• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Python fs.fs_encode函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Python中pyload.utils.fs.fs_encode函数的典型用法代码示例。如果您正苦于以下问题:Python fs_encode函数的具体用法?Python fs_encode怎么用?Python fs_encode使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了fs_encode函数的10个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: _copyChunks

    def _copyChunks(self):
        init = fs_encode(self.info.getChunkName(0)) #initial chunk name

        if self.info.getCount() > 1:
            fo = open(init, "rb+") #first chunkfile
            for i in range(1, self.info.getCount()):
                #input file
                fo.seek(
                    self.info.getChunkRange(i - 1)[1] + 1) #seek to beginning of chunk, to get rid of overlapping chunks
                fname = fs_encode("%s.chunk%d" % (self.path, i))
                fi = open(fname, "rb")
                buf = 32 * 1024
                while True: #copy in chunks, consumes less memory
                    data = fi.read(buf)
                    if not data:
                        break
                    fo.write(data)
                fi.close()
                if fo.tell() < self.info.getChunkRange(i)[1]:
                    fo.close()
                    remove(init)
                    self.info.remove() #there are probably invalid chunks
                    raise Exception("Downloaded content was smaller than expected. Try to reduce download connections.")
                remove(fname) #remove chunk
            fo.close()

        if self.name:
            self.path = save_join(dirname(self.path), self.name)

        move(init, fs_encode(self.path))
        self.info.remove() #remove info file
开发者ID:ASCIIteapot,项目名称:pyload,代码行数:31,代码来源:CurlDownload.py


示例2: load

    def load(name):
        fs_name = fs_encode("%s.chunks" % name)
        if not exists(fs_name):
            raise IOError()
        fh = codecs.open(fs_name, "r", "utf_8")
        name = fh.readline()[:-1]
        size = fh.readline()[:-1]
        if name.startswith("name:") and size.startswith("size:"):
            name = name[5:]
            size = size[5:]
        else:
            fh.close()
            raise WrongFormat()
        ci = ChunkInfo(name)
        ci.loaded = True
        ci.setSize(size)
        while True:
            if not fh.readline(): #skip line
                break
            name = fh.readline()[1:-1]
            range = fh.readline()[1:-1]
            if name.startswith("name:") and range.startswith("range:"):
                name = name[5:]
                range = range[6:].split("-")
            else:
                raise WrongFormat()

            ci.addChunk(name, (long(range[0]), long(range[1])))
        fh.close()
        return ci
开发者ID:Dmanugm,项目名称:pyload,代码行数:30,代码来源:CurlChunk.py


示例3: save

 def save(self):
     fs_name = fs_encode("%s.chunks" % self.name)
     fh = codecs.open(fs_name, "w", "utf_8")
     fh.write("name:%s\n" % self.name)
     fh.write("size:%s\n" % self.size)
     for i, c in enumerate(self.chunks):
         fh.write("#%d:\n" % i)
         fh.write("\tname:%s\n" % c[0])
         fh.write("\trange:%i-%i\n" % c[1])
     fh.close()
开发者ID:Dmanugm,项目名称:pyload,代码行数:10,代码来源:CurlChunk.py


示例4: getHandle

    def getHandle(self):
        """ returns a Curl handle ready to use for perform/multiperform """

        self.setRequestContext(self.p.url, self.p.get, self.p.post, self.p.referer, self.p.cookies)
        self.c.setopt(pycurl.WRITEFUNCTION, self.writeBody)
        self.c.setopt(pycurl.HEADERFUNCTION, self.writeHeader)

        # request all bytes, since some servers in russia seems to have a defect arihmetic unit

        fs_name = fs_encode(self.p.info.getChunkName(self.id))
        if self.resume:
            self.fp = open(fs_name, "ab")
            self.arrived = self.fp.tell()
            if not self.arrived:
                self.arrived = stat(fs_name).st_size

            if self.range:
                # do nothing if chunk already finished
                if self.arrived + self.range[0] >= self.range[1]:
                    return None

                if self.id == len(self.p.info.chunks) - 1:  # as last chunk dont set end range, so we get everything
                    range = "%i-" % (self.arrived + self.range[0])
                else:
                    range = "%i-%i" % (self.arrived + self.range[0], min(self.range[1] + 1, self.p.size - 1))

                self.log.debug("Chunked resume with range %s" % range)
                self.c.setopt(pycurl.RANGE, range)
            else:
                self.log.debug("Resume File from %i" % self.arrived)
                self.c.setopt(pycurl.RESUME_FROM, self.arrived)

        else:
            if self.range:
                if self.id == len(self.p.info.chunks) - 1:  # see above
                    range = "%i-" % self.range[0]
                else:
                    range = "%i-%i" % (self.range[0], min(self.range[1] + 1, self.p.size - 1))

                self.log.debug("Chunked with range %s" % range)
                self.c.setopt(pycurl.RANGE, range)

            self.fp = open(fs_name, "wb")

        return self.c
开发者ID:Robbi373,项目名称:pyload,代码行数:45,代码来源:CurlChunk.py


示例5: checkDownload

    def checkDownload(self, rules, api_size=0, max_size=50000, delete=True, read_size=0):
        """ checks the content of the last downloaded file, re match is saved to `lastCheck`
        
        :param rules: dict with names and rules to match (compiled regexp or strings)
        :param api_size: expected file size
        :param max_size: if the file is larger then it wont be checked
        :param delete: delete if matched
        :param read_size: amount of bytes to read from files larger then max_size
        :return: dictionary key of the first rule that matched
        """
        lastDownload = fs_encode(self.lastDownload)
        if not exists(lastDownload):
            return None

        size = stat(lastDownload)
        size = size.st_size

        if api_size and api_size <= size:
            return None
        elif size > max_size and not read_size:
            return None
        self.log.debug("Download Check triggered")
        f = open(lastDownload, "rb")
        content = f.read(read_size if read_size else -1)
        f.close()
        # produces encoding errors, better log to other file in the future?
        # self.log.debug("Content: %s" % content)
        for name, rule in rules.iteritems():
            if type(rule) in (str, unicode):
                if rule in content:
                    if delete:
                        remove(lastDownload)
                    return name
            elif hasattr(rule, "search"):
                m = rule.search(content)
                if m:
                    if delete:
                        remove(lastDownload)
                    self.lastCheck = m
                    return name
开发者ID:vta1201,项目名称:pyload,代码行数:40,代码来源:Hoster.py


示例6: process

    def process(self, pyfile):
        if not self.account:
            self.logError(_("Please enter your %s account or deactivate this plugin") % "premium.to")
            self.fail("No premium.to account provided")

        self.logDebug("premium.to: Old URL: %s" % pyfile.url)

        tra = self.getTraffic()

        #raise timeout to 2min
        self.req.setOption("timeout", 120)

        self.download(
            "http://premium.to/api/getfile.php?authcode=%s&link=%s" % (self.account.authcode, quote(pyfile.url, "")),
            disposition=True)

        check = self.checkDownload({"nopremium": "No premium account available"})

        if check == "nopremium":
            self.retry(60, 5 * 60, "No premium account available")

        err = ''
        if self.req.http.code == '420':
            # Custom error code send - fail
            lastDownload = fs_encode(self.lastDownload)

            if exists(lastDownload):
                f = open(lastDownload, "rb")
                err = f.read(256).strip()
                f.close()
                remove(lastDownload)
            else:
                err = 'File does not exist'

        trb = self.getTraffic()
        self.logInfo("Filesize: %d, Traffic used %d, traffic left %d" % (pyfile.size, tra - trb, trb))

        if err:
            self.fail(err)
开发者ID:ASCIIteapot,项目名称:pyload,代码行数:39,代码来源:Premium4Me.py


示例7: getLocalContent

    def getLocalContent(self, urls):
        """Load files from disk and separate to file content and url list

        :param urls:
        :return: list of (filename, content), remote urls
        """
        content = []
        # do nothing if no decryptFile method
        if hasattr(self.__class__, "decryptFile"):
            remote = []
            for url in urls:
                path = None
                if url.startswith("http"): # skip urls directly
                    pass
                elif url.startswith(self.CONTENT_PREFIX):
                    path = url
                elif exists(url):
                    path = url
                elif exists(self.core.path(url)):
                    path = self.core.path(url)

                if path:
                    try:
                        if path.startswith(self.CONTENT_PREFIX):
                            content.append(("", path[len(self.CONTENT_PREFIX)]))
                        else:
                            f = open(fs_encode(path), "rb")
                            content.append((f.name, f.read()))
                            f.close()
                    except IOError, e:
                        self.logError("IOError", e)
                else:
                    remote.append(url)

            #swap filtered url list
            urls = remote
开发者ID:Rusk85,项目名称:pyload,代码行数:36,代码来源:Crypter.py


示例8: remove

 def remove(self):
     fs_name = fs_encode("%s.chunks" % self.name)
     if exists(fs_name): remove(fs_name)
开发者ID:Dmanugm,项目名称:pyload,代码行数:3,代码来源:CurlChunk.py


示例9: _download


#.........这里部分代码省略.........
            if not chunksCreated and self.chunkSupport and self.size: #will be set later by first chunk

                self.flags ^= Connection.Resumable
                if not resume:
                    self.info.setSize(self.size)
                    self.info.createChunks(chunks)
                    self.info.save()

                chunks = self.info.getCount()

                init.setRange(self.info.getChunkRange(0))

                for i in range(1, chunks):
                    c = CurlChunk(i, self, self.info.getChunkRange(i), resume)

                    handle = c.getHandle()
                    if handle:
                        self.chunks.append(c)
                        self.m.add_handle(handle)
                    else:
                        #close immediately
                        self.log.debug("Invalid curl handle -> closed")
                        c.close()

                chunksCreated = True

            while 1:
                ret, num_handles = self.m.perform()
                if ret != pycurl.E_CALL_MULTI_PERFORM:
                    break

            t = time()

            # reduce these calls
            # when num_q is 0, the loop is exited
            while lastFinishCheck + 0.5 < t:
                # list of failed curl handles
                failed = []
                ex = None # save only last exception, we can only raise one anyway

                num_q, ok_list, err_list = self.m.info_read()
                for c in ok_list:
                    chunk = self.findChunk(c)
                    try: # check if the header implies success, else add it to failed list
                        chunk.verifyHeader()
                    except ResponseException, e:
                        self.log.debug("Chunk %d failed: %s" % (chunk.id + 1, str(e)))
                        failed.append(chunk)
                        ex = e
                    else:
                        chunksDone.add(c)

                for c in err_list:
                    curl, errno, msg = c
                    chunk = self.findChunk(curl)
                    #test if chunk was finished
                    if errno != 23 or "0 !=" not in msg:
                        failed.append(chunk)
                        ex = pycurl.error(errno, msg)
                        self.log.debug("Chunk %d failed: %s" % (chunk.id + 1, str(ex)))
                        continue

                    try: # check if the header implies success, else add it to failed list
                        chunk.verifyHeader()
                    except ResponseException, e:
                        self.log.debug("Chunk %d failed: %s" % (chunk.id + 1, str(e)))
                        failed.append(chunk)
                        ex = e
                    else:
                        chunksDone.add(curl)
                if not num_q: # no more info to get

                    # check if init is not finished so we reset download connections
                    # note that other chunks are closed and everything downloaded with initial connection
                    if failed and init not in failed and init.c not in chunksDone:
                        self.log.error(_("Download chunks failed, fallback to single connection | %s" % (str(ex))))

                        #list of chunks to clean and remove
                        to_clean = filter(lambda x: x is not init, self.chunks)
                        for chunk in to_clean:
                            self.closeChunk(chunk)
                            self.chunks.remove(chunk)
                            remove(fs_encode(self.info.getChunkName(chunk.id)))

                        #let first chunk load the rest and update the info file
                        init.resetRange()
                        self.info.clear()
                        self.info.addChunk("%s.chunk0" % self.path, (0, self.size))
                        self.info.save()
                    elif failed:
                        raise ex

                    lastFinishCheck = t

                    if len(chunksDone) >= len(self.chunks):
                        if len(chunksDone) > len(self.chunks):
                            self.log.warning("Finished download chunks size incorrect, please report bug.")
                        done = True  #all chunks loaded

                    break
开发者ID:ASCIIteapot,项目名称:pyload,代码行数:101,代码来源:CurlDownload.py


示例10: extract

    def extract(self, ids, thread=None):
        # reload from txt file
        self.reloadPasswords()

        # dl folder
        dl = self.config['general']['download_folder']

        extracted = []

        #iterate packages -> plugins -> targets
        for pid in ids:
            p = self.core.files.getPackage(pid)
            self.logInfo(_("Check package %s") % p.name)
            if not p:
                continue

            # determine output folder
            out = save_join(dl, p.folder, "")
            # force trailing slash

            if self.getConfig("destination") and self.getConfig("destination").lower() != "none":

                out = save_join(dl, p.folder, self.getConfig("destination"), "")
                #relative to package folder if destination is relative, otherwise absolute path overwrites them

                if self.getConfig("subfolder"):
                    out = join(out, fs_encode(p.folder))

                if not exists(out):
                    makedirs(out)

            files_ids = [(save_join(dl, p.folder, f.name), f.fid) for f in p.getFiles().itervalues()]
            matched = False

            # check as long there are unseen files
            while files_ids:
                new_files_ids = []

                for plugin in self.plugins:
                    targets = plugin.getTargets(files_ids)
                    if targets:
                        self.logDebug("Targets for %s: %s" % (plugin.__name__, targets))
                        matched = True
                    for target, fid in targets:
                        if target in extracted:
                            self.logDebug(basename(target), "skipped")
                            continue
                        extracted.append(target)  # prevent extracting same file twice

                        klass = plugin(self, target, out, self.getConfig("fullpath"), self.getConfig("overwrite"), self.getConfig("excludefiles"),
                                       self.getConfig("renice"))
                        klass.init()

                        self.logInfo(basename(target), _("Extract to %s") % out)
                        new_files = self.startExtracting(klass, fid, p.password.strip().splitlines(), thread)
                        self.logDebug("Extracted: %s" % new_files)
                        self.setPermissions(new_files)

                        for file in new_files:
                            if not exists(file):
                                self.logDebug("new file %s does not exists" % file)
                                continue
                            if self.getConfig("recursive") and isfile(file):
                                new_files_ids.append((file, fid))  # append as new target

                files_ids = new_files_ids  # also check extracted files

            if not matched:
                self.logInfo(_("No files found to extract"))
开发者ID:ASCIIteapot,项目名称:pyload,代码行数:69,代码来源:ExtractArchive.py



注:本文中的pyload.utils.fs.fs_encode函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Python fs.join函数代码示例发布时间:2022-05-25
下一篇:
Python fs.exists函数代码示例发布时间:2022-05-25
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap