil {
		return err
	}

	return nil
}

开发者ID:dahankzter，项目名称:influxdb，代码行数:23，代码来源:store_test.go

示例6: MustOpenService

// MustOpenService returns a new, opened service. Panic on error.
func MustOpenService() *Service {
	// Open randomly assigned port.
	ln, err := net.Listen("tcp", "127.0.0.1:0")
	if err != nil {
		panic(err)
	}

	// Start muxer.
	mux := tcp.NewMux()

	// Create new service and attach mux'd listener.
	s := NewService()
	s.ln = ln
	s.Listener = mux.Listen(copier.MuxHeader)
	go mux.Serve(ln)

	if err := s.Open(); err != nil {
		panic(err)
	}

	return s
}

开发者ID:nooproblem，项目名称:influxdb，代码行数:23，代码来源:service_test.go

示例7: Open

// Open opens the meta and data store and all services.
func (s *Server) Open() error {
	if err := func() error {
		// Start profiling, if set.
		startProfile(s.CPUProfile, s.MemProfile)

		host, port, err := s.hostAddr()
		if err != nil {
			return err
		}

		hostport := net.JoinHostPort(host, port)
		addr, err := net.ResolveTCPAddr("tcp", hostport)
		if err != nil {
			return fmt.Errorf("resolve tcp: addr=%s, err=%s", hostport, err)
		}
		s.MetaStore.Addr = addr
		s.MetaStore.RemoteAddr = &tcpaddr{hostport}

		// Open shared TCP connection.
		ln, err := net.Listen("tcp", s.BindAddress)
		if err != nil {
			return fmt.Errorf("listen: %s", err)
		}
		s.Listener = ln

		// The port 0 is used, we need to retrieve the port assigned by the kernel
		if strings.HasSuffix(s.BindAddress, ":0") {
			s.MetaStore.Addr = ln.Addr()
		}

		// Multiplex listener.
		mux := tcp.NewMux()
		s.MetaStore.RaftListener = mux.Listen(meta.MuxRaftHeader)
		s.MetaStore.ExecListener = mux.Listen(meta.MuxExecHeader)
		s.MetaStore.RPCListener = mux.Listen(meta.MuxRPCHeader)

		s.ClusterService.Listener = mux.Listen(cluster.MuxHeader)
		s.SnapshotterService.Listener = mux.Listen(snapshotter.MuxHeader)
		s.CopierService.Listener = mux.Listen(copier.MuxHeader)
		go mux.Serve(ln)

		// Open meta store.
		if err := s.MetaStore.Open(); err != nil {
			return fmt.Errorf("open meta store: %s", err)
		}
		go s.monitorErrorChan(s.MetaStore.Err())

		// Wait for the store to initialize.
		<-s.MetaStore.Ready()

		if err := s.Monitor.Open(); err != nil {
			return fmt.Errorf("open monitor: %v", err)
		}

		// Open TSDB store.
		if err := s.TSDBStore.Open(); err != nil {
			return fmt.Errorf("open tsdb store: %s", err)
		}

		// Open the hinted handoff service
		if err := s.HintedHandoff.Open(); err != nil {
			return fmt.Errorf("open hinted handoff: %s", err)
		}

		for _, service := range s.Services {
			if err := service.Open(); err != nil {
				return fmt.Errorf("open service: %s", err)
			}
		}

		// Start the reporting service, if not disabled.
		if !s.reportingDisabled {
			go s.startServerReporting()
		}

		return nil

	}(); err != nil {
		s.Close()
		return err
	}

	return nil
}

开发者ID:Tony133，项目名称:influxdb，代码行数:85，代码来源:server.go

示例8: Open

// Open opens the meta and data store and all services.
func (s *Server) Open() error {
	if err := func() error {
		// Start profiling, if set.
		startProfile(s.CPUProfile, s.MemProfile)

		// Resolve host to address.
		_, port, err := net.SplitHostPort(s.BindAddress)
		if err != nil {
			return fmt.Errorf("split bind address: %s", err)
		}
		hostport := net.JoinHostPort(s.Hostname, port)
		addr, err := net.ResolveTCPAddr("tcp", hostport)
		if err != nil {
			return fmt.Errorf("resolve tcp: addr=%s, err=%s", hostport, err)
		}
		s.MetaStore.Addr = addr

		// Open shared TCP connection.
		ln, err := net.Listen("tcp", s.BindAddress)
		if err != nil {
			return fmt.Errorf("listen: %s", err)
		}
		s.Listener = ln

		// Multiplex listener.
		mux := tcp.NewMux()
		s.MetaStore.RaftListener = mux.Listen(meta.MuxRaftHeader)
		s.MetaStore.ExecListener = mux.Listen(meta.MuxExecHeader)
		s.ClusterService.Listener = mux.Listen(cluster.MuxHeader)
		s.SnapshotterService.Listener = mux.Listen(snapshotter.MuxHeader)
		go mux.Serve(ln)

		// Open meta store.
		if err := s.MetaStore.Open(); err != nil {
			return fmt.Errorf("open meta store: %s", err)
		}
		go s.monitorErrorChan(s.MetaStore.Err())

		// Wait for the store to initialize.
		<-s.MetaStore.Ready()

		// Open TSDB store.
		if err := s.TSDBStore.Open(); err != nil {
			return fmt.Errorf("open tsdb store: %s", err)
		}

		// Open the hinted handoff service
		if err := s.HintedHandoff.Open(); err != nil {
			return fmt.Errorf("open hinted handoff: %s", err)
		}

		for _, service := range s.Services {
			if err := service.Open(); err != nil {
				return fmt.Errorf("open service: %s", err)
			}
		}

		// Start the reporting service, if not disabled.
		if !s.reportingDisabled {
			go s.startServerReporting()
		}

		return nil

	}(); err != nil {
		s.Close()
		return err
	}

	return nil
}

开发者ID:hypersleep，项目名称:influxdb，代码行数:72，代码来源:server.go

示例9: Open

// Open opens the meta and data store and all services.
func (s *Server) Open() error {
	// Start profiling, if set.
	startProfile(s.CPUProfile, s.MemProfile)

	// Open shared TCP connection.
	ln, err := net.Listen("tcp", s.BindAddress)
	if err != nil {
		return fmt.Errorf("listen: %s", err)
	}
	s.Listener = ln

	// Multiplex listener.
	mux := tcp.NewMux()
	go mux.Serve(ln)

	if s.MetaService != nil {
		s.MetaService.RaftListener = mux.Listen(meta.MuxHeader)
		// Open meta service.
		if err := s.MetaService.Open(); err != nil {
			return fmt.Errorf("open meta service: %s", err)
		}
		go s.monitorErrorChan(s.MetaService.Err())
	}

	// initialize MetaClient.
	if err = s.initializeMetaClient(); err != nil {
		return err
	}

	if s.TSDBStore != nil {
		// Append services.
		s.appendClusterService(s.config.Cluster)
		s.appendPrecreatorService(s.config.Precreator)
		s.appendSnapshotterService()
		s.appendCopierService()
		s.appendAdminService(s.config.Admin)
		s.appendContinuousQueryService(s.config.ContinuousQuery)
		s.appendHTTPDService(s.config.HTTPD)
		s.appendCollectdService(s.config.Collectd)
		if err := s.appendOpenTSDBService(s.config.OpenTSDB); err != nil {
			return err
		}
		for _, g := range s.config.UDPs {
			s.appendUDPService(g)
		}
		s.appendRetentionPolicyService(s.config.Retention)
		for _, g := range s.config.Graphites {
			if err := s.appendGraphiteService(g); err != nil {
				return err
			}
		}

		s.Subscriber.MetaClient = s.MetaClient
		s.ShardMapper.MetaClient = s.MetaClient
		s.QueryExecutor.MetaClient = s.MetaClient
		s.ShardWriter.MetaClient = s.MetaClient
		s.HintedHandoff.MetaClient = s.MetaClient
		s.Subscriber.MetaClient = s.MetaClient
		s.PointsWriter.MetaClient = s.MetaClient
		s.Monitor.MetaClient = s.MetaClient

		s.ClusterService.Listener = mux.Listen(cluster.MuxHeader)
		s.SnapshotterService.Listener = mux.Listen(snapshotter.MuxHeader)
		s.CopierService.Listener = mux.Listen(copier.MuxHeader)

		// Open TSDB store.
		if err := s.TSDBStore.Open(); err != nil {
			return fmt.Errorf("open tsdb store: %s", err)
		}

		// Open the hinted handoff service
		if err := s.HintedHandoff.Open(); err != nil {
			return fmt.Errorf("open hinted handoff: %s", err)
		}

		// Open the subcriber service
		if err := s.Subscriber.Open(); err != nil {
			return fmt.Errorf("open subscriber: %s", err)
		}

		// Open the points writer service
		if err := s.PointsWriter.Open(); err != nil {
			return fmt.Errorf("open points writer: %s", err)
		}

		// Open the monitor service
		if err := s.Monitor.Open(); err != nil {
			return fmt.Errorf("open monitor: %v", err)
		}

		for _, service := range s.Services {
			if err := service.Open(); err != nil {
				return fmt.Errorf("open service: %s", err)
			}
		}
	}

	// Start the reporting service, if not disabled.
	if !s.reportingDisabled {
//.........这里部分代码省略.........

开发者ID:methane，项目名称:influxdb，代码行数:101，代码来源:server.go

示例10: TestMux

// Ensure the muxer can split a listener's connections across multiple listeners.
func TestMux(t *testing.T) {
	if err := quick.Check(func(n uint8, msg []byte) bool {
		if testing.Verbose() {
			if len(msg) == 0 {
				log.Printf("n=%d, <no message>", n)
			} else {
				log.Printf("n=%d, hdr=%d, len=%d", n, msg[0], len(msg))
			}
		}

		var wg sync.WaitGroup

		// Open single listener on random port.
		tcpListener, err := net.Listen("tcp", "127.0.0.1:0")
		if err != nil {
			t.Fatal(err)
		}
		defer tcpListener.Close()

		// Setup muxer & listeners.
		mux := tcp.NewMux()
		mux.Timeout = 200 * time.Millisecond
		if !testing.Verbose() {
			mux.Logger = log.New(ioutil.Discard, "", 0)
		}
		for i := uint8(0); i < n; i++ {
			ln := mux.Listen(byte(i))

			wg.Add(1)
			go func(i uint8, ln net.Listener) {
				defer wg.Done()

				// Wait for a connection for this listener.
				conn, err := ln.Accept()
				if conn != nil {
					defer conn.Close()
				}

				// If there is no message or the header byte
				// doesn't match then expect close.
				if len(msg) == 0 || msg[0] != byte(i) {
					if err == nil || err.Error() != "network connection closed" {
						t.Fatalf("unexpected error: %s", err)
					}
					return
				}

				// If the header byte matches this listener
				// then expect a connection and read the message.
				var buf bytes.Buffer
				if _, err := io.CopyN(&buf, conn, int64(len(msg)-1)); err != nil {
					t.Fatal(err)
				} else if !bytes.Equal(msg[1:], buf.Bytes()) {
					t.Fatalf("message mismatch:\n\nexp=%x\n\ngot=%x\n\n", msg[1:], buf.Bytes())
				}

				// Write response.
				if _, err := conn.Write([]byte("OK")); err != nil {
					t.Fatal(err)
				}
			}(i, ln)
		}

		// Begin serving from the listener.
		go mux.Serve(tcpListener)

		// Write message to TCP listener and read OK response.
		conn, err := net.Dial("tcp", tcpListener.Addr().String())
		if err != nil {
			t.Fatal(err)
		} else if _, err = conn.Write(msg); err != nil {
			t.Fatal(err)
		}

		// Read the response into the buffer.
		var resp [2]byte
		_, err = io.ReadFull(conn, resp[:])

		// If the message header is less than n then expect a response.
		// Otherwise we should get an EOF because the mux closed.
		if len(msg) > 0 && uint8(msg[0]) < n {
			if string(resp[:]) != `OK` {
				t.Fatalf("unexpected response: %s", resp[:])
			}
		} else {
			if err == nil || (err != io.EOF && !(strings.Contains(err.Error(), "connection reset by peer") ||
				strings.Contains(err.Error(), "closed by the remote host"))) {
				t.Fatalf("unexpected error: %s", err)
			}
		}

		// Close connection.
		if err := conn.Close(); err != nil {
			t.Fatal(err)
		}

		// Close original TCP listener and wait for all goroutines to close.
		tcpListener.Close()
		wg.Wait()
//.........这里部分代码省略.........

开发者ID:rhyolight，项目名称:influxdb，代码行数:101，代码来源:mux_test.go

注：本文中的github.com/influxdb/influxdb/tcp.NewMux函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。