Golang util.CleanupDir函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/cockroachdb/cockroach/util.CleanupDir函数的典型用法代码示例。如果您正苦于以下问题：Golang CleanupDir函数的具体用法？Golang CleanupDir怎么用？Golang CleanupDir使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CleanupDir函数的8个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: Example_rmPerms

// Example_rmPerms creates a series of perm configs and verifies
// perm-rm works by deleting some and then all and verifying entries
// have been removed via perm-ls. Also verify the default perm config
// cannot be removed.
func Example_rmPerms() {
	_, stopper := startAdminServer()
	defer stopper.Stop()

	testConfigFn := createTestConfigFile(testPermConfig)
	defer util.CleanupDir(testConfigFn)

	keys := []proto.Key{
		proto.KeyMin,
		proto.Key("db1"),
	}

	for _, key := range keys {
		prefix := url.QueryEscape(string(key))
		RunSetPerm(testContext, prefix, testConfigFn)
	}

	for _, key := range keys {
		prefix := url.QueryEscape(string(key))
		RunRmPerm(testContext, prefix)
		RunLsPerm(testContext, "")
	}
	// Output:
	// set permission config for key prefix ""
	// set permission config for key prefix "db1"
	// [default]
	// db1
	// removed permission config for key prefix "db1"
	// [default]
}

开发者ID:chinnitv，项目名称:cockroach，代码行数:34，代码来源:permission_test.go

示例2: Example_setAndGetPerms

// Example_setAndGetPerm sets perm configs for a variety of key
// prefixes and verifies they can be fetched directly.
func Example_setAndGetPerms() {
	_, stopper := startAdminServer()
	defer stopper.Stop()

	testConfigFn := createTestConfigFile(testPermConfig)
	defer util.CleanupDir(testConfigFn)

	testData := []struct {
		prefix proto.Key
		yaml   string
	}{
		{proto.KeyMin, testPermConfig},
		{proto.Key("db1"), testPermConfig},
		{proto.Key("db 2"), testPermConfig},
		{proto.Key("\xfe"), testPermConfig},
	}

	for _, test := range testData {
		prefix := url.QueryEscape(string(test.prefix))
		RunSetPerm(testContext, prefix, testConfigFn)
		RunGetPerm(testContext, prefix)
	}
	// Output:
	// set permission config for key prefix ""
	// permission config for key prefix "":
	// read:
	// - readonly
	// - readwrite
	// write:
	// - readwrite
	// - writeonly
	//
	// set permission config for key prefix "db1"
	// permission config for key prefix "db1":
	// read:
	// - readonly
	// - readwrite
	// write:
	// - readwrite
	// - writeonly
	//
	// set permission config for key prefix "db+2"
	// permission config for key prefix "db+2":
	// read:
	// - readonly
	// - readwrite
	// write:
	// - readwrite
	// - writeonly
	//
	// set permission config for key prefix "%FE"
	// permission config for key prefix "%FE":
	// read:
	// - readonly
	// - readwrite
	// write:
	// - readwrite
	// - writeonly
}

开发者ID:chinnitv，项目名称:cockroach，代码行数:61，代码来源:permission_test.go

示例3: Example_setAndGetZone

// Example_setAndGetZone sets zone configs for a variety of key
// prefixes and verifies they can be fetched directly.
func Example_setAndGetZone() {
	_, stopper := startAdminServer()
	defer stopper.Stop()

	testConfigFn := createTestConfigFile(testZoneConfig)
	defer util.CleanupDir(testConfigFn)

	testData := []struct {
		prefix proto.Key
		yaml   string
	}{
		{proto.KeyMin, testZoneConfig},
		{proto.Key("db1"), testZoneConfig},
		{proto.Key("db 2"), testZoneConfig},
		{proto.Key("\xfe"), testZoneConfig},
	}

	for _, test := range testData {
		prefix := url.QueryEscape(string(test.prefix))
		RunSetZone(testContext, prefix, testConfigFn)
		RunGetZone(testContext, prefix)
	}
	// Output:
	// set zone config for key prefix ""
	// zone config for key prefix "":
	// replicas:
	// - attrs: [dc1, ssd]
	// - attrs: [dc2, ssd]
	// - attrs: [dc3, ssd]
	// range_min_bytes: 1048576
	// range_max_bytes: 67108864
	//
	// set zone config for key prefix "db1"
	// zone config for key prefix "db1":
	// replicas:
	// - attrs: [dc1, ssd]
	// - attrs: [dc2, ssd]
	// - attrs: [dc3, ssd]
	// range_min_bytes: 1048576
	// range_max_bytes: 67108864
	//
	// set zone config for key prefix "db+2"
	// zone config for key prefix "db+2":
	// replicas:
	// - attrs: [dc1, ssd]
	// - attrs: [dc2, ssd]
	// - attrs: [dc3, ssd]
	// range_min_bytes: 1048576
	// range_max_bytes: 67108864
	//
	// set zone config for key prefix "%FE"
	// zone config for key prefix "%FE":
	// replicas:
	// - attrs: [dc1, ssd]
	// - attrs: [dc2, ssd]
	// - attrs: [dc3, ssd]
	// range_min_bytes: 1048576
	// range_max_bytes: 67108864
}

开发者ID:chinnitv，项目名称:cockroach，代码行数:61，代码来源:zone_test.go

示例4: Example_lsPerms

// Example_lsPerms creates a series of perm configs and verifies
// perm-ls works. First, no regexp lists all perm configs. Second,
// regexp properly matches results.
func Example_lsPerms() {
	_, stopper := startAdminServer()
	defer stopper.Stop()

	testConfigFn := createTestConfigFile(testPermConfig)
	defer util.CleanupDir(testConfigFn)

	keys := []proto.Key{
		proto.KeyMin,
		proto.Key("db1"),
		proto.Key("db2"),
		proto.Key("db3"),
		proto.Key("user"),
	}

	regexps := []string{
		"",
		"db*",
		"db[12]",
	}

	for _, key := range keys {
		prefix := url.QueryEscape(string(key))
		RunSetPerm(testContext, prefix, testConfigFn)
	}

	for i, regexp := range regexps {
		fmt.Fprintf(os.Stdout, "test case %d: %q\n", i, regexp)
		if regexp == "" {
			RunLsPerm(testContext, "")
		} else {
			RunLsPerm(testContext, regexp)
		}
	}
	// Output:
	// set permission config for key prefix ""
	// set permission config for key prefix "db1"
	// set permission config for key prefix "db2"
	// set permission config for key prefix "db3"
	// set permission config for key prefix "user"
	// test case 0: ""
	// [default]
	// db1
	// db2
	// db3
	// user
	// test case 1: "db*"
	// db1
	// db2
	// db3
	// test case 2: "db[12]"
	// db1
	// db2
}

开发者ID:chinnitv，项目名称:cockroach，代码行数:57，代码来源:permission_test.go

示例5: TestGenerateCerts

// This is just the mechanics of certs generation.
func TestGenerateCerts(t *testing.T) {
	defer leaktest.AfterTest(t)()
	// Do not mock cert access for this test.
	security.ResetReadFileFn()
	defer ResetTest()

	certsDir := util.CreateTempDir(t, "certs_test")
	defer util.CleanupDir(certsDir)

	// Try certs generation with empty Certs dir argument.
	err := security.RunCreateCACert("", "", 512)
	if err == nil {
		t.Fatalf("Expected error, but got none")
	}
	err = security.RunCreateNodeCert(
		"", "", "", "",
		512, []string{"localhost"})
	if err == nil {
		t.Fatalf("Expected error, but got none")
	}

	// Try generating node certs without CA certs present.
	err = security.RunCreateNodeCert(
		filepath.Join(certsDir, security.EmbeddedCACert),
		filepath.Join(certsDir, security.EmbeddedCAKey),
		filepath.Join(certsDir, security.EmbeddedNodeCert),
		filepath.Join(certsDir, security.EmbeddedNodeKey),
		512, []string{"localhost"})
	if err == nil {
		t.Fatalf("Expected error, but got none")
	}

	// Now try in the proper order.
	err = security.RunCreateCACert(
		filepath.Join(certsDir, security.EmbeddedCACert),
		filepath.Join(certsDir, security.EmbeddedCAKey),
		512)
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}

	err = security.RunCreateNodeCert(
		filepath.Join(certsDir, security.EmbeddedCACert),
		filepath.Join(certsDir, security.EmbeddedCAKey),
		filepath.Join(certsDir, security.EmbeddedNodeCert),
		filepath.Join(certsDir, security.EmbeddedNodeKey),
		512, []string{"localhost"})
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}
}

开发者ID:CubeLite，项目名称:cockroach，代码行数:52，代码来源:certs_test.go

示例6: Example_setAndGetAccts

// Example_setAndGetAccts sets acct configs for a variety of key
// prefixes and verifies they can be fetched directly.
func Example_setAndGetAccts() {
	_, stopper := startAdminServer()
	defer stopper.Stop()

	testConfigFn := createTestConfigFile(testAcctConfig)
	defer util.CleanupDir(testConfigFn)

	testData := []struct {
		prefix proto.Key
		yaml   string
	}{
		{proto.KeyMin, testAcctConfig},
		{proto.Key("db1"), testAcctConfig},
		{proto.Key("db 2"), testAcctConfig},
		{proto.Key("\xfe"), testAcctConfig},
	}

	for _, test := range testData {
		prefix := url.QueryEscape(string(test.prefix))
		RunSetAcct(testContext, prefix, testConfigFn)
		RunGetAcct(testContext, prefix)
	}
	// Output:
	// set accounting config for key prefix ""
	// accounting config for key prefix "":
	// cluster_id: test
	//
	// set accounting config for key prefix "db1"
	// accounting config for key prefix "db1":
	// cluster_id: test
	//
	// set accounting config for key prefix "db+2"
	// accounting config for key prefix "db+2":
	// cluster_id: test
	//
	// set accounting config for key prefix "%FE"
	// accounting config for key prefix "%FE":
	// cluster_id: test
}

开发者ID:chinnitv，项目名称:cockroach，代码行数:41，代码来源:accounting_test.go

示例7: TestUseCerts

// This is a fairly high-level test of CA and node certificates.
// We construct SSL server and clients and use the generated certs.
func TestUseCerts(t *testing.T) {
	defer leaktest.AfterTest(t)()
	// Do not mock cert access for this test.
	security.ResetReadFileFn()
	defer ResetTest()
	certsDir := util.CreateTempDir(t, "certs_test")
	defer util.CleanupDir(certsDir)

	err := security.RunCreateCACert(
		filepath.Join(certsDir, security.EmbeddedCACert),
		filepath.Join(certsDir, security.EmbeddedCAKey),
		512)
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}

	err = security.RunCreateNodeCert(
		filepath.Join(certsDir, security.EmbeddedCACert),
		filepath.Join(certsDir, security.EmbeddedCAKey),
		filepath.Join(certsDir, security.EmbeddedNodeCert),
		filepath.Join(certsDir, security.EmbeddedNodeKey),
		512, []string{"127.0.0.1"})
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}

	err = security.RunCreateClientCert(
		filepath.Join(certsDir, security.EmbeddedCACert),
		filepath.Join(certsDir, security.EmbeddedCAKey),
		filepath.Join(certsDir, security.EmbeddedRootCert),
		filepath.Join(certsDir, security.EmbeddedRootKey),
		512, security.RootUser)
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}

	// Load TLS Configs. This is what TestServer and HTTPClient do internally.
	_, err = security.LoadServerTLSConfig(
		filepath.Join(certsDir, security.EmbeddedCACert),
		filepath.Join(certsDir, security.EmbeddedNodeCert),
		filepath.Join(certsDir, security.EmbeddedNodeKey))
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}
	_, err = security.LoadClientTLSConfig(
		filepath.Join(certsDir, security.EmbeddedCACert),
		filepath.Join(certsDir, security.EmbeddedNodeCert),
		filepath.Join(certsDir, security.EmbeddedNodeKey))
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}

	// Start a test server and override certs.
	// We use a real context since we want generated certs.
	params := base.TestServerArgs{
		SSLCA:      filepath.Join(certsDir, security.EmbeddedCACert),
		SSLCert:    filepath.Join(certsDir, security.EmbeddedNodeCert),
		SSLCertKey: filepath.Join(certsDir, security.EmbeddedNodeKey),
	}
	s, _, _ := serverutils.StartServer(t, params)
	defer s.Stopper().Stop()

	// Insecure mode.
	clientContext := testutils.NewNodeTestBaseContext()
	clientContext.Insecure = true
	httpClient, err := clientContext.GetHTTPClient()
	if err != nil {
		t.Fatal(err)
	}
	req, err := http.NewRequest("GET", s.AdminURL()+"/_admin/v1/health", nil)
	if err != nil {
		t.Fatalf("could not create request: %v", err)
	}
	resp, err := httpClient.Do(req)
	if err == nil {
		resp.Body.Close()
		t.Fatalf("Expected SSL error, got success")
	}

	// Secure mode but no Certs: permissive config.
	clientContext = testutils.NewNodeTestBaseContext()
	clientContext.Insecure = false
	clientContext.SSLCert = ""
	httpClient, err = clientContext.GetHTTPClient()
	if err != nil {
		t.Fatal(err)
	}
	// Endpoint that does not enforce client auth (see: server/authentication_test.go)
	req, err = http.NewRequest("GET", s.AdminURL()+"/_admin/v1/health", nil)
	if err != nil {
		t.Fatalf("could not create request: %v", err)
	}
	resp, err = httpClient.Do(req)
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}
	resp.Body.Close()
	if resp.StatusCode != http.StatusOK {
//.........这里部分代码省略.........

开发者ID:CubeLite，项目名称:cockroach，代码行数:101，代码来源:certs_test.go

示例8: TestUseCerts

// This is a fairly high-level test of CA and node certificates.
// We construct SSL server and clients and use the generated certs.
func TestUseCerts(t *testing.T) {
	defer leaktest.AfterTest(t)
	// Do not mock cert access for this test.
	security.ResetReadFileFn()
	defer ResetTest()
	certsDir := util.CreateTempDir(t, "certs_test")
	defer util.CleanupDir(certsDir)

	err := security.RunCreateCACert(certsDir, 512)
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}

	err = security.RunCreateNodeCert(certsDir, 512, []string{"127.0.0.1"})
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}

	err = security.RunCreateClientCert(certsDir, 512, security.RootUser)
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}

	// Load TLS Configs. This is what TestServer and HTTPClient do internally.
	_, err = security.LoadServerTLSConfig(certsDir, "node")
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}
	_, err = security.LoadClientTLSConfig(certsDir, security.NodeUser)
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}

	// Start a test server and override certs.
	// We use a real context since we want generated certs.
	testCtx := server.NewContext()
	testCtx.Certs = certsDir
	testCtx.User = security.NodeUser
	testCtx.Addr = "127.0.0.1:0"
	testCtx.PGAddr = "127.0.0.1:0"
	s := &server.TestServer{Ctx: testCtx}
	if err := s.Start(); err != nil {
		t.Fatal(err)
	}
	defer s.Stop()

	// Insecure mode.
	clientContext := testutils.NewNodeTestBaseContext()
	clientContext.Insecure = true
	httpClient, err := clientContext.GetHTTPClient()
	if err != nil {
		t.Fatal(err)
	}
	req, err := http.NewRequest("GET", "https://"+s.ServingAddr()+"/_admin/health", nil)
	if err != nil {
		t.Fatalf("could not create request: %v", err)
	}
	resp, err := httpClient.Do(req)
	if err == nil {
		resp.Body.Close()
		t.Fatalf("Expected SSL error, got success")
	}

	// Secure mode but no Certs directory: permissive config.
	clientContext = testutils.NewNodeTestBaseContext()
	clientContext.Certs = ""
	httpClient, err = clientContext.GetHTTPClient()
	if err != nil {
		t.Fatal(err)
	}
	// Endpoint that does not enforce client auth (see: server/authentication_test.go)
	req, err = http.NewRequest("GET", "https://"+s.ServingAddr()+"/_admin/health", nil)
	if err != nil {
		t.Fatalf("could not create request: %v", err)
	}
	resp, err = httpClient.Do(req)
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}
	resp.Body.Close()
	if resp.StatusCode != http.StatusOK {
		t.Fatalf("Expected OK, got: %d", resp.StatusCode)
	}

	// Endpoint that enforces client auth (see: server/authentication_test.go)
	req, err = http.NewRequest("GET", "https://"+s.ServingAddr()+driver.Endpoint, nil)
	if err != nil {
		t.Fatalf("could not create request: %v", err)
	}
	resp, err = httpClient.Do(req)
	if err != nil {
		t.Fatalf("Expected success, got %v", err)
	}
	resp.Body.Close()
	if resp.StatusCode != http.StatusUnauthorized {
		t.Fatalf("Expected status code %d, got: %d", http.StatusUnauthorized, resp.StatusCode)
	}

//.........这里部分代码省略.........

开发者ID:kaustubhkurve，项目名称:cockroach，代码行数:101，代码来源:certs_test.go

注：本文中的github.com/cockroachdb/cockroach/util.CleanupDir函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。