• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

Python vbrif_portmap.create_portmap函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Python中vbrif_portmap.create_portmap函数的典型用法代码示例。如果您正苦于以下问题：Python create_portmap函数的具体用法？Python create_portmap怎么用？Python create_portmap使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了create_portmap函数的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: update_vbrif_flowfilter_pass_audit

def update_vbrif_flowfilter_pass_audit():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 4 : VBRIF->Update AUDIT FLOWFILTER DROP TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  print "****UPDATE Controller IP to invalid****"
  test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
  retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
  if retval != 0:
    print "controller invalid_ip update failed"
    exit(1)
  # Delay for AUDIT
  retval = controller.wait_until_state('ControllerFirst',"down")
  if retval != 0:
    print "controller state change failed"
    exit(1)



  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
  if retval != 0:
#.........这里部分代码省略.........
开发者ID:opendaylight，项目名称:vtn，代码行数:101，代码来源:vbrif_flowfilter_audit.py


示例2: test_vtn_mininet_ping_demo1

def test_vtn_mininet_ping_demo1():

    print """TEST 1 : One vtn and one VBridge with Two Interfaces one Portmap each
    send packets between two configured host(H1,H3)"""
    print "CREATE Controller"
    print "VTNONE->VBRONE->VBRIFONE->PORTMAP"
    print "VTNONE->VBRONE->VBRIFTWO->PORTMAP"

    child = create_mininet_topology('MININETONE', 'ControllerFirst', '2')
    if child.isalive() == True :
        print "Topology creation Success!!!"
    else:
        print "Topology creation Failed"
        close_topology(child)
        exit(1)

    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 1 :Controller Create Failed"
        close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
    if retval != 0:
        print "VBRIFONE Create Failed"
        close_topology(child)
        exit(1)
    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', position=0)
    if retval != 0:
        print "VBRIFONE Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VBRIFTWO Create Failed"
        close_topology(child)
        exit(1)
    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
    if retval != 0:
        print "VBRIFTWO Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfOne', vlan_tagged=0);
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfTwo', vlan_tagged=0);
    if retval != 0:
        print "VBRIF2 Portmap Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF2 Portmap Validate Failed"
        close_topology(child)
        exit(1)

    retval = ping_mininet (child,'h1','h3')
    if retval != 0:
        print "MININET PING FAILED"

    close_topology(child)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        close_topology(child)
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
#.........这里部分代码省略.........
开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:mininet_test.py


示例3: test_multi_ctr_mininet_ping

def test_multi_ctr_mininet_ping():
    child = create_multicontroller_mininet_topology('MININETONE')
    if child.isalive() == True :
        print "Topology creation Success!!!"
    else:
        print "Topology creation Failed"
        mininet_test.mininet_test.close_topology(child)
        exit(1)

    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = create_boundary('BOUNDARY', 'ControllerFirst', 'ControllerSecond')
    if retval != 0:
        print "Boundary  Create Failed"
        mininet_test.close_topology(child)
        exit(1)
    retval = validate_boundary('BOUNDARY', presence="yes", position=0)
    if retval != 0:
        print "Boundary  Validate  Failed after create"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerSecond')
    if retval != 0:
        print "VBRTWO Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', position=0)
    if retval != 0:
        print "VBRIFONE Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
    if retval != 0:
        print "VBRIFTWO Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', vlan_tagged=0);
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree')
    if retval != 0:
        print "VBRIFTHREE Create Failed"
        mininet_test.close_topology(child)
#.........这里部分代码省略.........
开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:multi_ctr_mininet.py


示例4: test_vbrif_flowfilter_1

def test_vbrif_flowfilter_1():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 1 : VBRIF->FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
#.........这里部分代码省略.........
开发者ID:SeungWookJang，项目名称:vtn-coordinator，代码行数:101，代码来源:vbrif_flowfilter.py


示例5: test_vbr_flowfilter_audit_2

def test_vbr_flowfilter_audit_2():

    print "****CREATE Controller with valid IP****"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    print """TEST 2 : create VTN FLOWFILTER when controller is up
             delete the flowfilter change the controller status to
             down trigger Audit and validate"""

    print "****Create VTN****"
    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    print "****Create VBR****"
    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
    if retval != 0:
      print "VTN Create Failed"
      exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
    if retval != 0:
      print "VBRIF Create Failed"
      exit(1)
    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
      print "Portmap Create Failed"
      exit(1)
    retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
    if retval != 0:
      print "Portmap Create Failed"
      exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)
    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
    if retval != 0:
      print "Portmap Validate Failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',presence="yes");
    if retval != 0:
      print "Portmap Validate Failed"
      exit(1)

    retval=flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilter Create Failed"
        exit(1)

    retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilterEntry Create Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', presence='yes', position=0)
    if retval != 0:
        print "VBRFlowFilterEntry Validate Failed at Co-ordinator"
        exit(1)
#.........这里部分代码省略.........
开发者ID:VamsikrishnaNallabothu，项目名称:vtn，代码行数:101，代码来源:vbr_flowfilter_audit.py


示例6: test_vtermif_flowfilter_drop_audit

def test_vtermif_flowfilter_drop_audit():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 5 : VTERMIF->AUDIT FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval = vtn_vterm.create_vterm('VtnOne','VTermOne','ControllerFirst')
  if retval != 0:
    print "VTERM Create Failed"
    exit(1)

  retval = vtermif_portmap.create_vtermif('VtnOne','VTermOne','VTermIfOne')
  if retval != 0:
    print "VTERMIF Create Failed"
    exit(1)
    retval=flowlistentry.create_flowlist('FlowlistOne')

  retval = vtermif_portmap.create_portmap('VtnOne','VTermOne','VTermIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilterEntry Create Failed"
    exit(1)
  print "****UPDATE Controller IP to invalid****"
#.........这里部分代码省略.........
开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:vterm_flowfilter_audit.py


示例7: test_audit_vtn_vbr_multi_vbrif_portmap

def test_audit_vtn_vbr_multi_vbrif_portmap():
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 6 :Controller Create Failed"
        exit(1)

    print "TEST 6 : VTenant with one VBridge Two VBRIF1/VBRIF2 and One PORTMAP in VBRIF1"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfTwo')
    if retval != 0:
        print "VBRIF2 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "After Create VBRIF1 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',position=1)
    if retval != 0:
        print "After Create VBRIF2 Validate Failed"
        exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes",position=0);
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Delete Failed"
        exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfTwo');
    if retval != 0:
        print "VBRIF2 Portmap Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',presence="yes",position=0);
    if retval != 0:
        print "VBRIF2 Portmap Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',position=0)
    if retval != 0:
        print "After Create VBR1 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
#.........这里部分代码省略.........
开发者ID:Ei5enheim，项目名称:vtn，代码行数:101，代码来源:vbrif_portmap_audit.py


示例8: test_audit_vtn_vbr_vbrif_portmap

def test_audit_vtn_vbr_vbrif_portmap():

    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 4 :Controller Create Failed"
        exit(1)

    print "TEST 4 : Test Audit with VTenant one VBridge one VBRIF and One PORTMAP"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)
    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
    if retval != 0:
        print "Portmap Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no");
    if retval != 0:
        print "After Delete Portmap Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0)
    if retval != 0:
        print "After Delete VBRIF Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
#.........这里部分代码省略.........
开发者ID:Ei5enheim，项目名称:vtn，代码行数:101，代码来源:vbrif_portmap_audit.py


示例9: negative_vbr_flowfilter

def negative_vbr_flowfilter():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)
  print "Negative test scenario test cases"
  print 'TEST 3 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone negative  the VbrFlowFilterEntry to vbrthree'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)
  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)
  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)
  retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
  if retval != 0:
     print "Portmap Validate Failed"
     exit(1)

  retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',presence="yes");
  if retval != 0:
     print "Portmap Validate Failed"
     exit(1)


  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
#.........这里部分代码省略.........
开发者ID:VamsikrishnaNallabothu，项目名称:vtn，代码行数:101，代码来源:vbr_flowfilter.py


示例10: negative_vbrif_flowfilter_out

def negative_vbrif_flowfilter_out():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 1 : VBRIF->Negative test scenario FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VBR Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOneOut', presence='yes', position=0)
#.........这里部分代码省略.........
开发者ID:OnStack，项目名称:cloudexchange，代码行数:101，代码来源:vbrif_flowfilter.py



注：本文中的vbrif_portmap.create_portmap函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
Python vbrif_portmap.create_vbrif函数代码示例发布时间：2022-05-26
下一篇：
Python vasp.Vasp类代码示例发布时间：2022-05-26
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap