• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Golang nl.NewNetlinkRequest函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Golang中github.com/currantlabs/netlink/nl.NewNetlinkRequest函数的典型用法代码示例。如果您正苦于以下问题:Golang NewNetlinkRequest函数的具体用法?Golang NewNetlinkRequest怎么用?Golang NewNetlinkRequest使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了NewNetlinkRequest函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: NeighList

// NeighList gets a list of IP-MAC mappings in the system (ARP table).
// Equivalent to: `ip neighbor show`.
// The list can be filtered by link and ip family.
func NeighList(linkIndex, family int) ([]Neigh, error) {
	req := nl.NewNetlinkRequest(syscall.RTM_GETNEIGH, syscall.NLM_F_DUMP)
	msg := Ndmsg{
		Family: uint8(family),
		Index:  uint32(linkIndex),
	}
	req.AddData(&msg)

	msgs, err := req.Execute(syscall.NETLINK_ROUTE, syscall.RTM_NEWNEIGH)
	if err != nil {
		return nil, err
	}

	var res []Neigh
	for _, m := range msgs {
		ndm := deserializeNdmsg(m)
		if linkIndex != 0 && int(ndm.Index) != linkIndex {
			// Ignore messages from other interfaces
			continue
		}

		neigh, err := NeighDeserialize(m)
		if err != nil {
			continue
		}

		res = append(res, *neigh)
	}

	return res, nil
}
开发者ID:currantlabs,项目名称:netlink,代码行数:34,代码来源:neigh_linux.go


示例2: XfrmPolicyAdd

// XfrmPolicyAdd will add an xfrm policy to the system.
// Equivalent to: `ip xfrm policy add $policy`
func XfrmPolicyAdd(policy *XfrmPolicy) error {
	req := nl.NewNetlinkRequest(nl.XFRM_MSG_NEWPOLICY, syscall.NLM_F_CREATE|syscall.NLM_F_EXCL|syscall.NLM_F_ACK)

	msg := &nl.XfrmUserpolicyInfo{}
	selFromPolicy(&msg.Sel, policy)
	msg.Priority = uint32(policy.Priority)
	msg.Index = uint32(policy.Index)
	msg.Dir = uint8(policy.Dir)
	msg.Lft.SoftByteLimit = nl.XFRM_INF
	msg.Lft.HardByteLimit = nl.XFRM_INF
	msg.Lft.SoftPacketLimit = nl.XFRM_INF
	msg.Lft.HardPacketLimit = nl.XFRM_INF
	req.AddData(msg)

	tmplData := make([]byte, nl.SizeofXfrmUserTmpl*len(policy.Tmpls))
	for i, tmpl := range policy.Tmpls {
		start := i * nl.SizeofXfrmUserTmpl
		userTmpl := nl.DeserializeXfrmUserTmpl(tmplData[start : start+nl.SizeofXfrmUserTmpl])
		userTmpl.XfrmId.Daddr.FromIP(tmpl.Dst)
		userTmpl.Saddr.FromIP(tmpl.Src)
		userTmpl.XfrmId.Proto = uint8(tmpl.Proto)
		userTmpl.Mode = uint8(tmpl.Mode)
		userTmpl.Reqid = uint32(tmpl.Reqid)
		userTmpl.Aalgos = ^uint32(0)
		userTmpl.Ealgos = ^uint32(0)
		userTmpl.Calgos = ^uint32(0)
	}
	if len(tmplData) > 0 {
		tmpls := nl.NewRtAttr(nl.XFRMA_TMPL, tmplData)
		req.AddData(tmpls)
	}

	_, err := req.Execute(syscall.NETLINK_XFRM, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:37,代码来源:xfrm_policy_linux.go


示例3: LinkByIndex

// LinkByIndex finds a link by index and returns a pointer to the object.
func LinkByIndex(index int) (Link, error) {
	req := nl.NewNetlinkRequest(syscall.RTM_GETLINK, syscall.NLM_F_ACK)

	msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
	msg.Index = int32(index)
	req.AddData(msg)

	return execGetLink(req)
}
开发者ID:currantlabs,项目名称:netlink,代码行数:10,代码来源:link_linux.go


示例4: XfrmPolicyDel

// XfrmPolicyDel will delete an xfrm policy from the system. Note that
// the Tmpls are ignored when matching the policy to delete.
// Equivalent to: `ip xfrm policy del $policy`
func XfrmPolicyDel(policy *XfrmPolicy) error {
	req := nl.NewNetlinkRequest(nl.XFRM_MSG_DELPOLICY, syscall.NLM_F_ACK)

	msg := &nl.XfrmUserpolicyId{}
	selFromPolicy(&msg.Sel, policy)
	msg.Index = uint32(policy.Index)
	msg.Dir = uint8(policy.Dir)
	req.AddData(msg)

	_, err := req.Execute(syscall.NETLINK_XFRM, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:15,代码来源:xfrm_policy_linux.go


示例5: XfrmPolicyList

// XfrmPolicyList gets a list of xfrm policies in the system.
// Equivalent to: `ip xfrm policy show`.
// The list can be filtered by ip family.
func XfrmPolicyList(family int) ([]XfrmPolicy, error) {
	req := nl.NewNetlinkRequest(nl.XFRM_MSG_GETPOLICY, syscall.NLM_F_DUMP)

	msg := nl.NewIfInfomsg(family)
	req.AddData(msg)

	msgs, err := req.Execute(syscall.NETLINK_XFRM, nl.XFRM_MSG_NEWPOLICY)
	if err != nil {
		return nil, err
	}

	var res []XfrmPolicy
	for _, m := range msgs {
		msg := nl.DeserializeXfrmUserpolicyInfo(m)

		if family != FAMILY_ALL && family != int(msg.Sel.Family) {
			continue
		}

		var policy XfrmPolicy

		policy.Dst = msg.Sel.Daddr.ToIPNet(msg.Sel.PrefixlenD)
		policy.Src = msg.Sel.Saddr.ToIPNet(msg.Sel.PrefixlenS)
		policy.Priority = int(msg.Priority)
		policy.Index = int(msg.Index)
		policy.Dir = Dir(msg.Dir)

		attrs, err := nl.ParseRouteAttr(m[msg.Len():])
		if err != nil {
			return nil, err
		}

		for _, attr := range attrs {
			switch attr.Attr.Type {
			case nl.XFRMA_TMPL:
				max := len(attr.Value)
				for i := 0; i < max; i += nl.SizeofXfrmUserTmpl {
					var resTmpl XfrmPolicyTmpl
					tmpl := nl.DeserializeXfrmUserTmpl(attr.Value[i : i+nl.SizeofXfrmUserTmpl])
					resTmpl.Dst = tmpl.XfrmId.Daddr.ToIP()
					resTmpl.Src = tmpl.Saddr.ToIP()
					resTmpl.Proto = Proto(tmpl.XfrmId.Proto)
					resTmpl.Mode = Mode(tmpl.Mode)
					resTmpl.Reqid = int(tmpl.Reqid)
					policy.Tmpls = append(policy.Tmpls, resTmpl)
				}
			}
		}
		res = append(res, policy)
	}
	return res, nil
}
开发者ID:currantlabs,项目名称:netlink,代码行数:55,代码来源:xfrm_policy_linux.go


示例6: LinkGetProtinfo

func LinkGetProtinfo(link Link) (Protinfo, error) {
	base := link.Attrs()
	ensureIndex(base)
	var pi Protinfo
	req := nl.NewNetlinkRequest(syscall.RTM_GETLINK, syscall.NLM_F_DUMP)
	msg := nl.NewIfInfomsg(syscall.AF_BRIDGE)
	req.AddData(msg)
	msgs, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	if err != nil {
		return pi, err
	}

	for _, m := range msgs {
		ans := nl.DeserializeIfInfomsg(m)
		if int(ans.Index) != base.Index {
			continue
		}
		attrs, err := nl.ParseRouteAttr(m[ans.Len():])
		if err != nil {
			return pi, err
		}
		for _, attr := range attrs {
			if attr.Attr.Type != syscall.IFLA_PROTINFO|syscall.NLA_F_NESTED {
				continue
			}
			infos, err := nl.ParseRouteAttr(attr.Value)
			if err != nil {
				return pi, err
			}
			var pi Protinfo
			for _, info := range infos {
				switch info.Attr.Type {
				case nl.IFLA_BRPORT_MODE:
					pi.Hairpin = byteToBool(info.Value[0])
				case nl.IFLA_BRPORT_GUARD:
					pi.Guard = byteToBool(info.Value[0])
				case nl.IFLA_BRPORT_FAST_LEAVE:
					pi.FastLeave = byteToBool(info.Value[0])
				case nl.IFLA_BRPORT_PROTECT:
					pi.RootBlock = byteToBool(info.Value[0])
				case nl.IFLA_BRPORT_LEARNING:
					pi.Learning = byteToBool(info.Value[0])
				case nl.IFLA_BRPORT_UNICAST_FLOOD:
					pi.Flood = byteToBool(info.Value[0])
				}
			}
			return pi, nil
		}
	}
	return pi, fmt.Errorf("Device with index %d not found", base.Index)
}
开发者ID:currantlabs,项目名称:netlink,代码行数:51,代码来源:protinfo_linux.go


示例7: LinkDel

// LinkDel deletes link device. Either Index or Name must be set in
// the link object for it to be deleted. The other values are ignored.
// Equivalent to: `ip link del $link`
func LinkDel(link Link) error {
	base := link.Attrs()

	ensureIndex(base)

	req := nl.NewNetlinkRequest(syscall.RTM_DELLINK, syscall.NLM_F_ACK)

	msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
	msg.Index = int32(base.Index)
	req.AddData(msg)

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:17,代码来源:link_linux.go


示例8: LinkSetDown

// LinkSetDown disables link device.
// Equivalent to: `ip link set $link down`
func LinkSetDown(link Link) error {
	base := link.Attrs()
	ensureIndex(base)
	req := nl.NewNetlinkRequest(syscall.RTM_NEWLINK, syscall.NLM_F_ACK)

	msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
	msg.Change = syscall.IFF_UP
	msg.Flags = 0 & ^syscall.IFF_UP
	msg.Index = int32(base.Index)
	req.AddData(msg)

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:16,代码来源:link_linux.go


示例9: LinkSetName

// LinkSetName sets the name of the link device.
// Equivalent to: `ip link set $link name $name`
func LinkSetName(link Link, name string) error {
	base := link.Attrs()
	ensureIndex(base)
	req := nl.NewNetlinkRequest(syscall.RTM_SETLINK, syscall.NLM_F_ACK)

	msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
	msg.Index = int32(base.Index)
	req.AddData(msg)

	data := nl.NewRtAttr(syscall.IFLA_IFNAME, []byte(name))
	req.AddData(data)

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:17,代码来源:link_linux.go


示例10: LinkSetHardwareAddr

// LinkSetHardwareAddr sets the hardware address of the link device.
// Equivalent to: `ip link set $link address $hwaddr`
func LinkSetHardwareAddr(link Link, hwaddr net.HardwareAddr) error {
	base := link.Attrs()
	ensureIndex(base)
	req := nl.NewNetlinkRequest(syscall.RTM_SETLINK, syscall.NLM_F_ACK)

	msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
	msg.Index = int32(base.Index)
	req.AddData(msg)

	data := nl.NewRtAttr(syscall.IFLA_ADDRESS, []byte(hwaddr))
	req.AddData(data)

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:17,代码来源:link_linux.go


示例11: FilterDel

// FilterDel will delete a filter from the system.
// Equivalent to: `tc filter del $filter`
func FilterDel(filter Filter) error {
	req := nl.NewNetlinkRequest(syscall.RTM_DELTFILTER, syscall.NLM_F_ACK)
	base := filter.Attrs()
	msg := &nl.TcMsg{
		Family:  nl.FAMILY_ALL,
		Ifindex: int32(base.LinkIndex),
		Handle:  base.Handle,
		Parent:  base.Parent,
		Info:    MakeHandle(base.Priority, nl.Swap16(base.Protocol)),
	}
	req.AddData(msg)

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:17,代码来源:filter_linux.go


示例12: LinkSetMTU

// LinkSetMTU sets the mtu of the link device.
// Equivalent to: `ip link set $link mtu $mtu`
func LinkSetMTU(link Link, mtu int) error {
	base := link.Attrs()
	ensureIndex(base)
	req := nl.NewNetlinkRequest(syscall.RTM_SETLINK, syscall.NLM_F_ACK)

	msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
	msg.Index = int32(base.Index)
	req.AddData(msg)

	b := make([]byte, 4)
	native.PutUint32(b, uint32(mtu))

	data := nl.NewRtAttr(syscall.IFLA_MTU, b)
	req.AddData(data)

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:20,代码来源:link_linux.go


示例13: setProtinfoAttr

func setProtinfoAttr(link Link, mode bool, attr int) error {
	base := link.Attrs()
	ensureIndex(base)
	req := nl.NewNetlinkRequest(syscall.RTM_SETLINK, syscall.NLM_F_ACK)

	msg := nl.NewIfInfomsg(syscall.AF_BRIDGE)
	msg.Index = int32(base.Index)
	req.AddData(msg)

	br := nl.NewRtAttr(syscall.IFLA_PROTINFO|syscall.NLA_F_NESTED, nil)
	nl.NewRtAttrChild(br, attr, boolToByte(mode))
	req.AddData(br)
	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	if err != nil {
		return err
	}
	return nil
}
开发者ID:currantlabs,项目名称:netlink,代码行数:18,代码来源:link_linux.go


示例14: XfrmStateAdd

// XfrmStateAdd will add an xfrm state to the system.
// Equivalent to: `ip xfrm state add $state`
func XfrmStateAdd(state *XfrmState) error {
	// A state with spi 0 can't be deleted so don't allow it to be set
	if state.Spi == 0 {
		return fmt.Errorf("Spi must be set when adding xfrm state.")
	}
	req := nl.NewNetlinkRequest(nl.XFRM_MSG_NEWSA, syscall.NLM_F_CREATE|syscall.NLM_F_EXCL|syscall.NLM_F_ACK)

	msg := &nl.XfrmUsersaInfo{}
	msg.Family = uint16(nl.GetIPFamily(state.Dst))
	msg.Id.Daddr.FromIP(state.Dst)
	msg.Saddr.FromIP(state.Src)
	msg.Id.Proto = uint8(state.Proto)
	msg.Mode = uint8(state.Mode)
	msg.Id.Spi = nl.Swap32(uint32(state.Spi))
	msg.Reqid = uint32(state.Reqid)
	msg.ReplayWindow = uint8(state.ReplayWindow)
	msg.Lft.SoftByteLimit = nl.XFRM_INF
	msg.Lft.HardByteLimit = nl.XFRM_INF
	msg.Lft.SoftPacketLimit = nl.XFRM_INF
	msg.Lft.HardPacketLimit = nl.XFRM_INF
	req.AddData(msg)

	if state.Auth != nil {
		out := nl.NewRtAttr(nl.XFRMA_ALG_AUTH_TRUNC, writeStateAlgoAuth(state.Auth))
		req.AddData(out)
	}
	if state.Crypt != nil {
		out := nl.NewRtAttr(nl.XFRMA_ALG_CRYPT, writeStateAlgo(state.Crypt))
		req.AddData(out)
	}
	if state.Encap != nil {
		encapData := make([]byte, nl.SizeofXfrmEncapTmpl)
		encap := nl.DeserializeXfrmEncapTmpl(encapData)
		encap.EncapType = uint16(state.Encap.Type)
		encap.EncapSport = nl.Swap16(uint16(state.Encap.SrcPort))
		encap.EncapDport = nl.Swap16(uint16(state.Encap.DstPort))
		encap.EncapOa.FromIP(state.Encap.OriginalAddress)
		out := nl.NewRtAttr(nl.XFRMA_ENCAP, encapData)
		req.AddData(out)
	}

	_, err := req.Execute(syscall.NETLINK_XFRM, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:46,代码来源:xfrm_state_linux.go


示例15: XfrmStateDel

// XfrmStateDel will delete an xfrm state from the system. Note that
// the Algos are ignored when matching the state to delete.
// Equivalent to: `ip xfrm state del $state`
func XfrmStateDel(state *XfrmState) error {
	req := nl.NewNetlinkRequest(nl.XFRM_MSG_DELSA, syscall.NLM_F_ACK)

	msg := &nl.XfrmUsersaId{}
	msg.Daddr.FromIP(state.Dst)
	msg.Family = uint16(nl.GetIPFamily(state.Dst))
	msg.Proto = uint8(state.Proto)
	msg.Spi = nl.Swap32(uint32(state.Spi))
	req.AddData(msg)

	saddr := nl.XfrmAddress{}
	saddr.FromIP(state.Src)
	srcdata := nl.NewRtAttr(nl.XFRMA_SRCADDR, saddr.Serialize())

	req.AddData(srcdata)

	_, err := req.Execute(syscall.NETLINK_XFRM, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:22,代码来源:xfrm_state_linux.go


示例16: classModify

func classModify(cmd, flags int, class Class) error {
	req := nl.NewNetlinkRequest(cmd, flags|syscall.NLM_F_ACK)
	base := class.Attrs()
	msg := &nl.TcMsg{
		Family:  nl.FAMILY_ALL,
		Ifindex: int32(base.LinkIndex),
		Handle:  base.Handle,
		Parent:  base.Parent,
	}
	req.AddData(msg)

	if cmd != syscall.RTM_DELTCLASS {
		if err := classPayload(req, class); err != nil {
			return err
		}
	}
	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:19,代码来源:class_linux.go


示例17: qdiscModify

func qdiscModify(cmd, flags int, qdisc Qdisc) error {
	req := nl.NewNetlinkRequest(cmd, flags|syscall.NLM_F_ACK)
	base := qdisc.Attrs()
	msg := &nl.TcMsg{
		Family:  nl.FAMILY_ALL,
		Ifindex: int32(base.LinkIndex),
		Handle:  base.Handle,
		Parent:  base.Parent,
	}
	req.AddData(msg)

	// When deleting don't bother building the rest of the netlink payload
	if cmd != syscall.RTM_DELQDISC {
		if err := qdiscPayload(req, qdisc); err != nil {
			return err
		}
	}

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:21,代码来源:qdisc_linux.go


示例18: LinkByAlias

// LinkByAlias finds a link by its alias and returns a pointer to the object.
// If there are multiple links with the alias it returns the first one
func LinkByAlias(alias string) (Link, error) {
	if lookupByDump {
		return linkByAliasDump(alias)
	}

	req := nl.NewNetlinkRequest(syscall.RTM_GETLINK, syscall.NLM_F_ACK)

	msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
	req.AddData(msg)

	nameData := nl.NewRtAttr(syscall.IFLA_IFALIAS, nl.ZeroTerminated(alias))
	req.AddData(nameData)

	link, err := execGetLink(req)
	if err == syscall.EINVAL {
		// older kernels don't support looking up via IFLA_IFALIAS
		// so fall back to dumping all links
		lookupByDump = true
		return linkByAliasDump(alias)
	}

	return link, err
}
开发者ID:currantlabs,项目名称:netlink,代码行数:25,代码来源:link_linux.go


示例19: LinkList

// LinkList gets a list of link devices.
// Equivalent to: `ip link show`
func LinkList() ([]Link, error) {
	// NOTE(vish): This duplicates functionality in net/iface_linux.go, but we need
	//             to get the message ourselves to parse link type.
	req := nl.NewNetlinkRequest(syscall.RTM_GETLINK, syscall.NLM_F_DUMP)

	msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
	req.AddData(msg)

	msgs, err := req.Execute(syscall.NETLINK_ROUTE, syscall.RTM_NEWLINK)
	if err != nil {
		return nil, err
	}

	var res []Link
	for _, m := range msgs {
		link, err := linkDeserialize(m)
		if err != nil {
			return nil, err
		}
		res = append(res, link)
	}

	return res, nil
}
开发者ID:currantlabs,项目名称:netlink,代码行数:26,代码来源:link_linux.go


示例20: RouteGet

// RouteGet gets a route to a specific destination from the host system.
// Equivalent to: 'ip route get'.
func RouteGet(destination net.IP) ([]Route, error) {
	req := nl.NewNetlinkRequest(syscall.RTM_GETROUTE, syscall.NLM_F_REQUEST)
	family := nl.GetIPFamily(destination)
	var destinationData []byte
	var bitlen uint8
	if family == FAMILY_V4 {
		destinationData = destination.To4()
		bitlen = 32
	} else {
		destinationData = destination.To16()
		bitlen = 128
	}
	msg := &nl.RtMsg{}
	msg.Family = uint8(family)
	msg.Dst_len = bitlen
	req.AddData(msg)

	rtaDst := nl.NewRtAttr(syscall.RTA_DST, destinationData)
	req.AddData(rtaDst)

	msgs, err := req.Execute(syscall.NETLINK_ROUTE, syscall.RTM_NEWROUTE)
	if err != nil {
		return nil, err
	}

	var res []Route
	for _, m := range msgs {
		route, err := deserializeRoute(m)
		if err != nil {
			return nil, err
		}
		res = append(res, route)
	}
	return res, nil

}
开发者ID:currantlabs,项目名称:netlink,代码行数:38,代码来源:route_linux.go



注:本文中的github.com/currantlabs/netlink/nl.NewNetlinkRequest函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Golang nl.NetlinkRequest类代码示例发布时间:2022-05-23
下一篇:
Golang gatt.Peripheral类代码示例发布时间:2022-05-23
热门推荐
热门话题
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap