• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C# PCache类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C#中PCache的典型用法代码示例。如果您正苦于以下问题:C# PCache类的具体用法?C# PCache怎么用?C# PCache使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



PCache类属于命名空间,在下文中一共展示了PCache类的19个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C#代码示例。

示例1: pcacheCheckSynced

    //# define expensive_assert(X)
#endif

    /********************************** Linked List Management ********************/

#if !NDEBUG &&  SQLITE_ENABLE_EXPENSIVE_ASSERT
/*
** Check that the pCache.pSynced variable is set correctly. If it
** is not, either fail an Debug.Assert or return zero. Otherwise, return
** non-zero. This is only used in debugging builds, as follows:
**
**   expensive_assert( pcacheCheckSynced(pCache) );
*/
static int pcacheCheckSynced(PCache pCache){
PgHdr p ;
for(p=pCache.pDirtyTail; p!=pCache.pSynced; p=p.pDirtyPrev){
Debug.Assert( p.nRef !=0|| (p.flags&PGHDR_NEED_SYNC) !=0);
}
return (p==null || p.nRef!=0 || (p.flags&PGHDR_NEED_SYNC)==0)?1:0;
}
开发者ID:pragmat1c,项目名称:coolstorage,代码行数:20,代码来源:pcache_c.cs


示例2: Form1

        //RESTORE
        public Form1()
        {
            cacheFile = Application.StartupPath + "\\MyObj.bin";
            InitializeComponent();

            _cache = new PCache();
            if (File.Exists(cacheFile))
            {
                FileStream fs = new FileStream(cacheFile, FileMode.Open, FileAccess.Read, FileShare.None);
                byte[] array = new byte[fs.Length];
                fs.Read(array, 0, (Int32)fs.Length);
                fs.Close();
                
                //below simple method converts saved byte data into cache object
                if(array.Length>0)
                    _cache.RestoreCache(array, true);
            } 

            CleanView(true);
        }
开发者ID:wangchunlei,项目名称:MyGit,代码行数:21,代码来源:Form1.cs


示例3: sqlite3PcacheRefCount

 /*
 ** Return the total number of referenced pages held by the cache.
 */
 static int sqlite3PcacheRefCount( PCache pCache )
 {
   return pCache.nRef;
 }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:7,代码来源:pcache_c.cs


示例4: sqlite3PcacheDirtyList

 /*
 ** Return a list of all dirty pages in the cache, sorted by page number.
 */
 static PgHdr sqlite3PcacheDirtyList( PCache pCache )
 {
   PgHdr p;
   for ( p = pCache.pDirty; p != null; p = p.pDirtyNext )
   {
     p.pDirty = p.pDirtyNext;
   }
   return pcacheSortDirtyList( pCache.pDirty );
 }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:12,代码来源:pcache_c.cs


示例5: sqlite3PcacheClear

 /*
 ** Discard the contents of the cache.
 */
 static void sqlite3PcacheClear( PCache pCache )
 {
   sqlite3PcacheTruncate( pCache, 0 );
 }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:7,代码来源:pcache_c.cs


示例6: sqlite3PcacheClose

 /*
 ** Close a cache.
 */
 static void sqlite3PcacheClose( PCache pCache )
 {
   if ( pCache.pCache != null )
   {
     sqlite3GlobalConfig.pcache.xDestroy( ref pCache.pCache );
   }
 }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:10,代码来源:pcache_c.cs


示例7: sqlite3PcacheTruncate

 /*
 ** Drop every cache entry whose page number is greater than "pgno". The
 ** caller must ensure that there are no outstanding references to any pages
 ** other than page 1 with a page number greater than pgno.
 **
 ** If there is a reference to page 1 and the pgno parameter passed to this
 ** function is 0, then the data area associated with page 1 is zeroed, but
 ** the page object is not dropped.
 */
 static void sqlite3PcacheTruncate( PCache pCache, u32 pgno )
 {
   if ( pCache.pCache != null )
   {
     PgHdr p;
     PgHdr pNext;
     for ( p = pCache.pDirty; p != null; p = pNext )
     {
       pNext = p.pDirtyNext;
       /* This routine never gets call with a positive pgno except right
       ** after sqlite3PcacheCleanAll().  So if there are dirty pages,
       ** it must be that pgno==0.
       */
       Debug.Assert( p.pgno > 0 );
       if ( ALWAYS( p.pgno > pgno ) )
       {
         Debug.Assert( ( p.flags & PGHDR_DIRTY ) != 0 );
         sqlite3PcacheMakeClean( p );
       }
     }
     if ( pgno == 0 && pCache.pPage1 != null )
     {
       // memset( pCache.pPage1.pData, 0, pCache.szPage );
       pCache.pPage1.pData = sqlite3Malloc( pCache.szPage );
       pgno = 1;
     }
     sqlite3GlobalConfig.pcache.xTruncate( pCache.pCache, pgno + 1 );
   }
 }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:38,代码来源:pcache_c.cs


示例8: sqlite3PcacheSetCachesize

    /*
** Set the suggested cache-size value.
*/
    static void sqlite3PcacheSetCachesize( PCache pCache, int mxPage )
    {
      pCache.nMax = mxPage;
      if ( pCache.pCache != null )
      {
        sqlite3GlobalConfig.pcache.xCachesize( pCache.pCache, mxPage );
      }
    }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:11,代码来源:pcache_c.cs


示例9: sqlite3PcacheFetch

    /*
    ** Try to obtain a page from the cache.
    */
    static int sqlite3PcacheFetch(
    PCache pCache,       /* Obtain the page from this cache */
    u32 pgno,            /* Page number to obtain */
    int createFlag,      /* If true, create page if it does not exist already */
    ref PgHdr ppPage     /* Write the page here */
    )
    {
      PgHdr pPage = null;
      int eCreate;

      Debug.Assert( pCache != null );
      Debug.Assert( createFlag == 1 || createFlag == 0 );
      Debug.Assert( pgno > 0 );

      /* If the pluggable cache (sqlite3_pcache*) has not been allocated,
      ** allocate it now.
      */
      if ( null == pCache.pCache && createFlag != 0 )
      {
        sqlite3_pcache p;
        int nByte;
        nByte = pCache.szPage + pCache.szExtra + 0;// sizeof( PgHdr );
        p = sqlite3GlobalConfig.pcache.xCreate( nByte, pCache.bPurgeable );
        //if ( null == p )
        //{
        //  return SQLITE_NOMEM;
        //}
        sqlite3GlobalConfig.pcache.xCachesize( p, pCache.nMax );
        pCache.pCache = p;
      }

      eCreate = createFlag * ( 1 + ( ( !pCache.bPurgeable || null == pCache.pDirty ) ? 1 : 0 ) );

      if ( pCache.pCache != null )
      {
        pPage = sqlite3GlobalConfig.pcache.xFetch( pCache.pCache, pgno, eCreate );
      }

      if ( null == pPage && eCreate == 1 )
      {
        PgHdr pPg;

        /* Find a dirty page to write-out and recycle. First try to find a
        ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC
        ** cleared), but if that is not possible settle for any other
        ** unreferenced dirty page.
        */
#if SQLITE_ENABLE_EXPENSIVE_ASSERT
expensive_assert( pcacheCheckSynced(pCache) );
#endif
        for ( pPg = pCache.pSynced;
        pPg != null && ( pPg.nRef != 0 || ( pPg.flags & PGHDR_NEED_SYNC ) != 0 );
        pPg = pPg.pDirtyPrev
        )
          ;
        pCache.pSynced = pPg;
        if ( null == pPg )
        {
          for ( pPg = pCache.pDirtyTail; pPg != null && pPg.nRef != 0; pPg = pPg.pDirtyPrev )
            ;
        }
        if ( pPg != null )
        {
          int rc;
#if SQLITE_LOG_CACHE_SPILL
      sqlite3_log(SQLITE_FULL, 
                  "spill page %d making room for %d - cache used: %d/%d",
                  pPg->pgno, pgno,
                  sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache),
                  pCache->nMax);
#endif
          rc = pCache.xStress( pCache.pStress, pPg );
          if ( rc != SQLITE_OK && rc != SQLITE_BUSY )
          {
            return rc;
          }
        }

        pPage = sqlite3GlobalConfig.pcache.xFetch( pCache.pCache, pgno, 2 );
      }

      if ( pPage != null )
      {
        if ( null == pPage.pData )
        {
          //          memset(pPage, 0, sizeof(PgHdr));
          pPage.pData = sqlite3Malloc( pCache.szPage );//          pPage->pData = (void*)&pPage[1];
          //pPage->pExtra = (void*)&((char*)pPage->pData)[pCache->szPage];
          //memset(pPage->pExtra, 0, pCache->szExtra);
          pPage.pCache = pCache;
          pPage.pgno = pgno;
        }
        Debug.Assert( pPage.pCache == pCache );
        Debug.Assert( pPage.pgno == pgno );
        //assert(pPage->pData == (void*)&pPage[1]);
        //assert(pPage->pExtra == (void*)&((char*)&pPage[1])[pCache->szPage]);
        if ( 0 == pPage.nRef )
//.........这里部分代码省略.........
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:101,代码来源:pcache_c.cs


示例10: sqlite3PcacheSetPageSize

 /*
 ** Change the page size for PCache object. The caller must ensure that there
 ** are no outstanding page references when this function is called.
 */
 static void sqlite3PcacheSetPageSize( PCache pCache, int szPage )
 {
   Debug.Assert( pCache.nRef == 0 && pCache.pDirty == null );
   if ( pCache.pCache != null )
   {
     sqlite3GlobalConfig.pcache.xDestroy( ref pCache.pCache );
     pCache.pCache = null;
   }
   pCache.szPage = szPage;
 }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:14,代码来源:pcache_c.cs


示例11: sizeof

    }// sizeof( PCache ); }

    /*
    ** Create a new PCache object. Storage space to hold the object
    ** has already been allocated and is passed in as the p pointer.
    ** The caller discovers how much space needs to be allocated by
    ** calling sqlite3PcacheSize().
    */
    static void sqlite3PcacheOpen(
    int szPage,                  /* Size of every page */
    int szExtra,                 /* Extra space associated with each page */
    bool bPurgeable,             /* True if pages are on backing store */
    dxStress xStress,//int (*xStress)(void*,PgHdr*),/* Call to try to make pages clean */
    object pStress,              /* Argument to xStress */
    PCache p                     /* Preallocated space for the PCache */
    )
    {
      p.Clear();//memset(p, 0, sizeof(PCache));
      p.szPage = szPage;
      p.szExtra = szExtra;
      p.bPurgeable = bPurgeable;
      p.xStress = xStress;
      p.pStress = pStress;
      p.nMax = 100;
    }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:25,代码来源:pcache_c.cs


示例12: sqlite3PcacheTruncate

 /*
 ** Drop every cache entry whose page number is greater than "pgno". The
 ** caller must ensure that there are no outstanding references to any pages
 ** other than page 1 with a page number greater than pgno.
 **
 ** If there is a reference to page 1 and the pgno parameter passed to this
 ** function is 0, then the data area associated with page 1 is zeroed, but
 ** the page object is not dropped.
 */
 static void sqlite3PcacheTruncate( PCache pCache, u32 pgno )
 {
   if ( pCache.pCache != null )
   {
     PgHdr p;
     PgHdr pNext;
     for ( p = pCache.pDirty ; p != null ; p = pNext )
     {
       pNext = p.pDirtyNext;
       if ( p.pgno > pgno )
       {
         Debug.Assert( ( p.flags & PGHDR_DIRTY ) != 0 );
         sqlite3PcacheMakeClean( p );
       }
     }
     if ( pgno == 0 && pCache.pPage1 != null )
     {
       pCache.pPage1.pData = new byte[pCache.szPage];// memset( pCache.pPage1.pData, 0, pCache.szPage );
       pgno = 1;
     }
     sqlite3GlobalConfig.pcache.xTruncate( pCache.pCache, pgno + 1 );
   }
 }
开发者ID:mbahar94,项目名称:fracture,代码行数:32,代码来源:pcache_c.cs


示例13: sqlite3PcachePagecount

 /*
 ** Return the total number of pages in the cache.
 */
 static int sqlite3PcachePagecount( PCache pCache )
 {
   int nPage = 0;
   if ( pCache.pCache != null )
   {
     nPage = sqlite3GlobalConfig.pcache.xPagecount( pCache.pCache );
   }
   return nPage;
 }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:12,代码来源:pcache_c.cs


示例14: sqlite3PcacheGetCachesize

    /*
** Get the suggested cache-size value.
*/
    static int sqlite3PcacheGetCachesize( PCache pCache )
    {
      return pCache.nMax;
    }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:7,代码来源:pcache_c.cs


示例15: sqlite3PcacheCleanAll

 /*
 ** Make every page in the cache clean.
 */
 static void sqlite3PcacheCleanAll( PCache pCache )
 {
   PgHdr p;
   while ( ( p = pCache.pDirty ) != null )
   {
     sqlite3PcacheMakeClean( p );
   }
 }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:11,代码来源:pcache_c.cs


示例16: sqlite3PcacheIterateDirty

    /*
** For all dirty pages currently in the cache, invoke the specified
** callback. This is only used if the SQLITE_CHECK_PAGES macro is
** defined.
*/
    static void sqlite3PcacheIterateDirty( PCache pCache, dxIter xIter )
    {
      PgHdr pDirty;
      for ( pDirty = pCache.pDirty; pDirty != null; pDirty = pDirty.pDirtyNext )
      {
        xIter( pDirty );
      }
    }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:13,代码来源:pcache_c.cs


示例17: sqlite3PcacheClearSyncFlags

 /*
 ** Clear the PGHDR_NEED_SYNC flag from all dirty pages.
 */
 static void sqlite3PcacheClearSyncFlags( PCache pCache )
 {
   PgHdr p;
   for ( p = pCache.pDirty; p != null; p = p.pDirtyNext )
   {
     p.flags &= ~PGHDR_NEED_SYNC;
   }
   pCache.pSynced = pCache.pDirtyTail;
 }
开发者ID:Jaden-J,项目名称:csharp-sqlite,代码行数:12,代码来源:pcache_c.cs


示例18: Clear

			public void Clear()
			{
				sqlite3_free(ref this.pData);
				this.pData = null;
				this.pExtra = null;
				this.pDirty = null;
				this.pgno = 0;
				this.pPager = null;
#if SQLITE_CHECK_PAGES
this.pageHash=0;
#endif
				this.flags = 0;
				this.nRef = 0;
				this.CacheAllocated = false;
				this.pCache = null;
				this.pDirtyNext = null;
				this.pDirtyPrev = null;
				this.pPgHdr1 = null;
			}
开发者ID:broettge,项目名称:MatterControl,代码行数:19,代码来源:pcache_h.cs


示例19: Clear

      public void Clear()
      {
        this.pData = null;
        this.pExtra = null;
        this.pDirty = null;
        this.pgno = 0;
        this.pPager = null;
#if SQLITE_CHECK_PAGES
this.pageHash=0;
#endif
        this.flags = 0;
        this.nRef = 0;
        this.pCache = null;
        this.pDirtyNext = null;
        this.pDirtyPrev = null;
        this.pPgHdr1 = null;
      }
开发者ID:mbahar94,项目名称:fracture,代码行数:17,代码来源:pcache_h.cs



注:本文中的PCache类示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C# PDT_ProductBLL类代码示例发布时间:2022-05-24
下一篇:
C# PBXDictionary类代码示例发布时间:2022-05-24
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap