Python vbrif_portmap.validate_vbrif_at_controller函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中vbrif_portmap.validate_vbrif_at_controller函数的典型用法代码示例。如果您正苦于以下问题：Python validate_vbrif_at_controller函数的具体用法？Python validate_vbrif_at_controller怎么用？Python validate_vbrif_at_controller使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了validate_vbrif_at_controller函数的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: update_vbr_flowfilter_drop

def update_vbr_flowfilter_drop():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print 'TEST 8 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone update the VbrFlowFilterEntry to vbrthree'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)


  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOneDrop', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)


  retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop', 'UpdateFlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilterEntry Update Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst','UpdateFlowfilterOneDrop', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Updatation Validate Failed at Co-ordinator"
    exit(1)
#.........这里部分代码省略.........

开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:vbr_flowfilter.py

示例2: negative_vbr_flowfilter

def negative_vbr_flowfilter():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)
  print "Negative test scenario test cases"
  print 'TEST 3 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone negative  the VbrFlowFilterEntry to vbrthree'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree', 'VbrIfThree')
#.........这里部分代码省略.........

开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:vbr_flowfilter.py

示例3: test_vbr_flowfilter_pass

def test_vbr_flowfilter_pass():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)
  print "action type create pass"
  print "TEST 5 : VBR->FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)


  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOnePass', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilter deletete Failed"
    exit(1)

#.........这里部分代码省略.........

开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:vbr_flowfilter.py

示例4: update_vbrif_flowfilter_pass_audit

def update_vbrif_flowfilter_pass_audit():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 4 : VBRIF->Update AUDIT FLOWFILTER DROP TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  print "****UPDATE Controller IP to invalid****"
  test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
  retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
  if retval != 0:
    print "controller invalid_ip update failed"
    exit(1)
  # Delay for AUDIT
  retval = controller.wait_until_state('ControllerFirst',"down")
  if retval != 0:
    print "controller state change failed"
    exit(1)



  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
  if retval != 0:
#.........这里部分代码省略.........

开发者ID:opendaylight，项目名称:vtn，代码行数:101，代码来源:vbrif_flowfilter_audit.py

示例5: test_vbr_flowfilter_audit_1

def test_vbr_flowfilter_audit_1():

    print "****CREATE Controller with valid IP****"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)

    print """TEST 1 : create VTN and VBR FLOWFILTER when controller is down
             change the controller status to up trigger Audit and validate"""
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    print "****Create VTN****"
    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    print "****Create VBR****"
    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
    if retval != 0:
      print "VTN Create Failed"
      exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
    if retval != 0:
      print "VBRIF Create Failed"
      exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
    if retval != 0:
      print "VBR Validate Failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
    if retval != 0:
      print "After Create VBRIF Validate Failed"
      exit(1)

    retval=flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller invalid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilter Create Failed"
        exit(1)

    retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilterEntry Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
#.........这里部分代码省略.........

开发者ID:SeungWookJang，项目名称:vtn-coordinator，代码行数:101，代码来源:vbr_flowfilter_audit.py

示例6: test_vtn_mininet_ping_demo1

def test_vtn_mininet_ping_demo1():

    print """TEST 1 : One vtn and one VBridge with Two Interfaces one Portmap each
    send packets between two configured host(H1,H3)"""
    print "CREATE Controller"
    print "VTNONE->VBRONE->VBRIFONE->PORTMAP"
    print "VTNONE->VBRONE->VBRIFTWO->PORTMAP"

    child = create_mininet_topology('MININETONE', 'ControllerFirst', '2')
    if child.isalive() == True :
        print "Topology creation Success!!!"
    else:
        print "Topology creation Failed"
        close_topology(child)
        exit(1)

    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 1 :Controller Create Failed"
        close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
    if retval != 0:
        print "VBRIFONE Create Failed"
        close_topology(child)
        exit(1)
    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', position=0)
    if retval != 0:
        print "VBRIFONE Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VBRIFTWO Create Failed"
        close_topology(child)
        exit(1)
    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
    if retval != 0:
        print "VBRIFTWO Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfOne', vlan_tagged=0);
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfTwo', vlan_tagged=0);
    if retval != 0:
        print "VBRIF2 Portmap Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF2 Portmap Validate Failed"
        close_topology(child)
        exit(1)

    retval = ping_mininet (child,'h1','h3')
    if retval != 0:
        print "MININET PING FAILED"

    close_topology(child)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        close_topology(child)
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
#.........这里部分代码省略.........

开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:mininet_test.py

示例7: test_multi_ctr_mininet_ping

def test_multi_ctr_mininet_ping():
    child = create_multicontroller_mininet_topology('MININETONE')
    if child.isalive() == True :
        print "Topology creation Success!!!"
    else:
        print "Topology creation Failed"
        mininet_test.mininet_test.close_topology(child)
        exit(1)

    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = create_boundary('BOUNDARY', 'ControllerFirst', 'ControllerSecond')
    if retval != 0:
        print "Boundary  Create Failed"
        mininet_test.close_topology(child)
        exit(1)
    retval = validate_boundary('BOUNDARY', presence="yes", position=0)
    if retval != 0:
        print "Boundary  Validate  Failed after create"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerSecond')
    if retval != 0:
        print "VBRTWO Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', position=0)
    if retval != 0:
        print "VBRIFONE Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
    if retval != 0:
        print "VBRIFTWO Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', vlan_tagged=0);
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree')
    if retval != 0:
        print "VBRIFTHREE Create Failed"
        mininet_test.close_topology(child)
#.........这里部分代码省略.........

开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:multi_ctr_mininet.py

示例8: test_audit_vtn_vbr_multi_vbrif_portmap

def test_audit_vtn_vbr_multi_vbrif_portmap():
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 6 :Controller Create Failed"
        exit(1)

    print "TEST 6 : VTenant with one VBridge Two VBRIF1/VBRIF2 and One PORTMAP in VBRIF1"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfTwo')
    if retval != 0:
        print "VBRIF2 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "After Create VBRIF1 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',position=1)
    if retval != 0:
        print "After Create VBRIF2 Validate Failed"
        exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes",position=0);
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Delete Failed"
        exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfTwo');
    if retval != 0:
        print "VBRIF2 Portmap Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',presence="yes",position=0);
    if retval != 0:
        print "VBRIF2 Portmap Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',position=0)
    if retval != 0:
        print "After Create VBR1 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
#.........这里部分代码省略.........

开发者ID:Ei5enheim，项目名称:vtn，代码行数:101，代码来源:vbrif_portmap_audit.py

示例9: test_vtermif_flowfilter_drop_audit

def test_vtermif_flowfilter_drop_audit():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 5 : VTERMIF->AUDIT FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval = vtn_vterm.create_vterm('VtnOne','VTermOne','ControllerFirst')
  if retval != 0:
    print "VTERM Create Failed"
    exit(1)

  retval = vtermif_portmap.create_vtermif('VtnOne','VTermOne','VTermIfOne')
  if retval != 0:
    print "VTERMIF Create Failed"
    exit(1)
    retval=flowlistentry.create_flowlist('FlowlistOne')

  retval = vtermif_portmap.create_portmap('VtnOne','VTermOne','VTermIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilterEntry Create Failed"
    exit(1)
  print "****UPDATE Controller IP to invalid****"
#.........这里部分代码省略.........

开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:vterm_flowfilter_audit.py

示例10: test_audit_vtn_vbr_vbrif_portmap

def test_audit_vtn_vbr_vbrif_portmap():

    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 4 :Controller Create Failed"
        exit(1)

    print "TEST 4 : Test Audit with VTenant one VBridge one VBRIF and One PORTMAP"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)
    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
    if retval != 0:
        print "Portmap Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no");
    if retval != 0:
        print "After Delete Portmap Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0)
    if retval != 0:
        print "After Delete VBRIF Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
#.........这里部分代码省略.........

开发者ID:Ei5enheim，项目名称:vtn，代码行数:101，代码来源:vbrif_portmap_audit.py

示例11: test_audit_vtn_multi_vbr_vbrif

def test_audit_vtn_multi_vbr_vbrif():
    print "CREATE Controller"
    print "VTNONE->VBRONE->VBRIFONE/VBRIFTHREE"
    print "VTNONE->VBRTWO->VBRIFTWO/VBRIFFOUR"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        exit(1)

    print "TEST 3 : Audit One vtn and Two VBridges with Two Interfaces each"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
    if retval != 0:
        print "VBR2 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "VBRIF1 Validate Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfOne')
    if retval != 0:
        print "VBR2->VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "VBR2->VBRIF2 Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBR1->VBRIF1 Delete Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrTwo','VbrIfOne')
    if retval != 0:
        print "VBR2->VBRIF1 Delete Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfThree')
    if retval != 0:
        print "VBRIF3 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
    if retval != 0:
        print "VBR2->VBRIF2 Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfThree','ControllerFirst',position=0)
    if retval != 0:
        print "VBRIF3 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',position=0)
#.........这里部分代码省略.........

开发者ID:Ei5enheim，项目名称:vtn，代码行数:101，代码来源:vbrif_portmap_audit.py

示例12: update_vbr_flowlist

def update_vbr_flowlist():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print 'TEST 3 : VBR->FLOWLISTTEST:Update the VbrFlowListEntry'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)
  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)
  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)
  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)
  retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
  if retval != 0:
     print "Portmap Validate Failed"
     exit(1)

  retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',presence="yes");
  if retval != 0:
     print "Portmap Validate Failed"
     exit(1)
  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence="yes", position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)


  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

#.........这里部分代码省略.........

开发者ID:VamsikrishnaNallabothu，项目名称:vtn，代码行数:101，代码来源:vbr_flowfilter.py

示例13: negative_vbrif_flowfilter_out

def negative_vbrif_flowfilter_out():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 1 : VBRIF->Negative test scenario FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VBR Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python utils.restore_session函数代码示例发布时间：2022-05-26

Python vbrif_portmap.create_vbrif函数代码示例发布时间：2022-05-26

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13952|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10293|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4184|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4066|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3892|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3541|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3072|2022-01-22

8 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2736|2022-01-22

9 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2683|2022-05-25

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2352|2022-01-22

客服电话

电子邮件

Python vbrif_portmap.validate_vbrif_at_controller函数代码示例

示例1: update_vbr_flowfilter_drop

示例2: negative_vbr_flowfilter

示例3: test_vbr_flowfilter_pass

示例4: update_vbrif_flowfilter_pass_audit

示例5: test_vbr_flowfilter_audit_1

示例6: test_vtn_mininet_ping_demo1

示例7: test_multi_ctr_mininet_ping

示例8: test_audit_vtn_vbr_multi_vbrif_portmap

示例9: test_vtermif_flowfilter_drop_audit

示例10: test_audit_vtn_vbr_vbrif_portmap

示例11: test_audit_vtn_multi_vbr_vbrif

示例12: update_vbr_flowlist

示例13: negative_vbrif_flowfilter_out

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053