本文整理汇总了Golang中github.com/cpmech/gosl/plt.Subplot函数的典型用法代码示例。如果您正苦于以下问题:Golang Subplot函数的具体用法?Golang Subplot怎么用?Golang Subplot使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了Subplot函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。
示例1: PlotStress
// PlotStress plots stresses along y=0 (horizontal line) and x=0 (vertical line)
func (o *PlateHole) PlotStress(t, L float64, npts int) {
d := utl.LinSpace(o.r, L, npts)
Sx := make([]float64, npts)
Sy := make([]float64, npts)
Sxy := make([]float64, npts)
plt.Subplot(2, 1, 1)
for i := 0; i < npts; i++ {
Sx[i], Sy[i], _, Sxy[i] = o.Stress(t, []float64{d[i], 0}) // y=0
}
plt.Plot(d, Sx, "color='r',label='$\\sigma_x$ @ $y=0$'")
plt.Plot(d, Sy, "color='g',label='$\\sigma_y$ @ $y=0$'")
plt.Plot(d, Sxy, "color='b',label='$\\sigma_{xy}$ @ $y=0$'")
plt.Gll("$x$", "stresses", "")
plt.Subplot(2, 1, 2)
for i := 0; i < npts; i++ {
Sx[i], Sy[i], _, Sxy[i] = o.Stress(t, []float64{0, d[i]}) // x=0
}
plt.Plot(Sx, d, "color='r',label='$\\sigma_x$ @ $x=0$'")
plt.Plot(Sy, d, "color='g',label='$\\sigma_y$ @ $x=0$'")
plt.Plot(Sxy, d, "color='b',label='$\\sigma_{xy}$ @ $x=0$'")
plt.Gll("stresses", "$y$", "")
}
开发者ID:PaddySchmidt,项目名称:gofem,代码行数:26,代码来源:plate_hole.go
示例2: PlotTwoNurbs
// PlotTwoNurbs plots two NURBS for comparison
func PlotTwoNurbs(dirout, fn string, b, c *Nurbs, npts int, ids bool, extra func()) {
plt.Reset()
if io.FnExt(fn) == ".eps" {
plt.SetForEps(1.5, 500)
} else {
plt.SetForPng(1.5, 500, 150)
}
plt.Subplot(3, 1, 1)
b.DrawCtrl2d(ids, "", "")
b.DrawElems2d(npts, ids, "", "")
if extra != nil {
extra()
}
plt.Equal()
plt.Subplot(3, 1, 2)
c.DrawCtrl2d(ids, "", "")
c.DrawElems2d(npts, ids, "", "")
plt.Equal()
plt.Subplot(3, 1, 3)
b.DrawElems2d(npts, ids, ", lw=3", "")
c.DrawElems2d(npts, ids, ", color='red', marker='+', markevery=10", "color='green', size=7, va='bottom'")
plt.Equal()
plt.SaveD(dirout, fn)
}
开发者ID:PaddySchmidt,项目名称:gosl,代码行数:29,代码来源:plotnurbs.go
示例3: Test_functions03
func Test_functions03(tst *testing.T) {
//verbose()
chk.PrintTitle("functions03")
eps := 1e-2
f := func(x float64) float64 { return Sabs(x, eps) }
ff := func(x float64) float64 { return SabsD1(x, eps) }
np := 401
//x := utl.LinSpace(-5e5, 5e5, np)
//x := utl.LinSpace(-5e2, 5e2, np)
x := utl.LinSpace(-5e1, 5e1, np)
Y := make([]float64, np)
y := make([]float64, np)
g := make([]float64, np)
h := make([]float64, np)
tolg, tolh := 1e-6, 1e-5
with_err := false
for i := 0; i < np; i++ {
Y[i] = math.Abs(x[i])
y[i] = Sabs(x[i], eps)
g[i] = SabsD1(x[i], eps)
h[i] = SabsD2(x[i], eps)
gnum := numderiv(f, x[i])
hnum := numderiv(ff, x[i])
errg := math.Abs(g[i] - gnum)
errh := math.Abs(h[i] - hnum)
clrg, clrh := "[1;32m", "[1;32m"
if errg > tolg {
clrg, with_err = "[1;31m", true
}
if errh > tolh {
