• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C# ICoordinateSystem类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C#中ICoordinateSystem的典型用法代码示例。如果您正苦于以下问题:C# ICoordinateSystem类的具体用法?C# ICoordinateSystem怎么用?C# ICoordinateSystem使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



ICoordinateSystem类属于命名空间,在下文中一共展示了ICoordinateSystem类的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C#代码示例。

示例1: ActualCoordinateSystem

        internal ActualCoordinateSystem(ICoordinateSystem coordinateSystem)
        {
            if (coordinateSystem == null)
                throw new ArgumentNullException("coordinateSystem"); //NOXLATE

            CoordinateTransformationFactory f = new CoordinateTransformationFactory();
            CoordinateSystemFactory cf = new CoordinateSystemFactory();

            m_transform = f.CreateFromCoordinateSystems(coordinateSystem, cf.CreateFromWkt(XY_M));
        }
开发者ID:kanbang,项目名称:Colt,代码行数:10,代码来源:ActualCoordinateSystem.cs


示例2: CreateFromCoordinateSystems

        /// <summary>
        /// Creates a transformation between two coordinate systems.
        /// </summary>
        /// <remarks>
        /// This method will examine the coordinate systems in order to construct
        /// a transformation between them. This method may fail if no path between 
        /// the coordinate systems is found, using the normal failing behavior of 
        /// the DCP (e.g. throwing an exception).</remarks>
        /// <param name="sourceCS">Source coordinate system</param>
        /// <param name="targetCS">Target coordinate system</param>
        /// <returns></returns>		
        public ICoordinateTransformation CreateFromCoordinateSystems(ICoordinateSystem sourceCS, ICoordinateSystem targetCS)
        {
            ICoordinateTransformation trans;
            if (sourceCS is IProjectedCoordinateSystem && targetCS is IGeographicCoordinateSystem) //Projected -> Geographic
                trans = Proj2Geog((IProjectedCoordinateSystem)sourceCS, (IGeographicCoordinateSystem)targetCS);
            else if (sourceCS is IGeographicCoordinateSystem && targetCS is IProjectedCoordinateSystem) //Geographic -> Projected
                trans = Geog2Proj((IGeographicCoordinateSystem)sourceCS, (IProjectedCoordinateSystem)targetCS);

            else if (sourceCS is IGeographicCoordinateSystem && targetCS is IGeocentricCoordinateSystem) //Geocentric -> Geographic
                trans = Geog2Geoc((IGeographicCoordinateSystem)sourceCS, (IGeocentricCoordinateSystem)targetCS);

            else if (sourceCS is IGeocentricCoordinateSystem && targetCS is IGeographicCoordinateSystem) //Geocentric -> Geographic
                trans = Geoc2Geog((IGeocentricCoordinateSystem)sourceCS, (IGeographicCoordinateSystem)targetCS);

            else if (sourceCS is IProjectedCoordinateSystem && targetCS is IProjectedCoordinateSystem) //Projected -> Projected
                trans = Proj2Proj((sourceCS as IProjectedCoordinateSystem), (targetCS as IProjectedCoordinateSystem));

            else if (sourceCS is IGeocentricCoordinateSystem && targetCS is IGeocentricCoordinateSystem) //Geocentric -> Geocentric
                trans = CreateGeoc2Geoc((IGeocentricCoordinateSystem)sourceCS, (IGeocentricCoordinateSystem)targetCS);

            else if (sourceCS is IGeographicCoordinateSystem && targetCS is IGeographicCoordinateSystem) //Geographic -> Geographic
                trans = CreateGeog2Geog(sourceCS as IGeographicCoordinateSystem, targetCS as IGeographicCoordinateSystem);
            else
                throw new NotSupportedException("No support for transforming between the two specified coordinate systems");

            //if (trans.MathTransform is ConcatenatedTransform) {
            //    List<ICoordinateTransformation> MTs = new List<ICoordinateTransformation>();
            //    SimplifyTrans(trans.MathTransform as ConcatenatedTransform, ref MTs);
            //    return new CoordinateTransformation(sourceCS,
            //        targetCS, TransformType.Transformation, new ConcatenatedTransform(MTs),
            //        String.Empty, String.Empty, -1, String.Empty, String.Empty);
            //}
            return trans;
        }
开发者ID:maxm,项目名称:osmuy,代码行数:45,代码来源:CoordinateTransformationFactory.cs


示例3: CompoundCoordinateSystem

        /// <summary>
        /// Creates a compound coordinate system.
        /// </summary>
        /// <param name="headCRS">The first coordinate system.</param>
        /// <param name="tailCRS">The second coordinate system.</param>
        /// <param name="remarks">Remarks about this object.</param>
        /// <param name="authority">The name of the authority.</param>
        /// <param name="authorityCode">The code the authority uses to identidy this object.</param>
        /// <param name="name">The name of the object.</param>
        /// <param name="alias">The alias of the object.</param>
        /// <param name="abbreviation">The abbreviated name of this object.</param>
        internal CompoundCoordinateSystem(ICoordinateSystem headCRS,
										ICoordinateSystem tailCRS,
										string remarks, string authority, string authorityCode, string name, string alias, string abbreviation)
            : base(remarks, authority, authorityCode, name, alias, abbreviation)
        {
            if (headCRS==null)
            {
                throw new ArgumentNullException("headCRS");
            }
            if (tailCRS==null)
            {
                throw new ArgumentNullException("tailCRS");
            }

            _headCRS = headCRS;
            _tailCRS = tailCRS;
            _axisInfo = new IAxisInfo[this.Dimension];

            // copy axis information
            for(int i=0;i<headCRS.Dimension;i++)
            {
                _axisInfo[i]=_headCRS.GetAxis(i);
            }
            int offset=headCRS.Dimension;
            for (int i=0;i<tailCRS.Dimension;i++)
            {
                _axisInfo[i+offset]=_tailCRS.GetAxis(i);
            }
        }
开发者ID:vmoll,项目名称:geotools,代码行数:40,代码来源:CompoundCoordinateSystem.cs


示例4: Test

        public void Test(string title, ICoordinateSystem source, ICoordinateSystem target, 
                         double[] testPoint, double[] expectedPoint,
                         double tolerance, double reverseTolerance = double.NaN)
        {
            var ct = CoordinateTransformationFactory.CreateFromCoordinateSystems(source, target);

            var forwardResult = ct.MathTransform.Transform(testPoint);
            var reverseResult = Double.IsNaN(reverseTolerance)
                                    ? testPoint
                                    : ct.MathTransform.Inverse().Transform(forwardResult);

            var forward = ToleranceLessThan(forwardResult, expectedPoint, tolerance);

            var reverse = Double.IsNaN(reverseTolerance) || 
                          ToleranceLessThan(reverseResult, testPoint, reverseTolerance);

            if (!forward)
                TransformationError(title, expectedPoint, forwardResult);
            if (!reverse)
                TransformationError(title, testPoint, reverseResult, true);

            Assert.IsTrue(forward && reverse);


        }
开发者ID:haoas,项目名称:ProjNet4GeoAPI,代码行数:25,代码来源:CoordinateTransformTestsBase.cs


示例5: Transform2Lambert

    public static ProjNet.CoordinateSystems.Transformations.ICoordinateTransformation Transform2Lambert(ICoordinateSystem source)
    {
        if (source == null)
            throw new ArgumentException("Source coordinate system is null");
        if (!(source is IGeographicCoordinateSystem))
            throw new ArgumentException("Source coordinate system must be geographic");

        CoordinateSystemFactory cFac = new CoordinateSystemFactory();

        List<ProjectionParameter> parameters = new List<ProjectionParameter>();
        parameters.Add(new ProjectionParameter("latitude_of_origin", 50));
        parameters.Add(new ProjectionParameter("central_meridian", -95));
        parameters.Add(new ProjectionParameter("standard_parallel_1", 33));
        parameters.Add(new ProjectionParameter("standard_parallel_2", 45));
        parameters.Add(new ProjectionParameter("false_easting", 0));
        parameters.Add(new ProjectionParameter("false_northing", 0));
        IProjection projection = cFac.CreateProjection("Lambert Conformal Conic 2SP", "lambert_conformal_conic_2sp",
                                                       parameters);

        IProjectedCoordinateSystem coordsys = cFac.CreateProjectedCoordinateSystem("Lambert Conformal Conic 2SP",
                                                                                   source as IGeographicCoordinateSystem,
                                                                                   projection, ProjNet.CoordinateSystems.LinearUnit.Metre,
                                                                                   new AxisInfo("East",
                                                                                                AxisOrientationEnum.East),
                                                                                   new AxisInfo("North",
                                                                                                AxisOrientationEnum.
                                                                                                    North));

        return new CoordinateTransformationFactory().CreateFromCoordinateSystems(source, coordsys);
    }
开发者ID:PedroMaitan,项目名称:sharpmap,代码行数:30,代码来源:Transformation.aspx.cs


示例6: CreateFromCoordinateSystems

 /// <summary>
 /// Creates a transformation between two coordinate systems.
 /// </summary>
 /// <remarks>
 /// This method will examine the coordinate systems in order to construct
 /// a transformation between them. This method may fail if no path between 
 /// the coordinate systems is found, using the normal failing behavior of 
 /// the DCP (e.g. throwing an exception).</remarks>
 /// <param name="sourceCS">Source coordinate system</param>
 /// <param name="targetCS">Target coordinate system</param>
 /// <returns></returns>
 public ICoordinateTransformation CreateFromCoordinateSystems(ICoordinateSystem sourceCS, ICoordinateSystem targetCS)
 {
     if ((sourceCS is IProjectedCoordinateSystem) && (targetCS is IGeographicCoordinateSystem))
     {
         return Proj2Geog((IProjectedCoordinateSystem) sourceCS, (IGeographicCoordinateSystem) targetCS);
     }
     if ((sourceCS is IGeographicCoordinateSystem) && (targetCS is IProjectedCoordinateSystem))
     {
         return Geog2Proj((IGeographicCoordinateSystem) sourceCS, (IProjectedCoordinateSystem) targetCS);
     }
     if ((sourceCS is IGeographicCoordinateSystem) && (targetCS is IGeocentricCoordinateSystem))
     {
         return Geog2Geoc((IGeographicCoordinateSystem) sourceCS, (IGeocentricCoordinateSystem) targetCS);
     }
     if ((sourceCS is IGeocentricCoordinateSystem) && (targetCS is IGeographicCoordinateSystem))
     {
         return Geoc2Geog((IGeocentricCoordinateSystem) sourceCS, (IGeographicCoordinateSystem) targetCS);
     }
     if ((sourceCS is IProjectedCoordinateSystem) && (targetCS is IProjectedCoordinateSystem))
     {
         return Proj2Proj(sourceCS as IProjectedCoordinateSystem, targetCS as IProjectedCoordinateSystem);
     }
     if ((sourceCS is IGeocentricCoordinateSystem) && (targetCS is IGeocentricCoordinateSystem))
     {
         return CreateGeoc2Geoc((IGeocentricCoordinateSystem) sourceCS, (IGeocentricCoordinateSystem) targetCS);
     }
     if (!(sourceCS is IGeographicCoordinateSystem) || !(targetCS is IGeographicCoordinateSystem))
     {
         throw new NotSupportedException("No support for transforming between the two specified coordinate systems");
     }
     return this.CreateGeog2Geog(sourceCS as IGeographicCoordinateSystem, targetCS as IGeographicCoordinateSystem);
 }
开发者ID:izambakci,项目名称:tf-net,代码行数:43,代码来源:CoordinateTransformationFactory.cs


示例7: CreateFromCoordinateSystems

        /// <summary>
        /// Creates a transformation between two coordinate systems.
        /// </summary>
        /// <remarks>
        /// This method will examine the coordinate systems in order to construct
        /// a transformation between them. This method may fail if no path between 
        /// the coordinate systems is found, using the normal failing behavior of 
        /// the DCP (e.g. throwing an exception).</remarks>
        /// <param name="sourceCS">Source coordinate system</param>
        /// <param name="targetCS">Target coordinate system</param>
        /// <returns></returns>		
        public ICoordinateTransformation CreateFromCoordinateSystems(ICoordinateSystem sourceCS, ICoordinateSystem targetCS)
        {
            if (sourceCS is IProjectedCoordinateSystem && targetCS is IGeographicCoordinateSystem) //Projected -> Geographic
                return Proj2Geog((IProjectedCoordinateSystem)sourceCS, (IGeographicCoordinateSystem)targetCS);

            else if (sourceCS is IGeographicCoordinateSystem && targetCS is IProjectedCoordinateSystem) //Geographic -> Projected
                return Geog2Proj((IGeographicCoordinateSystem)sourceCS, (IProjectedCoordinateSystem)targetCS);

            else if (sourceCS is IGeographicCoordinateSystem && targetCS is IGeocentricCoordinateSystem) //Geocentric -> Geographic
                return Geog2Geoc((IGeographicCoordinateSystem)sourceCS, (IGeocentricCoordinateSystem)targetCS);

            else if (sourceCS is IGeocentricCoordinateSystem && targetCS is IGeographicCoordinateSystem) //Geocentric -> Geographic
                return Geoc2Geog((IGeocentricCoordinateSystem)sourceCS, (IGeographicCoordinateSystem)targetCS);

            else if (sourceCS is IProjectedCoordinateSystem && targetCS is IProjectedCoordinateSystem) //Projected -> Projected
                return Proj2Proj((sourceCS as IProjectedCoordinateSystem),(targetCS as IProjectedCoordinateSystem));

            else if (sourceCS is IGeocentricCoordinateSystem && targetCS is IGeocentricCoordinateSystem) //Geocentric -> Geocentric
                return CreateGeoc2Geoc((IGeocentricCoordinateSystem)sourceCS, (IGeocentricCoordinateSystem)targetCS);

            else if (sourceCS is IGeographicCoordinateSystem && targetCS is IGeographicCoordinateSystem) //Geographic -> Geographic
                return CreateGeog2Geog(sourceCS as IGeographicCoordinateSystem, targetCS as IGeographicCoordinateSystem);

            throw new NotSupportedException("No support for transforming between the two specified coordinate systems");
        }
开发者ID:jumpinjackie,项目名称:fdotoolbox,代码行数:36,代码来源:CoordinateTransformationFactory.cs


示例8: RenderFeatures

        public void RenderFeatures(ICoordinateSystem coordsys, IEnumerable<IFeature> items)
        {
            if (items == null) return;

            m_sourceCoordsys = coordsys;

            foreach (IFeature g in items)
            {
                IGeometry geom = g.Geometry;
                if (ProjectionConverter != null)
                {
                    geom = ProjectionConverter(this, geom);
                    if (geom == null) continue;
                }

                if (Generalizer != null)
                {
                    geom = Generalizer(this, geom);
                    if (geom == null) continue;
                }

                if (CoordinateMapper != null)
                    geom = CoordinateMapper(this, geom);
                else
                    geom = PrimitiveCoordinateMapper(geom);

                if (geom == null) continue;

                Draw(geom, g.Style);
            }

            m_sourceCoordsys = null;
        }
开发者ID:mustafayalcin,项目名称:littlesharprenderengine,代码行数:33,代码来源:LittleSharpRenderEngine.cs


示例9: SqlGeography

        internal SqlGeography(SqlTypes.SqlGeography sg, ICoordinateSystem coordinateSystem)
        {
            Debug.Assert(sg!=null);
            if (sg==null)
                throw new ArgumentNullException("sg");

            _Geography=sg;
            _CoordinateSystem=coordinateSystem;
        }
开发者ID:mcartoixa,项目名称:GeoSIK,代码行数:9,代码来源:SqlGeography.cs


示例10: SpatialGeometry

        internal SpatialGeometry(DbGeometry g, ICoordinateSystem coordinateSystem)
        {
            Debug.Assert(g!=null);
            if (g==null)
                throw new ArgumentNullException("g");

            _Geometry=g;
            _CoordinateSystem=coordinateSystem;
        }
开发者ID:mcartoixa,项目名称:GeoSIK,代码行数:9,代码来源:SpatialGeometry.cs


示例11: Parse

        /// <summary>Parses the geometry defined by the specified WKT representation, in the specified coordinate system.</summary>
        /// <param name="text">The WKT representation of the geometry.</param>
        /// <param name="system">The coordinate system of the WKT representation.</param>
        public void Parse(string text, ICoordinateSystem system)
        {
            Debug.Assert(system!=null);
            if (system==null)
                throw new ArgumentNullException("system");

            _Builder=new Gml.GmlGeometryBuilder(system);
            _Builder.Parse(text, system);
        }
开发者ID:mcartoixa,项目名称:GeoSIK,代码行数:12,代码来源:SpatialGeometryBuilder.cs


示例12: IsEquivalentTo

        /// <summary>Indicates whether the current coordinate system is equivalent to the specified one.</summary>
        /// <param name="other">The coordinate system to compare the current one against.</param>
        /// <returns><c>true</c> if the coordinate systems are equivalent; or else <c>false</c>.</returns>
        public bool IsEquivalentTo(ICoordinateSystem other)
        {
            if (other==null)
                return false;

            if (Equals(other))
                return true;

            return false;
        }
开发者ID:mcartoixa,项目名称:GeoSIK,代码行数:13,代码来源:CoordinateSystem.cs


示例13: ProjNetSpatialReference

 public ProjNetSpatialReference(ICoordinateSystem cs)
 {
     var authorityCode = cs.AuthorityCode;
     if (authorityCode <= 0)
     {
         authorityCode = ++_newId;
     }
     _oid = cs.Authority ?? "SM" + ":" + authorityCode;
     Definition = cs.WKT;
     CoordinateSystem = cs;
 }
开发者ID:geobabbler,项目名称:SharpMap,代码行数:11,代码来源:ProjNetSpatialReference.cs


示例14: Convert

        public static DsProjections.ProjectionInfo Convert(ICoordinateSystem system)
        {
            if (system==null)
                return null;

            var cs=system as CoordinateSystem;
            if (cs==null)
                return DsProjections.ProjectionInfo.FromEsriString(system.ToString());

            return cs.Projection;
        }
开发者ID:mcartoixa,项目名称:GeoSIK,代码行数:11,代码来源:CoordinateSystemUtils.cs


示例15: Equals

        /// <summary>Indicates whether the current coordinate system is equal to the specified one.</summary>
        /// <param name="other">The coordinate system to compare the current one against.</param>
        /// <returns><c>true</c> if the coordinate systems are equal; or else <c>false</c>.</returns>
        public bool Equals(ICoordinateSystem other)
        {
            if (other==null)
                return false;

            var cs=other as CoordinateSystem;
            if (cs!=null)
                return _System.Equals(cs._System) || _System.EqualParams(cs._System);

            return false;
        }
开发者ID:mcartoixa,项目名称:GeoSIK,代码行数:14,代码来源:CoordinateSystem.cs


示例16: CoordinateTransformation

 /// <summary>
 /// Initializes an instance of a CoordinateTransformation
 /// </summary>
 /// <param name="sourceCS">Source coordinate system</param>
 /// <param name="targetCS">Target coordinate system</param>
 /// <param name="transformType">Transformation type</param>
 /// <param name="mathTransform">Math transform</param>
 /// <param name="name">Name of transform</param>
 /// <param name="authority">Authority</param>
 /// <param name="authorityCode">Authority code</param>
 /// <param name="areaOfUse">Area of use</param>
 /// <param name="remarks">Remarks</param>
 internal CoordinateTransformation(ICoordinateSystem sourceCS, ICoordinateSystem targetCS, Topology.CoordinateSystems.Transformations.TransformType transformType, IMathTransform mathTransform, string name, string authority, long authorityCode, string areaOfUse, string remarks)
 {
     this._TargetCS = targetCS;
     this._SourceCS = sourceCS;
     this._TransformType = transformType;
     this._MathTransform = mathTransform;
     this._Name = name;
     this._Authority = authority;
     this._AuthorityCode = authorityCode;
     this._AreaOfUse = areaOfUse;
     this._Remarks = remarks;
 }
开发者ID:izambakci,项目名称:tf-net,代码行数:24,代码来源:CoordinateTransformation.cs


示例17: CoordinatesTransformer

        internal CoordinatesTransformer(ICoordinateSystem source, ICoordinateSystem target)
        {
            Debug.Assert(source!=null);
            if (source==null)
                throw new ArgumentNullException("source");
            Debug.Assert(target!=null);
            if (target==null)
                throw new ArgumentNullException("target");

            _Source=CoordinateSystemUtils.Convert(source);
            _Target=CoordinateSystemUtils.Convert(target);
        }
开发者ID:mcartoixa,项目名称:GeoSIK,代码行数:12,代码来源:CoordinatesTransformer.cs


示例18: FdoGeometry

        /// <summary>Creates a new instance of the <see cref="FdoGeometry" /> class that encapsulates
        /// a copy of the specified FDO geometry, in the specified coordinate system.</summary>
        /// <param name="geometry">The FDO geometry for which a copy will be encapsulated.</param>
        /// <param name="coordinateSystem">The coordinate system of the encapsulated FDO geometry.</param>
        /// <remarks>
        ///   <para>This instance encapsulates a copy of the specified <paramref name="geometry" />. It is thus
        /// the responsibility of the caller to <see cref="IDisposable.Dispose()" /> the specified <paramref name="geometry" />.</para>
        /// </remarks>
        public FdoGeometry(FGeometry.IGeometry geometry, ICoordinateSystem coordinateSystem)
        {
            Debug.Assert(geometry!=null);
            if (geometry==null)
                throw new ArgumentNullException("geometry");
            Debug.Assert(coordinateSystem!=null);
            if (coordinateSystem==null)
                throw new ArgumentNullException("coordinateSystem");

            _Geometry=FdoGeometryBuilder.Factory.CreateGeometry(geometry);
            _CoordinateSystem=coordinateSystem;
        }
开发者ID:mcartoixa,项目名称:GeoSIK,代码行数:20,代码来源:FdoGeometry.cs


示例19: FdoEnvelope

        /// <summary>Creates a new instance of the <see cref="FdoGeometry" /> class that encapsulates
        /// a copy of the specified FDO envelope, in the specified coordinate system.</summary>
        /// <param name="envelope">The FDO envelope for which a copy will be encapsulated.</param>
        /// <param name="coordinateSystem">The coordinate system of the encapsulated FDO geometry.</param>
        /// <remarks>
        ///   <para>This instance encapsulates a copy of the specified <paramref name="envelope" />. It is thus
        /// the responsibility of the caller to <see cref="IDisposable.Dispose()" /> the specified <paramref name="envelope" />.</para>
        /// </remarks>
        public FdoEnvelope(FGeometry.IEnvelope envelope, ICoordinateSystem coordinateSystem)
        {
            Debug.Assert(envelope!=null);
            if (envelope==null)
                throw new ArgumentNullException("envelope");
            Debug.Assert(coordinateSystem!=null);
            if (coordinateSystem==null)
                throw new ArgumentNullException("coordinateSystem");

            _Envelope=FdoGeometryBuilder.Factory.CreateEnvelope(envelope);
            _CoordinateSystem=coordinateSystem;
        }
开发者ID:mcartoixa,项目名称:GeoSIK,代码行数:20,代码来源:FdoEnvelope.cs


示例20: GeometryFactory

 public GeometryFactory(ICoordinateFactory coordFactory, ICoordinateSequenceFactory sequenceFactory, Int32? srid, ICoordinateSystem spatialReference)
 {
     _coordFactory = coordFactory;
     _sequenceFactory = sequenceFactory;
     _srid = srid;
     _spatialReference = spatialReference;
     _spatialOps = new BoundingBoxSpatialOperations(this);
     _wktEncoder = new WktWriter();
     _wktDecoder = new WktReader(this, null);
     _wkbEncoder = new WkbWriter();
     _wkbDecoder = new WkbReader(this);
 }
开发者ID:pobingwanghai,项目名称:SharpMapV2,代码行数:12,代码来源:GeometryFactory.cs



注:本文中的ICoordinateSystem类示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C# ICoordinates类代码示例发布时间:2022-05-24
下一篇:
C# ICoordinateSequence类代码示例发布时间:2022-05-24
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap