本文整理汇总了Golang中github.com/coreos/mantle/Godeps/_workspace/src/github.com/vishvananda/netlink/nl.NewNetlinkRequest函数的典型用法代码示例。如果您正苦于以下问题:Golang NewNetlinkRequest函数的具体用法?Golang NewNetlinkRequest怎么用?Golang NewNetlinkRequest使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了NewNetlinkRequest函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。
示例1: NeighList
// NeighList gets a list of IP-MAC mappings in the system (ARP table).
// Equivalent to: `ip neighbor show`.
// The list can be filtered by link and ip family.
func NeighList(linkIndex, family int) ([]Neigh, error) {
req := nl.NewNetlinkRequest(syscall.RTM_GETNEIGH, syscall.NLM_F_DUMP)
msg := Ndmsg{
Family: uint8(family),
}
req.AddData(&msg)
msgs, err := req.Execute(syscall.NETLINK_ROUTE, syscall.RTM_NEWNEIGH)
if err != nil {
return nil, err
}
res := make([]Neigh, 0)
for _, m := range msgs {
ndm := deserializeNdmsg(m)
if linkIndex != 0 && int(ndm.Index) != linkIndex {
// Ignore messages from other interfaces
continue
}
neigh, err := NeighDeserialize(m)
if err != nil {
continue
}
res = append(res, *neigh)
}
return res, nil
}
开发者ID:hanscj1,项目名称:mantle,代码行数:33,代码来源:neigh_linux.go
示例2: XfrmPolicyAdd
// XfrmPolicyAdd will add an xfrm policy to the system.
// Equivalent to: `ip xfrm policy add $policy`
func XfrmPolicyAdd(policy *XfrmPolicy) error {
req := nl.NewNetlinkRequest(nl.XFRM_MSG_NEWPOLICY, syscall.NLM_F_CREATE|syscall.NLM_F_EXCL|syscall.NLM_F_ACK)
msg := &nl.XfrmUserpolicyInfo{}
selFromPolicy(&msg.Sel, policy)
msg.Priority = uint32(policy.Priority)
msg.Index = uint32(policy.Index)
msg.Dir = uint8(policy.Dir)
msg.Lft.SoftByteLimit = nl.XFRM_INF
msg.Lft.HardByteLimit = nl.XFRM_INF
msg.Lft.SoftPacketLimit = nl.XFRM_INF
msg.Lft.HardPacketLimit = nl.XFRM_INF
req.AddData(msg)
tmplData := make([]byte, nl.SizeofXfrmUserTmpl*len(policy.Tmpls))
for i, tmpl := range policy.Tmpls {
start := i * nl.SizeofXfrmUserTmpl
userTmpl := nl.DeserializeXfrmUserTmpl(tmplData[start : start+nl.SizeofXfrmUserTmpl])
userTmpl.XfrmId.Daddr.FromIP(tmpl.Dst)
userTmpl.Saddr.FromIP(tmpl.Src)
userTmpl.XfrmId.Proto = uint8(tmpl.Proto)
userTmpl.Mode = uint8(tmpl.Mode)
userTmpl.Reqid = uint32(tmpl.Reqid)
userTmpl.Aalgos = ^uint32(0)
userTmpl.Ealgos = ^uint32(0)
userTmpl.Calgos = ^uint32(0)
}
if len(tmplData) > 0 {
tmpls := nl.NewRtAttr(nl.XFRMA_TMPL, tmplData)
req.AddData(tmpls)
}
_, err := req.Execute(syscall.NETLINK_XFRM, 0)
return err
}
开发者ID:hanscj1,项目名称:mantle,代码行数:37,代码来源:xfrm_policy_linux.go
示例3: LinkList
// LinkList gets a list of link devices.
// Equivalent to: `ip link show`
func LinkList() ([]Link, error) {
// NOTE(vish): This duplicates functionality in net/iface_linux.go, but we need
// to get the message ourselves to parse link type.
req := nl.NewNetlinkRequest(syscall.RTM_GETLINK, syscall.NLM_F_DUMP)
msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
req.AddData(msg)
msgs, err := req.Execute(syscall.NETLINK_ROUTE, syscall.RTM_NEWLINK)
if err != nil {
return nil, err
}
res := make([]Link, 0)
for _, m := range msgs {
link, err := linkDeserialize(m)
if err != nil {
return nil, err
}
res = append(res, link)
}
return res, nil
}
开发者ID:hanscj1,项目名称:mantle,代码行数:27,代码来源:link_linux.go
示例4: LinkByIndex
// LinkByIndex finds a link by index and returns a pointer to the object.
func LinkByIndex(index int) (Link, error) {
req := nl.NewNetlinkRequest(syscall.RTM_GETLINK, syscall.NLM_F_ACK)
msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
msg.Index = int32(index)
req.AddData(msg)
return execGetLink(req)
}
开发者ID:hanscj1,项目名称:mantle,代码行数:10,代码来源:link_linux.go
示例5: RouteGet
// RouteGet gets a route to a specific destination from the host system.
// Equivalent to: 'ip route get'.
func RouteGet(destination net.IP) ([]Route, error) {
req := nl.NewNetlinkRequest(syscall.RTM_GETROUTE, syscall.NLM_F_REQUEST)
family := nl.GetIPFamily(destination)
var destinationData []byte
var bitlen uint8
if family == FAMILY_V4 {
destinationData = destination.To4()
bitlen = 32
} else {
destinationData = destination.To16()
bitlen = 128
}
msg := &nl.RtMsg{}
msg.Family = uint8(family)
msg.Dst_len = bitlen
req.AddData(msg)
rtaDst := nl.NewRtAttr(syscall.RTA_DST, destinationData)
req.AddData(rtaDst)
msgs, err := req.Execute(syscall.NETLINK_ROUTE, syscall.RTM_NEWROUTE)
if err != nil {
return nil, err
}
native := nl.NativeEndian()
res := make([]Route, 0)
for _, m := range msgs {
msg := nl.DeserializeRtMsg(m)
attrs, err := nl.ParseRouteAttr(m[msg.Len():])
if err != nil {
return nil, err
}
route := Route{}
for _, attr := range attrs {
switch attr.Attr.Type {
case syscall.RTA_GATEWAY:
route.Gw = net.IP(attr.Value)
case syscall.RTA_PREFSRC:
route.Src = net.IP(attr.Value)
case syscall.RTA_DST:
route.Dst = &net.IPNet{
IP: attr.Value,
Mask: net.CIDRMask(int(msg.Dst_len), 8*len(attr.Value)),
}
case syscall.RTA_OIF:
routeIndex := int(native.Uint32(attr.Value[0:4]))
route.LinkIndex = routeIndex
}
}
res = append(res, route)
}
return res, nil
}
开发者ID:hanscj1,项目名称:mantle,代码行数:58,代码来源:route_linux.go
示例6: XfrmPolicyDel
// XfrmPolicyDel will delete an xfrm policy from the system. Note that
// the Tmpls are ignored when matching the policy to delete.
// Equivalent to: `ip xfrm policy del $policy`
func XfrmPolicyDel(policy *XfrmPolicy) error {
req := nl.NewNetlinkRequest(nl.XFRM_MSG_DELPOLICY, syscall.NLM_F_ACK)
msg := &nl.XfrmUserpolicyId{}
selFromPolicy(&msg.Sel, policy)
msg.Index = uint32(policy.Index)
msg.Dir = uint8(policy.Dir)
req.AddData(msg)
_, err := req.Execute(syscall.NETLINK_XFRM, 0)
return err
}
开发者ID:hanscj1,项目名称:mantle,代码行数:15,代码来源:xfrm_policy_linux.go
示例7: XfrmPolicyList
// XfrmPolicyList gets a list of xfrm policies in the system.
// Equivalent to: `ip xfrm policy show`.
// The list can be filtered by ip family.
func XfrmPolicyList(family int) ([]XfrmPolicy, error) {
req := nl.NewNetlinkRequest(nl.XFRM_MSG_GETPOLICY, syscall.NLM_F_DUMP)
msg := nl.NewIfInfomsg(family)
req.AddData(msg)
msgs, err := req.Execute(syscall.NETLINK_XFRM, nl.XFRM_MSG_NEWPOLICY)
if err != nil {
return nil, err
}
res := make([]XfrmPolicy, 0)
for _, m := range msgs {
msg := nl.DeserializeXfrmUserpolicyInfo(m)
if family != FAMILY_ALL && family != int(msg.Sel.Family) {
continue
}
var policy XfrmPolicy
policy.Dst = msg.Sel.Daddr.ToIPNet(msg.Sel.PrefixlenD)
policy.Src = msg.Sel.Saddr.ToIPNet(msg.Sel.PrefixlenS)
policy.Priority = int(msg.Priority)
policy.Index = int(msg.Index)
policy.Dir = Dir(msg.Dir)
attrs, err := nl.ParseRouteAttr(m[msg.Len():])
if err != nil {
return nil, err
}
for _, attr := range attrs {
switch attr.Attr.Type {
case nl.XFRMA_TMPL:
max := len(attr.Value)
for i := 0; i < max; i += nl.SizeofXfrmUserTmpl {
var resTmpl XfrmPolicyTmpl
tmpl := nl.DeserializeXfrmUserTmpl(attr.Value[i : i+nl.SizeofXfrmUserTmpl])
resTmpl.Dst = tmpl.XfrmId.Daddr.ToIP()
resTmpl.Src = tmpl.Saddr.ToIP()
resTmpl.Proto = Proto(tmpl.XfrmId.Proto)
resTmpl.Mode = Mode(tmpl.Mode)
resTmpl.Reqid = int(tmpl.Reqid)
policy.Tmpls = append(policy.Tmpls, resTmpl)
}
}
}
res = append(res, policy)
}
return res, nil
}
开发者ID:hanscj1,项目名称:mantle,代码行数:55,代码来源:xfrm_policy_linux.go
示例8: LinkGetProtinfo
func LinkGetProtinfo(link Link) (Protinfo, error) {
base := link.Attrs()
ensureIndex(base)
var pi Protinfo
req := nl.NewNetlinkRequest(syscall.RTM_GETLINK, syscall.NLM_F_DUMP)
msg := nl.NewIfInfomsg(syscall.AF_BRIDGE)
req.AddData(msg)
msgs, err := req.Execute(syscall.NETLINK_ROUTE, 0)
if err != nil {
return pi, err
}
for _, m := range msgs {
ans := nl.DeserializeIfInfomsg(m)
if int(ans.Index) != base.Index {
continue
}
attrs, err := nl.ParseRouteAttr(m[ans.Len():])
if err != nil {
return pi, err
}
for _, attr := range attrs {
if attr.Attr.Type != syscall.IFLA_PROTINFO|syscall.NLA_F_NESTED {
continue
}
infos, err := nl.ParseRouteAttr(attr.Value)
if err != nil {
return pi, err
}
var pi Protinfo
for _, info := range infos {
switch info.Attr.Type {
case nl.IFLA_BRPORT_MODE:
pi.Hairpin = byteToBool(info.Value[0])
case nl.IFLA_BRPORT_GUARD:
pi.Guard = byteToBool(info.Value[0])
case nl.IFLA_BRPORT_FAST_LEAVE:
pi.FastLeave = byteToBool(info.Value[0])
case nl.IFLA_BRPORT_PROTECT:
pi.RootBlock = byteToBool(info.Value[0])
case nl.IFLA_BRPORT_LEARNING:
pi.Learning = byteToBool(info.Value[0])
case nl.IFLA_BRPORT_UNICAST_FLOOD:
pi.Flood = byteToBool(info.Value[0])
}
}
return pi, nil
}
}
return pi, fmt.Errorf("Device with index %d not found", base.Index)
}
开发者ID:hanscj1,项目名称:mantle,代码行数:51,代码来源:protinfo.go
示例9: LinkDel
// LinkDel deletes link device. Either Index or Name must be set in
// the link object for it to be deleted. The other values are ignored.
// Equivalent to: `ip link del $link`
func LinkDel(link Link) error {
base := link.Attrs()
ensureIndex(base)
req := nl.NewNetlinkRequest(syscall.RTM_DELLINK, syscall.NLM_F_ACK)
msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
msg.Index = int32(base.Index)
req.AddData(msg)
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
return err
}
开发者ID:hanscj1,项目名称:mantle,代码行数:17,代码来源:link_linux.go
示例10: LinkSetDown
// LinkSetUp disables link device.
// Equivalent to: `ip link set $link down`
func LinkSetDown(link Link) error {
base := link.Attrs()
ensureIndex(base)
req := nl.NewNetlinkRequest(syscall.RTM_NEWLINK, syscall.NLM_F_ACK)
msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
msg.Change = syscall.IFF_UP
msg.Flags = 0 & ^syscall.IFF_UP
msg.Index = int32(base.Index)
req.AddData(msg)
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
return err
}
开发者ID:hanscj1,项目名称:mantle,代码行数:16,代码来源:link_linux.go
示例11: AddrList
// AddrList gets a list of IP addresses in the system.
// Equivalent to: `ip addr show`.
// The list can be filtered by link and ip family.
func AddrList(link Link, family int) ([]Addr, error) {
req := nl.NewNetlinkRequest(syscall.RTM_GETADDR, syscall.NLM_F_DUMP)
msg := nl.NewIfInfomsg(family)
req.AddData(msg)
msgs, err := req.Execute(syscall.NETLINK_ROUTE, syscall.RTM_NEWADDR)
if err != nil {
return nil, err
}
index := 0
if link != nil {
base := link.Attrs()
ensureIndex(base)
index = base.Index
}
res := make([]Addr, 0)
for _, m := range msgs {
msg := nl.DeserializeIfAddrmsg(m)
if link != nil && msg.Index != uint32(index) {
// Ignore messages from other interfaces
continue
}
attrs, err := nl.ParseRouteAttr(m[msg.Len():])
if err != nil {
return nil, err
}
var addr Addr
for _, attr := range attrs {
switch attr.Attr.Type {
case syscall.IFA_ADDRESS:
addr.IPNet = &net.IPNet{
IP: attr.Value,
Mask: net.CIDRMask(int(msg.Prefixlen), 8*len(attr.Value)),
}
case syscall.IFA_LABEL:
addr.Label = string(attr.Value[:len(attr.Value)-1])
}
}
res = append(res, addr)
}
return res, nil
}
开发者ID:hanscj1,项目名称:mantle,代码行数:51,代码来源:addr_linux.go
示例12: LinkSetName
// LinkSetName sets the name of the link device.
// Equivalent to: `ip link set $link name $name`
func LinkSetName(link Link, name string) error {
base := link.Attrs()
ensureIndex(base)
req := nl.NewNetlinkRequest(syscall.RTM_SETLINK, syscall.NLM_F_ACK)
msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
msg.Type = syscall.RTM_SETLINK
msg.Flags = syscall.NLM_F_REQUEST
msg.Index = int32(base.Index)
msg.Change = nl.DEFAULT_CHANGE
req.AddData(msg)
data := nl.NewRtAttr(syscall.IFLA_IFNAME, []byte(name))
req.AddData(data)
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
return err
}
开发者ID:hanscj1,项目名称:mantle,代码行数:20,代码来源:link_linux.go
示例13: XfrmStateAdd
// XfrmStateAdd will add an xfrm state to the system.
// Equivalent to: `ip xfrm state add $state`
func XfrmStateAdd(state *XfrmState) error {
// A state with spi 0 can't be deleted so don't allow it to be set
if state.Spi == 0 {
return fmt.Errorf("Spi must be set when adding xfrm state.")
}
req := nl.NewNetlinkRequest(nl.XFRM_MSG_NEWSA, syscall.NLM_F_CREATE|syscall.NLM_F_EXCL|syscall.NLM_F_ACK)
msg := &nl.XfrmUsersaInfo{}
msg.Family = uint16(nl.GetIPFamily(state.Dst))
msg.Id.Daddr.FromIP(state.Dst)
msg.Saddr.FromIP(state.Src)
msg.Id.Proto = uint8(state.Proto)
msg.Mode = uint8(state.Mode)
msg.Id.Spi = nl.Swap32(uint32(state.Spi))
msg.Reqid = uint32(state.Reqid)
msg.ReplayWindow = uint8(state.ReplayWindow)
msg.Lft.SoftByteLimit = nl.XFRM_INF
msg.Lft.HardByteLimit = nl.XFRM_INF
msg.Lft.SoftPacketLimit = nl.XFRM_INF
msg.Lft.HardPacketLimit = nl.XFRM_INF
req.AddData(msg)
if state.Auth != nil {
out := nl.NewRtAttr(nl.XFRMA_ALG_AUTH_TRUNC, writeStateAlgoAuth(state.Auth))
req.AddData(out)
}
if state.Crypt != nil {
out := nl.NewRtAttr(nl.XFRMA_ALG_CRYPT, writeStateAlgo(state.Crypt))
req.AddData(out)
}
if state.Encap != nil {
encapData := make([]byte, nl.SizeofXfrmEncapTmpl)
encap := nl.DeserializeXfrmEncapTmpl(encapData)
encap.EncapType = uint16(state.Encap.Type)
encap.EncapSport = nl.Swap16(uint16(state.Encap.SrcPort))
encap.EncapDport = nl.Swap16(uint16(state.Encap.DstPort))
encap.EncapOa.FromIP(state.Encap.OriginalAddress)
out := nl.NewRtAttr(nl.XFRMA_ENCAP, encapData)
req.AddData(out)
}
_, err := req.Execute(syscall.NETLINK_XFRM, 0)
return err
}
开发者ID:hanscj1,项目名称:mantle,代码行数:46,代码来源:xfrm_state_linux.go
示例14: XfrmStateDel
// XfrmStateDel will delete an xfrm state from the system. Note that
// the Algos are ignored when matching the state to delete.
// Equivalent to: `ip xfrm state del $state`
func XfrmStateDel(state *XfrmState) error {
req := nl.NewNetlinkRequest(nl.XFRM_MSG_DELSA, syscall.NLM_F_ACK)
msg := &nl.XfrmUsersaId{}
msg.Daddr.FromIP(state.Dst)
msg.Family = uint16(nl.GetIPFamily(state.Dst))
msg.Proto = uint8(state.Proto)
msg.Spi = nl.Swap32(uint32(state.Spi))
req.AddData(msg)
saddr := nl.XfrmAddress{}
saddr.FromIP(state.Src)
srcdata := nl.NewRtAttr(nl.XFRMA_SRCADDR, saddr.Serialize())
req.AddData(srcdata)
_, err := req.Execute(syscall.NETLINK_XFRM, 0)
return err
}
开发者ID:hanscj1,项目名称:mantle,代码行数:22,代码来源:xfrm_state_linux.go
示例15: LinkSetMTU
// LinkSetMTU sets the mtu of the link device.
// Equivalent to: `ip link set $link mtu $mtu`
func LinkSetMTU(link Link, mtu int) error {
base := link.Attrs()
ensureIndex(base)
req := nl.NewNetlinkRequest(syscall.RTM_SETLINK, syscall.NLM_F_ACK)
msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
msg.Type = syscall.RTM_SETLINK
msg.Flags = syscall.NLM_F_REQUEST
msg.Index = int32(base.Index)
msg.Change = nl.DEFAULT_CHANGE
req.AddData(msg)
b := make([]byte, 4)
native.PutUint32(b, uint32(mtu))
data := nl.NewRtAttr(syscall.IFLA_MTU, b)
req.AddData(data)
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
return err
}
开发者ID:hanscj1,项目名称:mantle,代码行数:23,代码来源:link_linux.go
示例16: setProtinfoAttr
func setProtinfoAttr(link Link, mode bool, attr int) error {
base := link.Attrs()
ensureIndex(base)
req := nl.NewNetlinkRequest(syscall.RTM_SETLINK, syscall.NLM_F_ACK)
msg := nl.NewIfInfomsg(syscall.AF_BRIDGE)
msg.Type = syscall.RTM_SETLINK
msg.Flags = syscall.NLM_F_REQUEST
msg.Index = int32(base.Index)
msg.Change = nl.DEFAULT_CHANGE
req.AddData(msg)
br := nl.NewRtAttr(syscall.IFLA_PROTINFO|syscall.NLA_F_NESTED, nil)
nl.NewRtAttrChild(br, attr, boolToByte(mode))
req.AddData(br)
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
if err != nil {
return err
}
return nil
}
开发者ID:hanscj1,项目名称:mantle,代码行数:21,代码来源:link_linux.go
示例17: LinkByName
// LinkByName finds a link by name and returns a pointer to the object.
func LinkByName(name string) (Link, error) {
if lookupByDump {
return linkByNameDump(name)
}
req := nl.NewNetlinkRequest(syscall.RTM_GETLINK, syscall.NLM_F_ACK)
msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
req.AddData(msg)
nameData := nl.NewRtAttr(syscall.IFLA_IFNAME, nl.ZeroTerminated(name))
req.AddData(nameData)
link, err := execGetLink(req)
if err == syscall.EINVAL {
// older kernels don't support looking up via IFLA_IFNAME
// so fall back to dumping all links
lookupByDump = true
return linkByNameDump(name)
}
return link, err
}
开发者ID:hanscj1,项目名称:mantle,代码行数:24,代码来源:link_linux.go
示例18: RouteDel
// RouteAdd will delete a route from the system.
// Equivalent to: `ip route del $route`
func RouteDel(route *Route) error {
req := nl.NewNetlinkRequest(syscall.RTM_DELROUTE, syscall.NLM_F_ACK)
return routeHandle(route, req)
}
开发者ID:hanscj1,项目名称:mantle,代码行数:6,代码来源:route_linux.go
示例19: neighAdd
func neighAdd(neigh *Neigh, mode int) error {
req := nl.NewNetlinkRequest(syscall.RTM_NEWNEIGH, mode|syscall.NLM_F_ACK)
return neighHandle(neigh, req)
}
开发者ID:hanscj1,项目名称:mantle,代码行数:4,代码来源:neigh_linux.go
示例20: LinkAdd
// LinkAdd adds a new link device. The type and features of the device
// are taken fromt the parameters in the link object.
// Equivalent to: `ip link add $link`
func LinkAdd(link Link) error {
// TODO: set mtu and hardware address
// TODO: support extra data for macvlan
base := link.Attrs()
if base.Name == "" {
return fmt.Errorf("LinkAttrs.Name cannot be empty!")
}
req := nl.NewNetlinkRequest(syscall.RTM_NEWLINK, syscall.NLM_F_CREATE|syscall.NLM_F_EXCL|syscall.NLM_F_ACK)
msg := nl.NewIfInfomsg(syscall.AF_UNSPEC)
req.AddData(msg)
if base.ParentIndex != 0 {
b := make([]byte, 4)
native.PutUint32(b, uint32(base.ParentIndex))
data := nl.NewRtAttr(syscall.IFLA_LINK, b)
req.AddData(data)
} else if link.Type() == "ipvlan" {
return fmt.Errorf("Can't create ipvlan link without ParentIndex")
}
nameData := nl.NewRtAttr(syscall.IFLA_IFNAME, nl.ZeroTerminated(base.Name))
req.AddData(nameData)
if base.MTU > 0 {
mtu := nl.NewRtAttr(syscall.IFLA_MTU, nl.Uint32Attr(uint32(base.MTU)))
req.AddData(mtu)
}
linkInfo := nl.NewRtAttr(syscall.IFLA_LINKINFO, nil)
nl.NewRtAttrChild(linkInfo, nl.IFLA_INFO_KIND, nl.NonZeroTerminated(link.Type()))
nl.NewRtAttrChild(linkInfo, syscall.IFLA_TXQLEN, nl.Uint32Attr(base.TxQLen))
if vlan, ok := link.(*Vlan); ok {
b := make([]byte, 2)
native.PutUint16(b, uint16(vlan.VlanId))
data := nl.NewRtAttrChild(linkInfo, nl.IFLA_INFO_DATA, nil)
nl.NewRtAttrChild(data, nl.IFLA_VLAN_ID, b)
} else if veth, ok := link.(*Veth); ok {
data := nl.NewRtAttrChild(linkInfo, nl.IFLA_INFO_DATA, nil)
peer := nl.NewRtAttrChild(data, nl.VETH_INFO_PEER, nil)
nl.NewIfInfomsgChild(peer, syscall.AF_UNSPEC)
nl.NewRtAttrChild(peer, syscall.IFLA_IFNAME, nl.ZeroTerminated(veth.PeerName))
nl.NewRtAttrChild(peer, syscall.IFLA_TXQLEN, nl.Uint32Attr(base.TxQLen))
if base.MTU > 0 {
nl.NewRtAttrChild(peer, syscall.IFLA_MTU, nl.Uint32Attr(uint32(base.MTU)))
}
} else if vxlan, ok := link.(*Vxlan); ok {
addVxlanAttrs(vxlan, linkInfo)
} else if ipv, ok := link.(*IPVlan); ok {
data := nl.NewRtAttrChild(linkInfo, nl.IFLA_INFO_DATA, nil)
nl.NewRtAttrChild(data, nl.IFLA_IPVLAN_MODE, nl.Uint16Attr(uint16(ipv.Mode)))
}
req.AddData(linkInfo)
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
if err != nil {
return err
}
ensureIndex(base)
// can't set master during create, so set it afterwards
if base.MasterIndex != 0 {
// TODO: verify MasterIndex is actually a bridge?
return LinkSetMasterByIndex(link, base.MasterIndex)
}
return nil
}
开发者ID:hanscj1,项目名称:mantle,代码行数:76,代码来源:link_linux.go
注:本文中的github.com/coreos/mantle/Godeps/_workspace/src/github.com/vishvananda/netlink/nl.NewNetlinkRequest函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论