• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Golang gopacket.PacketBuilder类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Golang中github.com/google/gopacket.PacketBuilder的典型用法代码示例。如果您正苦于以下问题:Golang PacketBuilder类的具体用法?Golang PacketBuilder怎么用?Golang PacketBuilder使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了PacketBuilder类的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: decodeVXLAN

func decodeVXLAN(data []byte, p gopacket.PacketBuilder) error {
	vx := &VXLAN{}

	// VNI is a 24bit number, Uint32 requires 32 bits
	var buf [4]byte
	copy(buf[1:], data[4:7])

	// RFC 7348 https://tools.ietf.org/html/rfc7348
	vx.ValidIDFlag = data[0]&0x08 > 0        // 'I' bit per RFC7348
	vx.VNI = binary.BigEndian.Uint32(buf[:]) // VXLAN Network Identifier per RFC7348

	// Group Based Policy https://tools.ietf.org/html/draft-smith-vxlan-group-policy-00
	vx.GBPExtension = data[0]&0x80 > 0                       // 'G' bit per the group policy draft
	vx.GBPDontLearn = data[1]&0x40 > 0                       // 'D' bit - the egress VTEP MUST NOT learn the source address of the encapsulated frame.
	vx.GBPApplied = data[1]&0x80 > 0                         // 'A' bit - indicates that the group policy has already been applied to this packet.
	vx.GBPGroupPolicyID = binary.BigEndian.Uint16(data[2:4]) // Policy ID as per the group policy draft

	// Layer information
	const vxlanLength = 8
	vx.Contents = data[:vxlanLength]
	vx.Payload = data[vxlanLength:]

	p.AddLayer(vx)
	return p.NextDecoder(LinkTypeEthernet)
}
开发者ID:jesseward,项目名称:gopacket,代码行数:25,代码来源:vxlan.go


示例2: decodeSCTPEmptyLayer

func decodeSCTPEmptyLayer(data []byte, p gopacket.PacketBuilder) error {
	sc := &SCTPEmptyLayer{
		SCTPChunk: decodeSCTPChunk(data),
	}
	p.AddLayer(sc)
	return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}
开发者ID:CNDonny,项目名称:scope,代码行数:7,代码来源:sctp.go


示例3: decodeMach

func decodeMach(data []byte, p gopacket.PacketBuilder) (err error) {
	panic("FIXME")
	defer errs.PassE(&err)
	m := &Mach{}
	errs.CheckE(m.DecodeFromBytes(data, p))
	p.AddLayer(m)
	return p.NextDecoder(m.NextLayerType())
}
开发者ID:ikravets,项目名称:ev,代码行数:8,代码来源:mach.go


示例4: decodeMoldUDP64

func decodeMoldUDP64(data []byte, p gopacket.PacketBuilder) error {
	m := &MoldUDP64{}
	if err := m.DecodeFromBytes(data, p); err != nil {
		return err
	}
	p.AddLayer(m)
	return p.NextDecoder(m.NextLayerType())
}
开发者ID:ikravets,项目名称:ev,代码行数:8,代码来源:moldudp64.go


示例5: decodeSCTPShutdown

func decodeSCTPShutdown(data []byte, p gopacket.PacketBuilder) error {
	sc := &SCTPShutdown{
		SCTPChunk:        decodeSCTPChunk(data),
		CumulativeTSNAck: binary.BigEndian.Uint32(data[4:8]),
	}
	p.AddLayer(sc)
	return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}
开发者ID:CNDonny,项目名称:scope,代码行数:8,代码来源:sctp.go


示例6: Decode

func (a TomMessageType) Decode(data []byte, p gopacket.PacketBuilder) error {
	layer := TomMessageTypeMetadata[a].CreateLayer()
	if err := layer.DecodeFromBytes(data, p); err != nil {
		return err
	}
	p.AddLayer(layer)
	return p.NextDecoder(layer.NextLayerType())
}
开发者ID:ikravets,项目名称:ev,代码行数:8,代码来源:tom.go


示例7: decodeLoopback

func decodeLoopback(data []byte, p gopacket.PacketBuilder) error {
	l := Loopback{}
	if err := l.DecodeFromBytes(data, gopacket.NilDecodeFeedback); err != nil {
		return err
	}
	p.AddLayer(&l)
	return p.NextDecoder(l.Family)
}
开发者ID:nplanel,项目名称:gopacket,代码行数:8,代码来源:loopback.go


示例8: decodeSCTPCookieEcho

func decodeSCTPCookieEcho(data []byte, p gopacket.PacketBuilder) error {
	sc := &SCTPCookieEcho{
		SCTPChunk: decodeSCTPChunk(data),
	}
	sc.Cookie = data[4:sc.Length]
	p.AddLayer(sc)
	return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}
开发者ID:CNDonny,项目名称:scope,代码行数:8,代码来源:sctp.go


示例9: decodeICMPv4

func decodeICMPv4(data []byte, p gopacket.PacketBuilder) error {
	i := &ICMPv4{}
	err := i.DecodeFromBytes(data, p)
	if err != nil {
		return err
	}
	p.AddLayer(i)
	return p.NextDecoder(gopacket.LayerTypePayload)
}
开发者ID:CNDonny,项目名称:scope,代码行数:9,代码来源:icmp4.go


示例10: decodeDHCPv4

func decodeDHCPv4(data []byte, p gopacket.PacketBuilder) error {
	dhcp := &DHCPv4{}
	err := dhcp.DecodeFromBytes(data, p)
	if err != nil {
		return err
	}
	p.AddLayer(dhcp)
	return p.NextDecoder(gopacket.LayerTypePayload)
}
开发者ID:jesseward,项目名称:gopacket,代码行数:9,代码来源:dhcpv4.go


示例11: decodeVxlan

func decodeVxlan(data []byte, p gopacket.PacketBuilder) error {
	v := &VXLAN{BaseLayer: BaseLayer{Contents: data}}
	err := v.DecodeFromBytes(data, p)
	p.AddLayer(v)
	if err != nil {
		return err
	}
	return p.NextDecoder(v.NextLayerType())
}
开发者ID:ccordes-snaproute,项目名称:gopacket,代码行数:9,代码来源:vxlan.go


示例12: decodeIPv6HopByHop

func decodeIPv6HopByHop(data []byte, p gopacket.PacketBuilder) error {
	i := &IPv6HopByHop{}
	err := i.DecodeFromBytes(data, p)
	p.AddLayer(i)
	if err != nil {
		return err
	}
	return p.NextDecoder(i.NextHeader)
}
开发者ID:read-later,项目名称:gopacket,代码行数:9,代码来源:ip6.go


示例13: decodeIPSecESP

func decodeIPSecESP(data []byte, p gopacket.PacketBuilder) error {
	i := &IPSecESP{
		BaseLayer: BaseLayer{data, nil},
		SPI:       binary.BigEndian.Uint32(data[:4]),
		Seq:       binary.BigEndian.Uint32(data[4:8]),
		Encrypted: data[8:],
	}
	p.AddLayer(i)
	return nil
}
开发者ID:CNDonny,项目名称:scope,代码行数:10,代码来源:ipsec.go


示例14: decodeDNS

// decodeDNS decodes the byte slice into a DNS type. It also
// setups the application Layer in PacketBuilder.
func decodeDNS(data []byte, p gopacket.PacketBuilder) error {
	d := &DNS{}
	err := d.DecodeFromBytes(data, p)
	if err != nil {
		return err
	}
	p.AddLayer(d)
	p.SetApplicationLayer(d)
	return nil
}
开发者ID:nhooyr,项目名称:gopacket,代码行数:12,代码来源:dns.go


示例15: decodeSCTPEmptyLayer

func decodeSCTPEmptyLayer(data []byte, p gopacket.PacketBuilder) error {
	chunk, err := decodeSCTPChunk(data)
	if err != nil {
		return err
	}
	sc := &SCTPEmptyLayer{
		SCTPChunk: chunk,
	}
	p.AddLayer(sc)
	return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}
开发者ID:cdshann,项目名称:minimega,代码行数:11,代码来源:sctp.go


示例16: decodeCapwapDataKeepAlive

func decodeCapwapDataKeepAlive(data []byte, p gopacket.PacketBuilder) error {
	length := binary.BigEndian.Uint16(data)
	p.AddLayer(&CapwapDataKeepAlive{
		BaseLayer: layers.BaseLayer{
			Contents: data[:2],
			Payload:  data[2:length],
		},
		MessageElementLength: length,
	})
	return p.NextDecoder(gopacket.LayerTypePayload)
}
开发者ID:skyportsystems,项目名称:suppl,代码行数:11,代码来源:suppl.go


示例17: decodeEthernetCTP

func decodeEthernetCTP(data []byte, p gopacket.PacketBuilder) error {
	c := &EthernetCTP{
		SkipCount: binary.LittleEndian.Uint16(data[:2]),
		BaseLayer: BaseLayer{data[:2], data[2:]},
	}
	if c.SkipCount%2 != 0 {
		return fmt.Errorf("EthernetCTP skip count is odd: %d", c.SkipCount)
	}
	p.AddLayer(c)
	return p.NextDecoder(gopacket.DecodeFunc(decodeEthernetCTPFromFunctionType))
}
开发者ID:nplanel,项目名称:gopacket,代码行数:11,代码来源:ctp.go


示例18: decodingLayerDecoder

func decodingLayerDecoder(d layerDecodingLayer, data []byte, p gopacket.PacketBuilder) error {
	err := d.DecodeFromBytes(data, p)
	if err != nil {
		return err
	}
	p.AddLayer(d)
	next := d.NextLayerType()
	if next == gopacket.LayerTypeZero {
		return nil
	}
	return p.NextDecoder(next)
}
开发者ID:CNDonny,项目名称:scope,代码行数:12,代码来源:base.go


示例19: decodePPPoE

// decodePPPoE decodes the PPPoE header (see http://tools.ietf.org/html/rfc2516).
func decodePPPoE(data []byte, p gopacket.PacketBuilder) error {
	pppoe := &PPPoE{
		Version:   data[0] >> 4,
		Type:      data[0] & 0x0F,
		Code:      PPPoECode(data[1]),
		SessionId: binary.BigEndian.Uint16(data[2:4]),
		Length:    binary.BigEndian.Uint16(data[4:6]),
	}
	pppoe.BaseLayer = BaseLayer{data[:6], data[6 : 6+pppoe.Length]}
	p.AddLayer(pppoe)
	return p.NextDecoder(pppoe.Code)
}
开发者ID:hgGeorg,项目名称:mongo,代码行数:13,代码来源:pppoe.go


示例20: decodeDot11NoFCS

func decodeDot11NoFCS(data []byte, p gopacket.PacketBuilder) error {
	payload := append(data, 0, 0, 0, 0)
	h := crc32.NewIEEE()
	h.Write(data)
	binary.LittleEndian.PutUint32(payload[len(data):], h.Sum32())
	p.AddLayer(&Dot11NoFCS{
		BaseLayer: layers.BaseLayer{
			Payload: payload,
		},
	})
	return p.NextDecoder(layers.LayerTypeDot11)
}
开发者ID:skyportsystems,项目名称:suppl,代码行数:12,代码来源:suppl.go



注:本文中的github.com/google/gopacket.PacketBuilder类示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Golang gopacket.SerializeBuffer类代码示例发布时间:2022-05-23
下一篇:
Golang gopacket.Packet类代码示例发布时间:2022-05-23
热门推荐
热门话题
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap