Golang sqs.New函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/convox/rack/Godeps/_workspace/src/github.com/aws/aws-sdk-go/service/sqs.New函数的典型用法代码示例。如果您正苦于以下问题：Golang New函数的具体用法？Golang New怎么用？Golang New使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了New函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: ExampleSQS_ChangeMessageVisibilityBatch

func ExampleSQS_ChangeMessageVisibilityBatch() {
	svc := sqs.New(session.New())

	params := &sqs.ChangeMessageVisibilityBatchInput{
		Entries: []*sqs.ChangeMessageVisibilityBatchRequestEntry{ // Required
			{ // Required
				Id:                aws.String("String"), // Required
				ReceiptHandle:     aws.String("String"), // Required
				VisibilityTimeout: aws.Int64(1),
			},
			// More values...
		},
		QueueUrl: aws.String("String"), // Required
	}
	resp, err := svc.ChangeMessageVisibilityBatch(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:26，代码来源:examples_test.go

示例2: ExampleSQS_ReceiveMessage

func ExampleSQS_ReceiveMessage() {
	svc := sqs.New(session.New())

	params := &sqs.ReceiveMessageInput{
		QueueUrl: aws.String("String"), // Required
		AttributeNames: []*string{
			aws.String("QueueAttributeName"), // Required
			// More values...
		},
		MaxNumberOfMessages: aws.Int64(1),
		MessageAttributeNames: []*string{
			aws.String("MessageAttributeName"), // Required
			// More values...
		},
		VisibilityTimeout: aws.Int64(1),
		WaitTimeSeconds:   aws.Int64(1),
	}
	resp, err := svc.ReceiveMessage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:29，代码来源:examples_test.go

示例3: ExampleSQS_AddPermission

func ExampleSQS_AddPermission() {
	svc := sqs.New(session.New())

	params := &sqs.AddPermissionInput{
		AWSAccountIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		Actions: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		Label:    aws.String("String"), // Required
		QueueUrl: aws.String("String"), // Required
	}
	resp, err := svc.AddPermission(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:27，代码来源:examples_test.go

示例4: TestFlattenedTraits

func TestFlattenedTraits(t *testing.T) {
	s := sqs.New(session.New())
	_, err := s.DeleteMessageBatch(&sqs.DeleteMessageBatchInput{
		QueueURL: aws.String("QUEUE"),
		Entries: []*sqs.DeleteMessageBatchRequestEntry{
			{
				ID:            aws.String("TEST"),
				ReceiptHandle: aws.String("RECEIPT"),
			},
		},
	})

	assert.Error(t, err)
	assert.Equal(t, "InvalidAddress", err.Code())
	assert.Equal(t, "The address QUEUE is not valid for this endpoint.", err.Message())
}

开发者ID:kuenzaa，项目名称:rack，代码行数:16，代码来源:api_test.go

示例5: ExampleSQS_PurgeQueue

func ExampleSQS_PurgeQueue() {
	svc := sqs.New(session.New())

	params := &sqs.PurgeQueueInput{
		QueueUrl: aws.String("String"), // Required
	}
	resp, err := svc.PurgeQueue(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:18，代码来源:examples_test.go

示例6: ExampleSQS_ListQueues

func ExampleSQS_ListQueues() {
	svc := sqs.New(session.New())

	params := &sqs.ListQueuesInput{
		QueueNamePrefix: aws.String("String"),
	}
	resp, err := svc.ListQueues(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:18，代码来源:examples_test.go

示例7: ExampleSQS_GetQueueUrl

func ExampleSQS_GetQueueUrl() {
	svc := sqs.New(session.New())

	params := &sqs.GetQueueUrlInput{
		QueueName:              aws.String("String"), // Required
		QueueOwnerAWSAccountId: aws.String("String"),
	}
	resp, err := svc.GetQueueUrl(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:19，代码来源:examples_test.go

示例8: ExampleSQS_SendMessageBatch

func ExampleSQS_SendMessageBatch() {
	svc := sqs.New(session.New())

	params := &sqs.SendMessageBatchInput{
		Entries: []*sqs.SendMessageBatchRequestEntry{ // Required
			{ // Required
				Id:           aws.String("String"), // Required
				MessageBody:  aws.String("String"), // Required
				DelaySeconds: aws.Int64(1),
				MessageAttributes: map[string]*sqs.MessageAttributeValue{
					"Key": { // Required
						DataType: aws.String("String"), // Required
						BinaryListValues: [][]byte{
							[]byte("PAYLOAD"), // Required
							// More values...
						},
						BinaryValue: []byte("PAYLOAD"),
						StringListValues: []*string{
							aws.String("String"), // Required
							// More values...
						},
						StringValue: aws.String("String"),
					},
					// More values...
				},
			},
			// More values...
		},
		QueueUrl: aws.String("String"), // Required
	}
	resp, err := svc.SendMessageBatch(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:42，代码来源:examples_test.go

示例9: TestSendMessageChecksumInvalidNoValidation

func TestSendMessageChecksumInvalidNoValidation(t *testing.T) {
	s := sqs.New(unit.Session, &aws.Config{
		DisableParamValidation:  aws.Bool(true),
		DisableComputeChecksums: aws.Bool(true),
	})
	s.Handlers.Send.Clear()

	req, _ := s.SendMessageRequest(&sqs.SendMessageInput{
		MessageBody: aws.String("test"),
	})
	req.Handlers.Send.PushBack(func(r *request.Request) {
		body := ioutil.NopCloser(bytes.NewReader([]byte("")))
		r.HTTPResponse = &http.Response{StatusCode: 200, Body: body}
		r.Data = &sqs.SendMessageOutput{
			MD5OfMessageBody: aws.String("000"),
			MessageId:        aws.String("12345"),
		}
	})
	err := req.Send()
	assert.NoError(t, err)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:21，代码来源:checksums_test.go

示例10: ExampleSQS_CreateQueue

func ExampleSQS_CreateQueue() {
	svc := sqs.New(session.New())

	params := &sqs.CreateQueueInput{
		QueueName: aws.String("String"), // Required
		Attributes: map[string]*string{
			"Key": aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.CreateQueue(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:22，代码来源:examples_test.go

示例11: ExampleSQS_GetQueueAttributes

func ExampleSQS_GetQueueAttributes() {
	svc := sqs.New(session.New())

	params := &sqs.GetQueueAttributesInput{
		QueueUrl: aws.String("String"), // Required
		AttributeNames: []*string{
			aws.String("QueueAttributeName"), // Required
			// More values...
		},
	}
	resp, err := svc.GetQueueAttributes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:kuenzaa，项目名称:rack，代码行数:22，代码来源:examples_test.go

示例12: SQS

func SQS() *sqs.SQS {
	return sqs.New(awsConfig())
}

开发者ID:gisnalbert，项目名称:rack，代码行数:3，代码来源:models.go

示例13: SQS

func SQS() *sqs.SQS {
	return sqs.New(session.New(), awsConfig())
}

开发者ID:soulware，项目名称:rack，代码行数:3，代码来源:models.go

示例14: SQS

func SQS() *sqs.SQS {
	return sqs.New(session.New(), &aws.Config{
		Credentials: Credentials(nil),
		Region:      Region(nil),
	})
}

开发者ID:kuenzaa，项目名称:rack，代码行数:6，代码来源:aws.go

示例15: TestSendMessageChecksum

	"io/ioutil"
	"net/http"
	"testing"

	"github.com/convox/rack/Godeps/_workspace/src/github.com/stretchr/testify/assert"

	"github.com/aws/aws-sdk-go/awstesting/unit"
	"github.com/convox/rack/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws"
	"github.com/convox/rack/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/convox/rack/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws/request"
	"github.com/convox/rack/Godeps/_workspace/src/github.com/aws/aws-sdk-go/service/sqs"
)

var svc = func() *sqs.SQS {
	s := sqs.New(unit.Session, &aws.Config{
		DisableParamValidation: aws.Bool(true),
	})
	s.Handlers.Send.Clear()
	return s
}()

func TestSendMessageChecksum(t *testing.T) {
	req, _ := svc.SendMessageRequest(&sqs.SendMessageInput{
		MessageBody: aws.String("test"),
	})
	req.Handlers.Send.PushBack(func(r *request.Request) {
		body := ioutil.NopCloser(bytes.NewReader([]byte("")))
		r.HTTPResponse = &http.Response{StatusCode: 200, Body: body}
		r.Data = &sqs.SendMessageOutput{
			MD5OfMessageBody: aws.String("098f6bcd4621d373cade4e832627b4f6"),
			MessageId:        aws.String("12345"),

开发者ID:kuenzaa，项目名称:rack，代码行数:31，代码来源:checksums_test.go

注：本文中的github.com/convox/rack/Godeps/_workspace/src/github.com/aws/aws-sdk-go/service/sqs.New函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。