VB.NET SqlBulkCopy构造函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› VB.NET›VB.NET教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了VB.NET中System.Data.SqlClient.SqlBulkCopy.SqlBulkCopy构造函数的典型用法代码示例。如果您正苦于以下问题：VB.NET SqlBulkCopy构造函数的具体用法？VB.NET SqlBulkCopy怎么用？VB.NET SqlBulkCopy使用的例子？那么恭喜您, 这里精选的构造函数代码示例或许可以为您提供帮助。您也可以进一步了解该构造函数所在类System.Data.SqlClient.SqlBulkCopy的用法示例。

在下文中一共展示了SqlBulkCopy构造函数的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的VB.NET代码示例。

示例1: Module1

' 导入命名空间
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Open the destination connection. In the real world you would 
            ' not use SqlBulkCopy to move data from one table to the other   
            ' in the same database. This is for demonstration purposes only.
            Using destinationConnection As SqlConnection = _
                New SqlConnection(connectionString)
                destinationConnection.Open()

                ' Set up the bulk copy object. 
                ' The column positions in the source data reader 
                ' match the column positions in the destination table, 
                ' so there is no need to map columns.
                Using bulkCopy As SqlBulkCopy = _
                  New SqlBulkCopy(destinationConnection)
                    bulkCopy.DestinationTableName = _
                    "dbo.BulkCopyDemoMatchingColumns"

                    Try
                        ' Write from the source to the destination.
                        bulkCopy.WriteToServer(reader)

                    Catch ex As Exception
                        Console.WriteLine(ex.Message)

                    Finally
                        ' Close the SqlDataReader. The SqlBulkCopy
                        ' object is automatically closed at the end
                        ' of the Using block.
                        reader.Close()
                    End Try
                End Using

                ' Perform a final count on the destination table
                ' to see how many rows were added.
                Dim countEnd As Long = _
                    System.Convert.ToInt32(commandRowCount.ExecuteScalar())
                Console.WriteLine("Ending row count = {0}", countEnd)
                Console.WriteLine("{0} rows were added.", countEnd - countStart)

                Console.WriteLine("Press Enter to finish.")
                Console.ReadLine()
            End Using
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

开发者ID:VB.NET开发者，项目名称:System.Data.SqlClient，代码行数:78，代码来源:SqlBulkCopy

示例2: Module1

' 导入命名空间
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Set up the bulk copy object using a connection string. 
            ' In the real world you would not use SqlBulkCopy to move
            ' data from one table to the other in the same database.
            Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
                bulkCopy.DestinationTableName = _
                "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write from the source to the destination.
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                Finally
                    ' Close the SqlDataReader. The SqlBulkCopy
                    ' object is automatically closed at the end
                    ' of the Using block.
                    reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

开发者ID:VB.NET开发者，项目名称:System.Data.SqlClient，代码行数:68，代码来源:SqlBulkCopy

示例3: Module1

' 导入命名空间
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Create the SqlBulkCopy object using a connection string 
            ' and the KeepIdentity option. 
            ' In the real world you would not use SqlBulkCopy to move
            ' data from one table to the other in the same database.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connectionString, SqlBulkCopyOptions.KeepIdentity)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write from the source to the destination.
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                    Finally
                        ' Close the SqlDataReader. The SqlBulkCopy
                        ' object is automatically closed at the end
                        ' of the Using block.
                        reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

开发者ID:VB.NET开发者，项目名称:System.Data.SqlClient，代码行数:69，代码来源:SqlBulkCopy

注：本文中的System.Data.SqlClient.SqlBulkCopy.SqlBulkCopy构造函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。