• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Golang nl.NetlinkRequest类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Golang中github.com/coreos/rkt/Godeps/_workspace/src/github.com/vishvananda/netlink/nl.NetlinkRequest的典型用法代码示例。如果您正苦于以下问题:Golang NetlinkRequest类的具体用法?Golang NetlinkRequest怎么用?Golang NetlinkRequest使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了NetlinkRequest类的4个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: neighHandle

func neighHandle(neigh *Neigh, req *nl.NetlinkRequest) error {
	var family int
	if neigh.Family > 0 {
		family = neigh.Family
	} else {
		family = nl.GetIPFamily(neigh.IP)
	}

	msg := Ndmsg{
		Family: uint8(family),
		Index:  uint32(neigh.LinkIndex),
		State:  uint16(neigh.State),
		Type:   uint8(neigh.Type),
		Flags:  uint8(neigh.Flags),
	}
	req.AddData(&msg)

	ipData := neigh.IP.To4()
	if ipData == nil {
		ipData = neigh.IP.To16()
	}

	dstData := nl.NewRtAttr(NDA_DST, ipData)
	req.AddData(dstData)

	hwData := nl.NewRtAttr(NDA_LLADDR, []byte(neigh.HardwareAddr))
	req.AddData(hwData)

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:matomesc,项目名称:rkt,代码行数:31,代码来源:neigh_linux.go


示例2: execGetLink

func execGetLink(req *nl.NetlinkRequest) (Link, error) {
	msgs, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	if err != nil {
		if errno, ok := err.(syscall.Errno); ok {
			if errno == syscall.ENODEV {
				return nil, fmt.Errorf("Link not found")
			}
		}
		return nil, err
	}

	switch {
	case len(msgs) == 0:
		return nil, fmt.Errorf("Link not found")

	case len(msgs) == 1:
		return linkDeserialize(msgs[0])

	default:
		return nil, fmt.Errorf("More than one link found")
	}
}
开发者ID:matomesc,项目名称:rkt,代码行数:22,代码来源:link_linux.go


示例3: addrHandle

func addrHandle(link Link, addr *Addr, req *nl.NetlinkRequest) error {
	base := link.Attrs()
	if addr.Label != "" && !strings.HasPrefix(addr.Label, base.Name) {
		return fmt.Errorf("label must begin with interface name")
	}
	ensureIndex(base)

	family := nl.GetIPFamily(addr.IP)

	msg := nl.NewIfAddrmsg(family)
	msg.Index = uint32(base.Index)
	prefixlen, _ := addr.Mask.Size()
	msg.Prefixlen = uint8(prefixlen)
	req.AddData(msg)

	var addrData []byte
	if family == FAMILY_V4 {
		addrData = addr.IP.To4()
	} else {
		addrData = addr.IP.To16()
	}

	localData := nl.NewRtAttr(syscall.IFA_LOCAL, addrData)
	req.AddData(localData)

	addressData := nl.NewRtAttr(syscall.IFA_ADDRESS, addrData)
	req.AddData(addressData)

	if addr.Label != "" {
		labelData := nl.NewRtAttr(syscall.IFA_LABEL, nl.ZeroTerminated(addr.Label))
		req.AddData(labelData)
	}

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:balagopalraj,项目名称:clearlinux,代码行数:36,代码来源:addr_linux.go


示例4: routeHandle

func routeHandle(route *Route, req *nl.NetlinkRequest) error {
	if (route.Dst == nil || route.Dst.IP == nil) && route.Src == nil && route.Gw == nil {
		return fmt.Errorf("one of Dst.IP, Src, or Gw must not be nil")
	}

	msg := nl.NewRtMsg()
	msg.Scope = uint8(route.Scope)
	family := -1
	var rtAttrs []*nl.RtAttr

	if route.Dst != nil && route.Dst.IP != nil {
		dstLen, _ := route.Dst.Mask.Size()
		msg.Dst_len = uint8(dstLen)
		dstFamily := nl.GetIPFamily(route.Dst.IP)
		family = dstFamily
		var dstData []byte
		if dstFamily == FAMILY_V4 {
			dstData = route.Dst.IP.To4()
		} else {
			dstData = route.Dst.IP.To16()
		}
		rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_DST, dstData))
	}

	if route.Src != nil {
		srcFamily := nl.GetIPFamily(route.Src)
		if family != -1 && family != srcFamily {
			return fmt.Errorf("source and destination ip are not the same IP family")
		}
		family = srcFamily
		var srcData []byte
		if srcFamily == FAMILY_V4 {
			srcData = route.Src.To4()
		} else {
			srcData = route.Src.To16()
		}
		// The commonly used src ip for routes is actually PREFSRC
		rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_PREFSRC, srcData))
	}

	if route.Gw != nil {
		gwFamily := nl.GetIPFamily(route.Gw)
		if family != -1 && family != gwFamily {
			return fmt.Errorf("gateway, source, and destination ip are not the same IP family")
		}
		family = gwFamily
		var gwData []byte
		if gwFamily == FAMILY_V4 {
			gwData = route.Gw.To4()
		} else {
			gwData = route.Gw.To16()
		}
		rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_GATEWAY, gwData))
	}

	msg.Family = uint8(family)

	req.AddData(msg)
	for _, attr := range rtAttrs {
		req.AddData(attr)
	}

	var (
		b      = make([]byte, 4)
		native = nl.NativeEndian()
	)
	native.PutUint32(b, uint32(route.LinkIndex))

	req.AddData(nl.NewRtAttr(syscall.RTA_OIF, b))

	_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
	return err
}
开发者ID:balagopalraj,项目名称:clearlinux,代码行数:73,代码来源:route_linux.go



注:本文中的github.com/coreos/rkt/Godeps/_workspace/src/github.com/vishvananda/netlink/nl.NetlinkRequest类示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Golang openpgp.ReadArmoredKeyRing函数代码示例发布时间:2022-05-23
下一篇:
Golang nl.NewRtAttr函数代码示例发布时间:2022-05-23
热门推荐
热门话题
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap