• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Golang metrics.SendValue函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Golang中github.com/cloudfoundry/dropsonde/metrics.SendValue函数的典型用法代码示例。如果您正苦于以下问题:Golang SendValue函数的具体用法?Golang SendValue怎么用?Golang SendValue使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了SendValue函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: CaptureRoutingResponse

func (m *MetricsReporter) CaptureRoutingResponse(b *route.Endpoint, res *http.Response, t time.Time, d time.Duration) {
	dropsondeMetrics.BatchIncrementCounter(getResponseCounterName(res))
	dropsondeMetrics.BatchIncrementCounter("responses")

	latency := float64(d / time.Millisecond)
	unit := "ms"
	dropsondeMetrics.SendValue("latency", latency, unit)

	componentName, ok := b.Tags["component"]
	if ok && len(componentName) > 0 {
		dropsondeMetrics.SendValue(fmt.Sprintf("latency.%s", componentName), latency, unit)
	}
}
开发者ID:idouba,项目名称:gorouter,代码行数:13,代码来源:metrics_reporter.go


示例2: Dec

func (s *SinkManagerMetrics) Dec(sink sinks.Sink) {
	switch sink.(type) {
	case *dump.DumpSink:
		dumpSinks := atomic.AddInt32(&s.dumpSinks, -1)
		metrics.SendValue("messageRouter.numberOfDumpSinks", float64(dumpSinks), "sinks")

	case *syslog.SyslogSink:
		syslogSinks := atomic.AddInt32(&s.syslogSinks, -1)
		metrics.SendValue("messageRouter.numberOfSyslogSinks", float64(syslogSinks), "sinks")

	case *websocket.WebsocketSink:
		websocketSinks := atomic.AddInt32(&s.websocketSinks, -1)
		metrics.SendValue("messageRouter.numberOfWebsocketSinks", float64(websocketSinks), "sinks")
	}
}
开发者ID:rakutentech,项目名称:loggregator,代码行数:15,代码来源:sink_manager_metrics.go


示例3: emitMetric

func emitMetric(event observer.AddressChange) {
	if event.New == "" {
		return
	}

	key := getKey(event, "changed")
	metrics.SendValue(key, 1, "count")
}
开发者ID:st3v,项目名称:arp-watch,代码行数:8,代码来源:main.go


示例4: Dec

func (sinkManagerMetrics *SinkManagerMetrics) Dec(sink sinks.Sink) {
	sinkManagerMetrics.lock.Lock()
	defer sinkManagerMetrics.lock.Unlock()

	switch sink.(type) {
	case *dump.DumpSink:
		sinkManagerMetrics.dumpSinks--
		metrics.SendValue("messageRouter.numberOfDumpSinks", float64(sinkManagerMetrics.dumpSinks), "sinks")

	case *syslog.SyslogSink:
		sinkManagerMetrics.syslogSinks--
		metrics.SendValue("messageRouter.numberOfSyslogSinks", float64(sinkManagerMetrics.syslogSinks), "sinks")

	case *websocket.WebsocketSink:
		sinkManagerMetrics.websocketSinks--
		metrics.SendValue("messageRouter.numberOfWebsocketSinks", float64(sinkManagerMetrics.websocketSinks), "sinks")
	}
}
开发者ID:khj0651,项目名称:loggregator,代码行数:18,代码来源:sink_manager_metrics.go


示例5: processInstancesJson

func (agent *Agent) processInstancesJson() {
	currentTasks, err := agent.readInstancesJson()
	metrics.SendValue("totalApps", float64(len(currentTasks)), "apps")
	if err != nil {
		return
	}

	agent.knownInstancesChan <- agent.processTasks(currentTasks)
}
开发者ID:khj0651,项目名称:loggregator,代码行数:9,代码来源:agent.go


示例6: EmitMetric

func (c *client) EmitMetric(m *metric) error {

	err := dmetrics.SendValue(m.Name, m.Value, m.Unit)

	if err != nil {
		return fmt.Errorf("Error emitting metric %v", m)
	}
	return nil
}
开发者ID:benlaplanche,项目名称:emitter,代码行数:9,代码来源:redis.go


示例7: Start

func (u *UptimeMonitor) Start() {
	ticker := time.NewTicker(u.interval)

	for {
		select {
		case <-ticker.C:
			metrics.SendValue("Uptime", float64(time.Now().Unix()-u.started), "seconds")
		case stopped := <-u.doneChan:
			ticker.Stop()
			close(stopped)
			return
		}
	}
}
开发者ID:lyuyun,项目名称:loggregator,代码行数:14,代码来源:uptime_monitor.go


示例8: Start

func (u *UptimeMonitor) Start() {
	ticker := time.NewTicker(u.interval)
	u.wg.Add(1)
	defer u.wg.Done()

	for {
		select {
		case <-ticker.C:
			metrics.SendValue("Uptime", float64(time.Now().Unix()-u.started), "seconds")
		case <-u.doneChan:
			ticker.Stop()
			return
		}
	}
}
开发者ID:rakutentech,项目名称:loggregator,代码行数:15,代码来源:uptime_monitor.go


示例9: pollInstancesJson

func (agent *Agent) pollInstancesJson() {
	defer agent.Done()

	watcher, err := fsnotify.NewWatcher()
	if err != nil {
		panic(err)
	}

	for {
		time.Sleep(100 * time.Millisecond)
		err := watcher.Watch(path.Dir(agent.InstancesJsonFilePath))
		if err != nil {
			agent.logger.Warnf("Reading failed, retrying. %s\n", err)
			continue
		}
		break
	}

	agent.logger.Info("Read initial tasks data")
	agent.processInstancesJson()

	for {
		select {
		case ev := <-watcher.Event:
			agent.logger.Debugf("Got Event: %v\n", ev)
			if ev.IsDelete() {
				agent.knownInstancesChan <- resetCache
				metrics.SendValue("totalApps", 0.0, "apps")
			} else {
				agent.processInstancesJson()
			}
		case err := <-watcher.Error:
			agent.logger.Warnf("Received error from file system notification: %s\n", err)
		case <-agent.stopChan:
			return
		}
	}
}
开发者ID:khj0651,项目名称:loggregator,代码行数:38,代码来源:agent.go


示例10: Start

func (l *LinuxFileDescriptor) Start() {
	l.logger.Info("Starting Open File Descriptor Monitor...")

	ticker := time.NewTicker(l.interval)
	l.logger.Infof("Starting FD monitor with pid %d", os.Getpid())
	path := fmt.Sprintf("/proc/%d/fd", os.Getpid())

	for {
		select {
		case <-ticker.C:
			finfos, err := ioutil.ReadDir(path)
			if err != nil {
				l.logger.Errorf("Could not read pid dir %s: %s", path, err)
				break
			}

			metrics.SendValue("LinuxFileDescriptor", float64(symlinks(finfos)), "File")
		case stopped := <-l.done:
			ticker.Stop()
			close(stopped)
			return
		}
	}
}
开发者ID:kei-yamazaki,项目名称:loggregator,代码行数:24,代码来源:openfd.go


示例11: CaptureRouteStats

func (c *MetricsReporter) CaptureRouteStats(totalRoutes int, msSinceLastUpdate uint64) {
	dropsondeMetrics.SendValue("total_routes", float64(totalRoutes), "")
	dropsondeMetrics.SendValue("ms_since_last_registry_update", float64(msSinceLastUpdate), "ms")
}
开发者ID:idouba,项目名称:gorouter,代码行数:4,代码来源:metrics_reporter.go


示例12: Send

func (name Duration) Send(duration time.Duration) {
	dropsonde_metrics.SendValue(string(name), float64(duration), "nanos")
}
开发者ID:nagyistoce,项目名称:garden-linux,代码行数:3,代码来源:periodic_metron_notifier.go


示例13: DecFirehose

func (sinkManagerMetrics *SinkManagerMetrics) DecFirehose() {
	sinkManagerMetrics.lock.Lock()
	defer sinkManagerMetrics.lock.Unlock()
	sinkManagerMetrics.firehoseSinks--
	metrics.SendValue("messageRouter.numberOfFirehoseSinks", float64(sinkManagerMetrics.firehoseSinks), "sinks")
}
开发者ID:khj0651,项目名称:loggregator,代码行数:6,代码来源:sink_manager_metrics.go


示例14: sendMetric

func sendMetric(metricName string, startTime time.Time) {
	elapsedMillisecond := float64(time.Since(startTime)) / float64(time.Millisecond)
	metrics.SendValue(fmt.Sprintf("dopplerProxy.%sLatency", metricName), elapsedMillisecond, "ms")
}
开发者ID:lyuyun,项目名称:loggregator,代码行数:4,代码来源:doppler_proxy.go


示例15:

						defer lock.Unlock()
						receivedEvents[eventId] = true
					}()
				}
			}()

			httpListener, err := net.Listen("tcp", "localhost:0")
			Expect(err).ToNot(HaveOccurred())
			defer httpListener.Close()
			httpHandler := dropsonde.InstrumentedHandler(FakeHandler{})
			go http.Serve(httpListener, httpHandler)

			_, err = http.Get("http://" + httpListener.Addr().String())
			Expect(err).ToNot(HaveOccurred())

			metrics.SendValue("TestMetric", 0, "")
			metrics.IncrementCounter("TestIncrementCounter")

			expectedEventTypes := []string{"HttpStartClient", "HttpStartServer", "HttpStopServer", "HttpStopClient", "ValueMetricnumCPUS", "ValueMetricTestMetric", "CounterEventTestIncrementCounter"}

			for _, eventType := range expectedEventTypes {
				Eventually(func() bool {
					lock.RLock()
					defer lock.RUnlock()
					_, ok := receivedEvents[eventType]
					return ok
				}).Should(BeTrue(), fmt.Sprintf("missing %s", eventType))
			}

			heartbeatUuid := heartbeatRequest.GetIdentifier().String()
			Eventually(heartbeatUuidsChan).Should(Receive(Equal(heartbeatUuid)))
开发者ID:jungle0755,项目名称:gorouter,代码行数:31,代码来源:dropsonde_end_to_end_test.go


示例16: Send

func (name Requests) Send(value int) error {
	return metrics.SendValue(string(name), float64(value), "Req")
}
开发者ID:cfibmers,项目名称:runtime-schema,代码行数:3,代码来源:metric.go


示例17: CaptureLookupTime

func (c *MetricsReporter) CaptureLookupTime(t time.Duration) {
	unit := "ns"
	dropsondeMetrics.SendValue("route_lookup_time", float64(t.Nanoseconds()), unit)
}
开发者ID:cloudfoundry,项目名称:gorouter,代码行数:4,代码来源:metrics_reporter.go


示例18: main

func main() {
	flag.Parse()
	config, logger := parseConfig(*debug, *configFile, *logFilePath)

	dropsonde.Initialize(config.MetronAddress, "syslog_drain_binder")

	workPool, err := workpool.NewWorkPool(config.EtcdMaxConcurrentRequests)
	if err != nil {
		panic(err)
	}

	adapter := etcdstoreadapter.NewETCDStoreAdapter(config.EtcdUrls, workPool)

	updateInterval := time.Duration(config.UpdateIntervalSeconds) * time.Second
	politician := elector.NewElector(config.InstanceName, adapter, updateInterval, logger)

	drainTTL := time.Duration(config.DrainUrlTtlSeconds) * time.Second
	store := etcd_syslog_drain_store.NewEtcdSyslogDrainStore(adapter, drainTTL, logger)

	ticker := time.NewTicker(updateInterval)
	for {
		select {
		case <-cfcomponent.RegisterGoRoutineDumpSignalChannel():
			cfcomponent.DumpGoRoutine()
		case <-ticker.C:
			if politician.IsLeader() {
				err = politician.StayAsLeader()
				if err != nil {
					logger.Errorf("Error when staying leader: %s", err.Error())
					politician.Vacate()
					continue
				}
			} else {
				err = politician.RunForElection()

				if err != nil {
					logger.Errorf("Error when running for leader: %s", err.Error())
					politician.Vacate()
					continue
				}
			}

			logger.Debugf("Polling %s for updates", config.CloudControllerAddress)
			drainUrls, err := Poll(config.CloudControllerAddress, config.BulkApiUsername, config.BulkApiPassword, config.PollingBatchSize, config.SkipCertVerify)
			if err != nil {
				logger.Errorf("Error when polling cloud controller: %s", err.Error())
				politician.Vacate()
				continue
			}

			metrics.IncrementCounter("pollCount")

			var totalDrains int
			for _, drainList := range drainUrls {
				totalDrains += len(drainList)
			}

			metrics.SendValue("totalDrains", float64(totalDrains), "drains")

			logger.Debugf("Updating drain URLs for %d application(s)", len(drainUrls))
			err = store.UpdateDrains(drainUrls)
			if err != nil {
				logger.Errorf("Error when updating ETCD: %s", err.Error())
				politician.Vacate()
				continue
			}
		}
	}
}
开发者ID:rakutentech,项目名称:loggregator,代码行数:69,代码来源:main.go


示例19: DecFirehose

func (s *SinkManagerMetrics) DecFirehose() {
	firehoseSinks := atomic.AddInt32(&s.firehoseSinks, -1)
	metrics.SendValue("messageRouter.numberOfFirehoseSinks", float64(firehoseSinks), "sinks")
}
开发者ID:rakutentech,项目名称:loggregator,代码行数:4,代码来源:sink_manager_metrics.go


示例20:

	. "github.com/onsi/ginkgo"
	. "github.com/onsi/gomega"
	"time"
)

var _ = Describe("Metrics", func() {
	var fakeMetricSender *fake.FakeMetricSender

	BeforeEach(func() {
		fakeMetricSender = fake.NewFakeMetricSender()
		metricBatcher := metricbatcher.New(fakeMetricSender, time.Millisecond)
		metrics.Initialize(fakeMetricSender, metricBatcher)
	})

	It("delegates SendValue", func() {
		metrics.SendValue("metric", 42.42, "answers")

		Expect(fakeMetricSender.GetValue("metric").Value).To(Equal(42.42))
		Expect(fakeMetricSender.GetValue("metric").Unit).To(Equal("answers"))
	})

	It("delegates IncrementCounter", func() {
		metrics.IncrementCounter("count")

		Expect(fakeMetricSender.GetCounter("count")).To(BeEquivalentTo(1))

		metrics.IncrementCounter("count")

		Expect(fakeMetricSender.GetCounter("count")).To(BeEquivalentTo(2))
	})
开发者ID:benlaplanche,项目名称:emitter,代码行数:30,代码来源:metrics_test.go



注:本文中的github.com/cloudfoundry/dropsonde/metrics.SendValue函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Golang fileutils.CopyPathToPath函数代码示例发布时间:2022-05-23
下一篇:
Golang metrics.Initialize函数代码示例发布时间:2022-05-23
热门推荐
热门话题
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap