本文整理汇总了Golang中github.com/google/seesaw/common/seesaw.IP类的典型用法代码示例。如果您正苦于以下问题:Golang IP类的具体用法?Golang IP怎么用?Golang IP使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了IP类的5个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。
示例1: down
// down takes down an IP address for a vserver, then takes down all services
// for that IP address.
func (v *vserver) down(ip seesaw.IP) {
ncc := v.engine.ncc
if err := ncc.Dial(); err != nil {
log.Fatalf("%v: failed to connect to NCC: %v", v, err)
}
defer ncc.Close()
// If this is an anycast VIP, withdraw the BGP route.
nip := ip.IP()
if seesaw.IsAnycast(nip) {
if v.engine.config.AnycastEnabled {
log.Infof("%v: withdrawing BGP route for %v", v, ip)
if err := ncc.BGPWithdrawVIP(nip); err != nil {
log.Fatalf("%v: failed to withdraw VIP %v: %v", v, ip, err)
}
}
vip := seesaw.NewVIP(nip, nil)
if err := v.engine.lbInterface.DeleteVIP(vip); err != nil {
log.Fatalf("%v: failed to remove VIP %v: %v", v, ip, err)
}
if err := v.engine.lbInterface.DeleteVserver(v.lbVservers[ip], ip.AF()); err != nil {
log.Fatalf("%v: failed to delete Vserver: %v", v, err)
}
}
// TODO(jsing): Should we delay while the BGP routes propagate?
delete(v.active, ip)
v.updateServices(ip)
log.Infof("%v: VIP %v down", v, ip)
}
开发者ID:bluemutedwisdom,项目名称:seesaw,代码行数:32,代码来源:vserver.go
示例2: updateState
// updateState updates the state of an IP for a vserver based on the state of
// that IP's services.
func (v *vserver) updateState(ip seesaw.IP) {
// A vserver anycast IP is healthy if *all* services for that IP are healthy.
// A vserver unicast IP is healthy if *any* services for that IP are healthy.
var healthy bool
for _, s := range v.services {
if !s.ip.Equal(ip) {
continue
}
healthy = s.healthy
if !healthy && seesaw.IsAnycast(ip.IP()) {
break
}
if healthy && !seesaw.IsAnycast(ip.IP()) {
break
}
}
if v.active[ip] == healthy {
v.updateServices(ip)
return
}
switch {
case !healthy && v.active[ip]:
v.down(ip)
case healthy && !v.active[ip]:
v.up(ip)
}
}
开发者ID:bluemutedwisdom,项目名称:seesaw,代码行数:30,代码来源:vserver.go
示例3: markBackend
// markBackend returns a mark for the specified backend and sets up the IPVS
// service entry if it does not exist.
func (h *healthcheckManager) markBackend(backend seesaw.IP) uint32 {
mark, ok := h.marks[backend]
if ok {
return mark
}
mark, err := h.markAlloc.get()
if err != nil {
log.Fatalf("Failed to get mark: %v", err)
}
h.marks[backend] = mark
ip := net.IPv6zero
if backend.AF() == seesaw.IPv4 {
ip = net.IPv4zero
}
ipvsSvc := &ipvs.Service{
Address: ip,
Protocol: ipvs.IPProto(0),
Port: 0,
Scheduler: "rr",
FirewallMark: mark,
Destinations: []*ipvs.Destination{
{
Address: backend.IP(),
Port: 0,
Weight: 1,
Flags: ipvs.DFForwardRoute,
},
},
}
if err := h.ncc.Dial(); err != nil {
log.Fatalf("Failed to connect to NCC: %v", err)
}
defer h.ncc.Close()
log.Infof("Adding DSR IPVS service for %s (mark %d)", backend, mark)
if err := h.ncc.IPVSAddService(ipvsSvc); err != nil {
log.Fatalf("Failed to add IPVS service for DSR: %v", err)
}
return mark
}
开发者ID:Cepave,项目名称:lvs-metrics,代码行数:47,代码来源:healthcheck.go
示例4: up
// up brings up all healthy services for an IP address for a vserver, then
// brings up the IP address.
func (v *vserver) up(ip seesaw.IP) {
ncc := v.engine.ncc
if err := ncc.Dial(); err != nil {
log.Fatalf("%v: failed to connect to NCC: %v", v, err)
}
defer ncc.Close()
v.active[ip] = true
v.updateServices(ip)
// If this is an anycast VIP, start advertising a BGP route.
nip := ip.IP()
if seesaw.IsAnycast(nip) {
// TODO(jsing): Create an LBVserver that only encapsulates
// the necessary state, rather than storing a full vserver
// snapshot.
lbVserver := v.snapshot()
lbVserver.Services = nil
lbVserver.Warnings = nil
if err := v.engine.lbInterface.AddVserver(lbVserver, ip.AF()); err != nil {
log.Fatalf("%v: failed to add Vserver: %v", v, err)
}
v.lbVservers[ip] = lbVserver
vip := seesaw.NewVIP(nip, nil)
if err := v.engine.lbInterface.AddVIP(vip); err != nil {
log.Fatalf("%v: failed to add VIP %v: %v", v, ip, err)
}
// TODO(angusc): Filter out anycast VIPs for non-anycast clusters further
// upstream.
if v.engine.config.AnycastEnabled {
log.Infof("%v: advertising BGP route for %v", v, ip)
if err := ncc.BGPAdvertiseVIP(nip); err != nil {
log.Fatalf("%v: failed to advertise VIP %v: %v", v, ip, err)
}
} else {
log.Warningf("%v: %v is an anycast VIP, but anycast is not enabled", v, ip)
}
}
log.Infof("%v: VIP %v up", v, ip)
}
开发者ID:bluemutedwisdom,项目名称:seesaw,代码行数:44,代码来源:vserver.go
示例5: unmarkBackend
// unmarkBackend removes the mark for a given backend and removes the IPVS
// service entry if it exists.
func (h *healthcheckManager) unmarkBackend(backend seesaw.IP) {
mark, ok := h.marks[backend]
if !ok {
return
}
ip := net.IPv6zero
if backend.AF() == seesaw.IPv4 {
ip = net.IPv4zero
}
ipvsSvc := &ipvs.Service{
Address: ip,
Protocol: ipvs.IPProto(0),
Port: 0,
Scheduler: "rr",
FirewallMark: mark,
Destinations: []*ipvs.Destination{
{
Address: backend.IP(),
Port: 0,
Weight: 1,
Flags: ipvs.DFForwardRoute,
},
},
}
if err := h.ncc.Dial(); err != nil {
log.Fatalf("Failed to connect to NCC: %v", err)
}
defer h.ncc.Close()
log.Infof("Removing DSR IPVS service for %s (mark %d)", backend, mark)
if err := h.ncc.IPVSDeleteService(ipvsSvc); err != nil {
log.Fatalf("Failed to remove DSR IPVS service: %v", err)
}
delete(h.marks, backend)
h.markAlloc.put(mark)
}
开发者ID:Cepave,项目名称:lvs-metrics,代码行数:42,代码来源:healthcheck.go
注:本文中的github.com/google/seesaw/common/seesaw.IP类示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论