Golang system.Mkdev函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/docker/docker/pkg/system.Mkdev函数的典型用法代码示例。如果您正苦于以下问题：Golang Mkdev函数的具体用法？Golang Mkdev怎么用？Golang Mkdev使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Mkdev函数的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: TestTarWithBlockCharFifo

func TestTarWithBlockCharFifo(t *testing.T) {
	origin, err := ioutil.TempDir("", "docker-test-tar-hardlink")
	if err != nil {
		t.Fatal(err)
	}
	defer os.RemoveAll(origin)
	if err := ioutil.WriteFile(path.Join(origin, "1"), []byte("hello world"), 0700); err != nil {
		t.Fatal(err)
	}
	if err := system.Mknod(path.Join(origin, "2"), syscall.S_IFBLK, int(system.Mkdev(int64(12), int64(5)))); err != nil {
		t.Fatal(err)
	}
	if err := system.Mknod(path.Join(origin, "3"), syscall.S_IFCHR, int(system.Mkdev(int64(12), int64(5)))); err != nil {
		t.Fatal(err)
	}
	if err := system.Mknod(path.Join(origin, "4"), syscall.S_IFIFO, int(system.Mkdev(int64(12), int64(5)))); err != nil {
		t.Fatal(err)
	}

	dest, err := ioutil.TempDir("", "docker-test-tar-hardlink-dest")
	if err != nil {
		t.Fatal(err)
	}
	defer os.RemoveAll(dest)

	// we'll do this in two steps to separate failure
	fh, err := Tar(origin, Uncompressed)
	if err != nil {
		t.Fatal(err)
	}

	// ensure we can read the whole thing with no error, before writing back out
	buf, err := ioutil.ReadAll(fh)
	if err != nil {
		t.Fatal(err)
	}

	bRdr := bytes.NewReader(buf)
	err = Untar(bRdr, dest, &TarOptions{Compression: Uncompressed})
	if err != nil {
		t.Fatal(err)
	}

	changes, err := ChangesDirs(origin, dest)
	if err != nil {
		t.Fatal(err)
	}
	if len(changes) > 0 {
		t.Fatalf("Tar with special device (block, char, fifo) should keep them (recreate them when untar) : %v", changes)
	}
}

开发者ID:carriercomm，项目名称:empire，代码行数:51，代码来源:archive_test.go

示例2: handleTarTypeBlockCharFifo

// handleTarTypeBlockCharFifo is an OS-specific helper function used by
// createTarFile to handle the following types of header: Block; Char; Fifo
func handleTarTypeBlockCharFifo(hdr *tar.Header, path string) error {
	mode := uint32(hdr.Mode & 07777)
	switch hdr.Typeflag {
	case tar.TypeBlock:
		mode |= syscall.S_IFBLK
	case tar.TypeChar:
		mode |= syscall.S_IFCHR
	case tar.TypeFifo:
		mode |= syscall.S_IFIFO
	}

	if err := system.Mknod(path, mode, int(system.Mkdev(hdr.Devmajor, hdr.Devminor))); err != nil {
		return err
	}
	return nil
}

开发者ID:pirater，项目名称:os，代码行数:18，代码来源:archive_unix.go

示例3: handleTarTypeBlockCharFifo

// handleTarTypeBlockCharFifo is an OS-specific helper function used by
// createTarFile to handle the following types of header: Block; Char; Fifo
func handleTarTypeBlockCharFifo(hdr *tar.Header, path string) error {
	if rsystem.RunningInUserNS() {
		// cannot create a device if running in user namespace
		return nil
	}

	mode := uint32(hdr.Mode & 07777)
	switch hdr.Typeflag {
	case tar.TypeBlock:
		mode |= syscall.S_IFBLK
	case tar.TypeChar:
		mode |= syscall.S_IFCHR
	case tar.TypeFifo:
		mode |= syscall.S_IFIFO
	}

	if err := system.Mknod(path, mode, int(system.Mkdev(hdr.Devmajor, hdr.Devminor))); err != nil {
		return err
	}
	return nil
}

开发者ID:vdemeester，项目名称:rancher-compose，代码行数:23，代码来源:archive_unix.go

示例4: createTarFile

func createTarFile(path, extractDir string, hdr *tar.Header, reader io.Reader, Lchown bool) error {
	// hdr.Mode is in linux format, which we can use for sycalls,
	// but for os.Foo() calls we need the mode converted to os.FileMode,
	// so use hdrInfo.Mode() (they differ for e.g. setuid bits)
	hdrInfo := hdr.FileInfo()

	switch hdr.Typeflag {
	case tar.TypeDir:
		// Create directory unless it exists as a directory already.
		// In that case we just want to merge the two
		if fi, err := os.Lstat(path); !(err == nil && fi.IsDir()) {
			if err := os.Mkdir(path, hdrInfo.Mode()); err != nil {
				return err
			}
		}

	case tar.TypeReg, tar.TypeRegA:
		// Source is regular file
		file, err := os.OpenFile(path, os.O_CREATE|os.O_WRONLY, hdrInfo.Mode())
		if err != nil {
			return err
		}
		if _, err := io.Copy(file, reader); err != nil {
			file.Close()
			return err
		}
		file.Close()

	case tar.TypeBlock, tar.TypeChar, tar.TypeFifo:
		mode := uint32(hdr.Mode & 07777)
		switch hdr.Typeflag {
		case tar.TypeBlock:
			mode |= syscall.S_IFBLK
		case tar.TypeChar:
			mode |= syscall.S_IFCHR
		case tar.TypeFifo:
			mode |= syscall.S_IFIFO
		}

		if err := system.Mknod(path, mode, int(system.Mkdev(hdr.Devmajor, hdr.Devminor))); err != nil {
			return err
		}

	case tar.TypeLink:
		targetPath := filepath.Join(extractDir, hdr.Linkname)
		// check for hardlink breakout
		if !strings.HasPrefix(targetPath, extractDir) {
			return breakoutError(fmt.Errorf("invalid hardlink %q -> %q", targetPath, hdr.Linkname))
		}
		if err := os.Link(targetPath, path); err != nil {
			return err
		}

	case tar.TypeSymlink:
		// 	path 				-> hdr.Linkname = targetPath
		// e.g. /extractDir/path/to/symlink 	-> ../2/file	= /extractDir/path/2/file
		targetPath := filepath.Join(filepath.Dir(path), hdr.Linkname)

		// the reason we don't need to check symlinks in the path (with FollowSymlinkInScope) is because
		// that symlink would first have to be created, which would be caught earlier, at this very check:
		if !strings.HasPrefix(targetPath, extractDir) {
			return breakoutError(fmt.Errorf("invalid symlink %q -> %q", path, hdr.Linkname))
		}
		if err := os.Symlink(hdr.Linkname, path); err != nil {
			return err
		}

	case tar.TypeXGlobalHeader:
		logrus.Debugf("PAX Global Extended Headers found and ignored")
		return nil

	default:
		return fmt.Errorf("Unhandled tar header type %d\n", hdr.Typeflag)
	}

	if err := os.Lchown(path, hdr.Uid, hdr.Gid); err != nil && Lchown {
		return err
	}

	for key, value := range hdr.Xattrs {
		if err := system.Lsetxattr(path, key, []byte(value), 0); err != nil {
			return err
		}
	}

	// There is no LChmod, so ignore mode for symlink. Also, this
	// must happen after chown, as that can modify the file mode
	if hdr.Typeflag == tar.TypeLink {
		if fi, err := os.Lstat(hdr.Linkname); err == nil && (fi.Mode()&os.ModeSymlink == 0) {
			if err := os.Chmod(path, hdrInfo.Mode()); err != nil {
				return err
			}
		}
	} else if hdr.Typeflag != tar.TypeSymlink {
		if err := os.Chmod(path, hdrInfo.Mode()); err != nil {
			return err
		}
	}

	ts := []syscall.Timespec{timeToTimespec(hdr.AccessTime), timeToTimespec(hdr.ModTime)}
//.........这里部分代码省略.........

开发者ID:goodeggs，项目名称:logspout-sumo，代码行数:101，代码来源:archive.go

示例5: createTarFile

func createTarFile(path, extractDir string, hdr *tar.Header, reader io.Reader, Lchown bool) error {
	// hdr.Mode is in linux format, which we can use for sycalls,
	// but for os.Foo() calls we need the mode converted to os.FileMode,
	// so use hdrInfo.Mode() (they differ for e.g. setuid bits)
	hdrInfo := hdr.FileInfo()

	switch hdr.Typeflag {
	case tar.TypeDir:
		// Create directory unless it exists as a directory already.
		// In that case we just want to merge the two
		if fi, err := os.Lstat(path); !(err == nil && fi.IsDir()) {
			if err := os.Mkdir(path, hdrInfo.Mode()); err != nil {
				return err
			}
		}

	case tar.TypeReg, tar.TypeRegA:
		// Source is regular file
		file, err := os.OpenFile(path, os.O_CREATE|os.O_WRONLY, hdrInfo.Mode())
		if err != nil {
			return err
		}
		if _, err := io.Copy(file, reader); err != nil {
			file.Close()
			return err
		}
		file.Close()

	case tar.TypeBlock, tar.TypeChar, tar.TypeFifo:
		mode := uint32(hdr.Mode & 07777)
		switch hdr.Typeflag {
		case tar.TypeBlock:
			mode |= syscall.S_IFBLK
		case tar.TypeChar:
			mode |= syscall.S_IFCHR
		case tar.TypeFifo:
			mode |= syscall.S_IFIFO
		}

		if err := system.Mknod(path, mode, int(system.Mkdev(hdr.Devmajor, hdr.Devminor))); err != nil {
			return err
		}

	case tar.TypeLink:
		if err := os.Link(filepath.Join(extractDir, hdr.Linkname), path); err != nil {
			return err
		}

	case tar.TypeSymlink:
		if err := os.Symlink(hdr.Linkname, path); err != nil {
			return err
		}

	case tar.TypeXGlobalHeader:
		log.Debugf("PAX Global Extended Headers found and ignored")
		return nil

	default:
		return fmt.Errorf("Unhandled tar header type %d\n", hdr.Typeflag)
	}

	if err := os.Lchown(path, hdr.Uid, hdr.Gid); err != nil && Lchown {
		return err
	}

	for key, value := range hdr.Xattrs {
		if err := system.Lsetxattr(path, key, []byte(value), 0); err != nil {
			return err
		}
	}

	// There is no LChmod, so ignore mode for symlink. Also, this
	// must happen after chown, as that can modify the file mode
	if hdr.Typeflag != tar.TypeSymlink {
		if err := os.Chmod(path, hdrInfo.Mode()); err != nil {
			return err
		}
	}

	ts := []syscall.Timespec{timeToTimespec(hdr.AccessTime), timeToTimespec(hdr.ModTime)}
	// syscall.UtimesNano doesn't support a NOFOLLOW flag atm, and
	if hdr.Typeflag != tar.TypeSymlink {
		if err := system.UtimesNano(path, ts); err != nil && err != system.ErrNotSupportedPlatform {
			return err
		}
	} else {
		if err := system.LUtimesNano(path, ts); err != nil && err != system.ErrNotSupportedPlatform {
			return err
		}
	}
	return nil
}

开发者ID:ajoy123，项目名称:docker-machine，代码行数:92，代码来源:archive.go

注：本文中的github.com/docker/docker/pkg/system.Mkdev函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。