本文整理汇总了Golang中github.com/docker/libcontainer/netlink.CreateBridge函数的典型用法代码示例。如果您正苦于以下问题:Golang CreateBridge函数的具体用法?Golang CreateBridge怎么用?Golang CreateBridge使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了CreateBridge函数的6个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。
示例1: setupDevice
// SetupDevice create a new bridge interface/
func setupDevice(config *networkConfiguration, i *bridgeInterface) error {
var setMac bool
// We only attempt to create the bridge when the requested device name is
// the default one.
if config.BridgeName != DefaultBridgeName && !config.AllowNonDefaultBridge {
return NonDefaultBridgeExistError(config.BridgeName)
}
// Set the bridgeInterface netlink.Bridge.
i.Link = &netlink.Bridge{
LinkAttrs: netlink.LinkAttrs{
Name: config.BridgeName,
},
}
// Only set the bridge's MAC address if the kernel version is > 3.3, as it
// was not supported before that.
kv, err := kernel.GetKernelVersion()
if err == nil && (kv.Kernel >= 3 && kv.Major >= 3) {
setMac = true
}
return bri.CreateBridge(config.BridgeName, setMac)
}
开发者ID:alecbenson,项目名称:libnetwork,代码行数:26,代码来源:setup_device.go
示例2: createBridge
func createBridge(name, network, natIface string) (*Bridge, error) {
ipAddr, ipNet, err := net.ParseCIDR(network)
if err != nil {
return nil, err
}
if err := netlink.CreateBridge(name, true); err != nil {
return nil, err
}
iface, err := net.InterfaceByName(name)
if err != nil {
return nil, err
}
if err := netlink.NetworkLinkAddIp(iface, ipAddr, ipNet); err != nil {
return nil, err
}
if err := netlink.NetworkLinkUp(iface); err != nil {
return nil, err
}
if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte("1\n"), 0644); err != nil {
return nil, err
}
if err := setupIPTables(name, natIface); err != nil {
return nil, err
}
return &Bridge{name, iface, ipAddr, ipNet}, nil
}
开发者ID:kelsieflynn,项目名称:flynn-test-1,代码行数:26,代码来源:net.go
示例3: createBridgeIface
func createBridgeIface(name string) error {
kv, err := kernel.GetKernelVersion()
// only set the bridge's mac address if the kernel version is > 3.3
// before that it was not supported
setBridgeMacAddr := err == nil && (kv.Kernel >= 3 && kv.Major >= 3)
log.Debugf("setting bridge mac address = %v", setBridgeMacAddr)
return netlink.CreateBridge(name, setBridgeMacAddr)
}
开发者ID:baa-archieve,项目名称:docker,代码行数:8,代码来源:driver.go
示例4: idempotentlyCreateBridge
func idempotentlyCreateBridge(name string) (intf *net.Interface, err error) {
intfs, listErr := net.Interfaces()
if listErr != nil {
return nil, fmt.Errorf("devices: list bridges: %s", listErr)
}
if intf, ok := findBridgeIntf(intfs, name); ok {
return intf, nil
}
if err := retry.Run(func() error {
return netlink.CreateBridge(name, true)
}); err != nil {
return nil, err
}
return net.InterfaceByName(name)
}
开发者ID:timani,项目名称:garden-linux,代码行数:18,代码来源:bridge.go
示例5: createBridge
func createBridge(name, network, natIface string) (*Bridge, error) {
ipAddr, ipNet, err := net.ParseCIDR(network)
if err != nil {
return nil, err
}
if err := netlink.CreateBridge(name, true); err != nil {
return nil, err
}
iface, err := net.InterfaceByName(name)
if err != nil {
return nil, err
}
// We need to explicitly assign the MAC address to avoid it changing to a lower value
// See: https://github.com/flynn/flynn/issues/223
b := random.Bytes(5)
mac := fmt.Sprintf("fe:%02x:%02x:%02x:%02x:%02x", b[0], b[1], b[2], b[3], b[4])
if err := netlink.NetworkSetMacAddress(iface, mac); err != nil {
return nil, err
}
if err := netlink.NetworkLinkAddIp(iface, ipAddr, ipNet); err != nil {
return nil, err
}
if err := netlink.NetworkLinkUp(iface); err != nil {
return nil, err
}
if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte("1\n"), 0644); err != nil {
return nil, err
}
if err := setupIPTables(name, natIface); err != nil {
return nil, err
}
bridge := &Bridge{
name: name,
iface: iface,
ipAddr: ipAddr,
ipNet: ipNet,
alloc: ipallocator.New(),
}
bridge.alloc.RequestIP(ipNet, ipAddr)
return bridge, nil
}
开发者ID:ably-forks,项目名称:flynn,代码行数:44,代码来源:net.go
示例6: ConfigureNetworking
// ConfigureNetworking is called once during host startup and sets up the local
// bridge and forwarding rules for containers.
