Golang structs.Decode函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/hashicorp/consul/consul/structs.Decode函数的典型用法代码示例。如果您正苦于以下问题：Golang Decode函数的具体用法？Golang Decode怎么用？Golang Decode使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Decode函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: decodeRegister

func (c *consulFSM) decodeRegister(buf []byte, index uint64) interface{} {
	var req structs.RegisterRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}
	return c.applyRegister(&req, index)
}

开发者ID:askagirl，项目名称:consul，代码行数:7，代码来源:fsm.go

示例2: applyDeregister

func (c *consulFSM) applyDeregister(buf []byte, index uint64) interface{} {
	var req structs.DeregisterRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}

	// Either remove the service entry or the whole node
	if req.ServiceID != "" {
		if err := c.state.DeleteNodeService(index, req.Node, req.ServiceID); err != nil {
			c.logger.Printf("[INFO] consul.fsm: DeleteNodeService failed: %v", err)
			return err
		}
	} else if req.CheckID != "" {
		if err := c.state.DeleteNodeCheck(index, req.Node, req.CheckID); err != nil {
			c.logger.Printf("[INFO] consul.fsm: DeleteNodeCheck failed: %v", err)
			return err
		}
	} else {
		if err := c.state.DeleteNode(index, req.Node); err != nil {
			c.logger.Printf("[INFO] consul.fsm: DeleteNode failed: %v", err)
			return err
		}
	}
	return nil
}

开发者ID:askagirl，项目名称:consul，代码行数:25，代码来源:fsm.go

示例3: applyDeregister

func (c *consulFSM) applyDeregister(buf []byte, index uint64) interface{} {
	defer metrics.MeasureSince([]string{"consul", "fsm", "deregister"}, time.Now())
	var req structs.DeregisterRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}

	// Either remove the service entry or the whole node. The precedence
	// here is also baked into vetDeregisterWithACL() in acl.go, so if you
	// make changes here, be sure to also adjust the code over there.
	if req.ServiceID != "" {
		if err := c.state.DeleteService(index, req.Node, req.ServiceID); err != nil {
			c.logger.Printf("[INFO] consul.fsm: DeleteNodeService failed: %v", err)
			return err
		}
	} else if req.CheckID != "" {
		if err := c.state.DeleteCheck(index, req.Node, req.CheckID); err != nil {
			c.logger.Printf("[INFO] consul.fsm: DeleteNodeCheck failed: %v", err)
			return err
		}
	} else {
		if err := c.state.DeleteNode(index, req.Node); err != nil {
			c.logger.Printf("[INFO] consul.fsm: DeleteNode failed: %v", err)
			return err
		}
	}
	return nil
}

开发者ID:hashicorp，项目名称:consul，代码行数:28，代码来源:fsm.go

示例4: applyACLOperation

func (c *consulFSM) applyACLOperation(buf []byte, index uint64) interface{} {
	var req structs.ACLRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}
	switch req.Op {
	case structs.ACLSet:
		if err := c.state.ACLSet(index, &req.ACL, false); err != nil {
			return err
		} else {
			return req.ACL.ID
		}
	case structs.ACLForceSet:
		if err := c.state.ACLSet(index, &req.ACL, true); err != nil {
			return err
		} else {
			return req.ACL.ID
		}
	case structs.ACLDelete:
		return c.state.ACLDelete(index, req.ACL.ID)
	default:
		c.logger.Printf("[WARN] consul.fsm: Invalid ACL operation '%s'", req.Op)
		return fmt.Errorf("Invalid ACL operation '%s'", req.Op)
	}
	return nil
}

开发者ID:askagirl，项目名称:consul，代码行数:26，代码来源:fsm.go

示例5: applyKVSOperation

func (c *consulFSM) applyKVSOperation(buf []byte, index uint64) interface{} {
	var req structs.KVSRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}
	switch req.Op {
	case structs.KVSSet:
		return c.state.KVSSet(index, &req.DirEnt)
	case structs.KVSDelete:
		return c.state.KVSDelete(index, req.DirEnt.Key)
	case structs.KVSDeleteTree:
		return c.state.KVSDeleteTree(index, req.DirEnt.Key)
	case structs.KVSCAS:
		act, err := c.state.KVSCheckAndSet(index, &req.DirEnt)
		if err != nil {
			return err
		} else {
			return act
		}
	default:
		c.logger.Printf("[WARN] consul.fsm: Invalid KVS operation '%s'", req.Op)
		return fmt.Errorf("Invalid KVS operation '%s'", req.Op)
	}
	return nil
}

开发者ID:rayleyva，项目名称:consul，代码行数:25，代码来源:fsm.go

示例6: applyTxn

func (c *consulFSM) applyTxn(buf []byte, index uint64) interface{} {
	var req structs.TxnRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}
	defer metrics.MeasureSince([]string{"consul", "fsm", "txn"}, time.Now())
	results, errors := c.state.TxnRW(index, req.Ops)
	return structs.TxnResponse{results, errors}
}

开发者ID:catroot，项目名称:consul，代码行数:9，代码来源:fsm.go

示例7: applyCoordinateBatchUpdate

// applyCoordinateBatchUpdate processes a batch of coordinate updates and applies
// them in a single underlying transaction. This interface isn't 1:1 with the outer
// update interface that the coordinate endpoint exposes, so we made it single
// purpose and avoided the opcode convention.
func (c *consulFSM) applyCoordinateBatchUpdate(buf []byte, index uint64) interface{} {
	var updates structs.Coordinates
	if err := structs.Decode(buf, &updates); err != nil {
		panic(fmt.Errorf("failed to decode batch updates: %v", err))
	}
	defer metrics.MeasureSince([]string{"consul", "fsm", "coordinate", "batch-update"}, time.Now())
	if err := c.state.CoordinateBatchUpdate(index, updates); err != nil {
		return err
	}
	return nil
}

开发者ID:catroot，项目名称:consul，代码行数:15，代码来源:fsm.go

示例8: applyTombstoneOperation

func (c *consulFSM) applyTombstoneOperation(buf []byte, index uint64) interface{} {
	var req structs.TombstoneRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}
	defer metrics.MeasureSince([]string{"consul", "fsm", "tombstone", string(req.Op)}, time.Now())
	switch req.Op {
	case structs.TombstoneReap:
		return c.state.ReapTombstones(req.ReapIndex)
	default:
		c.logger.Printf("[WARN] consul.fsm: Invalid Tombstone operation '%s'", req.Op)
		return fmt.Errorf("Invalid Tombstone operation '%s'", req.Op)
	}
}

开发者ID:catroot，项目名称:consul，代码行数:14，代码来源:fsm.go

示例9: applyRegister

func (c *consulFSM) applyRegister(buf []byte, index uint64) interface{} {
	defer metrics.MeasureSince([]string{"consul", "fsm", "register"}, time.Now())
	var req structs.RegisterRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}

	// Apply all updates in a single transaction
	if err := c.state.EnsureRegistration(index, &req); err != nil {
		c.logger.Printf("[INFO] consul.fsm: EnsureRegistration failed: %v", err)
		return err
	}
	return nil
}

开发者ID:catroot，项目名称:consul，代码行数:14，代码来源:fsm.go

示例10: applyKVSOperation

func (c *consulFSM) applyKVSOperation(buf []byte, index uint64) interface{} {
	var req structs.KVSRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}
	defer metrics.MeasureSince([]string{"consul", "fsm", "kvs", string(req.Op)}, time.Now())
	switch req.Op {
	case structs.KVSSet:
		return c.state.KVSSet(index, &req.DirEnt)
	case structs.KVSDelete:
		return c.state.KVSDelete(index, req.DirEnt.Key)
	case structs.KVSDeleteCAS:
		act, err := c.state.KVSDeleteCAS(index, req.DirEnt.ModifyIndex, req.DirEnt.Key)
		if err != nil {
			return err
		} else {
			return act
		}
	case structs.KVSDeleteTree:
		return c.state.KVSDeleteTree(index, req.DirEnt.Key)
	case structs.KVSCAS:
		act, err := c.state.KVSSetCAS(index, &req.DirEnt)
		if err != nil {
			return err
		} else {
			return act
		}
	case structs.KVSLock:
		act, err := c.state.KVSLock(index, &req.DirEnt)
		if err != nil {
			return err
		} else {
			return act
		}
	case structs.KVSUnlock:
		act, err := c.state.KVSUnlock(index, &req.DirEnt)
		if err != nil {
			return err
		} else {
			return act
		}
	default:
		err := errors.New(fmt.Sprintf("Invalid KVS operation '%s'", req.Op))
		c.logger.Printf("[WARN] consul.fsm: %v", err)
		return err
	}
}

开发者ID:catroot，项目名称:consul，代码行数:47，代码来源:fsm.go

示例11: applyPreparedQueryOperation

// applyPreparedQueryOperation applies the given prepared query operation to the
// state store.
func (c *consulFSM) applyPreparedQueryOperation(buf []byte, index uint64) interface{} {
	var req structs.PreparedQueryRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}

	defer metrics.MeasureSince([]string{"consul", "fsm", "prepared-query", string(req.Op)}, time.Now())
	switch req.Op {
	case structs.PreparedQueryCreate, structs.PreparedQueryUpdate:
		return c.state.PreparedQuerySet(index, req.Query)
	case structs.PreparedQueryDelete:
		return c.state.PreparedQueryDelete(index, req.Query.ID)
	default:
		c.logger.Printf("[WARN] consul.fsm: Invalid PreparedQuery operation '%s'", req.Op)
		return fmt.Errorf("Invalid PreparedQuery operation '%s'", req.Op)
	}
}

开发者ID:catroot，项目名称:consul，代码行数:19，代码来源:fsm.go

示例12: applySessionOperation

func (c *consulFSM) applySessionOperation(buf []byte, index uint64) interface{} {
	var req structs.SessionRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}
	switch req.Op {
	case structs.SessionCreate:
		if err := c.state.SessionCreate(index, &req.Session); err != nil {
			return err
		} else {
			return req.Session.ID
		}
	case structs.SessionDestroy:
		return c.state.SessionDestroy(index, req.Session.ID)
	default:
		c.logger.Printf("[WARN] consul.fsm: Invalid Session operation '%s'", req.Op)
		return fmt.Errorf("Invalid Session operation '%s'", req.Op)
	}
	return nil
}

开发者ID:askagirl，项目名称:consul，代码行数:20，代码来源:fsm.go

示例13: applyACLOperation

func (c *consulFSM) applyACLOperation(buf []byte, index uint64) interface{} {
	var req structs.ACLRequest
	if err := structs.Decode(buf, &req); err != nil {
		panic(fmt.Errorf("failed to decode request: %v", err))
	}
	defer metrics.MeasureSince([]string{"consul", "fsm", "acl", string(req.Op)}, time.Now())
	switch req.Op {
	case structs.ACLForceSet, structs.ACLSet:
		if err := c.state.ACLSet(index, &req.ACL); err != nil {
			return err
		} else {
			return req.ACL.ID
		}
	case structs.ACLDelete:
		return c.state.ACLDelete(index, req.ACL.ID)
	default:
		c.logger.Printf("[WARN] consul.fsm: Invalid ACL operation '%s'", req.Op)
		return fmt.Errorf("Invalid ACL operation '%s'", req.Op)
	}
}

开发者ID:catroot，项目名称:consul，代码行数:20，代码来源:fsm.go

示例14: decode

func decode(buf []byte, out interface{}) {
	if err := structs.Decode(buf, out); err != nil {
		kingpin.Errorf("Error while decoding message: %s\n", err.Error())
	}
}

开发者ID:outbrain，项目名称:consul-raftdb-reader，代码行数:5，代码来源:main.go

示例15: initialize

// initialize is used to setup the store for use
func (s *StateStore) initialize() error {
	// Setup the Env first
	if err := s.env.SetMaxDBs(mdb.DBI(32)); err != nil {
		return err
	}

	// Set the maximum db size based on 32/64bit. Since we are
	// doing an mmap underneath, we need to limit our use of virtual
	// address space on 32bit, but don't have to care on 64bit.
	dbSize := dbMaxMapSize32bit
	if runtime.GOARCH == "amd64" {
		dbSize = dbMaxMapSize64bit
	}

	// Increase the maximum map size
	if err := s.env.SetMapSize(dbSize); err != nil {
		return err
	}

	// Optimize our flags for speed over safety, since the Raft log + snapshots
	// are durable. We treat this as an ephemeral in-memory DB, since we nuke
	// the data anyways.
	var flags uint = mdb.NOMETASYNC | mdb.NOSYNC | mdb.NOTLS
	if err := s.env.Open(s.path, flags, 0755); err != nil {
		return err
	}

	// Tables use a generic struct encoder
	encoder := func(obj interface{}) []byte {
		buf, err := structs.Encode(255, obj)
		if err != nil {
			panic(err)
		}
		return buf[1:]
	}

	// Setup our tables
	s.nodeTable = &MDBTable{
		Name: dbNodes,
		Indexes: map[string]*MDBIndex{
			"id": &MDBIndex{
				Unique: true,
				Fields: []string{"Node"},
			},
		},
		Decoder: func(buf []byte) interface{} {
			out := new(structs.Node)
			if err := structs.Decode(buf, out); err != nil {
				panic(err)
			}
			return out
		},
	}

	s.serviceTable = &MDBTable{
		Name: dbServices,
		Indexes: map[string]*MDBIndex{
			"id": &MDBIndex{
				Unique: true,
				Fields: []string{"Node", "ServiceID"},
			},
			"service": &MDBIndex{
				AllowBlank: true,
				Fields:     []string{"ServiceName"},
			},
		},
		Decoder: func(buf []byte) interface{} {
			out := new(structs.ServiceNode)
			if err := structs.Decode(buf, out); err != nil {
				panic(err)
			}
			return out
		},
	}

	s.checkTable = &MDBTable{
		Name: dbChecks,
		Indexes: map[string]*MDBIndex{
			"id": &MDBIndex{
				Unique: true,
				Fields: []string{"Node", "CheckID"},
			},
			"status": &MDBIndex{
				Fields: []string{"Status"},
			},
			"service": &MDBIndex{
				AllowBlank: true,
				Fields:     []string{"ServiceName"},
			},
			"node": &MDBIndex{
				AllowBlank: true,
				Fields:     []string{"Node", "ServiceID"},
			},
		},
		Decoder: func(buf []byte) interface{} {
			out := new(structs.HealthCheck)
			if err := structs.Decode(buf, out); err != nil {
				panic(err)
			}
//.........这里部分代码省略.........

开发者ID:kernelbitch，项目名称:consul，代码行数:101，代码来源:state_store.go

注：本文中的github.com/hashicorp/consul/consul/structs.Decode函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。