C# Lcgl.frmModleFjly类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› c#›C#教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C#中Ebada.Scgl.Lcgl.frmModleFjly类的典型用法代码示例。如果您正苦于以下问题：C# frmModleFjly类的具体用法？C# frmModleFjly怎么用？C# frmModleFjly使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

frmModleFjly类属于Ebada.Scgl.Lcgl命名空间，在下文中一共展示了frmModleFjly类的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C#代码示例。

示例1: barFJLY_ItemClick

 private void barFJLY_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
 {
     if (fjly == null) fjly = new frmModleFjly();
     fjly.CurrRecord = currRecord;
     fjly.RecordWorkFlowData = WorkFlowData;
     fjly.Kind = currRecord.Kind;
     fjly.Status = RecordWorkTask.GetWorkTaskStatus(WorkFlowData, currRecord);
     fjly.ShowDialog();
 }

开发者ID:s7loves，项目名称:mypowerscgl，代码行数:9，代码来源:UCPJ_CQCSSQK.cs

示例2: TaskOverButton_ItemClick

        private void TaskOverButton_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
        {

            //请求确认
            if (MsgBox.ShowAskMessageBox("是否确认此节点结束，并进入下一流程?") != DialogResult.OK)
            {
                //SendMessage(this.Handle, 0x0010, (IntPtr)0, (IntPtr)0);
                return;
            }
            string strmes = "";

            if (RecordWorkTask.CheckOnRiZhi(WorkFlowData))
            {

                RecordWorkTask.CreatRiZhi(WorkFlowData, null, currRecord.ID, new object[] { currRecord });

            }
            WF_WorkTaskCommands wt = (WF_WorkTaskCommands)MainHelper.PlatformSqlMap.GetObject("SelectWF_WorkTaskCommandsList", " where WorkFlowId='" + WorkFlowData.Rows[0]["WorkFlowId"].ToString() + "' and WorkTaskId='" + WorkFlowData.Rows[0]["WorkTaskId"].ToString() + "'");
            if (wt != null)
            {
                strmes = RecordWorkTask.RunWorkFlow(MainHelper.User.UserID, WorkFlowData.Rows[0]["OperatorInsId"].ToString(), WorkFlowData.Rows[0]["WorkTaskInsId"].ToString(), wt.CommandName);
            }
            else
            {
                strmes = RecordWorkTask.RunWorkFlow(MainHelper.User.UserID, WorkFlowData.Rows[0]["OperatorInsId"].ToString(), WorkFlowData.Rows[0]["WorkTaskInsId"].ToString(), "提交");
            }
            if (strmes.IndexOf("未提交至任何人") > -1)
            {
                MsgBox.ShowTipMessageBox("未提交至任何人,创建失败,请检查流程模板和组织机构配置是否正确!");
                return;
            }
            else
                MsgBox.ShowTipMessageBox(strmes);
            if (fjly == null) fjly = new frmModleFjly();
            fjly.btn_Submit_Click(sender, e);
            strmes = RecordWorkTask.GetWorkFlowTaskCaption(WorkFlowData.Rows[0]["WorkTaskInsId"].ToString());
            if (strmes == "结束节点1")
            {
                currRecord.Status = "存档";
            }
            else
            {
                currRecord.Status = strmes;
            }
            currRecord.LastChangeTime = DateTime.Now.ToString();
            if (currRecord.ImageAttachment == null) currRecord.ImageAttachment = new byte[0];
            if (currRecord.SignImg == null) currRecord.SignImg = new byte[0];
            MainHelper.PlatformSqlMap.Update("UpdateLP_Record", CurrRecord);
            gridControl1.FindForm().Close();
        }