func (l *LibcontainerBackend) ConfigureNetworking(config *host.NetworkConfig) error {
log := l.logger.New("fn", "ConfigureNetworking")
var err error
l.bridgeAddr, l.bridgeNet, err = net.ParseCIDR(config.Subnet)
if err != nil {
return err
}
l.ipalloc.RequestIP(l.bridgeNet, l.bridgeAddr)
err = netlink.CreateBridge(l.bridgeName, false)
bridgeExists := os.IsExist(err)
if err != nil && !bridgeExists {
return err
}
bridge, err := net.InterfaceByName(l.bridgeName)
if err != nil {
return err
}
if !bridgeExists {
// We need to explicitly assign the MAC address to avoid it changing to a lower value
// See: https://github.com/flynn/flynn/issues/223
b := random.Bytes(5)
bridgeMAC := fmt.Sprintf("fe:%02x:%02x:%02x:%02x:%02x", b[0], b[1], b[2], b[3], b[4])
if err := netlink.NetworkSetMacAddress(bridge, bridgeMAC); err != nil {
return err
}
}
currAddrs, err := bridge.Addrs()
if err != nil {
return err
}
setIP := true
for _, addr := range currAddrs {
ip, net, _ := net.ParseCIDR(addr.String())
if ip.Equal(l.bridgeAddr) && net.String() == l.bridgeNet.String() {
setIP = false
} else {
if err := netlink.NetworkLinkDelIp(bridge, ip, net); err != nil {
return err
}
}
}
if setIP {
if err := netlink.NetworkLinkAddIp(bridge, l.bridgeAddr, l.bridgeNet); err != nil {
return err
}
}
if err := netlink.NetworkLinkUp(bridge); err != nil {
return err
}
// enable IP forwarding
if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte("1\n"), 0644); err != nil {
return err
}
// Set up iptables for outbound traffic masquerading from containers to the
// rest of the network.
if err := iptables.EnableOutboundNAT(l.bridgeName, l.bridgeNet.String()); err != nil {
return err
}
// Read DNS config, discoverd uses the nameservers
dnsConf, err := dns.ClientConfigFromFile("/etc/resolv.conf")
if err != nil {
return err
}
config.Resolvers = dnsConf.Servers
// Write a resolv.conf to be bind-mounted into containers pointing at the
// future discoverd DNS listener
if err := os.MkdirAll("/etc/flynn", 0755); err != nil {
return err
}
var resolvSearch string
if len(dnsConf.Search) > 0 {
resolvSearch = fmt.Sprintf("search %s\n", strings.Join(dnsConf.Search, " "))
}
if err := ioutil.WriteFile("/etc/flynn/resolv.conf", []byte(fmt.Sprintf("%snameserver %s\n", resolvSearch, l.bridgeAddr.String())), 0644); err != nil {
return err
}
l.resolvConf = "/etc/flynn/resolv.conf"
// Allocate IPs for running jobs
l.containersMtx.Lock()
defer l.containersMtx.Unlock()
for _, container := range l.containers {
if !container.job.Config.HostNetwork {
if _, err := l.ipalloc.RequestIP(l.bridgeNet, container.IP); err != nil {
log.Error("error requesting ip", "job.id", container.job.ID, "err", err)
}
}
}
close(l.networkConfigured)
return nil
//.........这里部分代码省略.........
开发者ID:ably-forks,项目名称:flynn,代码行数:101,代码来源:libcontainer_backend.go
注:本文中的github.com/docker/libcontainer/netlink.CreateBridge函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论