C# QueryStatusResult类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› c#›C#教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C#中QueryStatusResult类的典型用法代码示例。如果您正苦于以下问题：C# QueryStatusResult类的具体用法？C# QueryStatusResult怎么用？C# QueryStatusResult使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

QueryStatusResult类属于命名空间，在下文中一共展示了QueryStatusResult类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C#代码示例。

示例1: QueryStatusOnNode

 internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result) {
     //Hide Exclude from Project command, show everything else normal Folder node supports
     if (cmdGroup == Microsoft.VisualStudioTools.Project.VsMenus.guidStandardCommandSet2K) {
         switch ((VsCommands2K)cmd) {
             case VsCommands2K.EXCLUDEFROMPROJECT:
                 if (ItemNode.IsExcluded) {
                     result |= QueryStatusResult.NOTSUPPORTED | QueryStatusResult.INVISIBLE;
                     return VSConstants.S_OK;
                 }
                 break;
             case VsCommands2K.INCLUDEINPROJECT:
                 if (ItemNode.IsExcluded) {
                     result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                     return VSConstants.S_OK;
                 }
                 break;
             case CommonConstants.OpenFolderInExplorerCmdId:
                 result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                 return VSConstants.S_OK;
         }
     } else if (cmdGroup == ProjectMgr.SharedCommandGuid) {
         switch ((SharedCommands)cmd) {
             case SharedCommands.AddExistingFolder:
                 result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                 return VSConstants.S_OK;
         }
     }
     return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
 }

开发者ID:vairam-svs，项目名称:poshtools，代码行数:29，代码来源:CommonFolderNode.cs

示例2: QueryStatusOnNode

 internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
 {
     if (IsEntryPoint)
     {
         if (cmdGroup == Microsoft.VisualStudioTools.Project.VsMenus.guidStandardCommandSet97
             && (VsCommands)cmd == VsCommands.Rename
             || (VsCommands)cmd == VsCommands.Cut)
         {
             result |= QueryStatusResult.NOTSUPPORTED;
             return (int)OleConstants.OLECMDERR_E_NOTSUPPORTED;
         }
         if (cmdGroup == Microsoft.VisualStudioTools.Project.VsMenus.guidStandardCommandSet2K
             && (VsCommands2K)cmd == VsCommands2K.EXCLUDEFROMPROJECT)
         {
             result |= QueryStatusResult.NOTSUPPORTED;
             return (int)OleConstants.OLECMDERR_E_NOTSUPPORTED;
         }
     }
     if (cmdGroup == Microsoft.VisualStudioTools.Project.VsMenus.guidStandardCommandSet2K
         && (VsCommands2K)cmd == VsCommands2K.INCLUDEINPROJECT
         && ItemNode.ItemTypeName == null)
     {
         result |= QueryStatusResult.NOTSUPPORTED;
         return (int)OleConstants.OLECMDERR_E_NOTSUPPORTED;
     }
     return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
 }

开发者ID:whuthj，项目名称:VisualRust，代码行数:27，代码来源:FolderNode.cs

示例3: QueryStatusOnNode

		/// <summary>
		/// Disable certain commands for dependent file nodes 
		/// </summary>
		internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
		{
			if(cmdGroup == VsMenus.guidStandardCommandSet97)
			{
				switch((VsCommands)cmd)
				{
					case VsCommands.Copy:
					case VsCommands.Paste:
					case VsCommands.Cut:
					case VsCommands.Rename:
						result |= QueryStatusResult.NOTSUPPORTED;
						return VSConstants.S_OK;

					case VsCommands.ViewCode:
					case VsCommands.Open:
					case VsCommands.OpenWith:
						result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
						return VSConstants.S_OK;
				}
			}
			else if(cmdGroup == VsMenus.guidStandardCommandSet2K)
			{
				if((VsCommands2K)cmd == VsCommands2K.EXCLUDEFROMPROJECT)
				{
					result |= QueryStatusResult.NOTSUPPORTED;
					return VSConstants.S_OK;
				}
			}
			else
			{
				return (int)OleConstants.OLECMDERR_E_UNKNOWNGROUP;
			}
			return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
		}

开发者ID:vairam-svs，项目名称:poshtools，代码行数:37，代码来源:DependentFileNode.cs

示例4: QueryStatusOnNode

        internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result) {
            if (cmdGroup == Guids.NodejsNpmCmdSet) {
                switch (cmd) {
                    case PkgCmdId.cmdidNpmUpdateModules:
                        if (_parent.IsCurrentStateASuppressCommandsMode()) {
                            result = QueryStatusResult.SUPPORTED;
                        }
                        else {
                            if (AllChildren.Any()) {
                                result = QueryStatusResult.ENABLED | QueryStatusResult.SUPPORTED;
                            }
                            else {
                                result = QueryStatusResult.SUPPORTED;
                            }
                        }
                        return VSConstants.S_OK;

                    case PkgCmdId.cmdidNpmInstallModules:
                    case PkgCmdId.cmdidNpmInstallSingleMissingModule:
                    case PkgCmdId.cmdidNpmUninstallModule:
                    case PkgCmdId.cmdidNpmUpdateSingleModule:
                    case PkgCmdId.cmdidNpmOpenModuleHomepage:
                        result = QueryStatusResult.SUPPORTED | QueryStatusResult.INVISIBLE;
                        return VSConstants.S_OK;
                }
            }

            return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:paladique，项目名称:nodejstools，代码行数:29，代码来源:LocalModulesNode.cs

示例5: QueryStatusOnNode

        protected override int QueryStatusOnNode(Guid guidCmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
        {
            if (guidCmdGroup == Microsoft.VisualStudio.Shell.VsMenus.guidStandardCommandSet97)
            {
                switch ((VsCommands)cmd)
                {
                    case VsCommands.AddNewItem:
                    case VsCommands.AddExistingItem:
                    case VsCommands.ViewCode:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;
                    case VsCommands.ViewForm:
                        if (SubType == "Form")
                            result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;
                }
            }
            else if (guidCmdGroup == RubyMenus.guidRubyProjectCmdSet && cmd == RubyMenus.SetAsMain.ID)
            {
                result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                return VSConstants.S_OK;
            }
 
            return base.QueryStatusOnNode(guidCmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:chunlea，项目名称:rubydotnetcompiler，代码行数:25，代码来源:RubyFileNode.cs

示例6: QueryStatusOnNode

 internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
 {
     if (cmdGroup == Microsoft.VisualStudioTools.Project.VsMenus.guidStandardCommandSet2K
         && (VsCommands2K)cmd == VsCommands2K.INCLUDEINPROJECT)
     {
         result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
         return (int)VSConstants.S_OK;
     }
     return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
 }

开发者ID:whuthj，项目名称:VisualRust，代码行数:10，代码来源:UntrackedFileNode.cs

示例7: QueryStatusOnNode

        /// <inheritdoc />
        protected override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText,
          ref QueryStatusResult result)
        {
            if(cmdGroup == GuidList.guidSandcastleBuilderPackageCmdSet && cmd == PkgCmdIDList.AddDocSource)
            {
                result |= QueryStatusResult.SUPPORTED | QueryStatusResult.INVISIBLE;
                return VSConstants.S_OK;
            }

            return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:julianhaslinger，项目名称:SHFB，代码行数:12，代码来源:SandcastleBuilderComReferenceNode.cs

示例8: QueryStatusOnNode

 protected override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
 {
     //Hide Exclude from Project command, show everything else normal Folder node supports
     if (cmdGroup == Microsoft.VisualStudio.Project.VsMenus.guidStandardCommandSet2K) {
         if (cmd == CommonConstants.OpenFolderInExplorerCmdId) {
             result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
             return VSConstants.S_OK;
         }
         else if ((VsCommands2K)cmd == VsCommands2K.EXCLUDEFROMPROJECT) {
             result |= QueryStatusResult.NOTSUPPORTED | QueryStatusResult.INVISIBLE;
             return VSConstants.S_OK;
         }
     }
     return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
 }

开发者ID:TerabyteX，项目名称:main，代码行数:15，代码来源:CommonFolderNode.cs

示例9: QueryStatusOnNode

 internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
 {
     if (cmdGroup == VsMenus.guidStandardCommandSet2K && (VsCommands2K)cmd == VsCommands2K.ADDCOMPONENTS
         || cmdGroup == VSConstants.CMDSETID.StandardCommandSet12_guid && (VSConstants.VSStd12CmdID)cmd == VSConstants.VSStd12CmdID.AddReferenceProjectOnly)
     {
         result |= QueryStatusResult.SUPPORTED | QueryStatusResult.INVISIBLE;
         return (int)VSConstants.S_OK;
     }
     return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
 }

开发者ID:Boddlnagg，项目名称:VisualRust，代码行数:10，代码来源:RustProjectNode.cs

示例10: QueryStatusOnNode

 internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
 {
     if (cmdGroup == VsMenus.guidStandardCommandSet2K)
     {
         if ((VsCommands2K)cmd == VsCommands2K.QUICKOBJECTSEARCH)
         {
             result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
             return VSConstants.S_OK;
         }
     }
     else if (cmdGroup == VSProjectConstants.FSharpSendThisReferenceToInteractiveCmd.Guid && cmd == VSProjectConstants.FSharpSendThisReferenceToInteractiveCmd.ID)
     {
         if (CanBeReferencedFromFSI())
         {
             result |= QueryStatusResult.SUPPORTED; 
             if (GetReferenceForFSI() != null)
             {
                 result |= QueryStatusResult.ENABLED;
             }
         }
         
         return VSConstants.S_OK;
     }
     else
     {
         return (int)OleConstants.OLECMDERR_E_UNKNOWNGROUP;
     }
     return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
 }

开发者ID:CaptainHayashi，项目名称:visualfsharp，代码行数:29，代码来源:ReferenceNode.cs

示例11: QueryStatusOnNode

        protected override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
        {
            WixProjectNode projectNode = this.ProjectMgr as WixProjectNode;
            if (projectNode != null && projectNode.QueryStatusOnProjectNode(cmdGroup, cmd, ref result))
            {
                return VSConstants.S_OK;
            }
            else if (cmdGroup == VsMenus.guidStandardCommandSet2K)
            {
                if ((VsCommands2K)cmd == VsCommands2K.QUICKOBJECTSEARCH)
                {
                    Guid browseGuid = this.GetBrowseGuid();
                    if (browseGuid != Guid.Empty)
                    {
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                    }
                    else
                    {
                        result |= QueryStatusResult.NOTSUPPORTED;
                    }

                    return VSConstants.S_OK;
                }
            }

            return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:Jeremiahf，项目名称:wix3，代码行数:27，代码来源:WixProjectReferenceNode.cs

示例12: QueryStatusOnNode

 internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
 {
     if (cmdGroup == VsMenus.guidStandardCommandSet97)
     {
         switch ((VsCommands)cmd)
         {
             case VsCommands.AddNewItem:
             case VsCommands.AddExistingItem:
                 result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                 return VSConstants.S_OK;
         }
     }
     else if (cmdGroup == VsMenus.guidStandardCommandSet2K)
     {
         if ((VsCommands2K)cmd == VsCommands2K.ADDREFERENCE)
         {
             result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
             return VSConstants.S_OK;
         }
     }
     else if(cmdGroup == VSProjectConstants.FSharpSendReferencesToInteractiveCmd.Guid)
     {
         if (cmd == VSProjectConstants.FSharpSendReferencesToInteractiveCmd.ID)
         {
             foreach(var reference in EnumReferences())
             {
                 if (!reference.CanBeReferencedFromFSI())
                 {
                     continue;
                 }
                 result |= QueryStatusResult.SUPPORTED;
                 if (reference.GetReferenceForFSI() != null)
                 {
                     result |= QueryStatusResult.ENABLED;
                     break;
                 }
             }
             return VSConstants.S_OK;
         }
     }
     else
     {
         return (int)OleConstants.OLECMDERR_E_UNKNOWNGROUP;
     }
     return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
 }

开发者ID:CaptainHayashi，项目名称:visualfsharp，代码行数:46，代码来源:ReferenceContainerNode.cs

示例13: QueryStatusOnNode

        protected override int QueryStatusOnNode(Guid guidCmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
        {
            if (guidCmdGroup == Microsoft.VisualStudio.Project.VsMenus.guidStandardCommandSet2K)
              {
              switch ((VsCommands2K)cmd)
              {
                  case VsCommands2K.ADDREFERENCE:
                      result |= QueryStatusResult.NOTSUPPORTED | QueryStatusResult.INVISIBLE;
                      return VSConstants.S_OK;
              }
              }
              else if (guidCmdGroup == Microsoft.VisualStudio.Project.VsMenus.guidStandardCommandSet97)
              {
              switch ((VsCommands)cmd)
              {
                  case VsCommands.SetStartupProject:
                  case VsCommands.Start:
                  case VsCommands.StartNoDebug:
                      result |= QueryStatusResult.NOTSUPPORTED | QueryStatusResult.INVISIBLE;
                      return VSConstants.S_OK;
              }
              }

              return base.QueryStatusOnNode(guidCmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:ldematte，项目名称:BlenXVSP，代码行数:25，代码来源:BlenXProjectNode.cs

示例14: QueryStatusOnNode

        protected override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
        {
            if ((VSConstants.VSStd2KCmdID)cmd == VSConstants.VSStd2KCmdID.ADDREFERENCE)
            {
                result |= QueryStatusResult.NOTSUPPORTED | QueryStatusResult.INVISIBLE;
                return VSConstants.S_OK;
            }

            return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:JakubLinhart，项目名称:Mac65，代码行数:10，代码来源:Mac65ProjectNode.cs

示例15: QueryStatusOnNode

        internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result) {
            if (cmdGroup == VsMenus.guidStandardCommandSet97) {
                switch ((VsCommands)cmd) {
                    case VsCommands.Copy:
                    case VsCommands.Cut:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.INVISIBLE;
                        return VSConstants.S_OK;
                }
            } else if (cmdGroup == GuidList.guidPythonToolsCmdSet) {
                switch (cmd) {
                    case PythonConstants.AddEnvironment:
                    case PythonConstants.AddVirtualEnv:
                    case PythonConstants.AddExistingVirtualEnv:
                    case PythonConstants.ViewAllEnvironments:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;
                }
            }

            return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:wenh123，项目名称:PTVS，代码行数:21，代码来源:InterpretersContainerNode.cs

示例16: QueryStatusOnNode

        internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result) {
            if (cmdGroup == VsMenus.guidStandardCommandSet97) {
                switch ((VsCommands)cmd) {
                    case VsCommands.Copy:
                    case VsCommands.Paste:
                    case VsCommands.Cut:
                    case VsCommands.Rename:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;

                    case VsCommands.NewFolder:
                        if (!IsNonMemberItem) {
                            result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                            return VSConstants.S_OK;
                        }
                        break;
                }
            } else if (cmdGroup == VsMenus.guidStandardCommandSet2K) {
                if ((VsCommands2K)cmd == VsCommands2K.EXCLUDEFROMPROJECT) {
                    result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                    return VSConstants.S_OK;
                }
            } else if (cmdGroup != ProjectMgr.SharedCommandGuid) {
                return (int)OleConstants.OLECMDERR_E_UNKNOWNGROUP;
            }
            return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:jsschultz，项目名称:PTVS，代码行数:27，代码来源:FolderNode.cs

示例17: QueryStatusOnNode

 internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result) {
     if (cmdGroup == VsMenus.guidStandardCommandSet97) {
         switch ((VsCommands)cmd) {
             case VsCommands.AddNewItem:
             case VsCommands.AddExistingItem:
                 result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                 return VSConstants.S_OK;
         }
     } else if (cmdGroup == VsMenus.guidStandardCommandSet2K) {
         if ((VsCommands2K)cmd == VsCommands2K.ADDREFERENCE) {
             result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
             return VSConstants.S_OK;
         }
     } else {
         return (int)OleConstants.OLECMDERR_E_UNKNOWNGROUP;
     }
     return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
 }

开发者ID:CforED，项目名称:Node.js-Tools-for-Visual-Studio，代码行数:18，代码来源:ReferenceContainerNode.cs

示例18: QueryStatusOnNode

        /// <summary>
        /// Handles command status on the project node. If a command cannot be handled then the base should be called.
        /// </summary>
        /// <param name="cmdGroup">A unique identifier of the command group. The pguidCmdGroup parameter can be NULL to specify the standard group.</param>
        /// <param name="cmd">The command to query status for.</param>
        /// <param name="pCmdText">Pointer to an OLECMDTEXT structure in which to return the name and/or status information of a single command. Can be NULL to indicate that the caller does not require this information.</param>
        /// <param name="result">An out parameter specifying the QueryStatusResult of the command.</param>
        /// <returns>If the method succeeds, it returns S_OK. If it fails, it returns an error code.</returns>
        protected override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
        {
            if (cmdGroup == VsMenus.guidStandardCommandSet97)
            {
                switch ((VsCommands)cmd)
                {
                    case VsCommands.Copy:
                    case VsCommands.Paste:
                    case VsCommands.Cut:
                    case VsCommands.Rename:
                    case VsCommands.Exit:
                    case VsCommands.ProjectSettings:
                    case VsCommands.BuildSln:
                    case VsCommands.UnloadProject:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;

                    case VsCommands.ViewForm:
                        if (this.HasDesigner)
                        {
                            result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                            return VSConstants.S_OK;
                        }
                        break;

                    case VsCommands.CancelBuild:
                        result |= QueryStatusResult.SUPPORTED;
                        if (this.buildInProcess)
                            result |= QueryStatusResult.ENABLED;
                        else
                            result |= QueryStatusResult.INVISIBLE;
                        return VSConstants.S_OK;

                    case VsCommands.NewFolder:
                    case VsCommands.AddNewItem:
                    case VsCommands.AddExistingItem:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;

                    case VsCommands.SetStartupProject:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;
                }
            }
            else if (cmdGroup == VsMenus.guidStandardCommandSet2K)
            {

                switch ((VsCommands2K)cmd)
                {
                    case VsCommands2K.ADDREFERENCE:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;

                    case VsCommands2K.EXCLUDEFROMPROJECT:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.INVISIBLE;
                        return VSConstants.S_OK;

                    case ExploreFolderInWindowsCommand:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;
                }
            }
            else
            {
                return (int)OleConstants.OLECMDERR_E_UNKNOWNGROUP;
            }

            return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:IntelliTect，项目名称:PowerStudio，代码行数:77，代码来源:ProjectNode.cs

示例19: QueryStatusOnNode

        protected override int QueryStatusOnNode(Guid guidCmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result)
        {
            if (VsPkgMenus.guidStandardCommandSet97 == guidCmdGroup && this.IsNonMemberItem)
            {
                switch ((VsCommands)cmd)
                {
                    case VsCommands.ViewCode:
                        result = QueryStatusResult.NOTSUPPORTED;
                        return (int)OleConstants.MSOCMDERR_E_NOTSUPPORTED;
                }
            }

            int returnCode;
            if (WixHelperMethods.QueryStatusOnProjectSourceNode(this, guidCmdGroup, cmd, ref result, out returnCode))
            {
                return returnCode;
            }

            return base.QueryStatusOnNode(guidCmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:Jeremiahf，项目名称:wix3，代码行数:20，代码来源:WixFileNode.cs

示例20: QueryStatusOnNode

        internal override int QueryStatusOnNode(Guid cmdGroup, uint cmd, IntPtr pCmdText, ref QueryStatusResult result) {
            if (cmdGroup == CommonConstants.Std97CmdGroupGuid) {
                switch ((VSConstants.VSStd97CmdID)cmd) {
                    case VSConstants.VSStd97CmdID.BuildCtx:
                    case VSConstants.VSStd97CmdID.RebuildCtx:
                    case VSConstants.VSStd97CmdID.CleanCtx:
                        result = QueryStatusResult.SUPPORTED | QueryStatusResult.INVISIBLE;
                        return VSConstants.S_OK;
                }
            } else if (cmdGroup == Microsoft.VisualStudioTools.Project.VsMenus.guidStandardCommandSet2K) {
                switch ((VsCommands2K)cmd) {
                    case VsCommands2K.ECMD_PUBLISHSELECTION:
                        if (pCmdText != IntPtr.Zero && NativeMethods.OLECMDTEXT.GetFlags(pCmdText) == NativeMethods.OLECMDTEXT.OLECMDTEXTF.OLECMDTEXTF_NAME) {
                            NativeMethods.OLECMDTEXT.SetText(pCmdText, "Publish " + this.Caption);
                        }

                        if (IsPublishingEnabled) {
                            result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        } else {
                            result |= QueryStatusResult.SUPPORTED;
                        }
                        return VSConstants.S_OK;

                    case VsCommands2K.ECMD_PUBLISHSLNCTX:
                        if (IsPublishingEnabled) {
                            result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        } else {
                            result |= QueryStatusResult.SUPPORTED;
                        }
                        return VSConstants.S_OK;
                    case CommonConstants.OpenFolderInExplorerCmdId:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;
                }
            } else if (cmdGroup == SharedCommandGuid) {
                switch ((SharedCommands)cmd) {
                    case SharedCommands.AddExistingFolder:
                        result |= QueryStatusResult.SUPPORTED | QueryStatusResult.ENABLED;
                        return VSConstants.S_OK;
            }
            }

            return base.QueryStatusOnNode(cmdGroup, cmd, pCmdText, ref result);
        }

开发者ID:vairam-svs，项目名称:poshtools，代码行数:44，代码来源:CommonProjectNode.cs

注：本文中的QueryStatusResult类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C# QueryString类代码示例发布时间：2022-05-24

C# QueryResult类代码示例发布时间：2022-05-24

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19200|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9989|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8328|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8697|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8640|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9659|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8625|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8000|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8657|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7536|2022-11-06

客服电话

电子邮件

C# QueryStatusResult类代码示例

示例1: QueryStatusOnNode

示例2: QueryStatusOnNode

示例3: QueryStatusOnNode

示例4: QueryStatusOnNode

示例5: QueryStatusOnNode

示例6: QueryStatusOnNode

示例7: QueryStatusOnNode

示例8: QueryStatusOnNode

示例9: QueryStatusOnNode

示例10: QueryStatusOnNode

示例11: QueryStatusOnNode

示例12: QueryStatusOnNode

示例13: QueryStatusOnNode

示例14: QueryStatusOnNode

示例15: QueryStatusOnNode

示例16: QueryStatusOnNode

示例17: QueryStatusOnNode

示例18: QueryStatusOnNode

示例19: QueryStatusOnNode

示例20: QueryStatusOnNode

请发表评论

全部评论

上一篇：

下一篇：

CVE-2017-20139

tumugin/NowPlayingV2: iTunes,MusicBee,fo

万里平台石家庄会场

下的笔顺,说说下的笔画,了解下的部首

starfive-tech/linux

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053