开发者ID:s7loves，项目名称:mypowerscgl，代码行数:50，代码来源:UCPJ_CQCSSQK.cs

示例3: UCSCTZ

 public UCSCTZ()
 {
     InitializeComponent();
     initImageList();
     gridViewOperation = new GridViewOperation<PJ_clcrkd>(gridControl1, gridView1, barManager1, new frmSCTZEdit());
     gridViewOperation.BeforeAdd += new ObjectOperationEventHandler<PJ_clcrkd>(gridViewOperation_BeforeAdd);
     gridViewOperation.CreatingObjectEvent += gridViewOperation_CreatingObjectEvent;
     gridViewOperation.AfterAdd += new ObjectEventHandler<PJ_clcrkd>(gridViewOperation_AfterAdd);
     gridViewOperation.AfterDelete += new ObjectEventHandler<PJ_clcrkd>(gridViewOperation_AfterDelete);
     gridViewOperation.BeforeDelete += new ObjectOperationEventHandler<PJ_clcrkd>(gridViewOperation_BeforeDelete);
     gridView1.FocusedRowChanged += gridView1_FocusedRowChanged;
     if (isWorkflowCall && fjly==null)
     {
         fjly = new frmModleFjly();
     }
 }

开发者ID:s7loves，项目名称:mypowerscgl，代码行数:16，代码来源:UCSCTZ.cs

示例4: SubmitButton_ItemClick

        private void SubmitButton_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
        {
            frmModleSubmit fm = new frmModleSubmit();
            fm.RecordWorkFlowData = WorkFlowData;
            fm.CurrRecord = currRecord;
            if (currRecord.Status == "申报")
                fm.Status = "add";
            else
                fm.Status = "edit";
            fm.Kind = currRecord.Kind;
            frmProjectSelect fys = new frmProjectSelect();
            fys.strType = " and (type = '工程材料出库单' ) ";
            fys.StrSQL = "select distinct ssgc  from PJ_clcrkd where  (type = '工程材料出库单' ) ";
            if (fys.ShowDialog() == DialogResult.OK)
            {
                ExportCLCKEdit export = new ExportCLCKEdit();
                export.CurrRecord = currRecord;
                export.IsWorkflowCall = isWorkflowCall;
                export.ParentTemple = parentTemple;
                export.RecordWorkFlowData = WorkFlowData;

                export.ExportExcelSubmit(ref parentTemple, "", fys.strProject, fys.strFenproject, false);

                fm.ParentTemple = parentTemple;
                if (fm.ShowDialog() == DialogResult.OK)
                {
                    if (fjly == null) fjly = new frmModleFjly();
                    fjly.btn_Submit_Click(sender, e);
                    if (MainHelper.UserOrg.OrgName.IndexOf("局") == -1)
                        export.ExportExceljhbAllSubmitToWF_ModleRecordWorkTaskIns("", fys.strProject, fys.strFenproject);
                    else
                        export.ExportExceljhbAllSubmitToWF_ModleRecordWorkTaskIns("", fys.strProject, fys.strFenproject);
                    gridControl1.FindForm().Close();
                }
            }
        }

开发者ID:s7loves，项目名称:mypowerscgl，代码行数:36，代码来源:UCCLCK.cs

示例5: SubmitButton_ItemClick

        private void SubmitButton_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
        {
            frmModleSubmit fm = new frmModleSubmit();
            fm.RecordWorkFlowData = WorkFlowData;
            fm.CurrRecord = currRecord;
            if (currRecord.Status == "申报")
                fm.Status = "add";
            else
                fm.Status = "edit";
            fm.Kind = currRecord.Kind;


            ExportSBBZQSBGMXB2Edit export = new ExportSBBZQSBGMXB2Edit();
                export.CurrRecord = currRecord;
                export.IsWorkflowCall = isWorkflowCall;
                export.ParentTemple = parentTemple;
                export.RecordWorkFlowData = WorkFlowData;

                export.ExportExcelSubmit(ref parentTemple, parentID,  false);

                fm.ParentTemple = parentTemple;
                if (fm.ShowDialog() == DialogResult.OK)
                {
                    if (fjly == null) fjly = new frmModleFjly();
                    fjly.btn_Submit_Click(sender, e);
                    if (MainHelper.UserOrg.OrgName.IndexOf("局") == -1)
                        export.ExportExceljhbAllSubmitToWF_ModleRecordWorkTaskIns(parentID);
                    else
                        export.ExportExceljhbAllSubmitToWF_ModleRecordWorkTaskIns(parentID);
                    gridControl1.FindForm().Close();
                }
            
        }

开发者ID:s7loves，项目名称:mypowerscgl，代码行数:33，代码来源:UCSBBZQSBGMXB2.cs

示例6: UCGDSRK

 public UCGDSRK()
 {
     InitializeComponent();
     initImageList();
     gridViewOperation = new GridViewOperation<PJ_gdscrk>(gridControl1, gridView1, barManager1, frm);
     gridViewOperation.BeforeAdd += new ObjectOperationEventHandler<PJ_gdscrk>(gridViewOperation_BeforeAdd);
     gridViewOperation.CreatingObjectEvent += gridViewOperation_CreatingObjectEvent;
     gridViewOperation.AfterAdd += new ObjectEventHandler<PJ_gdscrk>(gridViewOperation_AfterAdd);
     gridViewOperation.AfterDelete += new ObjectEventHandler<PJ_gdscrk>(gridViewOperation_AfterDelete);
     gridViewOperation.BeforeDelete += new ObjectOperationEventHandler<PJ_gdscrk>(gridViewOperation_BeforeDelete);
     gridViewOperation.BeforeDelete += new ObjectOperationEventHandler<PJ_gdscrk>(gridViewOperation_BeforeDelete);
     if (isWorkflowCall && fjly == null)
     {
         fjly = new frmModleFjly();
     }
 }

开发者ID:s7loves，项目名称:mypowerscgl，代码行数:16，代码来源:UCGDSRK.cs

示例7: barxqjh_ItemClick

        private void barxqjh_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
        {
            //请求确认
            if (MsgBox.ShowAskMessageBox("是否确认此节点结束，生成消缺计划并进入下一流程?") != DialogResult.OK)
            {
                //SendMessage(this.Handle, 0x0010, (IntPtr)0, (IntPtr)0);
                return;
            }
            string slqwhere = "where OrgCode='" + parentID + "' ";
            slqwhere = slqwhere + " and id not in (select ModleRecordID from WF_ModleRecordWorkTaskIns where RecordID='" + CurrRecord.ID + "'";
            slqwhere = slqwhere + " and  WorkFlowId='" + WorkFlowData.Rows[0]["WorkFlowId"].ToString() + "'"
                   + " and  WorkFlowInsId='" + WorkFlowData.Rows[0]["WorkFlowInsId"].ToString() + "'"
                   + " and  WorkTaskId='" + WorkFlowData.Rows[0]["WorkTaskId"].ToString() + "'"
                   + " and  WorkTaskInsId='" + WorkFlowData.Rows[0]["WorkTaskInsId"].ToString() + "')"
             + " and DATEDIFF(day,cast('1900-1-1'  as datetime ) ,cast(xcrq  as datetime) )<1 ";
            slqwhere += " order by id desc";
            dalist = MainHelper.PlatformSqlMap.GetListByWhere<PJ_06sbxs>(slqwhere);
            string strmes = "";

            if (RecordWorkTask.CheckOnRiZhi(WorkFlowData))
            {

                RecordWorkTask.CreatRiZhi(WorkFlowData, null, currRecord.ID, new object[] { currRecord });

            }

            WF_WorkTaskCommands wt = (WF_WorkTaskCommands)MainHelper.PlatformSqlMap.GetObject("SelectWF_WorkTaskCommandsList", " where WorkFlowId='" + WorkFlowData.Rows[0]["WorkFlowId"].ToString() + "' and WorkTaskId='" + WorkFlowData.Rows[0]["WorkTaskId"].ToString() + "'");
            if (wt != null)
            {
                strmes = RecordWorkTask.RunWorkFlow(MainHelper.User.UserID, WorkFlowData.Rows[0]["OperatorInsId"].ToString(), WorkFlowData.Rows[0]["WorkTaskInsId"].ToString(), wt.CommandName);
            }
            else
            {
                strmes = RecordWorkTask.RunWorkFlow(MainHelper.User.UserID, WorkFlowData.Rows[0]["OperatorInsId"].ToString(), WorkFlowData.Rows[0]["WorkTaskInsId"].ToString(), "提交");
            }
            if (strmes.IndexOf("未提交至任何人") > -1)
            {
                MsgBox.ShowTipMessageBox("未提交至任何人,创建失败,请检查流程模板和组织机构配置是否正确!");
                return;
            }
            else
                MsgBox.ShowTipMessageBox(strmes);
            if (fjly == null) fjly = new frmModleFjly();
            fjly.btn_Submit_Click(sender, e);
            strmes = RecordWorkTask.GetWorkFlowTaskCaption(WorkFlowData.Rows[0]["WorkTaskInsId"].ToString());
            if (strmes == "结束节点1")
            {
                currRecord.Status = "存档";
            }
            else
            {
                currRecord.Status = strmes;
            }
            currRecord.LastChangeTime = DateTime.Now.ToString();
            if (currRecord.ImageAttachment == null) currRecord.ImageAttachment = new byte[0];
            if (currRecord.SignImg == null) currRecord.SignImg = new byte[0];
            MainHelper.PlatformSqlMap.Update("UpdateLP_Record", CurrRecord);

            DataTable dt = RecordWorkTask.GetRecordWorkFlowData(currRecord.ID, MainHelper.User.UserID);
            slqwhere = "where OrgCode='" + parentID + "' ";
            slqwhere = slqwhere + " and (id not in (select ModleRecordID from WF_ModleRecordWorkTaskIns where 1=1 ";
            slqwhere = slqwhere + " and  WorkFlowId='" + WorkFlowData.Rows[0]["WorkFlowId"].ToString() + "'"

               + " and  WorkTaskId='" + WorkFlowData.Rows[0]["WorkTaskId"].ToString() + "') "
               + " or (id  in (select ModleRecordID from WF_ModleRecordWorkTaskIns where 1=1 ";
            slqwhere = slqwhere + " and  RecordID='" + currRecord.ID + "'"
              + " and  WorkFlowInsId='" + WorkFlowData.Rows[0]["WorkFlowInsId"].ToString() + "' "
              + " and  WorkTaskInsId='" + WorkFlowData.Rows[0]["WorkTaskInsId"].ToString() + "' "
               + " and  WorkTaskId='" + WorkFlowData.Rows[0]["WorkTaskId"].ToString() + "')) "
              + ")"
              ;

            slqwhere += " order by id desc";
            dalist = MainHelper.PlatformSqlMap.GetListByWhere<PJ_06sbxs>(slqwhere);
            foreach (PJ_06sbxs sbxs in dalist)
            {
                if (sbxs.qxlb == "") continue;
                WF_ModleRecordWorkTaskIns mrwt = new WF_ModleRecordWorkTaskIns();
                PJ_qxfl qxfj = new PJ_qxfl();
                if (WorkFlowData.Rows[0]["flowcaption"].ToString() == "春查消缺外查")
                {
                    PJ_ccxqjh ccxqjh = new PJ_ccxqjh();
                    ccxqjh.ID = sbxs.ID;
                    ccxqjh.OrgCode = sbxs.OrgCode;
                    ccxqjh.OrgName = sbxs.OrgName;
                    ccxqjh.qxlb = sbxs.qxlb;
                    ccxqjh.xqlr = sbxs.qxnr;
                    Thread.Sleep(new TimeSpan(100000));//0.1毫秒
                    try
                    {
                        MainHelper.PlatformSqlMap.Create<PJ_ccxqjh>(ccxqjh);
                    }
                    catch { }
                    qxfj.ID = ccxqjh.ID;

                    mrwt.ID = mrwt.CreateID();
                    mrwt.ModleRecordID = ccxqjh.ID;
                    mrwt.RecordID = currRecord.ID;
                    mrwt.WorkFlowId = dt.Rows[0]["WorkFlowId"].ToString();
                    mrwt.WorkFlowInsId = dt.Rows[0]["WorkFlowInsId"].ToString();
//.........这里部分代码省略.........

开发者ID:s7loves，项目名称:mypowerscgl，代码行数:101，代码来源:UCPJ_cq06sbxsmain.cs

注：本文中的Ebada.Scgl.Lcgl.frmModleFjly类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C# Model.WF_ModleRecordWorkTaskIns类代码示例发布时间：2022-05-24

C# Mocking.MockBuilder类代码示例发布时间：2022-05-24

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19127|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9971|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8626|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8640|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C# Lcgl.frmModleFjly类代码示例

示例1: barFJLY_ItemClick

示例2: TaskOverButton_ItemClick

示例3: UCSCTZ

示例4: SubmitButton_ItemClick

示例5: SubmitButton_ItemClick

示例6: UCGDSRK

示例7: barxqjh_ItemClick

请发表评论

全部评论

上一篇：

下一篇：

5. matlab入门——图形标注、特殊绘图、三

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053