clrh, with_err = "[1;31m", true
}
io.Pf("errg = %s%23.15e errh = %s%23.15e[0m\n", clrg, errg, clrh, errh)
}
if with_err {
chk.Panic("errors found")
}
if false {
//if true {
plt.Subplot(3, 1, 1)
plt.Plot(x, y, "'k--', label='abs'")
plt.Plot(x, y, "'b-', label='sabs'")
plt.Gll("x", "y", "")
plt.Subplot(3, 1, 2)
plt.Plot(x, g, "'b-', label='sabs'")
plt.Gll("x", "dy/dx", "")
plt.Subplot(3, 1, 3)
plt.Plot(x, h, "'b-', label='sabs'")
plt.Gll("x", "d2y/dx2", "")
plt.Show()
}
}
开发者ID:PaddySchmidt,项目名称:gosl,代码行数:60,代码来源:t_functions_test.go
示例4: PlotFltFltContour
// PlotFltFlt plots flt-flt contour
// use iFlt==-1 || jFlt==-1 to plot all combinations
func (o *Optimiser) PlotFltFltContour(sols0 []*Solution, iFlt, jFlt, iOva int, pp *PlotParams) {
best, _ := GetBestFeasible(o, iOva)
plotAll := iFlt < 0 || jFlt < 0
plotCommands := func(i, j int) {
o.PlotContour(i, j, iOva, pp)
if sols0 != nil {
o.PlotAddFltFlt(i, j, sols0, &pp.FmtSols0)
}
o.PlotAddFltFlt(i, j, o.Solutions, &pp.FmtSols)
if best != nil {
plt.PlotOne(best.Flt[i], best.Flt[j], pp.FmtBest.GetArgs(""))
}
if pp.Extra != nil {
pp.Extra()
}
if pp.AxEqual {
plt.Equal()
}
}
if plotAll {
idx := 1
ncol := o.Nflt - 1
for row := 0; row < o.Nflt; row++ {
idx += row
for col := row + 1; col < o.Nflt; col++ {
plt.Subplot(ncol, ncol, idx)
plt.SplotGap(0.0, 0.0)
plotCommands(col, row)
if col > row+1 {
plt.SetXnticks(0)
plt.SetYnticks(0)
} else {
plt.Gll(io.Sf("$x_{%d}$", col), io.Sf("$x_{%d}$", row), "leg=0")
}
idx++
}
}
idx = ncol*(ncol-1) + 1
plt.Subplot(ncol, ncol, idx)
plt.AxisOff()
// TODO: fix formatting of open marker, add star to legend
plt.DrawLegend([]plt.Fmt{pp.FmtSols0, pp.FmtSols, pp.FmtBest}, 8, "center", false, "")
} else {
plotCommands(iFlt, jFlt)
if pp.Xlabel == "" {
plt.Gll(io.Sf("$x_{%d}$", iFlt), io.Sf("$x_{%d}$", jFlt), pp.LegPrms)
} else {
plt.Gll(pp.Xlabel, pp.Ylabel, pp.LegPrms)
}
}
plt.SaveD(pp.DirOut, pp.FnKey+pp.FnExt)
}
开发者ID:cpmech,项目名称:goga,代码行数:54,代码来源:plotting.go
示例5: Plot
// Plot plot results
func Plot(dirout, fn string, res *Results, yfcn Cb_ycorr, xa, xb float64, argsAna, argsNum string, extra func()) {
// data
if res == nil {
return
}
ndim := len(res.Y)
if ndim < 1 {
return
}
// closed-form solution
var xc []float64
var Yc [][]float64
if yfcn != nil {
np := 101
dx := (xb - xa) / float64(np-1)
xc = make([]float64, np)
Yc = utl.DblsAlloc(np, ndim)
for i := 0; i < np; i++ {
xc[i] = xa + dx*float64(i)
yfcn(Yc[i], xc[i])
}
}
// plot
if argsAna == "" {
argsAna = "'y-', lw=6, label='analytical', clip_on=0"
}
if argsNum == "" {
argsNum = "'b-', marker='.', lw=1, clip_on=0"
}
for j := 0; j < ndim; j++ {
plt.Subplot(ndim+1, 1, j+1)
if yfcn != nil {
plt.Plot(xc, Yc[j], argsAna)
}
plt.Plot(res.X, res.Y[j], argsNum+","+io.Sf("label='%s'", res.Method))
plt.Gll("$x$", "$y$", "")
}
plt.Subplot(ndim+1, 1, ndim+1)
plt.Plot(res.X, res.Dx, io.Sf("'b-', marker='.', lw=1, clip_on=0, label='%s'", res.Method))
plt.SetYlog()
plt.Gll("$x$", "$\\log(\\delta x)$", "")
// write file
if extra != nil {
extra()
}
plt.SaveD(dirout, fn)
}
开发者ID:yunpeng1,项目名称:gosl,代码行数:52,代码来源:plotting.go
示例6: PlotT
// PlotT plots F, G and H for varying t and fixed coordinates x
func PlotT(o Func, dirout, fname string, t0, tf float64, xcte []float64, np int, args string, withG, withH, save, show bool, extra func()) {
t := utl.LinSpace(t0, tf, np)
y := make([]float64, np)
for i := 0; i < np; i++ {
y[i] = o.F(t[i], xcte)
}
var g, h []float64
nrow := 1
if withG {
g = make([]float64, np)
for i := 0; i < np; i++ {
g[i] = o.G(t[i], xcte)
}
nrow += 1
}
if withH {
h = make([]float64, np)
for i := 0; i < np; i++ {
h[i] = o.H(t[i], xcte)
}
nrow += 1
}
os.MkdirAll(dirout, 0777)
if withG || withH {
plt.Subplot(nrow, 1, 1)
}
plt.Plot(t, y, args)
if extra != nil {
extra()
}
plt.Gll("t", "y", "")
pidx := 2
if withG {
plt.Subplot(nrow, 1, pidx)
plt.Plot(t, g, args)
plt.Gll("t", "dy/dt", "")
pidx += 1
}
if withH {
plt.Subplot(nrow, 1, pidx)
plt.Plot(t, h, args)
plt.Gll("t", "d2y/dt2", "")
}
if save {
plt.Save(dirout + "/" + fname)
}
if show {
plt.Show()
}
}
开发者ID:PaddySchmidt,项目名称:gosl,代码行数:51,代码来源:func.go
示例7: do_plot_nurbs_refined
func do_plot_nurbs_refined(b, c *Nurbs) {
plt.SetForEps(1.5, 400)
plt.Subplot(3, 1, 1)
b.DrawCtrl2D(true)
b.DrawElems2D(21, true, "", "")
plt.Equal()
plt.Subplot(3, 1, 2)
c.DrawCtrl2D(true)
c.DrawElems2D(21, true, "", "")
plt.Equal()
plt.Subplot(3, 1, 3)
b.DrawElems2D(21, true, ", lw=3", "")
c.DrawElems2D(21, true, ", color='red', marker='+', markevery=10", "color='magenta', size=8, va='bottom'")
plt.Equal()
}
开发者ID:PatrickSchm,项目名称:gosl,代码行数:17,代码来源:t_nurbs_test.go
示例8: Subplot
// subplot sets subplot
func (o *Plotter) Subplot() {
if o.Split {
plt.Clf()
return
}
plt.Subplot(o.Nrow, o.Ncol, o.Pidx)
o.Pidx += 1
}
开发者ID:PatrickSchm,项目名称:gofem,代码行数:9,代码来源:plotter.go
示例9: plot_normal
func plot_normal(μ, σ float64) {
var dist DistNormal
dist.Init(&VarData{M: μ, S: σ})
n := 101
x := utl.LinSpace(-2, 2, n)
y := make([]float64, n)
Y := make([]float64, n)
for i := 0; i < n; i++ {
y[i] = dist.Pdf(x[i])
Y[i] = dist.Cdf(x[i])
}
plt.Subplot(2, 1, 1)
plt.Plot(x, y, io.Sf("clip_on=0,zorder=10,label=r'$\\mu=%g,\\;\\sigma=%g$'", μ, σ))
plt.Gll("$x$", "$f(x)$", "leg_out=1, leg_ncol=2")
plt.Subplot(2, 1, 2)
plt.Plot(x, Y, io.Sf("clip_on=0,zorder=10,label=r'$\\mu=%g,\\;\\sigma=%g$'", μ, σ))
plt.Gll("$x$", "$F(x)$", "leg_out=1, leg_ncol=2")
}
开发者ID:PaddySchmidt,项目名称:gosl,代码行数:20,代码来源:t_distnormal_test.go
示例10: Draw
// Draw draws or save figure with plot
// dirout -- directory to save figure
// fname -- file name; e.g. myplot.eps or myplot.png. Use "" to skip saving
// show -- shows figure
// extra -- is called just after Subplot command and before any plotting
// Note: subplots will be split if using 'eps' files
func Draw(dirout, fname string, show bool, extra ExtraPlt) {
var fnk string // filename key
var ext string // extension
var eps bool // is eps figure
if fname != "" {
fnk = io.FnKey(fname)
ext = io.FnExt(fname)
eps = ext == ".eps"
}
nplots := len(Splots)
nr, nc := utl.BestSquare(nplots)
var k int
for i := 0; i < nr; i++ {
for j := 0; j < nc; j++ {
if !eps {
plt.Subplot(nr, nc, k+1)
}
if extra != nil {
extra(i+1, j+1, nplots)
}
if Splots[k].Title != "" {
plt.Title(Splots[k].Title, Splots[k].Topts)
}
data := Splots[k].Data
for _, d := range data {
if d.Style.L == "" {
d.Style.L = d.Alias
}
x, y := d.X, d.Y
if math.Abs(Splots[k].Xscale) > 0 {
x = make([]float64, len(d.X))
la.VecCopy(x, Splots[k].Xscale, d.X)
}
if math.Abs(Splots[k].Yscale) > 0 {
y = make([]float64, len(d.Y))
la.VecCopy(y, Splots[k].Yscale, d.Y)
}
plt.Plot(x, y, d.Style.GetArgs("clip_on=0"))
}
plt.Gll(Splots[k].Xlbl, Splots[k].Ylbl, Splots[k].GllArgs)
if eps {
savefig(dirout, fnk, ext, k)
plt.Clf()
}
k += 1
}
}
if !eps && fname != "" {
savefig(dirout, fnk, ext, -1)
}
if show {
plt.Show()
}
}
开发者ID:PatrickSchm,项目名称:gofem,代码行数:60,代码来源:plotting.go
示例11: plot_frechet
func plot_frechet(l, c, a float64, xmin, xmax float64) {
var dist DistFrechet
dist.Init(&VarData{L: l, C: c, A: a})
n := 101
x := utl.LinSpace(xmin, xmax, n)
y := make([]float64, n)
Y := make([]float64, n)
for i := 0; i < n; i++ {
y[i] = dist.Pdf(x[i])
Y[i] = dist.Cdf(x[i])
}
plt.Subplot(2, 1, 1)
plt.Plot(x, y, io.Sf("clip_on=0,zorder=10,label=r'$(%g,%g,%g)$'", l, c, a))
plt.Gll("$x$", "$f(x)$", "leg_out=1, leg_ncol=4, leg_hlen=1")
plt.SetYnticks(11)
plt.Subplot(2, 1, 2)
plt.Plot(x, Y, io.Sf("clip_on=0,zorder=10,label=r'$(%g,%g,%g)$'", l, c, a))
plt.Gll("$x$", "$F(x)$", "leg_out=1, leg_ncol=4, leg_hlen=1")
}
开发者ID:yunpeng1,项目名称:gosl,代码行数:21,代码来源:t_dist_frechet_test.go
示例12: plot_uniform
func plot_uniform(A, B float64, xmin, xmax float64) {
var dist DistUniform
dist.Init(&VarData{Min: A, Max: B})
n := 101
x := utl.LinSpace(xmin, xmax, n)
y := make([]float64, n)
Y := make([]float64, n)
for i := 0; i < n; i++ {
y[i] = dist.Pdf(x[i])
Y[i] = dist.Cdf(x[i])
}
plt.Subplot(2, 1, 1)
plt.Plot(x, y, io.Sf("clip_on=0,zorder=10,label=r'$(%g,%g)$'", A, B))
plt.Gll("$x$", "$f(x)$", "leg_out=1, leg_ncol=4, leg_hlen=1")
plt.SetYnticks(11)
plt.Subplot(2, 1, 2)
plt.Plot(x, Y, io.Sf("clip_on=0,zorder=10,label=r'$(%g,%g)$'", A, B))
plt.Gll("$x$", "$F(x)$", "leg_out=1, leg_ncol=4, leg_hlen=1")
}
开发者ID:yunpeng1,项目名称:gosl,代码行数:21,代码来源:t_dist_uniform_test.go
示例13: PlotNurbsDerivs
// PlotNurbsDerivs plots derivatives of basis functions la and lb
func PlotNurbsDerivs(dirout, fn string, b *Nurbs, la, lb int) {
npts := 41
plt.Reset()
if io.FnExt(fn) == ".eps" {
plt.SetForEps(1.5, 500)
} else {
plt.SetForPng(1.5, 600, 150)
}
plt.Subplot(4, 2, 1)
t0 := time.Now()
b.PlotDeriv(la, 0, "", npts, 0) // 0 => CalcBasisAndDerivs
io.Pfcyan("time elapsed (calcbasis) = %v\n", time.Now().Sub(t0))
plt.Equal()
plt.Subplot(4, 2, 2)
t0 = time.Now()
b.PlotDeriv(la, 0, "", npts, 1) // 1 => NumericalDeriv
io.Pfcyan("time elapsed (numerical) = %v\n", time.Now().Sub(t0))
plt.Equal()
plt.Subplot(4, 2, 3)
b.PlotDeriv(la, 1, "", npts, 0) // 0 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(4, 2, 4)
b.PlotDeriv(la, 1, "", npts, 1) // 0 => NumericalDeriv
plt.Equal()
plt.Subplot(4, 2, 5)
b.PlotDeriv(lb, 0, "", npts, 0) // 0 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(4, 2, 6)
b.PlotDeriv(lb, 0, "", npts, 1) // 0 => NumericalDeriv
plt.Equal()
plt.Subplot(4, 2, 7)
b.PlotDeriv(lb, 1, "", npts, 0) // 0 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(4, 2, 8)
b.PlotDeriv(lb, 1, "", npts, 1) // 0 => NumericalDeriv
plt.Equal()
plt.SaveD(dirout, fn)
}
开发者ID:PaddySchmidt,项目名称:gosl,代码行数:48,代码来源:plotnurbs.go
示例14: Test_bspline01
func Test_bspline01(tst *testing.T) {
//verbose()
chk.PrintTitle("bspline01")
var s1 Bspline
T1 := []float64{0, 0, 0, 1, 1, 1}
s1.Init(T1, 2)
s1.SetControl([][]float64{{0, 0}, {0.5, 1}, {1, 0}})
var s2 Bspline
T2 := []float64{0, 0, 0, 0.5, 1, 1, 1}
s2.Init(T2, 2)
s2.SetControl([][]float64{{0, 0}, {0.25, 0.5}, {0.75, 0.5}, {1, 0}})
if chk.Verbose {
npts := 201
plt.SetForPng(1.5, 600, 150)
plt.SplotGap(0.2, 0.4)
str0 := ",lw=2"
str1 := ",ls='none',marker='+',color='cyan',markevery=10"
str2 := ",ls='none',marker='x',markevery=10"
str3 := ",ls='none',marker='+',markevery=10"
str4 := ",ls='none',marker='4',markevery=10"
plt.Subplot(3, 2, 1)
s1.Draw2d(str0, "", npts, 0) // 0 => CalcBasis
s1.Draw2d(str1, "", npts, 1) // 1 => RecursiveBasis
plt.Subplot(3, 2, 2)
plt.SetAxis(0, 1, 0, 1)
s2.Draw2d(str0, "", npts, 0) // 0 => CalcBasis
s2.Draw2d(str1, "", npts, 1) // 1 => RecursiveBasis
plt.Subplot(3, 2, 3)
s1.PlotBasis("", npts, 0) // 0 => CalcBasis
s1.PlotBasis(str2, npts, 1) // 1 => CalcBasisAndDerivs
s1.PlotBasis(str3, npts, 2) // 2 => RecursiveBasis
plt.Subplot(3, 2, 4)
s2.PlotBasis("", npts, 0) // 0 => CalcBasis
s2.PlotBasis(str2, npts, 1) // 1 => CalcBasisAndDerivs
s2.PlotBasis(str3, npts, 2) // 2 => RecursiveBasis
plt.Subplot(3, 2, 5)
s1.PlotDerivs("", npts, 0) // 0 => CalcBasisAndDerivs
s1.PlotDerivs(str4, npts, 1) // 1 => NumericalDeriv
plt.Subplot(3, 2, 6)
s2.PlotDerivs("", npts, 0) // 0 => CalcBasisAndDerivs
s2.PlotDerivs(str4, npts, 1) // 1 => NumericalDeriv
plt.SaveD("/tmp/gosl/gm", "bspline01.png")
}
}
开发者ID:PaddySchmidt,项目名称:gosl,代码行数:56,代码来源:t_bspline_test.go
示例15: Test_dist_lognormal_03
func Test_dist_lognormal_03(tst *testing.T) {
//verbose()
chk.PrintTitle("dist_lognormal_03. random numbers")
μ := 1.0
σ := 0.25
nsamples := 1000
X := make([]float64, nsamples)
for i := 0; i < nsamples; i++ {
X[i] = Lognormal(μ, σ)
}
nstations := 41
xmin := 0.0
xmax := 3.0
dx := (xmax - xmin) / float64(nstations-1)
var hist Histogram
hist.Stations = utl.LinSpace(xmin, xmax, nstations)
hist.Count(X, true)
prob := make([]float64, nstations)
for i := 0; i < nstations-1; i++ {
prob[i] = float64(hist.Counts[i]) / (float64(nsamples) * dx)
}
io.Pf(TextHist(hist.GenLabels("%.3f"), hist.Counts, 60))
io.Pforan("dx = %v\n", dx)
area := 0.0
for i := 0; i < nstations-1; i++ {
area += dx * prob[i]
}
io.Pforan("area = %v\n", area)
chk.Scalar(tst, "area", 1e-15, area, 1)
if chk.Verbose {
plt.SetForEps(1.5, 300)
plot_lognormal(μ, σ)
plt.Subplot(2, 1, 1)
hist.PlotDensity(nil, "")
plt.SaveD("/tmp/gosl", "rnd_dist_lognormal_03.eps")
}
}
开发者ID:yunpeng1,项目名称:gosl,代码行数:46,代码来源:t_dist_lognormal_test.go
示例16: PlotNurbsBasis
// PlotNurbsBasis plots basis functions la and lb
func PlotNurbsBasis(dirout, fn string, b *Nurbs, la, lb int) {
npts := 41
plt.Reset()
if io.FnExt(fn) == ".eps" {
plt.SetForEps(1.5, 500)
} else {
plt.SetForPng(1.5, 600, 150)
}
plt.Subplot(3, 2, 1)
b.DrawCtrl2d(false, "", "")
b.DrawElems2d(npts, false, "", "")
t0 := time.Now()
b.PlotBasis(la, "", 11, 0) // 0 => CalcBasis
io.Pfcyan("time elapsed (calcbasis) = %v\n", time.Now().Sub(t0))
plt.Equal()
plt.Subplot(3, 2, 2)
b.DrawCtrl2d(false, "", "")
b.DrawElems2d(npts, false, "", "")
b.PlotBasis(lb, "", 11, 0) // 0 => CalcBasis
plt.Equal()
plt.Subplot(3, 2, 3)
b.DrawCtrl2d(false, "", "")
b.DrawElems2d(npts, false, "", "")
b.PlotBasis(la, "", 11, 1) // 1 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(3, 2, 4)
b.DrawCtrl2d(false, "", "")
b.DrawElems2d(npts, false, "", "")
b.PlotBasis(lb, "", 11, 1) // 1 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(3, 2, 5)
b.DrawCtrl2d(false, "", "")
b.DrawElems2d(npts, false, "", "")
t0 = time.Now()
b.PlotBasis(la, "", 11, 2) // 2 => RecursiveBasis
io.Pfcyan("time elapsed (recursive) = %v\n", time.Now().Sub(t0))
plt.Equal()
plt.Subplot(3, 2, 6)
b.DrawCtrl2d(false, "", "")
b.DrawElems2d(npts, false, "", "")
b.PlotBasis(lb, "", 11, 2) // 2 => RecursiveBasis
plt.Equal()
plt.SaveD(dirout, fn)
}
开发者ID:PaddySchmidt,项目名称:gosl,代码行数:52,代码来源:plotnurbs.go
示例17: do_plot_nurbs_derivs
func do_plot_nurbs_derivs(b *Nurbs, la, lb int) {
np := 11
plt.SetForEps(1.5, 500)
plt.Subplot(4, 2, 1)
t0 := time.Now()
b.PlotDeriv(la, 0, "", np, 0) // 0 => CalcBasisAndDerivs
io.Pfcyan("time elapsed (calcbasis) = %v\n", time.Now().Sub(t0))
plt.Equal()
plt.Subplot(4, 2, 2)
t0 = time.Now()
b.PlotDeriv(la, 0, "", np, 1) // 1 => NumericalDeriv
io.Pfcyan("time elapsed (numerical) = %v\n", time.Now().Sub(t0))
plt.Equal()
plt.Subplot(4, 2, 3)
b.PlotDeriv(la, 1, "", np, 0) // 0 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(4, 2, 4)
b.PlotDeriv(la, 1, "", np, 1) // 0 => NumericalDeriv
plt.Equal()
plt.Subplot(4, 2, 5)
b.PlotDeriv(lb, 0, "", np, 0) // 0 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(4, 2, 6)
b.PlotDeriv(lb, 0, "", np, 1) // 0 => NumericalDeriv
plt.Equal()
plt.Subplot(4, 2, 7)
b.PlotDeriv(lb, 1, "", np, 0) // 0 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(4, 2, 8)
b.PlotDeriv(lb, 1, "", np, 1) // 0 => NumericalDeriv
plt.Equal()
}
开发者ID:PatrickSchm,项目名称:gosl,代码行数:40,代码来源:t_nurbs_test.go
示例18: Test_fun01
func Test_fun01(tst *testing.T) {
//verbose()
chk.PrintTitle("fun01. Decreasing Reference Model")
ya := 1.0
yb := -0.5
λ1 := 1.0
o, err := New("ref-dec-gen", []*Prm{
&Prm{N: "bet", V: 5.0},
&Prm{N: "a", V: -λ1},
&Prm{N: "b", V: -1.0},
&Prm{N: "c", V: ya},
&Prm{N: "A", V: 0.0},
&Prm{N: "B", V: λ1},
&Prm{N: "xini", V: 0.0},
&Prm{N: "yini", V: yb},
})
if err != nil {
tst.Errorf("test failed: %v\n", err)
return
}
tmax := 3.0
xcte := []float64{0, 0, 0}
if chk.Verbose {
plt.SetForPng(1.2, 400, 150)
PlotT(o, "", "", 0.0, tmax, xcte, 201, "", "", "", "", "label='f'", "label='g'", "label='h'")
plt.Subplot(3, 1, 1)
plt.Plot([]float64{0, tmax}, []float64{ya, ya - λ1*tmax}, "'k-'")
plt.Equal()
plt.SaveD("/tmp/gosl/fun", "ref-dec-gen.png")
}
//
sktol := 1e-10
dtol := 1e-10
dtol2 := 1e-10
ver := chk.Verbose
CheckDerivT(tst, o, 0.0, tmax, xcte, 11, nil, sktol, dtol, dtol2, ver)
}
开发者ID:yunpeng1,项目名称:gosl,代码行数:41,代码来源:t_fun_test.go
示例19: do_plot_nurbs_basis
func do_plot_nurbs_basis(b *Nurbs, la, lb int) {
npts := 21
plt.SetForEps(1.2, 500)
plt.Subplot(3, 2, 1)
b.DrawCtrl2D(false)
b.DrawElems2D(npts, false, "", "")
t0 := time.Now()
b.PlotBasis(la, "", 11, 0) // 0 => CalcBasis
io.Pfcyan("time elapsed (calcbasis) = %v\n", time.Now().Sub(t0))
plt.Equal()
plt.Subplot(3, 2, 2)
b.DrawCtrl2D(false)
b.DrawElems2D(npts, false, "", "")
b.PlotBasis(lb, "", 11, 0) // 0 => CalcBasis
plt.Equal()
plt.Subplot(3, 2, 3)
b.DrawCtrl2D(false)
b.DrawElems2D(npts, false, "", "")
b.PlotBasis(la, "", 11, 1) // 1 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(3, 2, 4)
b.DrawCtrl2D(false)
b.DrawElems2D(npts, false, "", "")
b.PlotBasis(lb, "", 11, 1) // 1 => CalcBasisAndDerivs
plt.Equal()
plt.Subplot(3, 2, 5)
b.DrawCtrl2D(false)
b.DrawElems2D(npts, false, "", "")
t0 = time.Now()
b.PlotBasis(la, "", 11, 2) // 2 => RecursiveBasis
io.Pfcyan("time elapsed (recursive) = %v\n", time.Now().Sub(t0))
plt.Equal()
plt.Subplot(3, 2, 6)
b.DrawCtrl2D(false)
b.DrawElems2D(npts, false, "", "")
b.PlotBasis(lb, "", 11, 2) // 2 => RecursiveBasis
plt.Equal()
}
开发者ID:PatrickSchm,项目名称:gosl,代码行数:44,代码来源:t_nurbs_test.go
示例20: Test_bspline03
func Test_bspline03(tst *testing.T) {
//verbose()
chk.PrintTitle("bspline03")
// 0 1 2 3 4 5 6 7 8 9 10
T := []float64{0, 0, 0, 1, 2, 3, 4, 4, 5, 5, 5}
var s Bspline
s.Init(T, 2)
s.SetControl([][]float64{{0, 0}, {0.5, 1}, {1, 0}, {1.5, 0}, {2, 1}, {2.5, 1}, {3, 0.5}, {3.5, 0}})
// analytical derivatives
s.CalcBasisAndDerivs(3.99)
io.Pfpink("ana: dNdt(t=3.99, i=5) = %v\n", s.GetDeriv(5))
io.Pfpink("ana: dNdt(t=3.99, i=6) = %v\n", s.GetDeriv(6))
io.Pfpink("ana: dNdt(t=3.99, i=7) = %v\n", s.GetDeriv(7))
s.CalcBasisAndDerivs(4.0)
io.Pforan("ana: dNdt(t=4.00, i=5) = %v\n", s.GetDeriv(5))
io.Pforan("ana: dNdt(t=4.00, i=6) = %v\n", s.GetDeriv(6))
io.Pforan("ana: dNdt(t=4.00, i=7) = %v\n", s.GetDeriv(7))
// numerical derivatives
io.Pfcyan("num: dNdt(t=3.99, i=5) = %v\n", s.NumericalDeriv(3.99, 5))
io.Pfcyan("num: dNdt(t=3.99, i=6) = %v\n", s.NumericalDeriv(3.99, 6))
io.Pfcyan("num: dNdt(t=3.99, i=7) = %v\n", s.NumericalDeriv(3.99, 7))
io.Pfblue2("num: dNdt(t=4.00, i=5) = %v\n", s.NumericalDeriv(4.00, 5))
io.Pfblue2("num: dNdt(t=4.00, i=6) = %v\n", s.NumericalDeriv(4.00, 6))
io.Pfblue2("num: dNdt(t=4.00, i=7) = %v\n", s.NumericalDeriv(4.00, 7))
ver := false
tol := 1e-5
tt := utl.LinSpace(0, 5, 11)
numd := make([]float64, s.NumBasis())
anad := make([]float64, s.NumBasis())
for _, t := range tt {
for i := 0; i < s.NumBasis(); i++ {
s.CalcBasisAndDerivs(t)
anad[i] = s.GetDeriv(i)
numd[i] = s.NumericalDeriv(t, i)
// numerical fails @ 4 [4,5,6]
if t == 4 {
numd[4] = anad[4]
numd[5] = anad[5]
numd[6] = anad[6]
}
chk.PrintAnaNum(io.Sf("i=%d t=%v", i, t), tol, anad[i], numd[i], ver)
}
chk.Vector(tst, io.Sf("derivs @ %v", t), tol, numd, anad)
}
if chk.Verbose {
npts := 201
plt.SetForPng(1.5, 600, 150)
plt.SplotGap(0, 0.3)
str0 := ",lw=2"
str1 := ",ls='none',marker='+',color='cyan',markevery=10"
str2 := ",ls='none',marker='x',markevery=10"
str3 := ",ls='none',marker='+',markevery=10"
str4 := ",ls='none',marker='4',markevery=10"
plt.Subplot(3, 1, 1)
s.Draw2d(str0, "", npts, 0) // 0 => CalcBasis
s.Draw2d(str1, "", npts, 1) // 1 => RecursiveBasis
plt.Subplot(3, 1, 2)
s.PlotBasis("", npts, 0) // 0 => CalcBasis
s.PlotBasis(str2, npts, 1) // 1 => CalcBasisAndDerivs
s.PlotBasis(str3, npts, 2) // 2 => RecursiveBasis
plt.Subplot(3, 1, 3)
s.PlotDerivs("", npts, 0) // 0 => CalcBasisAndDerivs
s.PlotDerivs(str4, npts, 1) // 1 => NumericalDeriv
plt.SaveD("/tmp/gosl/gm", "bspline03.png")
}
}
开发者ID:PaddySchmidt,项目名称:gosl,代码行数:78,代码来源:t_bspline_test.go
注:本文中的github.com/cpmech/gosl/plt.Subplot函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论