C# DynamoModel.UndoRedoCommand类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› c#›C#教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C#中Dynamo.Models.DynamoModel.UndoRedoCommand类的典型用法代码示例。如果您正苦于以下问题：C# DynamoModel.UndoRedoCommand类的具体用法？C# DynamoModel.UndoRedoCommand怎么用？C# DynamoModel.UndoRedoCommand使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

DynamoModel.UndoRedoCommand类属于Dynamo.Models命名空间，在下文中一共展示了DynamoModel.UndoRedoCommand类的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C#代码示例。

示例1: Redo

 private void Redo(object parameter)
 {
     var command = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Redo);
     this.ExecuteCommand(command);
 }

开发者ID:norbertzsiros，项目名称:Dynamo，代码行数:5，代码来源:DynamoViewModel.cs

示例2: TestNodeToCodeUndoBase

        private void TestNodeToCodeUndoBase(string filePath)
        {
            // Verify after undo all nodes and connectors should be resotored back
            // to original state.
            OpenModel(filePath);

            var wp = CurrentDynamoModel.CurrentWorkspace;
            var nodeGuids = wp.Nodes.Select(n => n.GUID).ToList();
            nodeGuids.Sort();

            var connectorGuids = wp.Connectors.Select(c => c.GUID).ToList();
            connectorGuids.Sort();

            SelectAll(wp.Nodes);
            var command = new DynamoModel.ConvertNodesToCodeCommand();
            CurrentDynamoModel.ExecuteCommand(command);

            var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
            CurrentDynamoModel.ExecuteCommand(undo);

            var curNodeGuids = wp.Nodes.Select(n => n.GUID).ToList();
            curNodeGuids.Sort();

            var curConnectorGuids = wp.Connectors.Select(c => c.GUID).ToList();
            curConnectorGuids.Sort();

            Assert.AreEqual(curNodeGuids.Count, nodeGuids.Count);
            Assert.IsTrue(nodeGuids.SequenceEqual(curNodeGuids));

            Assert.AreEqual(curConnectorGuids.Count, connectorGuids.Count);
            Assert.IsTrue(connectorGuids.SequenceEqual(curConnectorGuids));
        }

开发者ID:Conceptual-Design，项目名称:Dynamo，代码行数:32，代码来源:NodeToCodeTest.cs

示例3: RunTest

        public override bool RunTest(NodeModel node, EngineController engine, StreamWriter writer)
        {
            bool pass = false;

            var valueMap = new Dictionary<Guid, String>();
            if (node.OutPorts.Count > 0)
            {
                var firstNodeConnectors = node.AllConnectors.ToList(); //Get node connectors
                foreach (ConnectorModel connector in firstNodeConnectors)
                {
                    Guid guid = connector.Start.Owner.GUID;
                    if (!valueMap.ContainsKey(guid))
                    {
                        Object data = connector.Start.Owner.GetValue(0, engine).Data;
                        String val = data != null ? data.ToString() : "null";
                        valueMap.Add(guid, val);
                        writer.WriteLine(guid + " :: " + val);
                        writer.Flush();
                    }
                }
            }

            int numberOfUndosNeeded = Mutate(node);
            Thread.Sleep(100);

            writer.WriteLine("### - Beginning undo");
            for (int iUndo = 0; iUndo < numberOfUndosNeeded; iUndo++)
            {
                DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                {
                    DynamoModel.UndoRedoCommand undoCommand =
                        new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);

                    DynamoViewModel.ExecuteCommand(undoCommand);
                }));
                Thread.Sleep(100);
            }
            writer.WriteLine("### - undo complete");
            writer.Flush();

            DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
            {
                DynamoModel.RunCancelCommand runCancel =
                    new DynamoModel.RunCancelCommand(false, false);

                DynamoViewModel.ExecuteCommand(runCancel);
            }));
            while (!DynamoViewModel.HomeSpace.RunSettings.RunEnabled)
            {
                Thread.Sleep(10);
            }

            writer.WriteLine("### - Beginning test of NumberSequence");
            if (node.OutPorts.Count > 0)
            {
                try
                {
                    var firstNodeConnectors = node.AllConnectors.ToList();
                    foreach (ConnectorModel connector in firstNodeConnectors)
                    {
                        String valmap = valueMap[connector.Start.Owner.GUID].ToString();
                        Object data = connector.Start.Owner.GetValue(0, engine).Data;
                        String nodeVal = data != null ? data.ToString() : "null";

                        if (valmap != nodeVal)
                        {
                            writer.WriteLine("!!!!!!!!!!! - test of NumberSequence is failed");
                            writer.WriteLine(node.GUID);

                            writer.WriteLine("Was: " + nodeVal);
                            writer.WriteLine("Should have been: " + valmap);
                            writer.Flush();
                            return pass;
                        }
                    }
                }
                catch (Exception)
                {
                    writer.WriteLine("!!!!!!!!!!! - test of NumberSequence is failed");
                    writer.Flush();
                    return pass;
                }
            }
            writer.WriteLine("### - test of NumberSequence complete");
            writer.Flush();

            return pass = true;
        }

开发者ID:JinWooShin，项目名称:Dynamo，代码行数:88，代码来源:NumberSequenceMutator.cs

示例4: TestBasicNode2CodeWorkFlow2

        public void TestBasicNode2CodeWorkFlow2()
        {
            // 1 -> Point.ByCoordinates ---+
            //                             |---------------------------+ 
            //                             +-- List.Create (index0)    |-> Line.ByStartPointEndPoint
            //                             +--> List.Create (index1)   |
            //                             |---------------------------+ 
            // 2 -> Point.ByCoordinates ---+
            OpenModel(@"core\node2code\workflow2.dyn");
            var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes;

            SelectAll(nodes);
            var command = new DynamoModel.ConvertNodesToCodeCommand();
            CurrentDynamoModel.ExecuteCommand(command);

            Assert.AreEqual(0, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
            Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());

            var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
            CurrentDynamoModel.ExecuteCommand(undo);

            Assert.AreEqual(6, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
            Assert.AreEqual(6, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
        }

开发者ID:Conceptual-Design，项目名称:Dynamo，代码行数:24，代码来源:NodeToCodeTest.cs

示例5: TestBasicNode2CodeWorkFlow4

        public void TestBasicNode2CodeWorkFlow4()
        {
            OpenModel(@"core\node2code\workflow4.dyn");
            var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes;

            SelectAll(nodes);
            var command = new DynamoModel.ConvertNodesToCodeCommand();
            CurrentDynamoModel.ExecuteCommand(command);

            Assert.AreEqual(3, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
            Assert.AreEqual(3, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());

            var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
            CurrentDynamoModel.ExecuteCommand(undo);

            Assert.AreEqual(4, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
            Assert.AreEqual(4, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
        }

开发者ID:Conceptual-Design，项目名称:Dynamo，代码行数:18，代码来源:NodeToCodeTest.cs

示例6: MutationTest

        /// <summary>
        /// Run the dyn file and get all preview values in string representation. 
        /// Then, iterate all nodes, for each iteration, choose a node and convert 
        /// the remaining nodes to code, and compare the preview value of this 
        /// node against with its original value; then undo, run and compare the
        /// preview values of all nodes with original values.
        /// </summary>
        /// <param name="dynFilePath"></param>
        protected void MutationTest(string dynFilePath)
        {
            CurrentDynamoModel.Scheduler.ProcessMode = TaskProcessMode.Asynchronous;

            RunModel(dynFilePath);
            // Block until all tasks are executed
            while (CurrentDynamoModel.Scheduler.HasPendingTasks);

            var allNodes = CurrentDynamoModel.CurrentWorkspace.Nodes.Select(n => n.GUID).ToList();
            int nodeCount = allNodes.Count();
            var previewMap = allNodes.ToDictionary(n => n, n => GetStringData(n));

            var convertibleNodes = CurrentDynamoModel.CurrentWorkspace.Nodes
                                                                      .Where(node => node.IsConvertible)
                                                                      .Select(n => n.GUID).ToList();
            int connectorCount = CurrentDynamoModel.CurrentWorkspace.Connectors.Count();

            for (int i = 1; i <= Math.Min(convertibleNodes.Count(), 10); ++i)
            {
                var toBeConvertedNodes = convertibleNodes.Take(i);
                var otherNodes = allNodes.Except(toBeConvertedNodes);

                SelectAll(toBeConvertedNodes);

                var command = new DynamoModel.ConvertNodesToCodeCommand();
                CurrentDynamoModel.ExecuteCommand(command);
                // Block until all tasks are executed
                while (CurrentDynamoModel.Scheduler.HasPendingTasks);

                foreach (var node in otherNodes)
                {
                    // Verify after converting remaining nodes to code, the value
                    // of node that is not converted should remain same.
                    var preValue = previewMap[node];
                    var currentValue = GetStringData(node);
                    Assert.AreEqual(preValue, currentValue);
                }

                var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
                CurrentDynamoModel.ExecuteCommand(undo);
                // Block until all tasks are executed
                while (CurrentDynamoModel.Scheduler.HasPendingTasks) ;

                // Verify after undo everything is OK
                Assert.AreEqual(nodeCount, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
                Assert.AreEqual(connectorCount, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());

                foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
                {
                    Assert.IsTrue(previewMap.ContainsKey(node.GUID));
                    var preValue = previewMap[node.GUID];
                    var currentValue = GetStringData(node.GUID);
                    Assert.AreEqual(preValue, currentValue);
                }
            }
        }

开发者ID:Conceptual-Design，项目名称:Dynamo，代码行数:64，代码来源:NodeToCodeTest.cs

示例7: TestBasicNode2CodeWorkFlow1

        public void TestBasicNode2CodeWorkFlow1()
        {
            // 1 -> a -> x
            OpenModel(@"core\node2code\workflow1.dyn");
            var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes;
            var engine = CurrentDynamoModel.EngineController;

            var result = engine.ConvertNodesToCode(nodes, nodes);
            result = NodeToCodeCompiler.ConstantPropagationForTemp(result, Enumerable.Empty<string>());
            Assert.IsNotNull(result);
            Assert.IsNotNull(result.AstNodes);

            var expr1 = result.AstNodes.First() as BinaryExpressionNode;
            var expr2 = result.AstNodes.Last() as BinaryExpressionNode;

            Assert.IsNotNull(expr1);
            Assert.IsNotNull(expr2);

            Assert.IsTrue(expr1.ToString().StartsWith("a = 1;"));
            Assert.IsTrue(expr2.ToString().StartsWith("x = a;"));

            var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
            CurrentDynamoModel.ExecuteCommand(undo);

            Assert.AreEqual(2, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
            Assert.AreEqual(3, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
        }

开发者ID:Conceptual-Design，项目名称:Dynamo，代码行数:27，代码来源:NodeToCodeTest.cs

示例8: UndoTest

        /// <summary>
        /// Run the dyn file and get all preview values in string representation.
        /// Undo, force run and get all preview values in string representation.
        /// These two sets of preview value should be the same.
        /// </summary>
        /// <param name="dynFilePath"></param>
        protected void UndoTest(string dynFilePath)
        {
            Dictionary<Guid, string> previewMap = new Dictionary<Guid, string>();
            RunModel(dynFilePath);

            foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
            {
                previewMap[node.GUID] = GetStringData(node.GUID); 
            }

            int nodeCount = CurrentDynamoModel.CurrentWorkspace.Nodes.Count();
            int connectorCount = CurrentDynamoModel.CurrentWorkspace.Connectors.Count();

            SelectAll();
            var command = new DynamoModel.ConvertNodesToCodeCommand();
            CurrentDynamoModel.ExecuteCommand(command);
            CurrentDynamoModel.ForceRun();

            var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
            CurrentDynamoModel.ExecuteCommand(undo);
            CurrentDynamoModel.ForceRun();

            // Verify after undo everything is OK
            Assert.AreEqual(nodeCount, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
            Assert.AreEqual(connectorCount, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());

            foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
            {
                Assert.IsTrue(previewMap.ContainsKey(node.GUID));
                var preValue = previewMap[node.GUID];
                var currentValue = GetStringData(node.GUID);
                Assert.AreEqual(preValue, currentValue);
            }
        }

开发者ID:dspeckhard，项目名称:Dynamo，代码行数:40，代码来源:NodeToCodeTest.cs

示例9: MutationTest

        /// <summary>
        /// Run the dyn file and get all preview values in string representation. 
        /// Then, iterate all nodes, for each iteration, choose a node and convert 
        /// the remaining nodes to code, and compare the preview value of this 
        /// node against with its original value.
        /// </summary>
        /// <param name="dynFilePath"></param>
        protected void MutationTest(string dynFilePath)
        {
            Dictionary<Guid, string> previewMap = new Dictionary<Guid, string>();
            RunModel(dynFilePath);

            foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
            {
                previewMap[node.GUID] = GetStringData(node.GUID);
            }

            var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes.Select(n => n.GUID).ToList();
            foreach (var node in nodes)
            {
                SelectAllExcept(node);
                var command = new DynamoModel.ConvertNodesToCodeCommand();
                CurrentDynamoModel.ExecuteCommand(command);
                CurrentDynamoModel.ForceRun();

                var preValue = previewMap[node];
                var currentValue = GetStringData(node);
                Assert.AreEqual(preValue, currentValue);
 
                var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
                CurrentDynamoModel.ExecuteCommand(undo);
            }
        }

开发者ID:dspeckhard，项目名称:Dynamo，代码行数:33，代码来源:NodeToCodeTest.cs

示例10: RunTest

        public override bool RunTest(NodeModel node, EngineController engine, StreamWriter writer)
        {
            bool pass = false;

            List<ConnectorModel> firstNodeConnectors = node.AllConnectors.ToList();

            Dictionary<Guid, String> valueMap = new Dictionary<Guid, String>();

            foreach (ConnectorModel connector in firstNodeConnectors)
            {
                if (connector.Start.Owner.GUID != node.GUID)
                {
                    Guid guid = connector.Start.Owner.GUID;
                    if (!valueMap.ContainsKey(guid))
                    {
                        String val = connector.Start.Owner.NickName;
                        valueMap.Add(guid, val);
                        writer.WriteLine(guid + " :: " + val);
                        writer.Flush();
                    }
                }
                else if (connector.End.Owner.GUID != node.GUID)
                {
                    Guid guid = connector.End.Owner.GUID;
                    if (!valueMap.ContainsKey(guid))
                    {
                        String val = connector.End.Owner.NickName;
                        valueMap.Add(guid, val);
                        writer.WriteLine(guid + " :: " + val);
                        writer.Flush();
                    }
                }
            }

            int numberOfUndosNeeded = Mutate(node);

            Thread.Sleep(0);

            IEnumerable<NodeModel> nodesAfterMutate = DynamoViewModel.Model.CurrentWorkspace.Nodes;

            if (nodesAfterMutate.Contains(node))
            {
                writer.WriteLine("### - Connector wasn't deleted");
                writer.Flush();
                return pass;
            }
            else
                writer.WriteLine("### - Connector was deleted");

            for (int iUndo = 0; iUndo < numberOfUndosNeeded; iUndo++)
            {
                DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                {
                    DynamoModel.UndoRedoCommand undoCommand =
                        new DynamoModel.UndoRedoCommand(
                            DynamoModel.UndoRedoCommand.Operation.Undo);

                    DynamoViewModel.ExecuteCommand(undoCommand);
                }));
            }
            Thread.Sleep(0);

            IEnumerable<NodeModel> nodesAfterUndo = DynamoViewModel.Model.CurrentWorkspace.Nodes;

            NodeModel nodeAfterUndo = nodesAfterUndo.FirstOrDefault(t => t.GUID.Equals(node.GUID));

            List<ConnectorModel> firstNodeConnectorsAfterUndo = nodeAfterUndo.AllConnectors.ToList();

            foreach (ConnectorModel connector in firstNodeConnectorsAfterUndo)
            {
                if (connector.Start.Owner.GUID != node.GUID)
                {
                    Guid guid = connector.Start.Owner.GUID;

                    if (!valueMap.ContainsKey(guid))
                    {
                        writer.WriteLine("### - ### - Connector wasn't recreated");
                        writer.Flush();
                        return pass;
                    }
                    else
                    {
                        writer.WriteLine("### - Connector was recreated");
                        writer.Flush();
                    }
                }
                else if (connector.End.Owner.GUID != node.GUID)
                {
                    Guid guid = connector.End.Owner.GUID;

                    if (!valueMap.ContainsKey(guid))
                    {
                        writer.WriteLine("### - ### - Connector wasn't recreated");
                        writer.Flush();
                        return pass;
                    }
                    else
                    {
                        writer.WriteLine("### - Connector was recreated");
                        writer.Flush();
//.........这里部分代码省略.........

开发者ID:rafatahmed，项目名称:Dynamo，代码行数:101，代码来源:ConnectorMutator.cs

示例11: RunTest

        public override bool RunTest(NodeModel node, EngineController engine, StreamWriter writer)
        {
            bool pass = false;

            var valueMap = new Dictionary<Guid, String>();
            if (node.OutPorts.Count > 0)
            {
                Guid guid = node.GUID;
                Object data = node.GetValue(0, engine).Data;
                String val = data != null ? data.ToString() : "null";
                valueMap.Add(guid, val);
                writer.WriteLine(guid + " :: " + val);
                writer.Flush();
            }

            int numberOfUndosNeeded = Mutate(node);
            Thread.Sleep(100);

            writer.WriteLine("### - Beginning undo");
            for (int iUndo = 0; iUndo < numberOfUndosNeeded; iUndo++)
            {
                DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                {
                    DynamoModel.UndoRedoCommand undoCommand =
                        new DynamoModel.UndoRedoCommand(
                            DynamoModel.UndoRedoCommand.Operation.Undo);

                    DynamoViewModel.ExecuteCommand(undoCommand);
                }));
            }
            Thread.Sleep(100);

            writer.WriteLine("### - undo complete");
            writer.Flush();
            writer.WriteLine("### - Beginning re-exec");

            DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
            {
                DynamoModel.RunCancelCommand runCancel =
                    new DynamoModel.RunCancelCommand(false, false);

                DynamoViewModel.ExecuteCommand(runCancel);
            }));
            Thread.Sleep(10);
            while (!DynamoViewModel.HomeSpace.RunSettings.RunEnabled)
            {
                Thread.Sleep(10);
            }
            writer.WriteLine("### - re-exec complete");
            writer.Flush();

            writer.WriteLine("### - Beginning readback");

            writer.WriteLine("### - Beginning test of DirectoryPath");

            if (node.OutPorts.Count > 0)
            {
                try
                {
                    string valmap = valueMap[node.GUID].ToString();
                    object data = node.GetValue(0, engine).Data;
                    string nodeVal = data != null ? data.ToString() : "null";

                    if (valmap != nodeVal)
                    {
                        writer.WriteLine("!!!!!!!!!!! - test of DirectoryPath is failed");
                        writer.WriteLine(node.GUID);

                        writer.WriteLine("Was: " + nodeVal);
                        writer.WriteLine("Should have been: " + valmap);
                        writer.Flush();
                        return pass;
                    }
                }
                catch (Exception)
                {
                    writer.WriteLine("!!!!!!!!!!! - test of DirectoryPath is failed");
                    writer.Flush();
                    return pass;
                }
            }
            writer.WriteLine("### - test of DirectoryPath complete");
            writer.Flush();

            return pass = true;
        }

开发者ID:JinWooShin，项目名称:Dynamo，代码行数:86，代码来源:DirectoryPathMutator.cs

示例12: RunTest

        public override bool RunTest(NodeModel node, EngineController engine, StreamWriter writer)
        {
            const bool pass = false;

            var nodes = DynamoViewModel.Model.CurrentWorkspace.Nodes;
            if (nodes.Count() == 0)
                return pass;

            int nodesCountBeforeCopying = nodes.Count();

            int numberOfUndosNeeded = this.Mutate(node);
            Thread.Sleep(10);

            writer.WriteLine("### - Beginning undo");
            for (int iUndo = 0; iUndo < numberOfUndosNeeded; iUndo++)
            {
                DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                {
                    DynamoModel.UndoRedoCommand undoCommand =
                        new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
                    DynamoViewModel.ExecuteCommand(undoCommand);

                }));
                Thread.Sleep(0);
            }
            writer.WriteLine("### - undo complete");
            writer.Flush();

            ExecuteAndWait();

            writer.WriteLine("### - Beginning test of CopyNode");
            if (node.OutPorts.Count > 0)
            {
                try
                {
                    int nodesCountAfterCopying = DynamoViewModel.Model.CurrentWorkspace.Nodes.Count();

                    if (nodesCountBeforeCopying != nodesCountAfterCopying)
                    {
                        writer.WriteLine("!!!!!!!!!!! - test of CopyNode is failed");
                        writer.WriteLine(node.GUID);

                        writer.WriteLine("Was: " + nodesCountAfterCopying);
                        writer.WriteLine("Should have been: " + nodesCountBeforeCopying);
                        writer.Flush();
                        return pass;
                    }
                    else
                    {
                        writer.WriteLine("### - test of CopyNode is passed");
                        writer.Flush();
                    }

                }
                catch (Exception)
                {
                    writer.WriteLine("!!!!!!!!!!! - test of CopyNode is failed");
                    writer.Flush();
                    return pass;
                }
            }
            writer.WriteLine("### - test of CopyNode complete");
            writer.Flush();

            return true;
        }

开发者ID:norbertzsiros，项目名称:Dynamo，代码行数:66，代码来源:CopyNodeMutator.cs

示例13: RunTest

        public override bool RunTest(NodeModel node, EngineController engine, StreamWriter writer)
        {
            bool pass = false;

            var types = LoadAllTypesFromDynamoAssemblies();

            foreach (Type type in types)
            {
                string nodeName = GetName(type);

                var firstNodeConnectors = node.AllConnectors.ToList();

                double coordinatesX = node.X;
                double coordinatesY = node.Y;

                if (!string.IsNullOrEmpty(nodeName))
                {
                    DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                    {
                        var newNode = type.GetDefaultConstructor<NodeModel>()();

                        DynamoModel.CreateNodeCommand createCommand =
                            new DynamoModel.CreateNodeCommand(
                                newNode, coordinatesX, coordinatesY, false, false);

                        DynamoViewModel.ExecuteCommand(createCommand);
                    }));

                    var valueMap = new Dictionary<Guid, String>();
                    foreach (ConnectorModel connector in firstNodeConnectors)
                    {
                        Guid guid = connector.Start.Owner.GUID;
                        Object data = connector.Start.Owner.GetValue(0, engine).Data;
                        String val = data != null ? data.ToString() : "null";
                        valueMap.Add(guid, val);
                        writer.WriteLine(guid + " :: " + val);
                        writer.Flush();
                    }

                    int numberOfUndosNeeded = Mutate(node);
                    Thread.Sleep(100);

                    writer.WriteLine("### - Beginning undo");
                    for (int iUndo = 0; iUndo < numberOfUndosNeeded; iUndo++)
                    {
                        DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                        {
                            DynamoModel.UndoRedoCommand undoCommand =
                                new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);

                            DynamoViewModel.ExecuteCommand(undoCommand);
                        }));
                    }
                    Thread.Sleep(100);

                    writer.WriteLine("### - undo complete");
                    writer.Flush();

                    DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                    {
                        DynamoModel.RunCancelCommand runCancel =
                            new DynamoModel.RunCancelCommand(false, false);

                        DynamoViewModel.ExecuteCommand(runCancel);
                    }));
                    while (!DynamoViewModel.HomeSpace.RunSettings.RunEnabled)
                    {
                        Thread.Sleep(10);
                    }

                    writer.WriteLine("### - Beginning test of CustomNode");
                    if (node.OutPorts.Count > 0)
                    {
                        try
                        {
                            NodeModel nodeAfterUndo =
                                DynamoViewModel.Model.CurrentWorkspace.Nodes.FirstOrDefault(
                                    (t) => (t.GUID == node.GUID));

                            if (nodeAfterUndo != null)
                            {
                                var firstNodeConnectorsAfterUndo = nodeAfterUndo.AllConnectors.ToList();
                                foreach (ConnectorModel connector in firstNodeConnectors)
                                {
                                    Guid guid = connector.Start.Owner.GUID;
                                    Object data = connector.Start.Owner.GetValue(0, engine).Data;
                                    String val = data != null ? data.ToString() : "null";

                                    if (valueMap[guid] != val)
                                    {
                                        writer.WriteLine("!!!!!!!!!!! - test of CustomNode is failed");
                                        writer.WriteLine(node.GUID);

                                        writer.WriteLine("Was: " + val);
                                        writer.WriteLine("Should have been: " + valueMap[guid]);
                                        writer.Flush();
                                        return pass;
                                    }
                                }
                            }
//.........这里部分代码省略.........

开发者ID:norbertzsiros，项目名称:Dynamo，代码行数:101，代码来源:CustomNodeCompatibilityMutator.cs

示例14: RunTest

        public override bool RunTest(NodeModel node, EngineController engine, StreamWriter writer)
        {
            bool pass = false;

            int workspaceIndex = DynamoViewModel.CurrentWorkspaceIndex;

            var firstNodeConnectors = node.AllConnectors.ToList();

            var valueMap = new Dictionary<Guid, String>();
            foreach (ConnectorModel connector in firstNodeConnectors)
            {
                if (connector.End.Owner.GUID != node.GUID)
                {
                    Guid guid = connector.Start.Owner.GUID;
                    Object data = connector.Start.Owner.GetValue(0, engine).Data;
                    String val = data != null ? data.ToString() : "null";
                    valueMap.Add(guid, val);
                    writer.WriteLine(guid + " :: " + val);
                    writer.Flush();
                }
            }

            string customNodeFilePath = string.Empty;

            var function = node as Function;
            CustomNodeInfo info = null;
            if (function != null)
            {
                var id = function.Definition.FunctionId;
                if (DynamoViewModel.Model.CustomNodeManager.TryGetNodeInfo(id, out info))
                {
                    customNodeFilePath = info.Path;
                }
            }

            var workspaces = DynamoViewModel.Model.Workspaces;

            if (File.Exists(customNodeFilePath))
            {
                DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                {
                    DynamoModel.OpenFileCommand openFile =
                        new DynamoModel.OpenFileCommand(customNodeFilePath);

                    DynamoViewModel.ExecuteCommand(openFile);
                }));
                Thread.Sleep(100);

                var nodesInCustomNodeBeforeMutation =
                    workspaces.FirstOrDefault((t) => (t.Name == info.Name)).Nodes.ToList();

                var customNodeStructureBeforeMutation = 
                    GetDictionaryOfConnectedNodes(nodesInCustomNodeBeforeMutation);

                int numberOfUndosNeeded = Mutate(node);
                Thread.Sleep(100);
                
                writer.WriteLine("### - Beginning undo");
                for (int iUndo = 0; iUndo < numberOfUndosNeeded; iUndo++)
                {
                    DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                    {
                        DynamoModel.UndoRedoCommand undoCommand =
                            new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);

                        DynamoViewModel.ExecuteCommand(undoCommand);
                    }));
                    Thread.Sleep(100);
                }
                writer.WriteLine("### - undo complete");
                writer.Flush();

                DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                {
                    DynamoModel.RunCancelCommand runCancel =
                        new DynamoModel.RunCancelCommand(false, false);

                    DynamoViewModel.ExecuteCommand(runCancel);
                }));
                while (!DynamoViewModel.HomeSpace.RunSettings.RunEnabled)
                {
                    Thread.Sleep(10);
                }

                DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                {
                    DynamoModel.SwitchTabCommand switchCmd =
                        new DynamoModel.SwitchTabCommand(workspaceIndex);

                    DynamoViewModel.ExecuteCommand(switchCmd);
                }));
                Thread.Sleep(100);

                var nodesInCustomNodeAfterMutation =
                    workspaces.FirstOrDefault((t) => (t.Name == info.Name)).Nodes.ToList();

                var customNodeStructureAfterMutation = 
                    GetDictionaryOfConnectedNodes(nodesInCustomNodeAfterMutation);

                writer.WriteLine("### - Beginning test of CustomNode structure");
//.........这里部分代码省略.........

开发者ID:rafatahmed，项目名称:Dynamo，代码行数:101，代码来源:CustomNodeMutator.cs

示例15: RunTest

        public override bool RunTest(NodeModel node, EngineController engine, StreamWriter writer)
        {
            bool pass = false;

            var nodes = DynamoViewModel.Model.CurrentWorkspace.Nodes;
            if (nodes.Count() == 0)
                return true;

            int nodesCountBeforeDelete = nodes.Count();

            writer.WriteLine("### - Beginning readout");
            
            writer.WriteLine("### - Beginning delete");
            writer.WriteLine("### - Deletion target: " + node.GUID);

            int numberOfUndosNeeded = Mutate(node);

            Thread.Sleep(0);

            writer.WriteLine("### - delete complete");
            writer.Flush();

            writer.WriteLine("### - Beginning re-exec");

            DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
            {
                DynamoModel.RunCancelCommand runCancel =
                    new DynamoModel.RunCancelCommand(false, false);

                DynamoViewModel.ExecuteCommand(runCancel);
            }));
            Thread.Sleep(0);

            writer.WriteLine("### - re-exec complete");
            writer.Flush();

            writer.WriteLine("### - Beginning undo");

            int nodesCountAfterDelete = DynamoViewModel.Model.CurrentWorkspace.Nodes.Count();

            if (nodesCountBeforeDelete > nodesCountAfterDelete)
            {
                for (int iUndo = 0; iUndo < numberOfUndosNeeded; iUndo++)
                {
                    DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                    {
                        DynamoModel.UndoRedoCommand undoCommand =
                            new DynamoModel.UndoRedoCommand(
                                DynamoModel.UndoRedoCommand.Operation.Undo);

                        DynamoViewModel.ExecuteCommand(undoCommand);
                    }));
                    Thread.Sleep(0);
                }
                writer.WriteLine("### - undo complete");
                writer.Flush();

                writer.WriteLine("### - Beginning re-exec");

                ExecuteAndWait();
                writer.WriteLine("### - re-exec complete");
                writer.Flush();

                int nodesCountAfterUbdo = DynamoViewModel.Model.CurrentWorkspace.Nodes.Count();
                if (nodesCountBeforeDelete == nodesCountAfterUbdo)
                    writer.WriteLine("### - Node was restored");
                else
                {
                    writer.WriteLine("### - Node wasn't restored");
                    return pass;
                }
                writer.Flush();
            }
            else
            {
                writer.WriteLine("### - Error removing a node");
                writer.Flush();
                return pass;
            }
            return pass = true;
        }

开发者ID:rafatahmed，项目名称:Dynamo，代码行数:81，代码来源:DeleteNodeMutator.cs

示例16: RunTest

        public override bool RunTest(NodeModel node, StreamWriter writer)
        {
            bool pass = false;        

            writer.WriteLine("### - Beginning readout");

            var valueMap = new Dictionary<Guid, String>();
            if (node.OutPorts.Count > 0)
            {
                Guid guid = node.GUID;
                Object data = node.GetValue(0).Data;
                String val = data != null ? data.ToString() : "null";
                valueMap.Add(guid, val);
                writer.WriteLine(guid + " :: " + val);
                writer.Flush();
            }

            writer.WriteLine("### - Readout complete");
            writer.Flush();

            writer.WriteLine("### - Beginning delete");
            writer.WriteLine("### - Deletion target: " + node.GUID);

            int numberOfUndosNeeded = Mutate(node);
            Thread.Sleep(100);

            writer.WriteLine("### - delete complete");
            writer.Flush();

            writer.WriteLine("### - Beginning re-exec");

            DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
            {
                DynamoModel.RunCancelCommand runCancel =
                    new DynamoModel.RunCancelCommand(false, false);

                DynamoViewModel.ExecuteCommand(runCancel);
            }));
            Thread.Sleep(100);

            writer.WriteLine("### - re-exec complete");
            writer.Flush();

            writer.WriteLine("### - Beginning undo");

            for (int iUndo = 0; iUndo < numberOfUndosNeeded; iUndo++)
            {
                DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
                {
                    DynamoModel.UndoRedoCommand undoCommand =
                        new DynamoModel.UndoRedoCommand(
                            DynamoModel.UndoRedoCommand.Operation.Undo);

                    DynamoViewModel.ExecuteCommand(undoCommand);
                }));
            }
            Thread.Sleep(100);

            writer.WriteLine("### - undo complete");
            writer.Flush();

            writer.WriteLine("### - Beginning re-exec");

            DynamoViewModel.UIDispatcher.Invoke(new Action(() =>
            {
                DynamoModel.RunCancelCommand runCancel =
                    new DynamoModel.RunCancelCommand(false, false);

                DynamoViewModel.ExecuteCommand(runCancel);
            }));
            Thread.Sleep(10);
            while (DynamoViewModel.Model.Runner.Running)
            {
                Thread.Sleep(10);
            }

            writer.WriteLine("### - re-exec complete");
            writer.Flush();

            writer.WriteLine("### - Beginning readback");

            if (node.OutPorts.Count > 0)
            {
                try
                {
                    String valmap = valueMap[node.GUID].ToString();
                    Object data = node.GetValue(0).Data;
                    String nodeVal = data != null ? data.ToString() : "null";

                    if (valmap != nodeVal)
                    {
                        writer.WriteLine("!!!!!!!!!!! Read-back failed");
                        writer.WriteLine(node.GUID);

                        writer.WriteLine("Was: " + nodeVal);
                        writer.WriteLine("Should have been: " + valmap);
                        writer.Flush();
                        return pass;
                    }
                }
//.........这里部分代码省略.........

开发者ID:whztt07，项目名称:Dynamo，代码行数:101，代码来源:CodeBlockNodeMutator.cs

注：本文中的Dynamo.Models.DynamoModel.UndoRedoCommand类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C# Models.FunctionNamePromptEventArgs类代码示例发布时间：2022-05-24

C# Models.DynamoModel类代码示例发布时间：2022-05-24

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19128|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9972|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8626|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8641|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C# DynamoModel.UndoRedoCommand类代码示例

示例1: Redo

示例2: TestNodeToCodeUndoBase

示例3: RunTest

示例4: TestBasicNode2CodeWorkFlow2

示例5: TestBasicNode2CodeWorkFlow4

示例6: MutationTest

示例7: TestBasicNode2CodeWorkFlow1

示例8: UndoTest

示例9: MutationTest

示例10: RunTest

示例11: RunTest

示例12: RunTest

示例13: RunTest

示例14: RunTest

示例15: RunTest

示例16: RunTest

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

美元符号为什么是“$”

Mekolaos/Aternos-On-Discord: A Discord B

Matlab练习1

FNNDSC/matlab: Matlab Projects and Snipp

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053