func (s *statusManager) SetPodStatus(pod *api.Pod, status api.PodStatus) {
	podFullName := kubecontainer.GetPodFullName(pod)
	s.podStatusesLock.Lock()
	defer s.podStatusesLock.Unlock()
	oldStatus, found := s.podStatuses[podFullName]

	// ensure that the start time does not change across updates.
	if found && oldStatus.StartTime != nil {
		status.StartTime = oldStatus.StartTime
	}

	// if the status has no start time, we need to set an initial time
	// TODO(yujuhong): Consider setting StartTime when generating the pod
	// status instead, which would allow statusManager to become a simple cache
	// again.
	if status.StartTime.IsZero() {
		if pod.Status.StartTime.IsZero() {
			// the pod did not have a previously recorded value so set to now
			now := util.Now()
			status.StartTime = &now
		} else {
			// the pod had a recorded value, but the kubelet restarted so we need to rebuild cache
			// based on last observed value
			status.StartTime = pod.Status.StartTime
		}
	}

	if !found || !reflect.DeepEqual(oldStatus, status) {
		s.podStatuses[podFullName] = status
		s.podStatusChannel <- podStatusSyncRequest{pod, status}
	} else {
		glog.V(3).Infof("Ignoring same pod status for %s - old: %s new: %s", podFullName, oldStatus, status)
	}
}

// toPodStatus converts a podInfo type into an api.PodStatus type.
func (p *podInfo) toPodStatus(pod *kubecontainer.Pod) api.PodStatus {
	var status api.PodStatus
	status.PodIP = p.ip
	// For now just make every container's state the same as the pod.
	for _, container := range pod.Containers {
		status.ContainerStatuses = append(status.ContainerStatuses, p.getContainerStatus(container))
	}
	return status
}

// GetPodStatus returns information from Docker about the containers in a pod
func (kl *Kubelet) GetPodStatus(podFullName string, uid types.UID) (api.PodStatus, error) {
	var manifest api.PodSpec
	for _, pod := range kl.pods {
		if GetPodFullName(&pod) == podFullName {
			manifest = pod.Spec
			break
		}
	}

	info, err := dockertools.GetDockerPodInfo(kl.dockerClient, manifest, podFullName, uid)

	// TODO(dchen1107): Determine PodPhase here
	var podStatus api.PodStatus
	podStatus.Info = info

	return podStatus, err
}

func (s *statusManager) SetPodStatus(pod *api.Pod, status api.PodStatus) {
	podFullName := kubecontainer.GetPodFullName(pod)
	s.podStatusesLock.Lock()
	defer s.podStatusesLock.Unlock()
	oldStatus, found := s.podStatuses[podFullName]

	// ensure that the start time does not change across updates.
	if found && oldStatus.StartTime != nil {
		status.StartTime = oldStatus.StartTime
	}

	// if the status has no start time, we need to set an initial time
	// TODO(yujuhong): Consider setting StartTime when generating the pod
	// status instead, which would allow statusManager to become a simple cache
	// again.
	if status.StartTime.IsZero() {
		if pod.Status.StartTime.IsZero() {
			// the pod did not have a previously recorded value so set to now
			now := util.Now()
			status.StartTime = &now
		} else {
			// the pod had a recorded value, but the kubelet restarted so we need to rebuild cache
			// based on last observed value
			status.StartTime = pod.Status.StartTime
		}
	}

	// TODO: Holding a lock during blocking operations is dangerous. Refactor so this isn't necessary.
	// The intent here is to prevent concurrent updates to a pod's status from
	// clobbering each other so the phase of a pod progresses monotonically.
	// Currently this routine is not called for the same pod from multiple
	// workers and/or the kubelet but dropping the lock before sending the
	// status down the channel feels like an easy way to get a bullet in foot.
	if !found || !isStatusEqual(&oldStatus, &status) {
		s.podStatuses[podFullName] = status
		s.podStatusChannel <- podStatusSyncRequest{pod, status}
	} else {
		glog.V(3).Infof("Ignoring same pod status for %s - old: %s new: %s", podFullName, oldStatus, status)
	}
}

func (kl *Kubelet) syncPod(pod *api.BoundPod, dockerContainers dockertools.DockerContainers) error {
	podFullName := GetPodFullName(pod)
	uuid := pod.UID
	containersToKeep := make(map[dockertools.DockerID]empty)
	killedContainers := make(map[dockertools.DockerID]empty)
	glog.V(4).Infof("Syncing Pod, podFullName: %q, uuid: %q", podFullName, uuid)

	// Make sure we have a network container
	var netID dockertools.DockerID
	if netDockerContainer, found, _ := dockerContainers.FindPodContainer(podFullName, uuid, networkContainerName); found {
		netID = dockertools.DockerID(netDockerContainer.ID)
	} else {
		glog.V(2).Infof("Network container doesn't exist for pod %q, killing and re-creating the pod", podFullName)
		count, err := kl.killContainersInPod(pod, dockerContainers)
		if err != nil {
			return err
		}
		netID, err = kl.createNetworkContainer(pod)
		if err != nil {
			glog.Errorf("Failed to introspect network container: %v; Skipping pod %q", err, podFullName)
			return err
		}
		if count > 0 {
			// Re-list everything, otherwise we'll think we're ok.
			dockerContainers, err = dockertools.GetKubeletDockerContainers(kl.dockerClient, false)
			if err != nil {
				glog.Errorf("Error listing containers %#v", dockerContainers)
				return err
			}
		}
	}
	containersToKeep[netID] = empty{}

	podVolumes, err := kl.mountExternalVolumes(pod)
	if err != nil {
		glog.Errorf("Unable to mount volumes for pod %q: %v; skipping pod", podFullName, err)
		return err
	}

	podStatus := api.PodStatus{}
	info, err := kl.GetPodInfo(podFullName, uuid)
	if err != nil {
		glog.Errorf("Unable to get pod with name %q and uuid %q info, health checks may be invalid", podFullName, uuid)
	}
	netInfo, found := info[networkContainerName]
	if found {
		podStatus.PodIP = netInfo.PodIP
	}

	for _, container := range pod.Spec.Containers {
		expectedHash := dockertools.HashContainer(&container)
		if dockerContainer, found, hash := dockerContainers.FindPodContainer(podFullName, uuid, container.Name); found {
			containerID := dockertools.DockerID(dockerContainer.ID)
			glog.V(3).Infof("pod %q container %q exists as %v", podFullName, container.Name, containerID)

			// look for changes in the container.
			if hash == 0 || hash == expectedHash {
				// TODO: This should probably be separated out into a separate goroutine.
				healthy, err := kl.healthy(podFullName, uuid, podStatus, container, dockerContainer)
				if err != nil {
					glog.V(1).Infof("health check errored: %v", err)
					containersToKeep[containerID] = empty{}
					continue
				}
				if healthy == health.Healthy {
					containersToKeep[containerID] = empty{}
					continue
				}
				glog.V(1).Infof("pod %q container %q is unhealthy. Container will be killed and re-created.", podFullName, container.Name, healthy)
			} else {
				glog.V(1).Infof("pod %q container %q hash changed (%d vs %d). Container will be killed and re-created.", podFullName, container.Name, hash, expectedHash)
			}
			if err := kl.killContainer(dockerContainer); err != nil {
				glog.V(1).Infof("Failed to kill container %q: %v", dockerContainer.ID, err)
				continue
			}
			killedContainers[containerID] = empty{}

			// Also kill associated network container
			if netContainer, found, _ := dockerContainers.FindPodContainer(podFullName, uuid, networkContainerName); found {
				if err := kl.killContainer(netContainer); err != nil {
					glog.V(1).Infof("Failed to kill network container %q: %v", netContainer.ID, err)
					continue
				}
			}
		}

		// Check RestartPolicy for container
		recentContainers, err := dockertools.GetRecentDockerContainersWithNameAndUUID(kl.dockerClient, podFullName, uuid, container.Name)
		if err != nil {
			glog.Errorf("Error listing recent containers with name and uuid:%s--%s--%s", podFullName, uuid, container.Name)
			// TODO(dawnchen): error handling here?
		}

		if len(recentContainers) > 0 && pod.Spec.RestartPolicy.Always == nil {
			if pod.Spec.RestartPolicy.Never != nil {
				glog.V(3).Infof("Already ran container with name %s--%s--%s, do nothing",
					podFullName, uuid, container.Name)
				continue
			}
//.........这里部分代码省略.........

// GetPodStatus returns docker related status for all containers in the pod as
// well as the infrastructure container.
func (dm *DockerManager) GetPodStatus(pod *api.Pod) (*api.PodStatus, error) {
	podFullName := kubecontainer.GetPodFullName(pod)
	uid := pod.UID
	manifest := pod.Spec

	oldStatuses := make(map[string]api.ContainerStatus, len(pod.Spec.Containers))
	lastObservedTime := make(map[string]util.Time, len(pod.Spec.Containers))
	for _, status := range pod.Status.ContainerStatuses {
		oldStatuses[status.Name] = status
		if status.LastTerminationState.Termination != nil {
			lastObservedTime[status.Name] = status.LastTerminationState.Termination.FinishedAt
		}
	}

	var podStatus api.PodStatus
	statuses := make(map[string]*api.ContainerStatus, len(pod.Spec.Containers))

	expectedContainers := make(map[string]api.Container)
	for _, container := range manifest.Containers {
		expectedContainers[container.Name] = container
	}
	expectedContainers[PodInfraContainerName] = api.Container{}

	containers, err := dm.client.ListContainers(docker.ListContainersOptions{All: true})
	if err != nil {
		return nil, err
	}

	containerDone := util.NewStringSet()
	// Loop through list of running and exited docker containers to construct
	// the statuses. We assume docker returns a list of containers sorted in
	// reverse by time.
	for _, value := range containers {
		if len(value.Names) == 0 {
			continue
		}
		dockerName, _, err := ParseDockerName(value.Names[0])
		if err != nil {
			continue
		}
		if dockerName.PodFullName != podFullName {
			continue
		}
		if uid != "" && dockerName.PodUID != uid {
			continue
		}
		dockerContainerName := dockerName.ContainerName
		c, found := expectedContainers[dockerContainerName]
		if !found {
			continue
		}
		terminationMessagePath := c.TerminationMessagePath
		if containerDone.Has(dockerContainerName) {
			continue
		}

		var terminationState *api.ContainerState = nil
		// Inspect the container.
		result := dm.inspectContainer(value.ID, dockerContainerName, terminationMessagePath)
		if result.err != nil {
			return nil, result.err
		} else if result.status.State.Termination != nil {
			terminationState = &result.status.State
		}

		if containerStatus, found := statuses[dockerContainerName]; found {
			if containerStatus.LastTerminationState.Termination == nil && terminationState != nil {
				// Populate the last termination state.
				containerStatus.LastTerminationState = *terminationState
			}
			count := true
			// Only count dead containers terminated after last time we observed,
			if lastObservedTime, ok := lastObservedTime[dockerContainerName]; ok {
				if terminationState != nil && terminationState.Termination.FinishedAt.After(lastObservedTime.Time) {
					count = false
				} else {
					// The container finished before the last observation. No
					// need to examine/count the older containers. Mark the
					// container name as done.
					containerDone.Insert(dockerContainerName)
				}
			}
			if count {
				containerStatus.RestartCount += 1
			}
			continue
		}

		if dockerContainerName == PodInfraContainerName {
			// Found network container
			if result.status.State.Running != nil {
				podStatus.PodIP = result.ip
			}
		} else {
			// Add user container information.
			if oldStatus, found := oldStatuses[dockerContainerName]; found {
				// Use the last observed restart count if it's available.
				result.status.RestartCount = oldStatus.RestartCount
//.........这里部分代码省略.........