• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

Python utilities.log_start_test_code函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Python中utilities.log_start_test_code函数的典型用法代码示例。如果您正苦于以下问题:Python log_start_test_code函数的具体用法?Python log_start_test_code怎么用?Python log_start_test_code使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了log_start_test_code函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: test_exchange_additional_URL_normal

    def test_exchange_additional_URL_normal(self):
        """Test replacing an URL."""
        log_new_test_case("test_exchange_additional_URL_normal")

        # Test variables
        testhandle = self.handle_withloc
        old = 'http://first.foo'
        new = 'http://newfirst.foo'

        # Precondition: URL must be included.
        handlerecord_json = self.inst.retrieve_handle_record_json(testhandle)
        contained = self.inst.is_URL_contained_in_10320LOC(testhandle, old, handlerecord_json)
        self.assertTrue(contained,
            'Precondition for test failed! The URL should be present at the start'
            ' of the test: '+str(handlerecord_json))

        # Run the code to be tested:
        log_start_test_code()
        self.inst.exchange_additional_URL(testhandle, old, new)
        log_end_test_code()

        # Check desired effects on handle:
        contained = self.inst.is_URL_contained_in_10320LOC(testhandle, new)
        self.assertTrue(contained,
            'After replacing an URL, the replacement was not there.')
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:25,代码来源:handleclient_writeaccess_10320_test.py


示例2: test_remove_additional_URL_several

    def test_remove_additional_URL_several(self):
        """Test removing all URL at the same time, which should remove the whole 10320/LOC attribute."""
        log_new_test_case("test_remove_additional_URL_several")

        # Test variables
        testhandle = self.handle_withloc
        url1 =  'http://first.foo'
        url2 = 'http://second.foo'

        # Run code to be tested:
        log_start_test_code()
        self.inst.remove_additional_URL(testhandle, url1, url2)
        log_end_test_code()

        # Check desired effects on handle:
        # Check if empty:
        isempty = self.inst.is_10320LOC_empty(testhandle)
        self.assertTrue(isempty,
            'After removing all URLs from 10320/LOC, it is not empty.')
        # Check if still exists:
        rec = self.inst.retrieve_handle_record_json(testhandle)
        val = self.inst.get_value_from_handle(testhandle, '10320/LOC', rec)
        indices = self.inst.get_handlerecord_indices_for_key('10320/LOC', rec['values'])
        self.assertIsNone(val,
            'After removing all URLs from 10320/LOC, the value is not None.')
        self.assertEqual(len(indices), 0,
            'After removing all URLs from 10320/LOC, the entry still exists.')
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:27,代码来源:handleclient_writeaccess_10320_test.py


示例3: test_modify_handle_value_several

    def test_modify_handle_value_several(self):
        """Test modifying several existing handle values."""
        log_new_test_case("test_modify_handle_value_several")

        # Test variables
        testhandle = self.handle

        # Run code to be tested:
        log_start_test_code()
        self.inst.modify_handle_value(testhandle,
                                      test4='new4',
                                      test2='new2',
                                      test3='new3')
        log_end_test_code()

        # Check desired effects on handle:
        # check if three values were modified:
        rec = self.inst.retrieve_handle_record_json(testhandle)
        val2 = self.inst.get_value_from_handle(testhandle, 'test2', rec)
        val3 = self.inst.get_value_from_handle(testhandle, 'test3', rec)
        val4 = self.inst.get_value_from_handle(testhandle, 'test4', rec)
        self.assertEqual(val2, 'new2',
            'The value of "test2" was not changed to "new2".')
        self.assertEqual(val3, 'new3',
            'The value of "test3" was not changed to "new3".')
        self.assertEqual(val4, 'new4',
            'The value of "test4" was not changed to "new4".')

        # check if one value remained unchanged:
        val1 = self.inst.get_value_from_handle(testhandle, 'test1', rec)
        self.assertEqual(val1, 'val1',
            'The value of "test1" should still be "val1".')
开发者ID:TonyWildish,项目名称:B2HANDLE,代码行数:32,代码来源:handleclient_writeaccess_test.py


示例4: test_search_handle_prefixfilter

    def test_search_handle_prefixfilter(self):
        """Test filtering for prefixes."""
        log_new_test_case("test_search_handle_prefixfilter")

        prefix1 = self.prefix_inexistent
        prefix2 = self.handle.split('/')[0]

        log_start_test_code()
        val1 = self.inst.search_handle(URL='*dkrz*', prefix=prefix1)
        log_end_test_code()
        log_start_test_code()
        val2 = self.inst.search_handle(URL='*dkrz*', prefix=prefix2)
        log_end_test_code()

        # Check desired outcome:
        self.assertEqual(type(val1),type([]),
            'Searching did not return a list, but: '+str(val1)+', type: '+str(type(val1)))
        for item in val1:
            self.assertEqual(item.split('/')[0], prefix1,
                'This search result has the wrong prefix: '+item+', should be '+prefix1)

        self.assertEqual(type(val2),type([]),
            'Searching did not return a list, but: '+str(val1)+', type: '+str(type(val1)))
        for item in val2:
            self.assertEqual(item.split('/')[0], prefix2,
                'This search result has the wrong prefix: '+item+', should be '+prefix2)
开发者ID:TonyWildish,项目名称:B2HANDLE,代码行数:26,代码来源:handleclient_searchaccess_test.py


示例5: test_modify_handle_value_one

    def test_modify_handle_value_one(self):
        """Test modifying one existing handle value."""
        log_new_test_case("test_modify_handle_value_one")

        # Test variables
        testhandle = self.handle

        # Run code to be tested:
        log_start_test_code()
        self.inst.modify_handle_value(testhandle, TEST4='newvalue')
        log_end_test_code()

        # Check desired effects on handle:
        # check if one was modified:
        rec = self.inst.retrieve_handle_record_json(testhandle)
        val = self.inst.get_value_from_handle(testhandle, 'TEST4', rec)
        self.assertEqual(val, 'newvalue',
            'The value did not change.')

        # check if others still there:
        val1 = self.inst.get_value_from_handle(testhandle, 'TEST1', rec)
        val2 = self.inst.get_value_from_handle(testhandle, 'TEST2', rec)
        self.assertEqual(val1, 'val1',
            'The value of "TEST1" should still be "val1".')
        self.assertEqual(val2, 'val2',
            'The value of "TEST2" should still be "val2".')
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:26,代码来源:handleclient_writeaccess_test.py


示例6: test_delete_handle_value_several_entries

    def test_delete_handle_value_several_entries(self):
        """Test deleting several entries from a record."""
        log_new_test_case("test_delete_handle_value_several_entries")

        # Test variables
        testhandle = self.handle

        # Run code to be tested:
        log_start_test_code()
        self.inst.delete_handle_value(testhandle, ['TEST1', 'TEST2'])
        log_end_test_code()

        # Check desired effects on handle:
        rec = self.inst.retrieve_handle_record_json(testhandle)
        val1 = self.inst.get_value_from_handle(testhandle, 'TEST1', rec)
        val2 = self.inst.get_value_from_handle(testhandle, 'TEST2', rec)
        indices1 = self.inst.get_handlerecord_indices_for_key('TEST1', rec['values'])
        indices2 = self.inst.get_handlerecord_indices_for_key('TEST2', rec['values'])

        self.assertIsNone(val1,
            'The value for the deleted entry should be None.')
        self.assertIsNone(val2,
            'The value for the deleted entry should be None.')
        self.assertEqual(len(indices1), 0,
            'There should be no index for the deleted entry.')
        self.assertEqual(len(indices2), 0,
            'There should be no index for the deleted entry.')
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:27,代码来源:handleclient_writeaccess_test.py


示例7: test_add_additional_URL_alreadythere

    def test_add_additional_URL_alreadythere(self):
        """Test adding an URL that is already there."""
        log_new_test_case("test_add_additional_URL_alreadythere")

        # Test variables
        testhandle = self.handle_withloc
        url = 'http://first.foo'

        # Precondition: URL is already contained:
        record_before = self.inst.retrieve_handle_record_json(testhandle)
        contained = self.inst.is_URL_contained_in_10320LOC(testhandle, url, record_before)
        self.assertTrue(contained,
            'Test precondition failed: URL not there: '+str(record_before))

        # Run code to be tested:
        log_start_test_code()
        self.inst.add_additional_URL(testhandle, url)
        log_end_test_code()

        # Check desired effects on handle:
        # i.e. check if something has changed
        record_after  = self.inst.retrieve_handle_record_json(testhandle)
        self.assertEqual(record_before, record_after,
                        'After adding the same URL again, '
                        'the record was not equal.\n'
                        'Before:\n'+str(record_before)+'\n'
                        'After:\n'+str(record_after))
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:27,代码来源:handleclient_writeaccess_10320_test.py


示例8: test_modify_handle_value_several_inexistent

    def test_modify_handle_value_several_inexistent(self):
        """Test modifying several existing handle values, one of them inexistent."""
        log_new_test_case("test_modify_handle_value_several_inexistent")
        
        # Test variables
        testhandle = self.handle

        # Run code to be tested:
        log_start_test_code()
        self.inst.modify_handle_value(testhandle,
                                      TEST4='new4',
                                      TEST2='new2',
                                      TEST100='new100')
        log_end_test_code()

        # Check desired effects on handle:
        # check if three values were modified:
        rec = self.inst.retrieve_handle_record_json(testhandle)
        val2   = self.inst.get_value_from_handle(testhandle, 'TEST2', rec)
        val100 = self.inst.get_value_from_handle(testhandle, 'TEST100', rec)
        val4   = self.inst.get_value_from_handle(testhandle, 'TEST4', rec)
        self.assertEqual(val100, 'new100',
            'The value of "TEST100" was not created and set to "new100".')
        self.assertEqual(val2, 'new2',
            'The value of "TEST2" was not changed to "new2".')
        self.assertEqual(val4, 'new4',
            'The value of "TEST4" was not changed to "new4".')

        # check if one value remained unchanged:
        val1 = self.inst.get_value_from_handle(testhandle, 'TEST1', rec)
        self.assertEqual(val1, 'val1',
            'The value of "TEST1" should still be "val1".')
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:32,代码来源:handleclient_writeaccess_test.py


示例9: test_add_additional_URL_several

    def test_add_additional_URL_several(self):
        """Test adding several (3) additional URLs."""
        log_new_test_case("test_add_additional_URL_several")

        # Test variables
        testhandle = self.handle_withloc
        url1 = 'http://one'
        url2 = 'http://two'
        url3 = 'http://three'
        
        # Run code to be tested:
        log_start_test_code()
        self.inst.add_additional_URL(testhandle, url1, url2, url3)
        log_end_test_code()

        # Check desired effects on handle:
        contained1 = self.inst.is_URL_contained_in_10320LOC(testhandle, url1)
        contained2 = self.inst.is_URL_contained_in_10320LOC(testhandle, url2)
        contained3 = self.inst.is_URL_contained_in_10320LOC(testhandle, url3)
        self.assertTrue(contained1,
            'The first added URL was not added.')
        self.assertTrue(contained2,
            'The second added URL was not added.')
        self.assertTrue(contained3,
            'The third added URL was not added.')
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:25,代码来源:handleclient_writeaccess_10320_test.py


示例10: test_register_handle

    def test_register_handle(self):
        """Test registering a new handle with various types of values."""
        log_new_test_case("test_register_handle")

        # Test variables
        testhandle = self.newhandle
        additional_URLs = ['http://bar.bar', 'http://foo.foo']

        # Run code to be tested:
        log_start_test_code()
        handle_returned = self.inst.register_handle(testhandle,
                                                    location='http://foo.bar',
                                                    checksum='123456',
                                                    additional_URLs=additional_URLs,
                                                    FOO='foo',
                                                    BAR='bar')
        log_end_test_code()

        # Check desired effects on handle:
        # Check if content was written ok:
        rec = self.inst.retrieve_handle_record_json(testhandle)
        val1 = self.inst.get_value_from_handle(testhandle, 'BAR', rec)
        val2 = self.inst.get_value_from_handle(testhandle, 'FOO', rec)
        val3 = self.inst.get_value_from_handle(testhandle, 'URL', rec)
        val4 = self.inst.get_value_from_handle(testhandle, 'CHECKSUM', rec)
        contained1 = self.inst.is_URL_contained_in_10320LOC(testhandle, 'http://bar.bar', rec)
        contained2 = self.inst.is_URL_contained_in_10320LOC(testhandle, 'http://foo.foo', rec)

        self.assertEqual(handle_returned, testhandle,
            'The handle returned by the create-method was not the one passed to it.')
        self.assertEqual(val1, 'bar',
            'The value "bar" was not inserted.')
        self.assertEqual(val2, 'foo',
            'The value "foo" was not inserted.')
        self.assertEqual(val3, 'http://foo.bar',
            'The value "http://foo.bar" was not inserted.')
        self.assertEqual(val4, '123456',
            'The value "123456" was not inserted.')
        self.assertTrue(contained1,
            'A specified additional URL was not inserted.')
        self.assertTrue(contained2,
            'A specified additional URL was not inserted.')

        # Delete again (and check if was deleted):
        handle = self.newhandle
        url = self.connector.make_handle_URL(self.newhandle)
        head = self.headers
        veri = self.https_verify
        resp = requests.delete(url, headers=head, verify=veri)
        log_request_response_to_file('DELETE', handle, url, head, veri, resp)
        rec = self.inst.retrieve_handle_record_json(self.newhandle)

        self.assertEqual(resp.status_code, 200,
            'Deleting did not return a HTTP 200 code.')
        self.assertIsNone(rec,
            'The deleted record should return None.')
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:56,代码来源:handleclient_writeaccess_test.py


示例11: test_modify_handle_value_corrupted

    def test_modify_handle_value_corrupted(self):
        """Test exception when trying to modify corrupted handle record."""
        log_new_test_case("test_modify_handle_value_corrupted")

        # Test variables
        testhandle = self.handle
        head = self.headers
        url = self.connector.make_handle_URL(testhandle)
        # Create corrupted record:
        list_of_all_entries = [
            {
                "index":111,
                "type": "TEST1",
                "data":{
                    "format":"string",
                    "value":"val1"
                }
            },
            {
                "index":2222,
                "type": "TEST2",
                "data":{
                    "format":"string",
                    "value":"val2"
                }
            },
            {
                "index":333,
                "type": "TEST2",
                "data":{
                    "format":"string",
                    "value":"val3"
                }
            },
            {
                "index":4,
                "type": "TEST4",
                "data":{
                    "format":"string",
                    "value":"val4"
                }
            }
        ]
        data = json.dumps({'values':list_of_all_entries})
        veri = self.https_verify
        resp = requests.put(url, data=data, headers=head, verify=veri)
        log_request_response_to_file('PUT', testhandle, url, head, veri, resp, data)

        # Run code to be tested + check exception:
        log_start_test_code()
        with self.assertRaises(BrokenHandleRecordException):
            self.inst.modify_handle_value(testhandle,
                                          TEST4='new4',
                                          TEST2='new2',
                                          TEST3='new3')
        log_end_test_code()
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:56,代码来源:handleclient_writeaccess_test.py


示例12: test_search_handle_for_url_and_CHECKSUM

    def test_search_handle_for_url_and_CHECKSUM(self):
        """Test searching for url and checksum with wildcards."""
        log_new_test_case("test_search_handle_for_url_and_CHECKSUM")

        log_start_test_code()
        with self.assertRaises(ReverseLookupException):
            val1 = self.inst.search_handle('*dkrz*', CHECKSUM='*123*')
            log_end_test_code()
            log_start_test_code()
            val2 = self.inst.search_handle(URL='*dkrz*', CHECKSUM='*123*')
        log_end_test_code()
开发者ID:TonyWildish,项目名称:B2HANDLE,代码行数:11,代码来源:handleclient_searchaccess_test.py


示例13: test_generate_and_register_handle

    def test_generate_and_register_handle(self):
        """Test generating and registering a new handle with various types of values."""
        log_new_test_case("test_generate_and_register_handle")

        # Test variables
        additional_URLs = ['http://bar.bar', 'http://foo.foo']
        prefix = self.prefix

        # Run code to be tested:
        log_start_test_code()
        handle_returned = self.inst.generate_and_register_handle(prefix=prefix,
                                                    location='http://foo.bar',
                                                    checksum='123456',
                                                    additional_URLs=additional_URLs,
                                                    foo='foo',
                                                    bar='bar')
        log_end_test_code()

        # Check desired effects on handle:
        rec = self.inst.retrieve_handle_record_json(handle_returned)
        val1 = self.inst.get_value_from_handle(handle_returned, 'bar', rec)
        val2 = self.inst.get_value_from_handle(handle_returned, 'foo', rec)
        val3 = self.inst.get_value_from_handle(handle_returned, 'URL', rec)
        val4 = self.inst.get_value_from_handle(handle_returned, 'checksum', rec)
        contained1 = self.inst.is_URL_contained_in_10320LOC(handle_returned, 'http://bar.bar', rec)
        contained2 = self.inst.is_URL_contained_in_10320LOC(handle_returned, 'http://foo.foo', rec)

        self.assertEqual(val1, 'bar',
            'The value "bar" was not inserted.')
        self.assertEqual(val2, 'foo',
            'The value "foo" was not inserted.')
        self.assertEqual(val3, 'http://foo.bar',
            'The value "http://foo.bar" was not inserted.')
        self.assertEqual(val4, '123456',
            'The value "123456" was not inserted.')
        self.assertTrue(contained1,
            'A specified additional URL was not inserted.')
        self.assertTrue(contained2,
            'A specified additional URL was not inserted.')
        self.assertIn(prefix, handle_returned,
            'The returned handle does not contain the given prefix.')

        # Delete again (and check if was deleted):
        url = self.inst.make_handle_URL(handle_returned)
        head = self.headers
        veri = self.https_verify
        resp = requests.delete(url, headers=head, verify=veri)
        log_request_response_to_file('DELETE', handle_returned, url, head, veri, resp)
        rec = self.inst.retrieve_handle_record_json(handle_returned)

        self.assertEqual(resp.status_code, 200,
            'Deleting did not return a HTTP 200 code.')
        self.assertIsNone(rec,
            'The deleted record should return None.')
开发者ID:TonyWildish,项目名称:B2HANDLE,代码行数:54,代码来源:handleclient_writeaccess_test.py


示例14: test_modify_handle_value_HS_ADMIN

    def test_modify_handle_value_HS_ADMIN(self):
        """Test exception when trying to modify HS_ADMIN."""
        log_new_test_case("test_modify_handle_value_HS_ADMIN")

        # Test variables
        testhandle = self.handle

        # Run code to be tested + check exception:
        log_start_test_code()
        with self.assertRaises(IllegalOperationException):
            self.inst.modify_handle_value(testhandle, HS_ADMIN='please let me in!')
        log_end_test_code()
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:12,代码来源:handleclient_writeaccess_test.py


示例15: test_delete_handle_too_many_args

    def test_delete_handle_too_many_args(self):
        """Test deleting an entire record, but we pass more arguments to the method."""
        log_new_test_case("test_delete_handle_too_many_args")

        # Test variables
        testhandle = self.handle

        # Run code to be tested + check exception:
        log_start_test_code()
        with self.assertRaises(TypeError):
            self.inst.delete_handle(testhandle, 'TEST1')
        log_end_test_code()
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:12,代码来源:handleclient_writeaccess_test.py


示例16: test_remove_additional_URL_inexistent_handle

    def test_remove_additional_URL_inexistent_handle(self):
        """Test normal removal of additional URL from an inexistent handle."""
        log_new_test_case("test_remove_additional_URL_inexistent_handle")

        # Test variables
        testhandle = self.inexistent_handle
        url = 'http://first.foo'

        # Run code to be tested + check exception:
        log_start_test_code()
        with self.assertRaises(HandleNotFoundException):
            self.inst.remove_additional_URL(testhandle, url)
        log_end_test_code()
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:13,代码来源:handleclient_writeaccess_10320_test.py


示例17: test_add_additional_URL_to_inexistent_handle

    def test_add_additional_URL_to_inexistent_handle(self):
        """Test exception if handle does not exist."""
        log_new_test_case("test_add_additional_URL_to_inexistent_handle")

        # Test variables
        testhandle = self.inexistent_handle
        url = 'http://foo.foo'

        # Run code to be tested + check exception:
        log_start_test_code()
        with self.assertRaises(HandleNotFoundException):
            self.inst.add_additional_URL(testhandle, url)
        log_end_test_code()
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:13,代码来源:handleclient_writeaccess_10320_test.py


示例18: test_modify_handle_value_without_authentication

    def test_modify_handle_value_without_authentication(self):
        """Test if exception when not authenticated."""
        log_new_test_case("test_modify_handle_value_without_authentication")

        # Test variables
        testhandle = self.handle
        inst_readonly = EUDATHandleClient(self.url, HTTPS_verify=self.https_verify)

        # Run code to be tested + check exception:
        log_start_test_code()
        with self.assertRaises(HandleAuthenticationError):
            inst_readonly.modify_handle_value(testhandle, foo='bar')
        log_end_test_code()
开发者ID:NicolasLiampotis,项目名称:B2HANDLE,代码行数:13,代码来源:handleclient_writeaccess_test.py


示例19: test_search_handle_emptylist

    def test_search_handle_emptylist(self):
        """Test empty search result."""
        log_new_test_case("test_search_handle_emptylist")

        log_start_test_code()
        val = self.inst.search_handle(URL=self.url_inexistent)
        log_end_test_code()

        # Check desired outcome:
        self.assertEqual(type(val),type([]),
            'Searching did not return a list, but: '+str(val)+', type: '+str(type(val)))
        self.assertEqual(len(val),0,
            'Searching did not return an empty list, but: '+str(val))
开发者ID:TonyWildish,项目名称:B2HANDLE,代码行数:13,代码来源:handleclient_searchaccess_test.py


示例20: test_search_handle

    def test_search_handle(self):
        """Test searching for handles with any url (server should return list of handles)."""
        log_new_test_case("test_search_handle")

        log_start_test_code()
        val = self.inst.search_handle(URL='*')
        log_end_test_code()

        # Check desired outcome:
        self.assertEqual(type(val),type([]),
            'Searching did not return a list, but: '+str(val))
        self.assertTrue(len(val) > 0,
            'Searching did not return any handles!')
        self.assertTrue(self.inst.check_handle_syntax(val[0]),
            'Searching returned handles with a wrong syntax, e.g.: '+str(val[0]))
开发者ID:TonyWildish,项目名称:B2HANDLE,代码行数:15,代码来源:handleclient_searchaccess_test.py



注:本文中的utilities.log_start_test_code函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Python utilities.mapSettingsString函数代码示例发布时间:2022-05-26
下一篇:
Python utilities.log_new_test_case函数代码示例发布时间:2022-05-26
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap