VB.NET SqlBulkCopy.WriteToServer方法代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› VB.NET›VB.NET教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了VB.NET中System.Data.SqlClient.SqlBulkCopy.WriteToServer方法的典型用法代码示例。如果您正苦于以下问题：VB.NET SqlBulkCopy.WriteToServer方法的具体用法？VB.NET SqlBulkCopy.WriteToServer怎么用？VB.NET SqlBulkCopy.WriteToServer使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类System.Data.SqlClient.SqlBulkCopy的用法示例。

在下文中一共展示了SqlBulkCopy.WriteToServer方法的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的VB.NET代码示例。

示例1: Module1

' 导入命名空间
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using connection As SqlConnection = _
           New SqlConnection(connectionString)
            connection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                connection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Create a table with some rows.
            Dim newProducts As DataTable = MakeTable()

            ' Make a change to one of the rows in the DataTable.
            Dim row As DataRow = newProducts.Rows(0)
            row.BeginEdit()
            row("Name") = "AAA"
            row.EndEdit()

            ' Set up the bulk copy object. 
            ' Note that the column positions in the source DataTable 
            ' match the column positions in the destination table, 
            ' so there is no need to map columns.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connection)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write unchanged rows from the source to the destination.
                    bulkCopy.WriteToServer(newProducts, DataRowState.Unchanged)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function MakeTable() As DataTable
        ' Create a new DataTable named NewProducts.
        Dim newProducts As DataTable = _
         New DataTable("NewProducts")

        ' Add three column objects to the table.
        Dim productID As DataColumn = New DataColumn()
        productID.DataType = System.Type.GetType("System.Int32")
        productID.ColumnName = "ProductID"
        productID.AutoIncrement = True
        newProducts.Columns.Add(productID)

        Dim productName As DataColumn = New DataColumn()
        productName.DataType = System.Type.GetType("System.String")
        productName.ColumnName = "Name"
        newProducts.Columns.Add(productName)

        Dim productNumber As DataColumn = New DataColumn()
        productNumber.DataType = System.Type.GetType("System.String")
        productNumber.ColumnName = "ProductNumber"
        newProducts.Columns.Add(productNumber)

        ' Create an array for DataColumn objects.
        Dim keys(0) As DataColumn
        keys(0) = productID
        newProducts.PrimaryKey = keys

        ' Add some new rows to the collection.
        Dim row As DataRow
        row = newProducts.NewRow()
        row("Name") = "CC-101-WH"
        row("ProductNumber") = "Cyclocomputer - White"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-BK"
        row("ProductNumber") = "Cyclocomputer - Black"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-ST"
        row("ProductNumber") = "Cyclocomputer - Stainless"
        newProducts.Rows.Add(row)
        newProducts.AcceptChanges()

        ' Return the new DataTable.
        Return newProducts
    End Function

    Private Function GetConnectionString() As String
        ' To avoid storing the connection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

开发者ID:VB.NET开发者，项目名称:System.Data.SqlClient，代码行数:115，代码来源:SqlBulkCopy.WriteToServer

示例2: Module1

' 导入命名空间
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Set up the bulk copy object using a connection string. 
            ' In the real world you would not use SqlBulkCopy to move
            ' data from one table to the other in the same database.
            Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
                bulkCopy.DestinationTableName = _
                "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write from the source to the destination.
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                Finally
                    ' Close the SqlDataReader. The SqlBulkCopy
                    ' object is automatically closed at the end
                    ' of the Using block.
                    reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

开发者ID:VB.NET开发者，项目名称:System.Data.SqlClient，代码行数:68，代码来源:SqlBulkCopy.WriteToServer

示例3: Module1

' 导入命名空间
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using connection As SqlConnection = _
           New SqlConnection(connectionString)
            connection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                connection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Create a table with some rows.
            Dim newProducts As DataTable = MakeTable()

            ' Note that the column positions in the source DataTable 
            ' match the column positions in the destination table, 
            ' so there is no need to map columns.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connection)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write from the source to the destination.
                    bulkCopy.WriteToServer(newProducts)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function MakeTable() As DataTable
        ' Create a new DataTable named NewProducts.
        Dim newProducts As DataTable = _
         New DataTable("NewProducts")

        ' Add three column objects to the table.
        Dim productID As DataColumn = New DataColumn()
        productID.DataType = System.Type.GetType("System.Int32")
        productID.ColumnName = "ProductID"
        productID.AutoIncrement = True
        newProducts.Columns.Add(productID)

        Dim productName As DataColumn = New DataColumn()
        productName.DataType = System.Type.GetType("System.String")
        productName.ColumnName = "Name"
        newProducts.Columns.Add(productName)

        Dim productNumber As DataColumn = New DataColumn()
        productNumber.DataType = System.Type.GetType("System.String")
        productNumber.ColumnName = "ProductNumber"
        newProducts.Columns.Add(productNumber)

        ' Create an array for DataColumn objects.
        Dim keys(0) As DataColumn
        keys(0) = productID
        newProducts.PrimaryKey = keys

        ' Add some new rows to the collection.
        Dim row As DataRow
        row = newProducts.NewRow()
        row("Name") = "CC-101-WH"
        row("ProductNumber") = "Cyclocomputer - White"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-BK"
        row("ProductNumber") = "Cyclocomputer - Black"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-ST"
        row("ProductNumber") = "Cyclocomputer - Stainless"
        newProducts.Rows.Add(row)
        newProducts.AcceptChanges()

        ' Return the new DataTable.
        Return newProducts
    End Function

    Private Function GetConnectionString() As String
        ' To avoid storing the connection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

开发者ID:VB.NET开发者，项目名称:System.Data.SqlClient，代码行数:108，代码来源:SqlBulkCopy.WriteToServer

示例4: Module1

' 导入命名空间
Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using connection As SqlConnection = _
           New SqlConnection(connectionString)
            connection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                connection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Create a table with some rows.
            Dim newProducts As DataTable = MakeTable()

            ' Get a reference to a single row in the table.
            Dim rowArray() As DataRow = newProducts.Select( _
             "Name='CC-101-BK'")

            ' Note that the column positions in the source DataTable 
            ' match the column positions in the destination table, 
            ' so there is no need to map columns.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connection)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write the array of rows to the destination.
                    bulkCopy.WriteToServer(rowArray)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function MakeTable() As DataTable
        ' Create a new DataTable named NewProducts.
        Dim newProducts As DataTable = _
         New DataTable("NewProducts")

        ' Add three column objects to the table.
        Dim productID As DataColumn = New DataColumn()
        productID.DataType = System.Type.GetType("System.Int32")
        productID.ColumnName = "ProductID"
        productID.AutoIncrement = True
        newProducts.Columns.Add(productID)

        Dim productName As DataColumn = New DataColumn()
        productName.DataType = System.Type.GetType("System.String")
        productName.ColumnName = "Name"
        newProducts.Columns.Add(productName)

        Dim productNumber As DataColumn = New DataColumn()
        productNumber.DataType = System.Type.GetType("System.String")
        productNumber.ColumnName = "ProductNumber"
        newProducts.Columns.Add(productNumber)

        ' Create an array for DataColumn objects.
        Dim keys(0) As DataColumn
        keys(0) = productID
        newProducts.PrimaryKey = keys

        ' Add some new rows to the collection.
        Dim row As DataRow
        row = newProducts.NewRow()
        row("Name") = "CC-101-WH"
        row("ProductNumber") = "Cyclocomputer - White"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-BK"
        row("ProductNumber") = "Cyclocomputer - Black"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-ST"
        row("ProductNumber") = "Cyclocomputer - Stainless"
        newProducts.Rows.Add(row)
        newProducts.AcceptChanges()

        ' Return the new DataTable.
        Return newProducts
    End Function

    Private Function GetConnectionString() As String
        ' To avoid storing the connection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

开发者ID:VB.NET开发者，项目名称:System.Data.SqlClient，代码行数:112，代码来源:SqlBulkCopy.WriteToServer

注：本文中的System.Data.SqlClient.SqlBulkCopy.WriteToServer方法示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。