Python profile.putPreference函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中util.profile.putPreference函数的典型用法代码示例。如果您正苦于以下问题：Python putPreference函数的具体用法？Python putPreference怎么用？Python putPreference使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了putPreference函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: init

	def __init__(self, parent):
		super(UltimakerCalibrateStepsPerEPage, self).__init__(parent, "Ultimaker Calibration")

		if profile.getPreference('steps_per_e') == '0':
			profile.putPreference('steps_per_e', '865.888')
		
		self.AddText("Calibrating the Steps Per E requires some manual actions.")
		self.AddText("First remove any filament from your machine.")
		self.AddText("Next put in your filament so the tip is aligned with the\ntop of the extruder drive.")
		self.AddText("We'll push the filament 100mm")
		self.extrudeButton = self.AddButton("Extrude 100mm filament")
		self.AddText("Now measure the amount of extruded filament:\n(this can be more or less then 100mm)")
		p = wx.Panel(self)
		p.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
		self.lengthInput = wx.TextCtrl(p, -1, '100')
		p.GetSizer().Add(self.lengthInput, 0, wx.RIGHT, 8)
		self.saveLengthButton = wx.Button(p, -1, 'Save')
		p.GetSizer().Add(self.saveLengthButton, 0)
		self.GetSizer().Add(p, 0, wx.LEFT, 5)
		self.AddText("This results in the following steps per E:")
		self.stepsPerEInput = wx.TextCtrl(self, -1, profile.getPreference('steps_per_e'))
		self.GetSizer().Add(self.stepsPerEInput, 0, wx.LEFT, 5)
		self.AddText("You can repeat these steps to get better calibration.")
		self.AddSeperator()
		self.AddText("If you still have filament in your printer which needs\nheat to remove, press the heat up button below:")
		self.heatButton = self.AddButton("Heatup for filament removal")
		
		self.saveLengthButton.Bind(wx.EVT_BUTTON, self.OnSaveLengthClick)
		self.extrudeButton.Bind(wx.EVT_BUTTON, self.OnExtrudeClick)
		self.heatButton.Bind(wx.EVT_BUTTON, self.OnHeatClick)

开发者ID:custodian，项目名称:Cura，代码行数:30，代码来源:configWizard.py

示例2: main

def main():
	parser = OptionParser(usage="usage: %prog [options] <filename>.stl")
	parser.add_option("-i", "--ini", action="store", type="string", dest="profileini", help="Load settings from a profile ini file")
	parser.add_option("-P", "--project", action="store_true", dest="openprojectplanner", help="Open the project planner")
	parser.add_option("-F", "--flat", action="store_true", dest="openflatslicer", help="Open the 2D SVG slicer (unfinished)")
	parser.add_option("-r", "--print", action="store", type="string", dest="printfile", help="Open the printing interface, instead of the normal cura interface.")
	parser.add_option("-p", "--profile", action="store", type="string", dest="profile", help="Internal option, do not use!")
	parser.add_option("-s", "--slice", action="store_true", dest="slice", help="Slice the given files instead of opening them in Cura")
	(options, args) = parser.parse_args()
	if options.profile != None:
		profile.loadGlobalProfileFromString(options.profile)
	if options.profileini != None:
		profile.loadGlobalProfile(options.profileini)
	if options.openprojectplanner != None:
		from gui import projectPlanner
		projectPlanner.main()
		return
	if options.openflatslicer != None:
		from gui import flatSlicerWindow
		flatSlicerWindow.main()
		return
	if options.printfile != None:
		from gui import printWindow
		printWindow.startPrintInterface(options.printfile)
		return

	if options.slice != None:
		from util import sliceRun
		sliceRun.runSlice(args)
	else:
		if len(args) > 0:
			profile.putPreference('lastFile', ';'.join(args))
		from gui import splashScreen
		splashScreen.showSplash(mainWindowRunCallback)

开发者ID:PKartaviy，项目名称:Cura，代码行数:34，代码来源:cura.py

示例3: OnSettingChange

	def OnSettingChange(self, e):
		if self.type == 'profile':
			profile.putProfileSetting(self.configName, self.GetValue())
		else:
			profile.putPreference(self.configName, self.GetValue())
		result = validators.SUCCESS
		msgs = []
		for validator in self.validators:
			res, err = validator.validate()
			if res == validators.ERROR:
				result = res
			elif res == validators.WARNING and result != validators.ERROR:
				result = res
			if res != validators.SUCCESS:
				msgs.append(err)
		if result == validators.ERROR:
			self.ctrl.SetBackgroundColour('Red')
		elif result == validators.WARNING:
			self.ctrl.SetBackgroundColour('Yellow')
		else:
			self.ctrl.SetBackgroundColour(self.defaultBGColour)
		self.ctrl.Refresh()

		self.validationMsg = '\n'.join(msgs)
		self.panel.main.UpdatePopup(self)

开发者ID:CNCBASHER，项目名称:Cura，代码行数:25，代码来源:configBase.py

示例4: OnLoadModel

	def OnLoadModel(self, e):
		dlg=wx.FileDialog(self, "Open file to print", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
		dlg.SetWildcard("STL files (*.stl)|*.stl;*.STL")
		if dlg.ShowModal() == wx.ID_OK:
			self.filelist = [dlg.GetPath()]
			profile.putPreference('lastFile', ';'.join(self.filelist))
			self.preview3d.loadModelFiles(self.filelist)
			self.preview3d.setViewMode("Normal")
		dlg.Destroy()

开发者ID:felipesanches，项目名称:Cura，代码行数:9，代码来源:simpleMode.py

示例5: main

def main():
	#app = wx.App(False)
	if profile.getPreference('wizardDone') == 'False':
		configWizard.configWizard()
		profile.putPreference("wizardDone", "True")
	if profile.getPreference('startMode') == 'Simple':
		simpleMode.simpleModeWindow()
	else:
		mainWindow()

开发者ID:CNCBASHER，项目名称:Cura，代码行数:9，代码来源:mainWindow.py

示例6: OnDropFiles

	def OnDropFiles(self, filenames):
		for filename in filenames:
			item = ProjectObject(self, filename)
			profile.putPreference('lastFile', item.filename)
			self.list.append(item)
			self.selection = item
			self._updateListbox()
		self.OnListSelect(None)
		self.preview.Refresh()

开发者ID:custodian，项目名称:Cura，代码行数:9，代码来源:projectPlanner.py

示例7: OnAddModel

	def OnAddModel(self, e):
		dlg=wx.FileDialog(self, "Open file to batch slice", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST|wx.FD_MULTIPLE)
		dlg.SetWildcard("STL files (*.stl)|*.stl;*.STL")
		if dlg.ShowModal() == wx.ID_OK:
			for filename in dlg.GetPaths():
				profile.putPreference('lastFile', filename)
				self.list.append(filename)
				self.selection = filename
				self._updateListbox()
		dlg.Destroy()

开发者ID:custodian，项目名称:Cura，代码行数:10，代码来源:batchRun.py

示例8: main

def main():
    app = wx.App(False)
    if profile.getPreference("wizardDone") == "False":
        configWizard.configWizard()
        profile.putPreference("wizardDone", "True")
    if profile.getPreference("startMode") == "Simple":
        simpleMode.simpleModeWindow()
    else:
        mainWindow()
    app.MainLoop()

开发者ID:younew，项目名称:Cura，代码行数:10，代码来源:mainWindow.py

示例9: _showModelLoadDialog

	def _showModelLoadDialog(self, amount):
		filelist = []
		for i in xrange(0, amount):
			filelist.append(self._showOpenDialog("Open file to print"))
			if filelist[-1] == False:
				return
			self.SetTitle(filelist[-1] + ' - Cura - ' + version.getVersion())
		self.filelist = filelist
		profile.putPreference('lastFile', ';'.join(self.filelist))
		self.preview3d.loadModelFiles(self.filelist)
		self.preview3d.setViewMode("Normal")

开发者ID:felipesanches，项目名称:Cura，代码行数:11，代码来源:mainWindow.py

示例10: _showOpenDialog

	def _showOpenDialog(self, title, wildcard = meshLoader.wildcardFilter()):
		dlg=wx.FileDialog(self, title, os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
		dlg.SetWildcard(wildcard)
		if dlg.ShowModal() == wx.ID_OK:
			filename = dlg.GetPath()
			dlg.Destroy()
			if not(os.path.exists(filename)):
				return False
			profile.putPreference('lastFile', filename)
			return filename
		dlg.Destroy()
		return False

开发者ID:festlv，项目名称:Cura，代码行数:12，代码来源:mainWindow.py

示例11: OnAddModel

	def OnAddModel(self, e):
		dlg=wx.FileDialog(self, "Open file to print", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST|wx.FD_MULTIPLE)
		dlg.SetWildcard("STL files (*.stl)|*.stl;*.STL")
		if dlg.ShowModal() == wx.ID_OK:
			for filename in dlg.GetPaths():
				item = ProjectObject(self, filename)
				profile.putPreference('lastFile', item.filename)
				self.list.append(item)
				self.selection = item
				self._updateListbox()
				self.OnListSelect(None)
		self.preview.Refresh()
		dlg.Destroy()

开发者ID:custodian，项目名称:Cura，代码行数:13，代码来源:projectPlanner.py

示例12: onLoad

	def onLoad(self, event):

		dlg = wx.FileDialog(self, "Open file to print", style=wx.FD_OPEN | wx.FD_FILE_MUST_EXIST)
		dlg.SetWildcard(meshLoader.wildcardFilter())

		if dlg.ShowModal() == wx.ID_OK:
			frame = self.GetParent().GetParent().GetParent()
			frame.filename = dlg.GetPath() 
			frame.step5_panel.ClearPrintSummary()
			profile.putPreference('lastFile', frame.filename)
			transform = frame.step2_panel
			transform.load(frame.filename)
			frame.onNext(None)
		dlg.Destroy()

开发者ID:xtarn，项目名称:Cura-v2，代码行数:14，代码来源:LoadPanel.py

示例13: _showOpenDialog

 def _showOpenDialog(self, title, wildcard="STL files (*.stl)|*.stl;*.STL"):
     dlg = wx.FileDialog(
         self, title, os.path.split(profile.getPreference("lastFile"))[0], style=wx.FD_OPEN | wx.FD_FILE_MUST_EXIST
     )
     dlg.SetWildcard(wildcard)
     if dlg.ShowModal() == wx.ID_OK:
         filename = dlg.GetPath()
         dlg.Destroy()
         if not (os.path.exists(filename)):
             return False
         profile.putPreference("lastFile", filename)
         return filename
     dlg.Destroy()
     return False

开发者ID:younew，项目名称:Cura，代码行数:14，代码来源:mainWindow.py

示例14: StoreData

	def StoreData(self):
		profile.putPreference('machine_width', self.machineWidth.GetValue())
		profile.putPreference('machine_depth', self.machineDepth.GetValue())
		profile.putPreference('machine_height', self.machineHeight.GetValue())
		profile.putProfileSetting('nozzle_size', self.nozzleSize.GetValue())
		profile.putProfileSetting('machine_center_x', profile.getPreferenceFloat('machine_width') / 2)
		profile.putProfileSetting('machine_center_y', profile.getPreferenceFloat('machine_depth') / 2)
		profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
		profile.putPreference('has_heated_bed', str(self.heatedBed.GetValue()))

开发者ID:PKartaviy，项目名称:Cura，代码行数:9，代码来源:configWizard.py

示例15: main

def main(splash):
	#app = wx.App(False)
	if profile.getPreference('machine_type') == 'unknown':
		if platform.system() == "Darwin":
			#Check if we need to copy our examples
			exampleFile = os.path.expanduser('~/CuraExamples/UltimakerRobot_support.stl')
			if not os.path.isfile(exampleFile):
				try:
					os.makedirs(os.path.dirname(exampleFile))
				except:
					pass
				for filename in glob.glob(os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), '..', 'example', '*.*'))):
					shutil.copy(filename, os.path.join(os.path.dirname(exampleFile), os.path.basename(filename)))
				profile.putPreference('lastFile', exampleFile)
		splash.Show(False)
		configWizard.configWizard()
	if profile.getPreference('startMode') == 'Simple':
		simpleMode.simpleModeWindow()
	else:
		mainWindow()

开发者ID:flothesof，项目名称:Cura，代码行数:20，代码来源:mainWindow.py

示例16: init

	def __init__(self, port = None, baudrate = None, callbackObject = None):
		if port == None:
			port = profile.getPreference('serial_port')
		if baudrate == None:
			if profile.getPreference('serial_baud') == 'AUTO':
				baudrate = 0
			else:
				baudrate = int(profile.getPreference('serial_baud'))
		if callbackObject == None:
			callbackObject = MachineComPrintCallback()

		self._callback = callbackObject
		self._state = self.STATE_NONE
		self._serial = None
		self._baudrateDetectList = baudrateList()
		self._baudrateDetectRetry = 0
		self._temp = 0
		self._bedTemp = 0
		self._gcodeList = None
		self._gcodePos = 0
		self._commandQueue = queue.Queue()
		self._logQueue = queue.Queue(256)
		self._feedRateModifier = {}
		self._currentZ = -1
		
		if port == 'AUTO':
			programmer = stk500v2.Stk500v2()
			self._log("Serial port list: %s" % (str(serialList())))
			for p in serialList():
				try:
					self._log("Connecting to: %s" % (p))
					programmer.connect(p)
					self._serial = programmer.leaveISP()
					profile.putPreference('serial_port_auto', p)
					break
				except ispBase.IspError as (e):
					self._log("Error while connecting to %s: %s" % (p, str(e)))
					pass
				except:
					self._log("Unexpected error while connecting to serial port: %s %s" % (p, getExceptionString()))
				programmer.close()
		elif port == 'VIRTUAL':
			self._serial = VirtualPrinter()
		else:
			try:
				self._log("Connecting to: %s" % (port))
				if baudrate == 0:
					self._serial = Serial(port, 115200, timeout=0.1)
				else:
					self._serial = Serial(port, baudrate, timeout=2)
			except:
				self._log("Unexpected error while connecting to serial port: %s %s" % (port, getExceptionString()))
		if self._serial == None:
			self._log("Failed to open serial port (%s)" % (port))
			self._errorValue = 'Failed to autodetect serial port.'
			self._changeState(self.STATE_ERROR)
			return
		self._log("Connected to: %s, starting monitor" % (self._serial))
		if baudrate == 0:
			self._changeState(self.STATE_DETECT_BAUDRATE)
		else:
			self._changeState(self.STATE_CONNECTING)
		self.thread = threading.Thread(target=self._monitor)
		self.thread.daemon = True
		self.thread.start()

开发者ID:martinxyz，项目名称:Cura，代码行数:65，代码来源:machineCom.py

示例17: StoreData

 def StoreData(self):
     if self.UltimakerRadio.GetValue():
         profile.putPreference("machine_width", "205")
         profile.putPreference("machine_depth", "205")
         profile.putPreference("machine_height", "200")
         profile.putProfileSetting("nozzle_size", "0.4")
         profile.putProfileSetting("machine_center_x", "100")
         profile.putProfileSetting("machine_center_y", "100")
     else:
         profile.putPreference("machine_width", "80")
         profile.putPreference("machine_depth", "80")
         profile.putPreference("machine_height", "60")
         profile.putProfileSetting("nozzle_size", "0.5")
         profile.putProfileSetting("machine_center_x", "40")
         profile.putProfileSetting("machine_center_y", "40")
     profile.putProfileSetting("wall_thickness", float(profile.getProfileSetting("nozzle_size")) * 2)

开发者ID:greenarrow，项目名称:Cura，代码行数:16，代码来源:configWizard.py

示例18: _loadModels

 def _loadModels(self, filelist):
     self.filelist = filelist
     self.SetTitle(filelist[-1] + " - Cura - " + version.getVersion())
     profile.putPreference("lastFile", ";".join(self.filelist))
     self.preview3d.loadModelFiles(self.filelist, True)
     self.preview3d.setViewMode("Normal")

开发者ID:younew，项目名称:Cura，代码行数:6，代码来源:mainWindow.py

示例19: OnSimpleSwitch

 def OnSimpleSwitch(self, e):
     profile.putPreference("startMode", "Simple")
     simpleMode.simpleModeWindow()
     self.Close()

开发者ID:younew，项目名称:Cura，代码行数:4，代码来源:mainWindow.py

示例20: OnNormalSwitch

	def OnNormalSwitch(self, e):
		from gui import mainWindow
		profile.putPreference('startMode', 'Normal')
		mainWindow.mainWindow()
		self.Close()

开发者ID:felipesanches，项目名称:Cura，代码行数:5，代码来源:simpleMode.py

注：本文中的util.profile.putPreference函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python profile.putProfileSetting函数代码示例发布时间：2022-05-26

Python profile.getProfileSettingFloat函数代码示例发布时间：2022-05-26

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13949|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10293|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4182|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4065|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3891|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3540|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3071|2022-01-22

8 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2734|2022-01-22

9 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2683|2022-05-25

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2350|2022-01-22

客服电话

电子邮件

Python profile.putPreference函数代码示例

示例1: __init__

示例2: main

示例3: OnSettingChange

示例4: OnLoadModel

示例5: main

示例6: OnDropFiles

示例7: OnAddModel

示例8: main

示例9: _showModelLoadDialog

示例10: _showOpenDialog

示例11: OnAddModel

示例12: onLoad

示例13: _showOpenDialog

示例14: StoreData

示例15: main

示例16: __init__

示例17: StoreData

示例18: _loadModels

示例19: OnSimpleSwitch

示例20: OnNormalSwitch

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053

示例1: init

示例16: init