Python pybullet.setGravity函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中pybullet.setGravity函数的典型用法代码示例。如果您正苦于以下问题：Python setGravity函数的具体用法？Python setGravity怎么用？Python setGravity使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了setGravity函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: setupWorld

def setupWorld():
	p.resetSimulation()
	p.loadURDF("planeMesh.urdf")
	kukaId = p.loadURDF("kuka_iiwa/model_free_base.urdf",[0,0,10])
	for i in range (p.getNumJoints(kukaId)):
		p.setJointMotorControl2(kukaId,i,p.POSITION_CONTROL,force=0)
	for i in range (numObjects):
		cube = p.loadURDF("cube_small.urdf",[0,i*0.02,(i+1)*0.2])
		#p.changeDynamics(cube,-1,mass=100)
	p.stepSimulation()
	p.setGravity(0,0,-10)

开发者ID:AndrewMeadows，项目名称:bullet3，代码行数:11，代码来源:saveRestoreState.py

示例2: testJacobian

  def testJacobian(self):
    import pybullet as p

    clid = p.connect(p.SHARED_MEMORY)
    if (clid < 0):
      p.connect(p.DIRECT)

    time_step = 0.001
    gravity_constant = -9.81

    urdfs = [
        "TwoJointRobot_w_fixedJoints.urdf", "TwoJointRobot_w_fixedJoints.urdf",
        "kuka_iiwa/model.urdf", "kuka_lwr/kuka.urdf"
    ]
    for urdf in urdfs:
      p.resetSimulation()
      p.setTimeStep(time_step)
      p.setGravity(0.0, 0.0, gravity_constant)

      robotId = p.loadURDF(urdf, useFixedBase=True)
      p.resetBasePositionAndOrientation(robotId, [0, 0, 0], [0, 0, 0, 1])
      numJoints = p.getNumJoints(robotId)
      endEffectorIndex = numJoints - 1

      # Set a joint target for the position control and step the sim.
      self.setJointPosition(robotId, [0.1 * (i % 3) for i in range(numJoints)])
      p.stepSimulation()

      # Get the joint and link state directly from Bullet.
      mpos, mvel, mtorq = self.getMotorJointStates(robotId)

      result = p.getLinkState(robotId,
                              endEffectorIndex,
                              computeLinkVelocity=1,
                              computeForwardKinematics=1)
      link_trn, link_rot, com_trn, com_rot, frame_pos, frame_rot, link_vt, link_vr = result
      # Get the Jacobians for the CoM of the end-effector link.
      # Note that in this example com_rot = identity, and we would need to use com_rot.T * com_trn.
      # The localPosition is always defined in terms of the link frame coordinates.

      zero_vec = [0.0] * len(mpos)
      jac_t, jac_r = p.calculateJacobian(robotId, endEffectorIndex, com_trn, mpos, zero_vec,
                                         zero_vec)

      assert (allclose(dot(jac_t, mvel), link_vt))
      assert (allclose(dot(jac_r, mvel), link_vr))
    p.disconnect()

开发者ID:bulletphysics，项目名称:bullet3，代码行数:47，代码来源:unittests.py

示例3: evaluate_params

def evaluate_params(evaluateFunc,
                    params,
                    objectiveParams,
                    urdfRoot='',
                    timeStep=0.01,
                    maxNumSteps=10000,
                    sleepTime=0):
  print('start evaluation')
  beforeTime = time.time()
  p.resetSimulation()

  p.setTimeStep(timeStep)
  p.loadURDF("%s/plane.urdf" % urdfRoot)
  p.setGravity(0, 0, -10)

  global minitaur
  minitaur = Minitaur(urdfRoot)
  start_position = current_position()
  last_position = None  # for tracing line
  total_energy = 0

  for i in range(maxNumSteps):
    torques = minitaur.getMotorTorques()
    velocities = minitaur.getMotorVelocities()
    total_energy += np.dot(np.fabs(torques), np.fabs(velocities)) * timeStep

    joint_values = evaluate_func_map[evaluateFunc](i, params)
    minitaur.applyAction(joint_values)
    p.stepSimulation()
    if (is_fallen()):
      break

    if i % 100 == 0:
      sys.stdout.write('.')
      sys.stdout.flush()
    time.sleep(sleepTime)

  print(' ')

  alpha = objectiveParams[0]
  final_distance = np.linalg.norm(start_position - current_position())
  finalReturn = final_distance - alpha * total_energy
  elapsedTime = time.time() - beforeTime
  print("trial for ", params, " final_distance", final_distance, "total_energy", total_energy,
        "finalReturn", finalReturn, "elapsed_time", elapsedTime)
  return finalReturn

开发者ID:bulletphysics，项目名称:bullet3，代码行数:46，代码来源:minitaur_evaluate.py

示例4: setupWorld

  def setupWorld(self):
    numObjects = 50

    maximalCoordinates = False

    p.resetSimulation()
    p.setPhysicsEngineParameter(deterministicOverlappingPairs=1)
    p.loadURDF("planeMesh.urdf", useMaximalCoordinates=maximalCoordinates)
    kukaId = p.loadURDF("kuka_iiwa/model_free_base.urdf", [0, 0, 10],
                        useMaximalCoordinates=maximalCoordinates)
    for i in range(p.getNumJoints(kukaId)):
      p.setJointMotorControl2(kukaId, i, p.POSITION_CONTROL, force=0)
    for i in range(numObjects):
      cube = p.loadURDF("cube_small.urdf", [0, i * 0.02, (i + 1) * 0.2])
      #p.changeDynamics(cube,-1,mass=100)
    p.stepSimulation()
    p.setGravity(0, 0, -10)

开发者ID:bulletphysics，项目名称:bullet3，代码行数:17，代码来源:saveRestoreStateTest.py

示例5: _reset

  def _reset(self):
#    print("-----------reset simulation---------------")
    p.resetSimulation()
    self.cartpole = p.loadURDF(os.path.join(pybullet_data.getDataPath(),"cartpole.urdf"),[0,0,0])
    self.timeStep = 0.01
    p.setJointMotorControl2(self.cartpole, 1, p.VELOCITY_CONTROL, force=0)
    p.setGravity(0,0, -10)
    p.setTimeStep(self.timeStep)
    p.setRealTimeSimulation(0)

    initialCartPos = self.np_random.uniform(low=-0.5, high=0.5, size=(1,))
    initialAngle = self.np_random.uniform(low=-0.5, high=0.5, size=(1,))
    p.resetJointState(self.cartpole, 1, initialAngle)
    p.resetJointState(self.cartpole, 0, initialCartPos)

    self.state = p.getJointState(self.cartpole, 1)[0:2] + p.getJointState(self.cartpole, 0)[0:2]

    return np.array(self.state)

开发者ID:Valentactive，项目名称:bullet3，代码行数:18，代码来源:cartpole_bullet.py

示例6: _reset

 def _reset(self):
   p.resetSimulation()
   #p.setPhysicsEngineParameter(numSolverIterations=300)
   p.setTimeStep(self._timeStep)
   p.loadURDF(os.path.join(self._urdfRoot,"plane.urdf"))
   
   dist = 5 +2.*random.random()
   ang = 2.*3.1415925438*random.random()
   
   ballx = dist * math.sin(ang)
   bally = dist * math.cos(ang)
   ballz = 1
       
   p.setGravity(0,0,-10)
   self._humanoid = simpleHumanoid.SimpleHumanoid(urdfRootPath=self._urdfRoot, timeStep=self._timeStep)
   self._envStepCounter = 0
   p.stepSimulation()
   self._observation = self.getExtendedObservation()
   return np.array(self._observation)

开发者ID:Valentactive，项目名称:bullet3，代码行数:19，代码来源:simpleHumanoidGymEnv.py

示例7: test_rolling_friction

 def test_rolling_friction(self):
   import pybullet as p
   p.connect(p.DIRECT)
   p.loadURDF("plane.urdf")
   sphere = p.loadURDF("sphere2.urdf", [0, 0, 1])
   p.resetBaseVelocity(sphere, linearVelocity=[1, 0, 0])
   p.changeDynamics(sphere, -1, linearDamping=0, angularDamping=0)
   #p.changeDynamics(sphere,-1,rollingFriction=0)
   p.setGravity(0, 0, -10)
   for i in range(1000):
     p.stepSimulation()
   vel = p.getBaseVelocity(sphere)
   self.assertLess(vel[0][0], 1e-10)
   self.assertLess(vel[0][1], 1e-10)
   self.assertLess(vel[0][2], 1e-10)
   self.assertLess(vel[1][0], 1e-10)
   self.assertLess(vel[1][1], 1e-10)
   self.assertLess(vel[1][2], 1e-10)
   p.disconnect()

开发者ID:bulletphysics，项目名称:bullet3，代码行数:19，代码来源:unittests.py

示例8: enter

    def __enter__(self):
        print("connecting")
        optionstring='--width={} --height={}'.format(pixelWidth,pixelHeight)
        optionstring += ' --window_backend=2 --render_device=0'

        print(self.connection_mode, optionstring,*self.argv)
        cid = pybullet.connect(self.connection_mode, options=optionstring,*self.argv)
        if cid < 0:
            raise ValueError
        print("connected")
        pybullet.configureDebugVisualizer(pybullet.COV_ENABLE_GUI,0)
        pybullet.configureDebugVisualizer(pybullet.COV_ENABLE_SEGMENTATION_MARK_PREVIEW,0)
        pybullet.configureDebugVisualizer(pybullet.COV_ENABLE_DEPTH_BUFFER_PREVIEW,0)
        pybullet.configureDebugVisualizer(pybullet.COV_ENABLE_RGB_BUFFER_PREVIEW,0)

        pybullet.resetSimulation()
        pybullet.loadURDF("plane.urdf",[0,0,-1])
        pybullet.loadURDF("r2d2.urdf")
        pybullet.loadURDF("duck_vhacd.urdf")
        pybullet.setGravity(0,0,-10)

开发者ID:jiapei100，项目名称:bullet3，代码行数:20，代码来源:rendertest.py

示例9: _reset

 def _reset(self):
   self.terminated = 0
   p.resetSimulation()
   p.setPhysicsEngineParameter(numSolverIterations=150)
   p.setTimeStep(self._timeStep)
   p.loadURDF(os.path.join(self._urdfRoot,"plane.urdf"),[0,0,-1])
   
   p.loadURDF(os.path.join(self._urdfRoot,"table/table.urdf"), 0.5000000,0.00000,-.820000,0.000000,0.000000,0.0,1.0)
   
   xpos = 0.5 +0.2*random.random()
   ypos = 0 +0.25*random.random()
   ang = 3.1415925438*random.random()
   orn = p.getQuaternionFromEuler([0,0,ang])
   self.blockUid =p.loadURDF(os.path.join(self._urdfRoot,"block.urdf"), xpos,ypos,-0.1,orn[0],orn[1],orn[2],orn[3])
           
   p.setGravity(0,0,-10)
   self._kuka = kuka.Kuka(urdfRootPath=self._urdfRoot, timeStep=self._timeStep)
   self._envStepCounter = 0
   p.stepSimulation()
   self._observation = self.getExtendedObservation()
   return np.array(self._observation)

开发者ID:Valentactive，项目名称:bullet3，代码行数:21，代码来源:kukaCamGymEnv.py

示例10: _reset

  def _reset(self):
#    print("-----------reset simulation---------------")
    p.resetSimulation()
    self.cartpole = p.loadURDF(os.path.join(pybullet_data.getDataPath(),"cartpole.urdf"),[0,0,0])
    p.changeDynamics(self.cartpole, -1, linearDamping=0, angularDamping=0)
    p.changeDynamics(self.cartpole, 0, linearDamping=0, angularDamping=0)
    p.changeDynamics(self.cartpole, 1, linearDamping=0, angularDamping=0)
    self.timeStep = 0.02
    p.setJointMotorControl2(self.cartpole, 1, p.VELOCITY_CONTROL, force=0)
    p.setJointMotorControl2(self.cartpole, 0, p.VELOCITY_CONTROL, force=0)
    p.setGravity(0,0, -9.8)
    p.setTimeStep(self.timeStep)
    p.setRealTimeSimulation(0)

    randstate = self.np_random.uniform(low=-0.05, high=0.05, size=(4,))
    p.resetJointState(self.cartpole, 1, randstate[0], randstate[1])
    p.resetJointState(self.cartpole, 0, randstate[2], randstate[3])
    #print("randstate=",randstate)
    self.state = p.getJointState(self.cartpole, 1)[0:2] + p.getJointState(self.cartpole, 0)[0:2]
    #print("self.state=", self.state)
    return np.array(self.state)

开发者ID:simo-11，项目名称:bullet3，代码行数:21，代码来源:cartpole_bullet.py

示例11: _reset

  def _reset(self):
    """Environment reset called at the beginning of an episode.
    """
    # Set the camera settings.
    look = [0.23, 0.2, 0.54]
    distance = 1.
    pitch = -56 + self._cameraRandom*np.random.uniform(-3, 3)
    yaw = 245 + self._cameraRandom*np.random.uniform(-3, 3)
    roll = 0
    self._view_matrix = p.computeViewMatrixFromYawPitchRoll(
        look, distance, yaw, pitch, roll, 2)
    fov = 20. + self._cameraRandom*np.random.uniform(-2, 2)
    aspect = self._width / self._height
    near = 0.01
    far = 10
    self._proj_matrix = p.computeProjectionMatrixFOV(
        fov, aspect, near, far)
    
    self._attempted_grasp = False
    self._env_step = 0
    self.terminated = 0

    p.resetSimulation()
    p.setPhysicsEngineParameter(numSolverIterations=150)
    p.setTimeStep(self._timeStep)
    p.loadURDF(os.path.join(self._urdfRoot,"plane.urdf"),[0,0,-1])
    
    p.loadURDF(os.path.join(self._urdfRoot,"table/table.urdf"), 0.5000000,0.00000,-.820000,0.000000,0.000000,0.0,1.0)
            
    p.setGravity(0,0,-10)
    self._kuka = kuka.Kuka(urdfRootPath=self._urdfRoot, timeStep=self._timeStep)
    self._envStepCounter = 0
    p.stepSimulation()

    # Choose the objects in the bin.
    urdfList = self._get_random_object(
      self._numObjects, self._isTest)
    self._objectUids = self._randomly_place_objects(urdfList)
    self._observation = self._get_observation()
    return np.array(self._observation)

开发者ID:AndrewMeadows，项目名称:bullet3，代码行数:40，代码来源:kuka_diverse_object_gym_env.py

示例12: main

def main(unused_args):
  timeStep = 0.01
  c = p.connect(p.SHARED_MEMORY)
  if (c<0):
      c = p.connect(p.GUI)
  p.resetSimulation()
  p.setTimeStep(timeStep)
  p.loadURDF("plane.urdf")
  p.setGravity(0,0,-10)

  minitaur = Minitaur()
  amplitude = 0.24795664427
  speed = 0.2860877729434
  for i in range(1000):
    a1 = math.sin(i*speed)*amplitude+1.57
    a2 = math.sin(i*speed+3.14)*amplitude+1.57
    joint_values = [a1, -1.57, a1, -1.57, a2, -1.57, a2, -1.57]
    minitaur.applyAction(joint_values)

    p.stepSimulation()
#    print(minitaur.getBasePosition())
    time.sleep(timeStep)
  final_distance = np.linalg.norm(np.asarray(minitaur.getBasePosition()))
  print(final_distance)

开发者ID:MixerMovies，项目名称:RedShadow，代码行数:24，代码来源:minitaur_test.py

示例13: print

import pybullet as p
import time
import pkgutil
egl = pkgutil.get_loader('eglRenderer')

p.connect(p.DIRECT)

plugin = p.loadPlugin(egl.get_filename(), "_eglRendererPlugin")
print("plugin=",plugin)

p.configureDebugVisualizer(p.COV_ENABLE_RENDERING, 0)
p.configureDebugVisualizer(p.COV_ENABLE_GUI, 0)

p.setGravity(0,0,-10)
p.loadURDF("plane.urdf",[0,0,-1])
p.loadURDF("r2d2.urdf")

pixelWidth = 320
pixelHeight = 220
camTargetPos = [0,0,0]
camDistance = 4
pitch = -10.0
roll=0
upAxisIndex = 2


while (p.isConnected()):
    for yaw in range (0,360,10) :
        start = time.time()
        p.stepSimulation()

开发者ID:jiapei100，项目名称:bullet3，代码行数:30，代码来源:eglRenderTest.py

示例14: range

    -2.238254, 1.530335, 0.000000, -2.238298, 0.000000, -1.528038, 0.000000, 2.242656, -1.525193,
    0.000000, 2.244008, -1.530011, 0.000000, 2.240683, -1.528687, 0.000000, 2.240517
]
for ji in range(p.getNumJoints(ob)):
  p.resetJointState(ob, ji, jointPositions[ji])
  p.setJointMotorControl2(bodyIndex=ob, jointIndex=ji, controlMode=p.VELOCITY_CONTROL, force=0)

cid0 = p.createConstraint(1, 3, 1, 6, p.JOINT_POINT2POINT, [0.000000, 0.000000, 0.000000],
                          [0.000000, 0.005000, 0.200000], [0.000000, 0.010000, 0.200000],
                          [0.000000, 0.000000, 0.000000, 1.000000],
                          [0.000000, 0.000000, 0.000000, 1.000000])
p.changeConstraint(cid0, maxForce=500.000000)
cid1 = p.createConstraint(1, 16, 1, 19, p.JOINT_POINT2POINT, [0.000000, 0.000000, 0.000000],
                          [0.000000, 0.005000, 0.200000], [0.000000, 0.010000, 0.200000],
                          [0.000000, 0.000000, 0.000000, 1.000000],
                          [0.000000, 0.000000, 0.000000, 1.000000])
p.changeConstraint(cid1, maxForce=500.000000)
cid2 = p.createConstraint(1, 9, 1, 12, p.JOINT_POINT2POINT, [0.000000, 0.000000, 0.000000],
                          [0.000000, 0.005000, 0.200000], [0.000000, 0.010000, 0.200000],
                          [0.000000, 0.000000, 0.000000, 1.000000],
                          [0.000000, 0.000000, 0.000000, 1.000000])
p.changeConstraint(cid2, maxForce=500.000000)
cid3 = p.createConstraint(1, 22, 1, 25, p.JOINT_POINT2POINT, [0.000000, 0.000000, 0.000000],
                          [0.000000, 0.005000, 0.200000], [0.000000, 0.010000, 0.200000],
                          [0.000000, 0.000000, 0.000000, 1.000000],
                          [0.000000, 0.000000, 0.000000, 1.000000])
p.changeConstraint(cid3, maxForce=500.000000)
p.setGravity(0.000000, 0.000000, 0.000000)
p.stepSimulation()
p.disconnect()

开发者ID:bulletphysics，项目名称:bullet3，代码行数:30，代码来源:quadruped_setup_playback.py

示例15: range

import pybullet as p
import time

p.connect(p.GUI)
p.loadURDF("plane.urdf",useMaximalCoordinates=True)
p.loadURDF("tray/traybox.urdf",useMaximalCoordinates=True)

gravXid = p.addUserDebugParameter("gravityX",-10,10,0)
gravYid = p.addUserDebugParameter("gravityY",-10,10,0)
gravZid = p.addUserDebugParameter("gravityZ",-10,10,-10)
p.setPhysicsEngineParameter(numSolverIterations=10)
p.setPhysicsEngineParameter(contactBreakingThreshold=0.001)
for i in range (10):
    for j in range (10):
        for k in range (5):
            ob = p.loadURDF("sphere_1cm.urdf",[0.02*i,0.02*j,0.2+0.02*k],useMaximalCoordinates=True)
p.setGravity(0,0,-10)
p.setRealTimeSimulation(1)
while True:
    gravX = p.readUserDebugParameter(gravXid)
    gravY = p.readUserDebugParameter(gravYid)
    gravZ = p.readUserDebugParameter(gravZid)
    p.setGravity(gravX,gravY,gravZ)
    time.sleep(0.01)

开发者ID:MixerMovies，项目名称:RedShadow，代码行数:24，代码来源:manyspheres.py

示例16: clean_everything

	def clean_everything(self):
		#p.resetSimulation()
		p.setGravity(0, 0, -self.gravity)
		p.setDefaultContactERP(0.9)
		p.setPhysicsEngineParameter(fixedTimeStep=self.timestep*self.frame_skip, numSolverIterations=5, numSubSteps=self.frame_skip)

开发者ID:antarespilot，项目名称:bullet3，代码行数:5，代码来源:scene_abstract.py

示例17: range

		if p.getJointInfo(robot, c)[3] > -1:
			for r in range(3):
				result[r] += jacobian[r][i] * vector[c]
			i += 1
	return result


clid = p.connect(p.SHARED_MEMORY)
if (clid<0):
	p.connect(p.DIRECT)

time_step = 0.001
gravity_constant = -9.81
p.resetSimulation()
p.setTimeStep(time_step)
p.setGravity(0.0, 0.0, gravity_constant)

p.loadURDF("plane.urdf",[0,0,-0.3])

kukaId = p.loadURDF("TwoJointRobot_w_fixedJoints.urdf", useFixedBase=True)
#kukaId = p.loadURDF("TwoJointRobot_w_fixedJoints.urdf",[0,0,0])
#kukaId = p.loadURDF("kuka_iiwa/model.urdf",[0,0,0])
#kukaId = p.loadURDF("kuka_lwr/kuka.urdf",[0,0,0])
#kukaId = p.loadURDF("humanoid/nao.urdf",[0,0,0])
p.resetBasePositionAndOrientation(kukaId,[0,0,0],[0,0,0,1])
numJoints = p.getNumJoints(kukaId)
kukaEndEffectorIndex = numJoints - 1

# Set a joint target for the position control and step the sim.
setJointPosition(kukaId, [0.1] * numJoints)
p.stepSimulation()

开发者ID:AndrewMeadows，项目名称:bullet3，代码行数:31，代码来源:jacobian.py

示例18: range

p.resetBasePositionAndOrientation(ob,[0.000000,1.000000,1.204500],[0.000000,0.000000,0.000000,1.000000])
objects = [p.loadURDF("teddy_vhacd.urdf", -0.100000,0.600000,0.850000,0.000000,0.000000,0.000000,1.000000)]
objects = [p.loadURDF("sphere_small.urdf", -0.100000,0.955006,1.169706,0.633232,-0.000000,-0.000000,0.773962)]
objects = [p.loadURDF("cube_small.urdf", 0.300000,0.600000,0.850000,0.000000,0.000000,0.000000,1.000000)]
objects = [p.loadURDF("table_square/table_square.urdf", -1.000000,0.000000,0.000000,0.000000,0.000000,0.000000,1.000000)]
ob = objects[0]
jointPositions=[ 0.000000 ]
for jointIndex in range (p.getNumJoints(ob)):
	p.resetJointState(ob,jointIndex,jointPositions[jointIndex])

objects = [p.loadURDF("husky/husky.urdf", 2.000000,-5.000000,1.000000,0.000000,0.000000,0.000000,1.000000)]
ob = objects[0]
jointPositions=[ 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000 ]
for jointIndex in range (p.getNumJoints(ob)):
	p.resetJointState(ob,jointIndex,jointPositions[jointIndex])

p.configureDebugVisualizer(p.COV_ENABLE_RENDERING, 1)

p.setGravity(0.000000,0.000000,0.000000)
p.setGravity(0,0,-10)

##show this for 10 seconds
#now = time.time()
#while (time.time() < now+10):
#	p.stepSimulation()
p.setRealTimeSimulation(1)

while (1):
	p.setGravity(0,0,-10)
p.disconnect()

开发者ID:Valentactive，项目名称:bullet3，代码行数:30，代码来源:vr_kuka_setup.py

示例19:

plt.ion()

img = [[1,2,3]*50]*100#np.random.rand(200, 320)
#img = [tandard_normal((50,100))
image = plt.imshow(img,interpolation='none',animated=True,label="blah")
ax = plt.gca()


pybullet.connect(pybullet.DIRECT)

#pybullet.loadPlugin("eglRendererPlugin")
pybullet.loadURDF("plane.urdf",[0,0,-1])
pybullet.loadURDF("r2d2.urdf")

pybullet.setGravity(0,0,-10)
camTargetPos = [0,0,0]
cameraUp = [0,0,1]
cameraPos = [1,1,1]

pitch = -10.0

roll=0
upAxisIndex = 2
camDistance = 4
pixelWidth = 320
pixelHeight = 200
nearPlane = 0.01
farPlane = 100

fov = 60

开发者ID:jiapei100，项目名称:bullet3，代码行数:30，代码来源:testrender.py

示例20: range

import pybullet as p
import pybullet_data
import os
import time
GRAVITY = -9.8
dt = 1e-3
iters = 2000

physicsClient = p.connect(p.GUI)
p.setAdditionalSearchPath(pybullet_data.getDataPath())
p.resetSimulation()
#p.setRealTimeSimulation(True)
p.setGravity(0, 0, GRAVITY)
p.setTimeStep(dt)
planeId = p.loadURDF("plane.urdf")
cubeStartPos = [0, 0, 1.13]
cubeStartOrientation = p.getQuaternionFromEuler([0., 0, 0])
botId = p.loadURDF("biped/biped2d_pybullet.urdf", cubeStartPos, cubeStartOrientation)

#disable the default velocity motors
#and set some position control with small force to emulate joint friction/return to a rest pose
jointFrictionForce = 1
for joint in range(p.getNumJoints(botId)):
  p.setJointMotorControl2(botId, joint, p.POSITION_CONTROL, force=jointFrictionForce)

#for i in range(10000):
#     p.setJointMotorControl2(botId, 1, p.TORQUE_CONTROL, force=1098.0)
#     p.stepSimulation()
#import ipdb
#ipdb.set_trace()
import time

开发者ID:bulletphysics，项目名称:bullet3，代码行数:31，代码来源:biped2d_pybullet.py

注：本文中的pybullet.setGravity函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python pybullet.setJointMotorControl2函数代码示例发布时间：2022-05-25

Python pybullet.resetSimulation函数代码示例发布时间：2022-05-25

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13925|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10291|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4165|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4064|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3889|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3538|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3065|2022-01-22

8 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2723|2022-01-22

9 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2682|2022-05-25

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2344|2022-01-22

客服电话

电子邮件

Python pybullet.setGravity函数代码示例

示例1: setupWorld

示例2: testJacobian

示例3: evaluate_params

示例4: setupWorld

示例5: _reset

示例6: _reset

示例7: test_rolling_friction

示例8: __enter__

示例9: _reset

示例10: _reset

示例11: _reset

示例12: main

示例13: print

示例14: range

示例15: range

示例16: clean_everything

示例17: range

示例18: range

示例19:

示例20: range

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053

示例8: enter