• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Python ipwrapper.linkSet函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Python中vdsm.network.ipwrapper.linkSet函数的典型用法代码示例。如果您正苦于以下问题:Python linkSet函数的具体用法?Python linkSet怎么用?Python linkSet使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了linkSet函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: _down

 def _down(self):
     with monitor.Monitor(groups=('link',), timeout=2) as mon:
         linkSet(self.devName, ['down'])
         for event in mon:
             if (event.get('name') == self.devName and
                     event.get('state') == 'down'):
                 return
开发者ID:andrewlukoshko,项目名称:vdsm,代码行数:7,代码来源:nettestlib.py


示例2: removeBond

    def removeBond(self, bonding):
        if not self.owned_device(bonding.name):
            IfcfgAcquire.acquire_device(bonding.name)
        to_be_removed = self._ifaceDownAndCleanup(bonding)
        if to_be_removed:
            self.configApplier.removeBonding(bonding.name)
            if bonding.on_removal_just_detach_from_network:
                # Recreate the bond with ip and master info cleared
                bonding.ipv4 = address.IPv4()
                bonding.ipv6 = address.IPv6()
                bonding.master = None
                bonding.configure()
            else:
                for slave in bonding.slaves:
                    slave.remove()
                self.runningConfig.removeBonding(bonding.name)
        else:
            vlans = link_vlan.get_vlans_on_base_device(bonding.name)
            set_mtu = self._setNewMtu(bonding, vlans)
            # Since we are not taking the device up again, ifcfg will not be
            # read at this point and we need to set the live mtu value.
            # Note that ip link set dev bondX mtu Y sets Y on all its links
            if set_mtu is not None:
                ipwrapper.linkSet(bonding.name, ['mtu', str(set_mtu)])

            # If the bond was bridged, we must remove BRIDGE parameter from its
            # ifcfg configuration file.
            if bonding.bridge:
                self.configApplier.dropBridgeParameter(bonding.name)

            bond_used_by_net = self.net_info.getNetworkForIface(bonding.name)
            bond_info = self.net_info.bondings[bonding.name]
            if (not bond_used_by_net and
                    (bond_info['ipv4addrs'] or bond_info['ipv6addrs'])):
                ipwrapper.addrFlush(bonding.name)
开发者ID:oVirt,项目名称:vdsm,代码行数:35,代码来源:ifcfg.py


示例3: removeNic

    def removeNic(self, nic, remove_even_if_used=False):
        if not self.owned_device(nic.name):
            IfcfgAcquire.acquire_device(nic.name)

        # If the nic is top device we should ifdown it even if it is
        # used by a VLAN. Otherwise we would keep its IP address.
        remove_even_if_used |= nic.master is None

        to_be_removed = self._ifaceDownAndCleanup(nic, remove_even_if_used)
        if to_be_removed:
            self.configApplier.removeNic(nic.name)
            if nic.name in nics.nics():
                _exec_ifup(nic)
            else:
                logging.warning('host interface %s missing', nic.name)
        else:
            vlans = link_vlan.get_vlans_on_base_device(nic.name)
            set_mtu = self._setNewMtu(nic, vlans)
            # Since we are not taking the device up again, ifcfg will not be
            # read at this point and we need to set the live mtu value
            if set_mtu is not None:
                ipwrapper.linkSet(nic.name, ['mtu', str(set_mtu)])

            # If the nic was bridged, we must remove BRIDGE parameter from its
            # ifcfg configuration file.
            if nic.bridge:
                self.configApplier.dropBridgeParameter(nic.name)
开发者ID:oVirt,项目名称:vdsm,代码行数:27,代码来源:ifcfg.py


示例4: test_switch_change_bonded_network_with_dhclient

    def test_switch_change_bonded_network_with_dhclient(self):
        with veth_pair() as (server, nic1):
            with dummy_device() as nic2:
                NETSETUP_SOURCE = {NET1_NAME: {
                    'bonding': BOND_NAME,
                    'bootproto': 'dhcp',
                    'blockingdhcp': True,
                    'switch': self.switch_type_source}}
                NETSETUP_TARGET = _change_switch_type(
                    NETSETUP_SOURCE, self.switch_type_target)
                BONDSETUP_SOURCE = {BOND_NAME: {
                    'nics': [nic1, nic2], 'switch': self.switch_type_source}}
                BONDSETUP_TARGET = _change_switch_type(
                    BONDSETUP_SOURCE, self.switch_type_target)

                addrAdd(server, IPv4_ADDRESS, IPv4_PREFIX_LEN)
                linkSet(server, ['up'])

                with dnsmasq_run(server, DHCPv4_RANGE_FROM, DHCPv4_RANGE_TO):
                    with self.setupNetworks(
                            NETSETUP_SOURCE, BONDSETUP_SOURCE, NOCHK):
                        self.setupNetworks(
                            NETSETUP_TARGET, BONDSETUP_TARGET, NOCHK)
                        self.assertNetwork(
                            NET1_NAME, NETSETUP_TARGET[NET1_NAME])
                        self.assertBond(BOND_NAME, BONDSETUP_TARGET[BOND_NAME])
开发者ID:EdDev,项目名称:vdsm,代码行数:26,代码来源:func_switch_type_change_test.py


示例5: removeBond

    def removeBond(self, bonding):
        if not self.owned_device(bonding.name):
            IfcfgAcquire.acquire_device(bonding.name)
        to_be_removed = self._ifaceDownAndCleanup(bonding)
        if to_be_removed:
            self.configApplier.removeBonding(bonding.name)
            if bonding.on_removal_just_detach_from_network:
                # Recreate the bond with ip and master info cleared
                bonding.ipv4 = address.IPv4()
                bonding.ipv6 = address.IPv6()
                bonding.master = None
                bonding.configure()
            else:
                for slave in bonding.slaves:
                    slave.remove()
                if self.unifiedPersistence:
                    self.runningConfig.removeBonding(bonding.name)
        else:
            set_mtu = self._setNewMtu(bonding, vlans.vlan_devs_for_iface(bonding.name))
            # Since we are not taking the device up again, ifcfg will not be
            # read at this point and we need to set the live mtu value.
            # Note that ip link set dev bondX mtu Y sets Y on all its links
            if set_mtu is not None:
                ipwrapper.linkSet(bonding.name, ["mtu", str(set_mtu)])

            # If the bond was bridged, we must remove BRIDGE parameter from its
            # ifcfg configuration file.
            if bonding.bridge:
                self.configApplier.dropBridgeParameter(bonding.name)
开发者ID:nirs,项目名称:vdsm,代码行数:29,代码来源:ifcfg.py


示例6: test_ovirtmgmtm_to_ovs

    def test_ovirtmgmtm_to_ovs(self):
        """ Test transformation of initial management network to OVS.
        # TODO: test it with ovirtmgmt and test-network
        # NOTE: without default route
        # TODO: more asserts
        """
        with veth_pair() as (left, right):
            addrAdd(left, IP_ADDRESS, IP_CIDR)
            addrAdd(left, IPv6_ADDRESS, IPv6_CIDR, 6)
            linkSet(left, ['up'])
            with dnsmasq_run(left, DHCP_RANGE_FROM, DHCP_RANGE_TO,
                             DHCPv6_RANGE_FROM, DHCPv6_RANGE_TO, IP_GATEWAY):
                network = {
                    NETWORK_NAME: {'nic': right, 'bootproto': 'dhcp',
                                   'bridged': True, 'blockingdhcp': True}}
                options = NOCHK
                options['ovs'] = False

                try:
                    status, msg = self.setupNetworks(network, {}, options)
                    self.assertEqual(status, SUCCESS, msg)
                    self.assertNetworkExists(NETWORK_NAME)

                    options['ovs'] = True
                    status, msg = self.setupNetworks(network, {}, options)
                    self.assertEqual(status, SUCCESS, msg)
                    self.assertNetworkExists(NETWORK_NAME)
                finally:
                    dhcp.delete_dhclient_leases(NETWORK_NAME, True, False)
开发者ID:andrewlukoshko,项目名称:vdsm,代码行数:29,代码来源:networkTestsOVS.py


示例7: test_add_net_with_dhcp

    def test_add_net_with_dhcp(self, switch, families, bridged):

        with veth_pair() as (server, client):
            addrAdd(server, IPv4_ADDRESS, IPv4_PREFIX_LEN)
            addrAdd(server, IPv6_ADDRESS, IPv6_CIDR, IpFamily.IPv6)
            linkSet(server, ['up'])
            with dnsmasq_run(server, DHCPv4_RANGE_FROM, DHCPv4_RANGE_TO,
                             DHCPv6_RANGE_FROM, DHCPv6_RANGE_TO,
                             router=DHCPv4_GATEWAY):

                network_attrs = {'bridged': bridged,
                                 'nic': client,
                                 'blockingdhcp': True,
                                 'switch': switch}

                if IpFamily.IPv4 in families:
                    network_attrs['bootproto'] = 'dhcp'
                if IpFamily.IPv6 in families:
                    network_attrs['dhcpv6'] = True

                netcreate = {NETWORK_NAME: network_attrs}

                with adapter.setupNetworks(netcreate, {}, NOCHK):
                    adapter.assertNetworkIp(
                        NETWORK_NAME, netcreate[NETWORK_NAME])
开发者ID:nirs,项目名称:vdsm,代码行数:25,代码来源:dynamic_ip_test.py


示例8: up

 def up(self, admin_blocking=True, oper_blocking=False):
     if self._is_dpdk_type:
         dpdk.up(self._dev)
         return
     if admin_blocking:
         self._up_blocking(oper_blocking)
     else:
         ipwrapper.linkSet(self._dev, [STATE_UP])
开发者ID:nirs,项目名称:vdsm,代码行数:8,代码来源:iface.py


示例9: removeNic

 def removeNic(self, nic, remove_even_if_used=False):
     to_be_removed = self._ifaceDownAndCleanup(nic, remove_even_if_used)
     if to_be_removed:
         self.configApplier.removeNic(nic.name)
         if nic.name in nics.nics():
             _exec_ifup(nic)
         else:
             logging.warning('host interface %s missing', nic.name)
     else:
         set_mtu = self._setNewMtu(nic, vlans.vlan_devs_for_iface(nic.name))
         # Since we are not taking the device up again, ifcfg will not be
         # read at this point and we need to set the live mtu value
         if set_mtu is not None:
             ipwrapper.linkSet(nic.name, ['mtu', str(set_mtu)])
开发者ID:andrewlukoshko,项目名称:vdsm,代码行数:14,代码来源:ifcfg.py


示例10: test_attach_dhcp_nic_to_ipless_network

    def test_attach_dhcp_nic_to_ipless_network(self):
        with veth_pair() as (server, client):
            addrAdd(server, IPv4_ADDRESS, IPv4_PREFIX_LEN)
            linkSet(server, ["up"])
            with dnsmasq_run(server, DHCPv4_RANGE_FROM, DHCPv4_RANGE_TO):
                with dhclient_run(client):
                    self.assertDhclient(client, family=4)

                    NETCREATE = {NETWORK_NAME: {"nic": client, "switch": self.switch}}
                    with self.setupNetworks(NETCREATE, {}, NOCHK):
                        nic_netinfo = self.netinfo.nics[client]
                        self.assertDisabledIPv4(nic_netinfo)
                        net_netinfo = self.netinfo.networks[NETWORK_NAME]
                        self.assertDisabledIPv4(net_netinfo)
开发者ID:nirs,项目名称:vdsm,代码行数:14,代码来源:func_dhclient_test.py


示例11: _test_add_net_with_dhcpv4

    def _test_add_net_with_dhcpv4(self, bridged=False):

        with veth_pair() as (server, client):
            addrAdd(server, IPv4_ADDRESS, IPv4_PREFIX_LEN)
            linkSet(server, ['up'])
            with dnsmasq_run(server, DHCPv4_RANGE_FROM, DHCPv4_RANGE_TO):

                netcreate = {NETWORK_NAME: {
                    'bridged': bridged, 'nic': client, 'blockingdhcp': True,
                    'bootproto': 'dhcp', 'switch': self.switch}}

                with self.setupNetworks(netcreate, {}, NOCHK):
                    self.assertNetworkIp(
                        NETWORK_NAME, netcreate[NETWORK_NAME])
开发者ID:yingyun001,项目名称:vdsm,代码行数:14,代码来源:func_dhclient_test.py


示例12: change_numvfs

def change_numvfs(pci_path, numvfs, net_name):
    """Change number of virtual functions of a device.

    The persistence is stored in the same place as other network persistence is
    stored. A call to setSafeNetworkConfig() will persist it across reboots.
    """
    # TODO: net_name is here only because it is hard to call pf_to_net_name
    # TODO: from here. once all our code will be under lib/vdsm this should be
    # TODO: removed.
    logging.info("Changing number of vfs on device %s -> %s.", pci_path, numvfs)
    _update_numvfs(pci_path, numvfs)

    logging.info("Changing number of vfs on device %s -> %s. succeeded.", pci_path, numvfs)
    _persist_numvfs(pci_path, numvfs)

    ipwrapper.linkSet(net_name, ["up"])
开发者ID:nirs,项目名称:vdsm,代码行数:16,代码来源:api.py


示例13: test_attach_dhcp_nic_to_dhcpv6_bridged_network

    def test_attach_dhcp_nic_to_dhcpv6_bridged_network(self, switch):
        with veth_pair() as (server, client):
            addrAdd(server, IPv6_ADDRESS, IPv6_CIDR, IpFamily.IPv6)
            linkSet(server, ['up'])
            with dnsmasq_run(server, DHCPv6_RANGE_FROM, DHCPv6_RANGE_TO):
                with dhclient_run(client, family=IpFamily.IPv6):
                    adapter.assertDhclient(client, family=IpFamily.IPv6)

                    NETCREATE = {NETWORK_NAME: {
                        'nic': client, 'dhcpv6': True,
                        'blockingdhcp': True, 'switch': switch}}
                    with adapter.setupNetworks(NETCREATE, {}, NOCHK):
                        nic_netinfo = adapter.netinfo.nics[client]
                        adapter.assertDisabledIPv6(nic_netinfo)
                        adapter.assertNoDhclient(client, family=IpFamily.IPv6)
                        net_netinfo = adapter.netinfo.networks[NETWORK_NAME]
                        adapter.assertDHCPv6(net_netinfo)
                        adapter.assertDhclient(NETWORK_NAME,
                                               family=IpFamily.IPv6)
开发者ID:nirs,项目名称:vdsm,代码行数:19,代码来源:dynamic_ip_test.py


示例14: _test_add_net_with_dhcpv4

    def _test_add_net_with_dhcpv4(self, bridged=False):

        with veth_pair() as (server, client):
            addrAdd(server, IPv4_ADDRESS, IPv4_PREFIX_LEN)
            linkSet(server, ["up"])
            with dnsmasq_run(server, DHCPv4_RANGE_FROM, DHCPv4_RANGE_TO):

                netcreate = {
                    NETWORK_NAME: {
                        "bridged": bridged,
                        "nic": client,
                        "blockingdhcp": True,
                        "bootproto": "dhcp",
                        "switch": self.switch,
                    }
                }

                with self.setupNetworks(netcreate, {}, NOCHK):
                    self.assertNetworkIp(NETWORK_NAME, netcreate[NETWORK_NAME])
开发者ID:nirs,项目名称:vdsm,代码行数:19,代码来源:func_dhclient_test.py


示例15: removeNic

    def removeNic(self, nic, remove_even_if_used=False):
        if not self.owned_device(nic.name):
            IfcfgAcquire.acquire_device(nic.name)
        to_be_removed = self._ifaceDownAndCleanup(nic, remove_even_if_used)
        if to_be_removed:
            self.configApplier.removeNic(nic.name)
            if nic.name in nics.nics():
                _exec_ifup(nic)
            else:
                logging.warning("host interface %s missing", nic.name)
        else:
            set_mtu = self._setNewMtu(nic, vlans.vlan_devs_for_iface(nic.name))
            # Since we are not taking the device up again, ifcfg will not be
            # read at this point and we need to set the live mtu value
            if set_mtu is not None:
                ipwrapper.linkSet(nic.name, ["mtu", str(set_mtu)])

            # If the nic was bridged, we must remove BRIDGE parameter from its
            # ifcfg configuration file.
            if nic.bridge:
                self.configApplier.dropBridgeParameter(nic.name)
开发者ID:nirs,项目名称:vdsm,代码行数:21,代码来源:ifcfg.py


示例16: test_attach_dhcp_nic_to_ipless_network

    def test_attach_dhcp_nic_to_ipless_network(self, switch):
        with veth_pair() as (server, client):
            addrAdd(server, IPv4_ADDRESS, IPv4_PREFIX_LEN)
            addrAdd(server, IPv6_ADDRESS, IPv6_CIDR, IpFamily.IPv6)
            linkSet(server, ['up'])
            with dnsmasq_run(server, DHCPv4_RANGE_FROM, DHCPv4_RANGE_TO,
                             DHCPv6_RANGE_FROM, DHCPv6_RANGE_TO,
                             router=DHCPv4_GATEWAY):
                with dhclient_run(client):
                    adapter.assertDhclient(client, family=IpFamily.IPv4)
                    adapter.assertDhclient(client, family=IpFamily.IPv6)

                    NETCREATE = {NETWORK_NAME: {
                        'nic': client, 'switch': switch}}
                    with adapter.setupNetworks(NETCREATE, {}, NOCHK):
                        nic_netinfo = adapter.netinfo.nics[client]
                        adapter.assertDisabledIPv4(nic_netinfo)
                        adapter.assertDisabledIPv6(nic_netinfo)
                        net_netinfo = adapter.netinfo.networks[NETWORK_NAME]
                        adapter.assertDisabledIPv4(net_netinfo)
                        adapter.assertDisabledIPv6(nic_netinfo)
开发者ID:nirs,项目名称:vdsm,代码行数:21,代码来源:dynamic_ip_test.py


示例17: _set_network_ip_config

def _set_network_ip_config(ip_config):
    """Set IP configuration on Vdsm controlled OVS network"""
    iface = ip_config.top_dev
    ipv4 = ip_config.ipv4
    ipv6 = ip_config.ipv6
    port = ip_config.port
    blocking_dhcp = ip_config.blocking_dhcp

    net_dev = NetDevice(iface, iproute2, ipv4=ipv4, ipv6=ipv6,
                        blockingdhcp=blocking_dhcp)
    DynamicSourceRoute.addInterfaceTracking(net_dev)
    ipwrapper.linkSet(iface, ['down'])
    if ipv4.address:
        ipwrapper.addrAdd(iface, ipv4.address, ipv4.netmask)
    if ipv4.gateway and ipv4.defaultRoute:
        ipwrapper.routeAdd(['default', 'via', ipv4.gateway])
    if ipv6.address or ipv6.ipv6autoconf or ipv6.dhcpv6:
        sysctl.disable_ipv6(iface, disable=False)
    else:
        sysctl.disable_ipv6(iface)
    if ipv6.address:
        ipv6addr, ipv6netmask = ipv6.address.split('/')
        ipwrapper.addrAdd(iface, ipv6addr, ipv6netmask, family=6)
        if ipv6.gateway:
            ipwrapper.routeAdd(['default', 'via', ipv6.gateway], dev=iface,
                               family=6)
    ipwrapper.linkSet(port, ['up'])
    ipwrapper.linkSet(iface, ['up'])
    if ipv4.bootproto == 'dhcp':
        _run_dhclient(iface, blocking_dhcp, ipv4.defaultRoute, 4)
    if ipv6.dhcpv6:
        _run_dhclient(iface, blocking_dhcp, ipv6.defaultRoute, 6)
    iproute2._addSourceRoute(net_dev)
开发者ID:andrewlukoshko,项目名称:vdsm,代码行数:33,代码来源:ovs_before_network_setup_ip.py


示例18: removeBond

 def removeBond(self, bonding):
     to_be_removed = self._ifaceDownAndCleanup(bonding)
     if to_be_removed:
         self.configApplier.removeBonding(bonding.name)
         if bonding.on_removal_just_detach_from_network:
             # Recreate the bond with ip and master info cleared
             bonding.ipv4 = IPv4()
             bonding.ipv6 = IPv6()
             bonding.master = None
             bonding.configure()
         else:
             for slave in bonding.slaves:
                 slave.remove()
             if self.unifiedPersistence:
                 self.runningConfig.removeBonding(bonding.name)
     else:
         set_mtu = self._setNewMtu(bonding,
                                   vlans.vlan_devs_for_iface(bonding.name))
         # Since we are not taking the device up again, ifcfg will not be
         # read at this point and we need to set the live mtu value.
         # Note that ip link set dev bondX mtu Y sets Y on all its links
         if set_mtu is not None:
             ipwrapper.linkSet(bonding.name, ['mtu', str(set_mtu)])
开发者ID:andrewlukoshko,项目名称:vdsm,代码行数:23,代码来源:ifcfg.py


示例19: test_local_auto_with_dynamic_address_from_ra

    def test_local_auto_with_dynamic_address_from_ra(self):
        IPV6_NETADDRESS = '2001:1:1:1'
        IPV6_NETPREFIX_LEN = '64'
        with veth_pair() as (server, client):
            ipwrapper.addrAdd(server, IPV6_NETADDRESS + '::1',
                              IPV6_NETPREFIX_LEN, family=6)
            ipwrapper.linkSet(server, ['up'])
            with dnsmasq_run(server, ipv6_slaac_prefix=IPV6_NETADDRESS + '::'):
                with wait_for_ipv6(client):
                    ipwrapper.linkSet(client, ['up'])

                # Expecting link and global addresses on client iface
                # The addresses are given randomly, so we sort them
                ip_addrs = sorted(addresses.getIpAddrs()[client],
                                  key=lambda ip: ip['address'])
                self.assertEqual(2, len(ip_addrs), ip_addrs)

                self.assertTrue(addresses.is_dynamic(ip_addrs[0]))
                self.assertEqual('global', ip_addrs[0]['scope'])
                self.assertEqual(IPV6_NETADDRESS,
                                 ip_addrs[0]['address'][:len(IPV6_NETADDRESS)])

                self.assertEqual('link', ip_addrs[1]['scope'])
开发者ID:nirs,项目名称:vdsm,代码行数:23,代码来源:netinfo_test.py


示例20: ifdown

 def ifdown(self, iface):
     ipwrapper.linkSet(iface.name, ['down'])
     dhclient = DhcpClient(iface.name)
     dhclient.shutdown()
开发者ID:andrewlukoshko,项目名称:vdsm,代码行数:4,代码来源:iproute2.py



注:本文中的vdsm.network.ipwrapper.linkSet函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Python qemuimg.create函数代码示例发布时间:2022-05-26
下一篇:
Python netinfo.nics函数代码示例发布时间:2022-05-26
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap