C# Models.PortId类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› c#›C#教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C#中Dynamo.Models.PortId类的典型用法代码示例。如果您正苦于以下问题：C# PortId类的具体用法？C# PortId怎么用？C# PortId使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

PortId类属于Dynamo.Models命名空间，在下文中一共展示了PortId类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C#代码示例。

示例1: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migrationData = new NodeMigrationData(data.Document);

            // Create DSFunction node
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);

            var converterNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(converterNode, "DSCoreNodes.dll",
                "Math.DegreesToRadians", "[email protected]");
            migrationData.AppendNode(converterNode);
            string converterNodeId = MigrationManager.GetGuidFromXmlElement(converterNode);

            // Create new node
            XmlElement acosNode = MigrationManager.CreateFunctionNode(
                data.Document, "DSCoreNodes.dll",
                "Math.Acos", "[email protected]");
            migrationData.AppendNode(acosNode);
            string acosNodeId = MigrationManager.GetGuidFromXmlElement(acosNode);

            // Update connectors
            PortId oldInPort0 = new PortId(converterNodeId, 0, PortType.INPUT);
            PortId newInPortAcos = new PortId(acosNodeId, 0, PortType.INPUT);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);

            data.ReconnectToPort(connector0, newInPortAcos);
            data.CreateConnector(acosNode, 0, converterNode, 0);

            return migrationData;
        }

开发者ID:TheChosen0ne，项目名称:Dynamo，代码行数:30，代码来源:dynBaseTypes.cs

示例2: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migrationData = new NodeMigrationData(data.Document);

            // Create DSFunction node
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            var newNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(newNode, "ProtoGeometry.dll",
                "Geometry.Transform", "[email protected],CoordinateSystem");
            migrationData.AppendNode(newNode);
            string newNodeId = MigrationManager.GetGuidFromXmlElement(newNode);

            // Create new node
            XmlElement identityCoordinateSystem = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 0, "ProtoGeometry.dll",
                "CoordinateSystem.Identity",
                "CoordinateSystem.Identity");
            migrationData.AppendNode(identityCoordinateSystem);

            // Update connectors
            PortId oldInPort1 = new PortId(newNodeId, 1, PortType.INPUT);
            PortId newInPort2 = new PortId(newNodeId, 2, PortType.INPUT);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);
            
            data.ReconnectToPort(connector1, newInPort2);
            data.CreateConnector(identityCoordinateSystem, 0, newNode, 1);

            return migrationData;
        }

开发者ID:RobertiF，项目名称:Dynamo，代码行数:29，代码来源:Curve.cs

示例3: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migrationData = new NodeMigrationData(data.Document);

            // Create DSFunction node
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            var newNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(newNode, "ProtoGeometry.dll",
                "Line.ByStartPointDirectionLength",
                "[email protected],Vector,double");
            migrationData.AppendNode(newNode);
            string newNodeId = MigrationManager.GetGuidFromXmlElement(newNode);

            //append asVector Node
            XmlElement pointAsVector0 = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 1, "ProtoGeometry.dll",
                "Point.AsVector", "Point.AsVector");
            migrationData.AppendNode(pointAsVector0);
            string pointAsVector0Id = MigrationManager.GetGuidFromXmlElement(pointAsVector0);

            PortId pToV0 = new PortId(pointAsVector0Id, 0, PortType.INPUT);
            PortId oldInPort1 = new PortId(newNodeId, 1, PortType.INPUT);

            XmlElement connector1 = data.FindFirstConnector(oldInPort1);
            data.ReconnectToPort(connector1, pToV0);
            data.CreateConnector(pointAsVector0, 0, newNode, 1); 

            return migrationData;
        }

开发者ID:RobertiF，项目名称:Dynamo，代码行数:31，代码来源:Line.cs

示例4: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migrationData = new NodeMigrationData(data.Document);

            // Create DSFunction node
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            var newNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(newNode, "ProtoGeometry.dll",
                "PolySurface.LocateSurfacesByLine", "[email protected]");
            migrationData.AppendNode(newNode);
            string newNodeId = MigrationManager.GetGuidFromXmlElement(newNode);

            // Create new nodes
            XmlElement polySurface = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 0, "ProtoGeometry.dll",
                "PolySurface.BySolid", "[email protected]");
            migrationData.AppendNode(polySurface);
            string polySurfaceId = MigrationManager.GetGuidFromXmlElement(polySurface);

            // Update connectors
            PortId oldInPort0 = new PortId(newNodeId, 0, PortType.INPUT);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);
            PortId polySurfaceInPort0 = new PortId(polySurfaceId, 0, PortType.INPUT);

            data.ReconnectToPort(connector0, polySurfaceInPort0);
            data.CreateConnector(polySurface, 0, newNode, 0);

            return migrationData;
        }

开发者ID:algobasket，项目名称:Dynamo，代码行数:29，代码来源:Face.cs

示例5: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migratedData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            //create the node itself
            XmlElement newNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(newNode, "ProtoGeometry.dll",
                "Surface.ByLoft",
                "[email protected][]");

            migratedData.AppendNode(newNode);
            string newNodeId = MigrationManager.GetGuidFromXmlElement(newNode);


            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.INPUT);
            data.RemoveFirstConnector(oldInPort0);

            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.INPUT);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);
            PortId newInPort0 = new PortId(newNodeId, 0, PortType.INPUT);
            data.ReconnectToPort(connector1, newInPort0);

            PortId oldInPort2 = new PortId(oldNodeId, 2, PortType.INPUT);
            data.RemoveFirstConnector(oldInPort2);

            return migratedData;
        }

开发者ID:RobertiF，项目名称:Dynamo，代码行数:29，代码来源:Solid.cs

示例6: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migratedData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            //create the node itself
            XmlElement dsRevitNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
             MigrationManager.SetFunctionSignature(dsRevitNode, "RevitNodes.dll", 
                 "FamilyInstance.ByPointAndLevel", 
                 "[email protected],Point,Level");

            migratedData.AppendNode(dsRevitNode);
            string dsRevitNodeId = MigrationManager.GetGuidFromXmlElement(dsRevitNode);

            //create and reconnect the connecters
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.INPUT);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);

            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.INPUT);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);

            PortId oldInPort2 = new PortId(oldNodeId, 2, PortType.INPUT);
            XmlElement connector2 = data.FindFirstConnector(oldInPort2);

            PortId newInPort0 = new PortId(dsRevitNodeId, 0, PortType.INPUT);
            PortId newInPort1 = new PortId(dsRevitNodeId, 1, PortType.INPUT);
            PortId newInPort2 = new PortId(dsRevitNodeId, 2, PortType.INPUT);

            data.ReconnectToPort(connector0, newInPort1);
            data.ReconnectToPort(connector1, newInPort0);
            data.ReconnectToPort(connector2, newInPort2);

            return migratedData;
        }

开发者ID:algobasket，项目名称:Dynamo，代码行数:35，代码来源:FamilyInstance.cs

示例7: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migratedData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            XmlElement dsRevitNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(dsRevitNode, "RevitNodes.dll",
                "Solid.ByBlend", "[email protected][][]");
            migratedData.AppendNode(dsRevitNode);
            string dsRevitNodeId = MigrationManager.GetGuidFromXmlElement(dsRevitNode);

            XmlElement createListNode = MigrationManager.CreateNode(data.Document,
                "DSCoreNodesUI.CreateList", "Create List");
            migratedData.AppendNode(createListNode);
            createListNode.SetAttribute("inputcount", "2");
            string createListNodeId = MigrationManager.GetGuidFromXmlElement(createListNode);

            //create and reconnect the connecters
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.INPUT);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);

            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.INPUT);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);

            PortId newInPort0 = new PortId(createListNodeId, 0, PortType.INPUT);
            PortId newInPort1 = new PortId(createListNodeId, 1, PortType.INPUT);

            data.ReconnectToPort(connector0, newInPort0);
            data.ReconnectToPort(connector1, newInPort1);
            data.CreateConnector(createListNode, 0, dsRevitNode, 0);

            return migratedData;
        }

开发者ID:TheChosen0ne，项目名称:Dynamo，代码行数:34，代码来源:Solid.cs

示例8: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migrationData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            // Create nodes
            XmlElement referencePoint = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(referencePoint,
                "RevitNodes.dll", "ReferencePoint.ByPoint",
                "[email protected]");
            migrationData.AppendNode(referencePoint);
            string referencePointId = MigrationManager.GetGuidFromXmlElement(referencePoint);

            XmlElement pointAtParameter = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 0, "RevitNodes.dll",
                "Face.PointAtParameter", "[email protected],double");
            migrationData.AppendNode(pointAtParameter);
            string pointAtParameterId = MigrationManager.GetGuidFromXmlElement(pointAtParameter);

            XmlElement uvU = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 1, "ProtoGeometry.dll", "UV.U", "UV.U");
            migrationData.AppendNode(uvU);
            string uvUId = MigrationManager.GetGuidFromXmlElement(uvU);

            XmlElement uvV = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 2, "ProtoGeometry.dll", "UV.V", "UV.V");
            migrationData.AppendNode(uvV);
            string uvVId = MigrationManager.GetGuidFromXmlElement(uvV);

            // Update connectors
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.INPUT);
            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.INPUT);
            PortId papInPort0 = new PortId(pointAtParameterId, 0, PortType.INPUT);
            PortId uvUInPort0 = new PortId(uvUId, 0, PortType.INPUT);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);
            XmlElement connectorUv = null;
            
            if (connector1 != null)
            {
                connectorUv = MigrationManager.CreateFunctionNodeFrom(connector1);
                data.CreateConnector(connectorUv);
            }

            if (connectorUv != null)
            {
                PortId uvVInPort0 = new PortId(uvVId, 0, PortType.INPUT);
                data.ReconnectToPort(connectorUv, uvVInPort0);
            }

            data.ReconnectToPort(connector0, papInPort0);
            data.ReconnectToPort(connector1, uvUInPort0);
            data.CreateConnector(uvU, 0, pointAtParameter, 1);
            data.CreateConnector(uvV, 0, pointAtParameter, 2);
            data.CreateConnector(pointAtParameter, 0, referencePoint, 0);

            return migrationData;
        }

开发者ID:algobasket，项目名称:Dynamo，代码行数:59，代码来源:ReferencePoint.cs

示例9: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            // This migration assumes that the first input of the old node is
            // always an XYZ and never a Transform.

            NodeMigrationData migrationData = new NodeMigrationData(data.Document);

            // Create DSFunction node
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            var newNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(newNode, "ProtoGeometry.dll",
                "Arc.ByCenterPointRadiusAngle", "[email protected],double,double,double,Vector");
            migrationData.AppendNode(newNode);
            string newNodeId = MigrationManager.GetGuidFromXmlElement(newNode);

            // Create new nodes
            XmlElement zAxisNode = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 0, "ProtoGeometry.dll", "Vector.ZAxis", "Vector.ZAxis");
            migrationData.AppendNode(zAxisNode);
            string zAxisNodeId = MigrationManager.GetGuidFromXmlElement(zAxisNode);

            XmlElement toDegreeNodeStart = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 1, "DSCoreNodes.dll", 
                "Math.RadiansToDegrees", "[email protected]");
            migrationData.AppendNode(toDegreeNodeStart);
            string toDegreeNodeStartId = MigrationManager.GetGuidFromXmlElement(toDegreeNodeStart);

            XmlElement toDegreeNodeEnd = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 2, "DSCoreNodes.dll",
                "Math.RadiansToDegrees", "[email protected]");
            migrationData.AppendNode(toDegreeNodeEnd);
            string toDegreeNodeEndId = MigrationManager.GetGuidFromXmlElement(toDegreeNodeEnd);

            PortId oldInPort2 = new PortId(oldNodeId, 2, PortType.INPUT);
            XmlElement connector2 = data.FindFirstConnector(oldInPort2);

            PortId oldInPort3 = new PortId(oldNodeId, 3, PortType.INPUT);
            XmlElement connector3 = data.FindFirstConnector(oldInPort3);

            PortId toDegreeNodeStartPort = new PortId(toDegreeNodeStartId, 0, PortType.INPUT);
            PortId toDegreeNodeEndPort = new PortId(toDegreeNodeEndId, 0, PortType.INPUT);

            // Update connectors
            data.ReconnectToPort(connector2, toDegreeNodeStartPort);
            data.ReconnectToPort(connector3, toDegreeNodeEndPort);
            data.CreateConnector(toDegreeNodeStart, 0, newNode, 2);
            data.CreateConnector(toDegreeNodeEnd, 0, newNode, 3);
            data.CreateConnector(zAxisNode, 0, newNode, 4);

            return migrationData;
        }

开发者ID:RobertiF，项目名称:Dynamo，代码行数:53，代码来源:Arc.cs

示例10: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migratedData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            //create the node itself
            XmlElement dsRevitNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(dsRevitNode, "RevitNodes.dll",
                "FaceAnalysisDisplay.ByViewFacePointsAndValues",
                "[email protected],FaceReference,double[][],double[]");

            migratedData.AppendNode(dsRevitNode);
            string dsRevitNodeId = MigrationManager.GetGuidFromXmlElement(dsRevitNode);

            XmlElement documentNode = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 0, "RevitNodes.dll",
                "Document.Current", "Document.Current");
            migratedData.AppendNode(documentNode);

            XmlElement activeViewNode = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 1, "RevitNodes.dll",
                "Document.ActiveView", "Document.ActiveView");
            migratedData.AppendNode(activeViewNode);

            //create and reconnect the connecters
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.Input);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);

            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.Input);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);

            PortId oldInPort2 = new PortId(oldNodeId, 2, PortType.Input);
            
            PortId oldInPort3 = new PortId(oldNodeId, 3, PortType.Input);
            XmlElement connector3 = data.FindFirstConnector(oldInPort3);

            PortId newInPort1 = new PortId(dsRevitNodeId, 1, PortType.Input);
            PortId newInPort2 = new PortId(dsRevitNodeId, 2, PortType.Input);
            PortId newInPort3 = new PortId(dsRevitNodeId, 3, PortType.Input);

            data.ReconnectToPort(connector0, newInPort3);
            data.ReconnectToPort(connector1, newInPort2);
            data.ReconnectToPort(connector3, newInPort1);

            data.RemoveFirstConnector(oldInPort2);
            data.CreateConnector(documentNode, 0, activeViewNode, 0);
            data.CreateConnector(activeViewNode, 0, dsRevitNode, 0);

            return migratedData;
        }

开发者ID:rafatahmed，项目名称:Dynamo，代码行数:51，代码来源:AnalysisDisplay.cs

示例11: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migrationData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            // Create DSFunction node
            XmlElement newNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(newNode, "RevitNodes.dll",
                "StructuralFraming.ByCurveLevelUpVectorAndType",
                "[email protected],Level,Vector,StructuralType,FamilySymbol");
            migrationData.AppendNode(newNode);
            string newNodeId = MigrationManager.GetGuidFromXmlElement(newNode);

            // Create new nodes
            XmlElement one = MigrationManager.CreateCodeBlockNodeModelNode(
                data.Document, oldNode, 0, "1");
            migrationData.AppendNode(one);
            string oneId = MigrationManager.GetGuidFromXmlElement(one);

            XmlElement level = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 1, "RevitNodes.dll",
                "Level.ByElevation", "[email protected]");
            migrationData.AppendNode(level);
            string levelId = MigrationManager.GetGuidFromXmlElement(level);

            // Assume that structural framing created by 0.6.3 is always Beam
            XmlElement beam = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 2, "RevitNodes.dll",
                "StructuralType.Beam", "StructuralType.Beam");
            migrationData.AppendNode(beam);
            string beamId = MigrationManager.GetGuidFromXmlElement(beam);

            // Update connectors
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.Input);
            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.Input);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);
            PortId newInPort0 = new PortId(newNodeId, 0, PortType.Input);
            PortId newInPort4 = new PortId(newNodeId, 4, PortType.Input);

            data.CreateConnector(one, 0, level, 0);
            data.CreateConnector(level, 0, newNode, 1);
            data.CreateConnector(beam, 0, newNode, 3);
            data.ReconnectToPort(connector0, newInPort4);
            data.ReconnectToPort(connector1, newInPort0);

            return migrationData;
        }

开发者ID:rafatahmed，项目名称:Dynamo，代码行数:49，代码来源:StructuralFraming.cs

示例12: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migratedData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            //create the node itself
            XmlElement dsRevitNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(dsRevitNode, "RevitNodes.dll",
                "Form.ByLoftingCurveElements",
                "[email protected][],bool");

            migratedData.AppendNode(dsRevitNode);
            string dsRevitNodeId = MigrationManager.GetGuidFromXmlElement(dsRevitNode);

            //create and reconnect the connecters
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.INPUT);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);

            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.INPUT);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);

            PortId newInPort0 = new PortId(dsRevitNodeId, 0, PortType.INPUT);
            PortId newInPort1 = new PortId(dsRevitNodeId, 1, PortType.INPUT);

            data.ReconnectToPort(connector0, newInPort1);
            data.ReconnectToPort(connector1, newInPort0);

            // Add default values
            foreach (XmlNode child in oldNode.ChildNodes)
            {
                var newChild = child.Clone() as XmlElement;

                switch (newChild.GetAttribute("index"))
                {
                    case "0":
                        newChild.SetAttribute("index", "1");
                        dsRevitNode.AppendChild(newChild);
                        break;

                    default:
                        break;
                }
            }

            return migratedData;
        }

开发者ID:algobasket，项目名称:Dynamo，代码行数:47，代码来源:Solid.cs

示例13: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migrationData = new NodeMigrationData(data.Document);

            // Create DSFunction node
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            var newNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(newNode, "ProtoGeometry.dll",
                "Point.ByCylindricalCoordinates", "[email protected],double,double,double");
            migrationData.AppendNode(newNode);
            string newNodeId = MigrationManager.GetGuidFromXmlElement(newNode);

            // Create new node
            XmlElement identityCoordinateSystem = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 0, "ProtoGeometry.dll",
                "CoordinateSystem.Identity",
                "CoordinateSystem.Identity");
            migrationData.AppendNode(identityCoordinateSystem);

            XmlElement converterNode = MigrationManager.CreateFunctionNode(
                data.Document, oldNode, 1, "DSCoreNodes.dll",
                "Math.RadiansToDegrees", "[email protected]");
            migrationData.AppendNode(converterNode);
            string converterNodeId = MigrationManager.GetGuidFromXmlElement(converterNode);

            // Update connectors
            PortId oldInPort0 = new PortId(newNodeId, 0, PortType.INPUT);
            PortId oldInPort1 = new PortId(newNodeId, 1, PortType.INPUT);

            PortId newInPort3 = new PortId(newNodeId, 3, PortType.INPUT);
            PortId converterInPort = new PortId(converterNodeId, 0, PortType.INPUT);

            XmlElement connector0 = data.FindFirstConnector(oldInPort0);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);

            data.ReconnectToPort(connector0, newInPort3);
            data.ReconnectToPort(connector1, converterInPort);
            data.CreateConnector(converterNode, 0, newNode, 1);
            data.CreateConnector(identityCoordinateSystem, 0, newNode, 0);

            // Add default values
            foreach (XmlNode child in oldNode.ChildNodes)
                newNode.AppendChild(child.Clone());

            return migrationData;
        }

开发者ID:RobertiF，项目名称:Dynamo，代码行数:46，代码来源:XYZ.cs

示例14: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migrationData = new NodeMigrationData(data.Document);

            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            XmlElement codeBlockNode = MigrationManager.CreateCodeBlockNodeModelNode(
                data.Document, oldNode, 0,
                "domain[0][0]..domain[1][0]..#ucount+1;\n" +
                "domain[0][1]..domain[1][1]..#vcount+1;");
            migrationData.AppendNode(codeBlockNode);
            string codeBlockNodeId = MigrationManager.GetGuidFromXmlElement(codeBlockNode);

            XmlElement uvNode = MigrationManager.CreateFunctionNode(data.Document, oldNode, 1,
                "ProtoGeometry.dll", "UV.ByCoordinates", "[email protected],double");
            uvNode.SetAttribute("lacing", "CrossProduct");
            migrationData.AppendNode(uvNode);

            XmlElement flattenNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(flattenNode, "",
                "Flatten", "Flatten");
            flattenNode.SetAttribute("lacing", "Shortest");
            migrationData.AppendNode(flattenNode);

            // Update connectors
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.Input);
            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.Input);
            PortId oldInPort2 = new PortId(oldNodeId, 2, PortType.Input);
            PortId newInPort0 = new PortId(codeBlockNodeId, 0, PortType.Input);
            PortId newInPort1 = new PortId(codeBlockNodeId, 1, PortType.Input);
            PortId newInPort2 = new PortId(codeBlockNodeId, 2, PortType.Input);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);
            XmlElement connector2 = data.FindFirstConnector(oldInPort2);

            data.ReconnectToPort(connector0, newInPort0);
            data.ReconnectToPort(connector1, newInPort1);
            data.ReconnectToPort(connector2, newInPort2);

            data.CreateConnector(codeBlockNode, 0, uvNode, 0);
            data.CreateConnector(codeBlockNode, 1, uvNode, 1);
            data.CreateConnector(uvNode, 0, flattenNode, 0);

            return migrationData;
        }

开发者ID:rafatahmed，项目名称:Dynamo，代码行数:46，代码来源:UV.cs

示例15: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migratedData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            //create the node itself
            XmlElement dsRevitNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(dsRevitNode, "RevitNodes.dll", 
                "AxonometricView.ByEyePointAndTarget", 
                "[email protected],Point,var,string,bool");

            migratedData.AppendNode(dsRevitNode);
            string dsRevitNodeId = MigrationManager.GetGuidFromXmlElement(dsRevitNode);

            //create and reconnect the connecters
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.Input);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);

            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.Input);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);

            PortId oldInPort2 = new PortId(oldNodeId, 2, PortType.Input);
            XmlElement connector2 = data.FindFirstConnector(oldInPort2);

            PortId oldInPort3 = new PortId(oldNodeId, 3, PortType.Input);
            XmlElement connector3 = data.FindFirstConnector(oldInPort3);

            PortId oldInPort4 = new PortId(oldNodeId, 4, PortType.Input);
            XmlElement connector4 = data.FindFirstConnector(oldInPort4);

            PortId newInPort0 = new PortId(dsRevitNodeId, 0, PortType.Input);
            PortId newInPort1 = new PortId(dsRevitNodeId, 1, PortType.Input);
            PortId newInPort2 = new PortId(dsRevitNodeId, 2, PortType.Input);
            PortId newInPort3 = new PortId(dsRevitNodeId, 3, PortType.Input);
            PortId newInPort4 = new PortId(dsRevitNodeId, 4, PortType.Input);

            data.ReconnectToPort(connector0, newInPort0);
            data.ReconnectToPort(connector1, newInPort1);
            data.ReconnectToPort(connector2, newInPort3);
            data.ReconnectToPort(connector3, newInPort2);
            data.ReconnectToPort(connector4, newInPort4);

            return migratedData;
        }

开发者ID:rafatahmed，项目名称:Dynamo，代码行数:45，代码来源:View.cs

示例16: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migratedData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            //create the node itself
            XmlElement distanceToPoint = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(distanceToPoint, "ProtoGeometry.dll",
                "Geometry.DistanceTo",
                "[email protected]");
            migratedData.AppendNode(distanceToPoint);
            string distanceToPointId = MigrationManager.GetGuidFromXmlElement(distanceToPoint);

            XmlElement point1 = MigrationManager.CreateFunctionNode(
                data.Document, "ProtoGeometry.dll",
                "ReferencePoint.Point", "ReferencePoint.Point");
            migratedData.AppendNode(point1);
            string point1Id = MigrationManager.GetGuidFromXmlElement(point1);

            XmlElement point2 = MigrationManager.CreateFunctionNode(
                data.Document, "ProtoGeometry.dll",
                "ReferencePoint.Point", "ReferencePoint.Point");
            migratedData.AppendNode(point2);
            string point2Id = MigrationManager.GetGuidFromXmlElement(point2);

            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.INPUT);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);

            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.INPUT);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);

            PortId newInPort0 = new PortId(point1Id, 0, PortType.INPUT);
            PortId newInPort1 = new PortId(point2Id, 0, PortType.INPUT);
            data.ReconnectToPort(connector0, newInPort0);
            data.ReconnectToPort(connector1, newInPort1);

            data.CreateConnector(point1, 0, distanceToPoint, 0);
            data.CreateConnector(point2, 0, distanceToPoint, 1);

            return migratedData;
        }

开发者ID:TheChosen0ne，项目名称:Dynamo，代码行数:42，代码来源:ReferencePoint.cs

示例17: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migratedData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            //create the node itself
            XmlElement dsRevitNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(dsRevitNode, "RevitNodes.dll", 
                "Wall.ByCurveAndHeight", 
                "[email protected],double,Level,WallType");

            migratedData.AppendNode(dsRevitNode);
            string dsRevitNodeId = MigrationManager.GetGuidFromXmlElement(dsRevitNode);

            //create and reconnect the connecters
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.Input);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);

            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.Input);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);

            PortId oldInPort2 = new PortId(oldNodeId, 2, PortType.Input);
            XmlElement connector2 = data.FindFirstConnector(oldInPort2);

            PortId oldInPort3 = new PortId(oldNodeId, 3, PortType.Input);
            XmlElement connector3 = data.FindFirstConnector(oldInPort3);

            PortId newInPort0 = new PortId(dsRevitNodeId, 0, PortType.Input);
            PortId newInPort1 = new PortId(dsRevitNodeId, 1, PortType.Input);
            PortId newInPort2 = new PortId(dsRevitNodeId, 2, PortType.Input);
            PortId newInPort3 = new PortId(dsRevitNodeId, 3, PortType.Input);

            data.ReconnectToPort(connector0, newInPort0);
            data.ReconnectToPort(connector1, newInPort2);
            data.ReconnectToPort(connector2, newInPort3);
            data.ReconnectToPort(connector3, newInPort1);

            return migratedData;
        }

开发者ID:rafatahmed，项目名称:Dynamo，代码行数:40，代码来源:Wall.cs

示例18: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migrationData = new NodeMigrationData(data.Document);

            // Create DSFunction node
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            var newNode = MigrationManager.CreateFunctionNodeFrom(oldNode);
            MigrationManager.SetFunctionSignature(newNode, "ProtoGeometry.dll",
                "Plane.ByOriginNormal", "[email protected],Vector");
            migrationData.AppendNode(newNode);
            string newNodeId = MigrationManager.GetGuidFromXmlElement(newNode);

            // Update connectors
            PortId oldInPort0 = new PortId(newNodeId, 0, PortType.INPUT);
            PortId oldInPort1 = new PortId(newNodeId, 1, PortType.INPUT);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);
            data.ReconnectToPort(connector0, oldInPort1);
            data.ReconnectToPort(connector1, oldInPort0);

            return migrationData;
        }

开发者ID:TheChosen0ne，项目名称:Dynamo，代码行数:22，代码来源:Plane.cs

示例19: Migrate_0630_to_0700

        public static NodeMigrationData Migrate_0630_to_0700(NodeMigrationData data)
        {
            NodeMigrationData migratedData = new NodeMigrationData(data.Document);
            XmlElement oldNode = data.MigratedNodes.ElementAt(0);
            string oldNodeId = MigrationManager.GetGuidFromXmlElement(oldNode);

            //create the node itself
            XmlElement dsRevitNode = MigrationManager.CreateFunctionNode(
                data.Document, "RevitNodes.dll",
                "StructuralFraming.ByCurveLevelUpVectorAndType",
                "[email protected],Level,Vector,StructuralType,FamilySymbol");

            migratedData.AppendNode(dsRevitNode);
            string dsRevitNodeId = MigrationManager.GetGuidFromXmlElement(dsRevitNode);

            //create and reconnect the connecters
            PortId oldInPort0 = new PortId(oldNodeId, 0, PortType.INPUT);
            XmlElement connector0 = data.FindFirstConnector(oldInPort0);

            PortId oldInPort1 = new PortId(oldNodeId, 1, PortType.INPUT);
            XmlElement connector1 = data.FindFirstConnector(oldInPort1);

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C# Models.WorkspaceModel类代码示例发布时间：2022-05-24

C# Models.NodeModel类代码示例发布时间：2022-05-24

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19127|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9971|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8626|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8640|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C# Models.PortId类代码示例

示例1: Migrate_0630_to_0700

示例2: Migrate_0630_to_0700

示例3: Migrate_0630_to_0700

示例4: Migrate_0630_to_0700

示例5: Migrate_0630_to_0700

示例6: Migrate_0630_to_0700

示例7: Migrate_0630_to_0700

示例8: Migrate_0630_to_0700

示例9: Migrate_0630_to_0700

示例10: Migrate_0630_to_0700

示例11: Migrate_0630_to_0700

示例12: Migrate_0630_to_0700

示例13: Migrate_0630_to_0700

示例14: Migrate_0630_to_0700

示例15: Migrate_0630_to_0700

示例16: Migrate_0630_to_0700

示例17: Migrate_0630_to_0700

示例18: Migrate_0630_to_0700

示例19: Migrate_0630_to_0700

请发表评论

全部评论

上一篇：

下一篇：

5. matlab入门——图形标注、特殊绘图、三

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053