• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Golang configs.Config类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Golang中github.com/docker/libcontainer/configs.Config的典型用法代码示例。如果您正苦于以下问题:Golang Config类的具体用法?Golang Config怎么用?Golang Config使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了Config类的11个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: setupMounts

func (d *driver) setupMounts(container *configs.Config, c *execdriver.Command) error {
	userMounts := make(map[string]struct{})
	for _, m := range c.Mounts {
		userMounts[m.Destination] = struct{}{}
	}

	// Filter out mounts that are overriden by user supplied mounts
	var defaultMounts []*configs.Mount
	for _, m := range container.Mounts {
		if _, ok := userMounts[m.Destination]; !ok {
			defaultMounts = append(defaultMounts, m)
		}
	}
	container.Mounts = defaultMounts

	for _, m := range c.Mounts {
		flags := syscall.MS_BIND | syscall.MS_REC
		if !m.Writable {
			flags |= syscall.MS_RDONLY
		}
		if m.Slave {
			flags |= syscall.MS_SLAVE
		}
		container.Mounts = append(container.Mounts, &configs.Mount{
			Source:      m.Source,
			Destination: m.Destination,
			Device:      "bind",
			Flags:       flags,
		})
	}
	return nil
}
开发者ID:balagopalraj,项目名称:clearlinux,代码行数:32,代码来源:create.go


示例2: createNetwork

func (d *driver) createNetwork(container *configs.Config, c *execdriver.Command) error {
	if c.Network.HostNetworking {
		container.Namespaces.Remove(configs.NEWNET)
		return nil
	}

	container.Networks = []*configs.Network{
		{
			Type: "loopback",
		},
	}

	iName, err := generateIfaceName()
	if err != nil {
		return err
	}
	if c.Network.Interface != nil {
		vethNetwork := configs.Network{
			Name:              "eth0",
			HostInterfaceName: iName,
			Mtu:               c.Network.Mtu,
			Address:           fmt.Sprintf("%s/%d", c.Network.Interface.IPAddress, c.Network.Interface.IPPrefixLen),
			MacAddress:        c.Network.Interface.MacAddress,
			Gateway:           c.Network.Interface.Gateway,
			Type:              "veth",
			Bridge:            c.Network.Interface.Bridge,
			HairpinMode:       c.Network.Interface.HairpinMode,
		}
		if c.Network.Interface.GlobalIPv6Address != "" {
			vethNetwork.IPv6Address = fmt.Sprintf("%s/%d", c.Network.Interface.GlobalIPv6Address, c.Network.Interface.GlobalIPv6PrefixLen)
			vethNetwork.IPv6Gateway = c.Network.Interface.IPv6Gateway
		}
		container.Networks = append(container.Networks, &vethNetwork)
	}

	if c.Network.ContainerID != "" {
		d.Lock()
		active := d.activeContainers[c.Network.ContainerID]
		d.Unlock()

		if active == nil {
			return fmt.Errorf("%s is not a valid running container to join", c.Network.ContainerID)
		}

		state, err := active.State()
		if err != nil {
			return err
		}

		container.Namespaces.Add(configs.NEWNET, state.NamespacePaths[configs.NEWNET])
	}

	return nil
}
开发者ID:zb-basketball2015,项目名称:docker,代码行数:54,代码来源:create.go


示例3: setPrivileged

func (d *driver) setPrivileged(container *configs.Config) (err error) {
	container.Capabilities = execdriver.GetAllCapabilities()
	container.Cgroups.AllowAllDevices = true

	hostDevices, err := devices.HostDevices()
	if err != nil {
		return err
	}
	container.Devices = hostDevices

	if apparmor.IsEnabled() {
		container.AppArmorProfile = "unconfined"
	}

	return nil
}
开发者ID:jonahzheng,项目名称:docker,代码行数:16,代码来源:create.go


示例4: createUTS

func (d *driver) createUTS(container *configs.Config, c *execdriver.Command) error {
	if c.UTS.HostUTS {
		container.Namespaces.Remove(configs.NEWUTS)
		container.Hostname = ""
		return nil
	}

	return nil
}
开发者ID:jonahzheng,项目名称:docker,代码行数:9,代码来源:create.go


示例5: setupMounts

func (d *driver) setupMounts(container *configs.Config, c *execdriver.Command) error {
	userMounts := make(map[string]struct{})
	for _, m := range c.Mounts {
		userMounts[m.Destination] = struct{}{}
	}

	// Filter out mounts that are overriden by user supplied mounts
	var defaultMounts []*configs.Mount
	_, mountDev := userMounts["/dev"]
	for _, m := range container.Mounts {
		if _, ok := userMounts[m.Destination]; !ok {
			if mountDev && strings.HasPrefix(m.Destination, "/dev/") {
				continue
			}
			defaultMounts = append(defaultMounts, m)
		}
	}
	container.Mounts = defaultMounts

	for _, m := range c.Mounts {
		dest, err := symlink.FollowSymlinkInScope(filepath.Join(c.Rootfs, m.Destination), c.Rootfs)
		if err != nil {
			return err
		}
		flags := syscall.MS_BIND | syscall.MS_REC
		if !m.Writable {
			flags |= syscall.MS_RDONLY
		}
		if m.Slave {
			flags |= syscall.MS_SLAVE
		}

		container.Mounts = append(container.Mounts, &configs.Mount{
			Source:      m.Source,
			Destination: dest,
			Device:      "bind",
			Flags:       flags,
		})
	}
	return nil
}
开发者ID:jankeromnes,项目名称:docker,代码行数:41,代码来源:create.go


示例6: setupRlimits

func (d *driver) setupRlimits(container *configs.Config, c *execdriver.Command) {
	if c.Resources == nil {
		return
	}

	for _, rlimit := range c.Resources.Rlimits {
		container.Rlimits = append(container.Rlimits, configs.Rlimit{
			Type: rlimit.Type,
			Hard: rlimit.Hard,
			Soft: rlimit.Soft,
		})
	}
}
开发者ID:jonahzheng,项目名称:docker,代码行数:13,代码来源:create.go


示例7: setupPipes

func setupPipes(container *configs.Config, processConfig *execdriver.ProcessConfig, p *libcontainer.Process, pipes *execdriver.Pipes) error {
	var term execdriver.Terminal
	var err error

	if processConfig.Tty {
		rootuid, err := container.HostUID()
		if err != nil {
			return err
		}
		cons, err := p.NewConsole(rootuid)
		if err != nil {
			return err
		}
		term, err = NewTtyConsole(cons, pipes, rootuid)
	} else {
		p.Stdout = pipes.Stdout
		p.Stderr = pipes.Stderr
		r, w, err := os.Pipe()
		if err != nil {
			return err
		}
		if pipes.Stdin != nil {
			go func() {
				io.Copy(w, pipes.Stdin)
				w.Close()
			}()
			p.Stdin = r
		}
		term = &execdriver.StdConsole{}
	}
	if err != nil {
		return err
	}
	processConfig.Terminal = term
	return nil
}
开发者ID:colebrumley,项目名称:docker,代码行数:36,代码来源:driver.go


示例8: modifySecurityProfile

func modifySecurityProfile(context *cli.Context, config *configs.Config) {
	profileName := context.String("security")
	if profileName == "" {
		return
	}
	profile := profiles[profileName]
	if profile == nil {
		logrus.Fatalf("invalid profile name %q", profileName)
	}
	config.Rlimits = profile.Rlimits
	config.Capabilities = profile.Capabilities
	config.Seccomp = profile.Seccomp
	config.AppArmorProfile = profile.ApparmorProfile
	config.MountLabel = profile.MountLabel
	config.ProcessLabel = profile.ProcessLabel
}
开发者ID:johnmccawley,项目名称:origin,代码行数:16,代码来源:config.go


示例9: setupLabels

func (d *driver) setupLabels(container *configs.Config, c *execdriver.Command) {
	container.ProcessLabel = c.ProcessLabel
	container.MountLabel = c.MountLabel
}
开发者ID:jonahzheng,项目名称:docker,代码行数:4,代码来源:create.go


示例10: modify

func modify(config *configs.Config, context *cli.Context) {
	config.ParentDeathSignal = context.Int("parent-death-signal")
	config.Readonlyfs = context.Bool("read-only")
	config.Cgroups.CpusetCpus = context.String("cpuset-cpus")
	config.Cgroups.CpusetMems = context.String("cpuset-mems")
	config.Cgroups.CpuShares = int64(context.Int("cpushares"))
	config.Cgroups.Memory = int64(context.Int("memory-limit"))
	config.Cgroups.MemorySwap = int64(context.Int("memory-swap"))
	config.AppArmorProfile = context.String("apparmor-profile")
	config.ProcessLabel = context.String("process-label")
	config.MountLabel = context.String("mount-label")

	rootfs := context.String("rootfs")
	if rootfs != "" {
		config.Rootfs = rootfs
	}

	userns_uid := context.Int("userns-root-uid")
	if userns_uid != 0 {
		config.Namespaces.Add(configs.NEWUSER, "")
		config.UidMappings = []configs.IDMap{
			{ContainerID: 0, HostID: userns_uid, Size: 1},
			{ContainerID: 1, HostID: 1, Size: userns_uid - 1},
			{ContainerID: userns_uid + 1, HostID: userns_uid + 1, Size: math.MaxInt32 - userns_uid},
		}
		config.GidMappings = []configs.IDMap{
			{ContainerID: 0, HostID: userns_uid, Size: 1},
			{ContainerID: 1, HostID: 1, Size: userns_uid - 1},
			{ContainerID: userns_uid + 1, HostID: userns_uid + 1, Size: math.MaxInt32 - userns_uid},
		}
		for _, node := range config.Devices {
			node.Uid = uint32(userns_uid)
			node.Gid = uint32(userns_uid)
		}
	}
	for _, rawBind := range context.StringSlice("bind") {
		mount := &configs.Mount{
			Device: "bind",
			Flags:  syscall.MS_BIND | syscall.MS_REC,
		}
		parts := strings.SplitN(rawBind, ":", 3)
		switch len(parts) {
		default:
			logrus.Fatalf("invalid bind mount %s", rawBind)
		case 2:
			mount.Source, mount.Destination = parts[0], parts[1]
		case 3:
			mount.Source, mount.Destination = parts[0], parts[1]
			switch parts[2] {
			case "ro":
				mount.Flags |= syscall.MS_RDONLY
			case "rw":
			default:
				logrus.Fatalf("invalid bind mount mode %s", parts[2])
			}
		}
		config.Mounts = append(config.Mounts, mount)
	}
	for _, tmpfs := range context.StringSlice("tmpfs") {
		config.Mounts = append(config.Mounts, &configs.Mount{
			Device:      "tmpfs",
			Destination: tmpfs,
			Flags:       syscall.MS_NOEXEC | syscall.MS_NOSUID | syscall.MS_NODEV,
		})
	}
	for flag, value := range map[string]configs.NamespaceType{
		"net": configs.NEWNET,
		"mnt": configs.NEWNS,
		"pid": configs.NEWPID,
		"ipc": configs.NEWIPC,
		"uts": configs.NEWUTS,
	} {
		switch v := context.String(flag); v {
		case "host":
			config.Namespaces.Remove(value)
		case "", "private":
			if !config.Namespaces.Contains(value) {
				config.Namespaces.Add(value, "")
			}
			if flag == "net" {
				config.Networks = []*configs.Network{
					{
						Type:    "loopback",
						Address: "127.0.0.1/0",
						Gateway: "localhost",
					},
				}
			}
			if flag == "uts" {
				config.Hostname = context.String("hostname")
			}
		default:
			config.Namespaces.Remove(value)
			config.Namespaces.Add(value, v)
		}
	}
	if bridge := context.String("veth-bridge"); bridge != "" {
		hostName, err := utils.GenerateRandomName("veth", 7)
		if err != nil {
			logrus.Fatal(err)
//.........这里部分代码省略.........
开发者ID:josephwinston,项目名称:docker,代码行数:101,代码来源:config.go


示例11: ReadConfig

// TODO(vmarmol): Deprecate over time as old Dockers are phased out.
func ReadConfig(dockerRoot, dockerRun, containerID string) (*configs.Config, error) {
	// Try using the new config if it is available.
	configPath := configPath(dockerRun, containerID)
	if utils.FileExists(configPath) {
		out, err := ioutil.ReadFile(configPath)
		if err != nil {
			return nil, err
		}

		var state libcontainer.State
		err = json.Unmarshal(out, &state)
		if err != nil {
			glog.Errorf("Unmarshal failure for: \n\n%v\n", string(out))
			return nil, err
		}
		return &state.Config, nil
	}

	// Fallback to reading the old config which is comprised of the state and config files.
	oldConfigPath := oldConfigPath(dockerRoot, containerID)
	out, err := ioutil.ReadFile(oldConfigPath)
	if err != nil {
		glog.Errorf("Unmarshal failure for: \n\n%v\n", string(out))
		return nil, err
	}

	// Try reading the preAPIConfig.
	var config preAPIConfig
	err = json.Unmarshal(out, &config)
	if err != nil {
		// Try to parse the old pre-API config. The main difference is that namespaces used to be a map, now it is a slice of structs.
		// The JSON marshaler will use the non-nested field before the nested one.
		type oldLibcontainerConfig struct {
			preAPIConfig
			OldNamespaces map[string]bool `json:"namespaces,omitempty"`
		}
		var oldConfig oldLibcontainerConfig
		err2 := json.Unmarshal(out, &oldConfig)
		if err2 != nil {
			// Use original error.
			return nil, err
		}

		// Translate the old pre-API config into the new config.
		config = oldConfig.preAPIConfig
		for ns := range oldConfig.OldNamespaces {
			config.Namespaces = append(config.Namespaces, configs.Namespace{
				Type: configs.NamespaceType(ns),
			})
		}
	}

	// Read the old state file as well.
	state, err := readState(dockerRoot, containerID)
	if err != nil {
		return nil, err
	}

	// Convert preAPIConfig + old state file to Config.
	// This only converts some of the fields, the ones we use.
	// You may need to add fields if the one you're interested in is not available.
	var result configs.Config
	result.Cgroups = new(configs.Cgroup)
	result.Rootfs = config.RootFs
	result.Hostname = config.Hostname
	result.Namespaces = config.Namespaces
	result.Capabilities = config.Capabilities
	for _, net := range config.Networks {
		n := &configs.Network{
			Name:              state.NetworkState.VethChild,
			Bridge:            net.Bridge,
			MacAddress:        net.MacAddress,
			Address:           net.Address,
			Gateway:           net.Gateway,
			IPv6Address:       net.IPv6Address,
			IPv6Gateway:       net.IPv6Gateway,
			HostInterfaceName: state.NetworkState.VethHost,
		}
		result.Networks = append(result.Networks, n)
	}
	result.Routes = config.Routes
	if config.Cgroups != nil {
		result.Cgroups = config.Cgroups
	}

	return &result, nil
}
开发者ID:schen59,项目名称:origin,代码行数:88,代码来源:compatibility.go



注:本文中的github.com/docker/libcontainer/configs.Config类示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Golang configs.Device类代码示例发布时间:2022-05-23
下一篇:
Golang systemd.UseSystemd函数代码示例发布时间:2022-05-23
热门推荐
热门话题
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap