本文整理汇总了Python中twisted.web.html.escape函数的典型用法代码示例。如果您正苦于以下问题:Python escape函数的具体用法?Python escape怎么用?Python escape使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了escape函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: rebuild
def rebuild(self, req):
if self.isUsingUserPasswd(req):
if not self.authUser(req):
return Redirect("../../../authfailed")
b = self.build_status
bc = self.builder_control
builder_name = b.getBuilder().getName()
log.msg("web rebuild of build %s:%s" % (builder_name, b.getNumber()))
name = req.args.get("username", ["<unknown>"])[0]
comments = req.args.get("comments", ["<no reason specified>"])[0]
reason = ("The web-page 'rebuild' button was pressed by "
"'%s': %s\n" % (html.escape(name), html.escape(comments)))
extraProperties = getAndCheckProperties(req)
if not bc or not b.isFinished() or extraProperties is None:
log.msg("could not rebuild: bc=%s, isFinished=%s"
% (bc, b.isFinished()))
# TODO: indicate an error
else:
bc.resubmitBuild(b, reason, extraProperties)
# we're at
# http://localhost:8080/builders/NAME/builds/5/rebuild?[args]
# Where should we send them?
#
# Ideally it would be to the per-build page that they just started,
# but we don't know the build number for it yet (besides, it might
# have to wait for a current build to finish). The next-most
# preferred place is somewhere that the user can see tangible
# evidence of their build starting (or to see the reason that it
# didn't start). This should be the Builder page.
r = Redirect("../..") # the Builder's page
d = defer.Deferred()
reactor.callLater(1, d.callback, r)
return DeferredResource(d)
开发者ID:realalien,项目名称:buildbot.play,代码行数:33,代码来源:build.py
示例2: performAction
def performAction(self, req):
authz = self.getAuthz(req)
res = yield authz.actionAllowed(self.action, req, self.build_status)
if not res:
defer.returnValue(path_to_authzfail(req))
return
b = self.build_status
log.msg("web stopBuild of build %s:%s" %
(b.getBuilder().getName(), b.getNumber()))
name = authz.getUsernameFull(req)
comments = _get_comments_from_request(req)
# html-quote both the username and comments, just to be safe
reason = ("The web-page 'stop build' button was pressed by "
"'%s': %s\n" % (html.escape(name), html.escape(comments)))
c = interfaces.IControl(self.getBuildmaster(req))
bldrc = c.getBuilder(self.build_status.getBuilder().getName())
if bldrc:
bldc = bldrc.getBuild(self.build_status.getNumber())
if bldc:
bldc.stopBuild(reason)
defer.returnValue(path_to_builder(req, self.build_status.getBuilder()))
开发者ID:Ratio2,项目名称:buildbot,代码行数:25,代码来源:build.py
示例3: force
def force(self, req):
"""
Custom properties can be passed from the web form. To do
this, subclass this class, overriding the force() method. You
can then determine the properties (usually from form values,
by inspecting req.args), then pass them to this superclass
force method.
"""
name = req.args.get("username", ["<unknown>"])[0]
reason = req.args.get("comments", ["<no reason specified>"])[0]
branch = req.args.get("branch", [""])[0]
revision = req.args.get("revision", [""])[0]
r = "The web-page 'force build' button was pressed by '%s': %s\n" \
% (html.escape(name), html.escape(reason))
log.msg("web forcebuild of builder '%s', branch='%s', revision='%s'"
" by user '%s'" % (self.builder_status.getName(), branch,
revision, name))
if not self.builder_control:
# TODO: tell the web user that their request was denied
log.msg("but builder control is disabled")
return Redirect("..")
if self.isUsingUserPasswd(req):
if not self.authUser(req):
return Redirect("../../authfail")
# keep weird stuff out of the branch and revision strings. TODO:
# centralize this somewhere.
if not re.match(r'^[\w\.\-\/]*$', branch):
log.msg("bad branch '%s'" % branch)
return Redirect("..")
if not re.match(r'^[\w\.\-\/]*$', revision):
log.msg("bad revision '%s'" % revision)
return Redirect("..")
if not branch:
branch = None
if not revision:
revision = None
# TODO: if we can authenticate that a particular User pushed the
# button, use their name instead of None, so they'll be informed of
# the results.
# TODO2: we can authenticate that a particular User pushed the button
# now, so someone can write this support. but it requires a
# buildbot.changes.changes.Change instance which is tedious at this
# stage to compute
s = SourceStamp(branch=branch, revision=revision)
req = BuildRequest(r, s, builderName=self.builder_status.getName())
try:
self.builder_control.requestBuildSoon(req)
except interfaces.NoSlaveError:
# TODO: tell the web user that their request could not be
# honored
pass
# send the user back to the builder page
return Redirect(".")
开发者ID:azverkan,项目名称:buildbot,代码行数:60,代码来源:builder.py
示例4: stop
def stop(self, req, auth_ok=False):
# check if this is allowed
if not auth_ok:
if not self.getAuthz(req).actionAllowed('stopBuild', req, self.build_status):
return Redirect(path_to_authfail(req))
b = self.build_status
log.msg("web stopBuild of build %s:%s" % \
(b.getBuilder().getName(), b.getNumber()))
name = req.args.get("username", ["<unknown>"])[0]
comments = req.args.get("comments", ["<no reason specified>"])[0]
# html-quote both the username and comments, just to be safe
reason = ("The web-page 'stop build' button was pressed by "
"'%s': %s\n" % (html.escape(name), html.escape(comments)))
c = interfaces.IControl(self.getBuildmaster(req))
bldrc = c.getBuilder(self.build_status.getBuilder().getName())
if bldrc:
bldc = bldrc.getBuild(self.build_status.getNumber())
if bldc:
bldc.stopBuild(reason)
# we're at http://localhost:8080/svn-hello/builds/5/stop?[args] and
# we want to go to: http://localhost:8080/svn-hello
r = Redirect(path_to_builder(req, self.build_status.getBuilder()))
d = defer.Deferred()
reactor.callLater(1, d.callback, r)
return DeferredResource(d)
开发者ID:aslater,项目名称:buildbot,代码行数:28,代码来源:build.py
示例5: performAction
def performAction(self, req):
d = self.getAuthz(req).actionAllowed(self.action, req,
self.build_status)
wfd = defer.waitForDeferred(d)
yield wfd
res = wfd.getResult()
if not res:
yield path_to_authfail(req)
return
b = self.build_status
log.msg("web stopBuild of build %s:%s" % \
(b.getBuilder().getName(), b.getNumber()))
name = req.args.get("username", ["<unknown>"])[0]
comments = req.args.get("comments", ["<no reason specified>"])[0]
# html-quote both the username and comments, just to be safe
reason = ("The web-page 'stop build' button was pressed by "
"'%s': %s\n" % (html.escape(name), html.escape(comments)))
c = interfaces.IControl(self.getBuildmaster(req))
bldrc = c.getBuilder(self.build_status.getBuilder().getName())
if bldrc:
bldc = bldrc.getBuild(self.build_status.getNumber())
if bldc:
bldc.stopBuild(reason)
yield path_to_builder(req, self.build_status.getBuilder())
return
开发者ID:tcooperma,项目名称:buildbot,代码行数:29,代码来源:build.py
示例6: to_html
def to_html(self, href_base="", timestamps="short-local"):
d = self.e['d']
time_short, time_extended = web_format_time(d['time'], timestamps)
msg = html.escape(log.format_message(d))
if 'failure' in d:
lines = str(d['failure']).split("\n")
html_lines = [html.escape(line) for line in lines]
f_html = "\n".join(html_lines)
msg += " FAILURE:<pre>%s</pre>" % f_html
level = d.get('level', log.OPERATIONAL)
level_s = ""
if level >= log.UNUSUAL:
level_s = self.LEVELMAP.get(level, "") + " "
details = " ".join(["Event #%d" % d['num'],
"TubID=%s" % self.e['from'],
"Incarnation=%s" % self.incarnation,
time_extended])
label = '<span title="%s">%s</span>' % (details, time_short)
data = '%s [<span id="E%s"><a href="%s#E%s">%d</a></span>]: %s%s' \
% (label,
self.anchor_index, href_base, self.anchor_index, d['num'],
level_s, msg)
if self.is_trigger:
data += " [INCIDENT-TRIGGER]"
return data
开发者ID:ClashTheBunny,项目名称:foolscap,代码行数:25,代码来源:web.py
示例7: GenStepBox
def GenStepBox(stepstatus):
"""Generates a box for one step."""
class_ = build_get_class(stepstatus)
style = ''
if class_ and class_ in styles:
style = styles[class_]
stepname = stepstatus.getName()
text = stepstatus.getText() or []
text = text[:]
base_url = '%sbuilders/%s/builds/%d/steps' % (
waterfall_url,
urllib.quote(stepstatus.getBuild().getBuilder().getName(), safe=''),
stepstatus.getBuild().getNumber())
for steplog in stepstatus.getLogs():
name = steplog.getName()
log.msg('name = %s' % name)
url = '%s/%s/logs/%s' % (
base_url,
urllib.quote(stepname, safe=''),
urllib.quote(name))
text.append('<a href="%s">%s</a>' % (url, html.escape(name)))
for name, target in stepstatus.getURLs().iteritems():
text.append('<a href="%s">%s</a>' % (target, html.escape(name)))
fmt = '<tr><td style="%s">%s</td></tr>'
return fmt % (style, '<br/>'.join(text))
开发者ID:leiferikb,项目名称:bitpop,代码行数:25,代码来源:build_utils.py
示例8: stop
def stop(self, req, auth_ok=False):
# check if this is allowed
if not auth_ok:
return StopBuildActionResource(self.build_status)
b = self.build_status
log.msg("web stopBuild of build %s:%s" %
(b.getBuilder().getName(), b.getNumber()))
name = self.getAuthz(req).getUsernameFull(req)
comments = _get_comments_from_request(req)
# html-quote both the username and comments, just to be safe
reason = ("The web-page 'stop build' button was pressed by "
"'%s': %s\n" % (html.escape(name), html.escape(comments)))
c = interfaces.IControl(self.getBuildmaster(req))
bldrc = c.getBuilder(self.build_status.getBuilder().getName())
if bldrc:
bldc = bldrc.getBuild(self.build_status.getNumber())
if bldc:
bldc.stopBuild(reason)
# we're at http://localhost:8080/svn-hello/builds/5/stop?[args] and
# we want to go to: http://localhost:8080/svn-hello
r = Redirect(path_to_builder(req, self.build_status.getBuilder()))
d = defer.Deferred()
reactor.callLater(1, d.callback, r)
return DeferredResource(d)
开发者ID:Ratio2,项目名称:buildbot,代码行数:28,代码来源:build.py
示例9: body
def body(self, req):
s = self.step_status
b = s.getBuild()
builder_name = b.getBuilder().getName()
build_num = b.getNumber()
data = ""
data += '<h1>BuildStep <a href="%s">%s</a>:' % (path_to_builder(req, b.getBuilder()), builder_name)
data += '<a href="%s">#%d</a>' % (path_to_build(req, b), build_num)
data += ":%s</h1>\n" % s.getName()
if s.isFinished():
data += "<h2>Finished</h2>\n" "<p>%s</p>\n" % html.escape("%s" % s.getText())
else:
data += "<h2>Not Finished</h2>\n" "<p>ETA %s seconds</p>\n" % s.getETA()
exp = s.getExpectations()
if exp:
data += "<h2>Expectations</h2>\n" "<ul>\n"
for e in exp:
data += "<li>%s: current=%s, target=%s</li>\n" % (html.escape(e[0]), e[1], e[2])
data += "</ul>\n"
(start, end) = s.getTimes()
if not start:
start_text = end_text = elapsed = "Not Started"
else:
start_text = ctime(start)
if end:
end_text = ctime(end)
elapsed = util.formatInterval(end - start)
else:
end_text = "Not Finished"
elapsed = util.formatInterval(util.now() - start)
data += "<h2>Timing</h2>\n"
data += "<table>\n"
data += "<tr><td>Start</td><td>%s</td></tr>\n" % start_text
data += "<tr><td>End</td><td>%s</td></tr>\n" % end_text
data += "<tr><td>Elapsed</td><td>%s</td></tr>\n" % elapsed
data += "</table>\n"
logs = s.getLogs()
if logs:
data += "<h2>Logs</h2>\n" "<ul>\n"
for logfile in logs:
if logfile.hasContents():
# FIXME: If the step name has a / in it, this is broken
# either way. If we quote it but say '/'s are safe,
# it chops up the step name. If we quote it and '/'s
# are not safe, it escapes the / that separates the
# step name from the log number.
logname = logfile.getName()
logurl = req.childLink("logs/%s" % urllib.quote(logname))
data += '<li><a href="%s">%s</a></li>\n' % (logurl, html.escape(logname))
else:
data += "<li>%s</li>\n" % html.escape(logname)
data += "</ul>\n"
return data
开发者ID:nsylvain,项目名称:buildbot,代码行数:59,代码来源:step.py
示例10: error_handler
def error_handler(self, m):
try:
if m['isError'] == 1:
self.log.err(escape(repr(m)))
reactor.stop()
else:
self.log.log(escape(repr(m)))
except: print m
开发者ID:BackupTheBerlios,项目名称:freq-dev-svn,代码行数:8,代码来源:freq.py
示例11: call_cmd_handlers
def call_cmd_handlers(self, t, s, body, subject, stanza):
if subject: return
#found or create item
groupchat = s.split('/')[0]
nick = s[len(groupchat)+1:]
try: item = self.g[groupchat][nick]
except:
item = new_item(self)
item.jid = s
item.realjid = s
if item.room and (item.nick == self.muc.get_nick(item.room.jid)):
self.log.log(u'own message from %s ignored' % (escape(item.jid), ), 2)
return
#check for bad words
if item.room and (t == 'groupchat'): self.check_text(item, body)
#launch rewrite engines
commands = [(t, item, body, stanza)]
itercount = 0
rl = config.REWRITE_POWER
changed = True
while changed and (len(commands) < rl) and (itercount < rl):
itercount += 1
self.log.log(escape('launch rewrite engines.. step %s, commands=%s' % (itercount, commands)), 1)
changed = False
for engine in self.rewriteengines:
r_commands = []
for command in commands:
r_command = self.call(engine, command)
if r_command:
r_commands = r_commands + r_command
changed = True
else: r_commands = r_commands + [command]
commands = r_commands
self.log.log(escape('rewrite engines done, itercount=%s, commands=%s' % (itercount, commands)), 1)
if itercount == rl: item.lmsg(t, 'rewrite_cycle', rl)
elif len(commands) >= rl: item.lmsg(t, 'rewrite_too_many_commands', rl)
else:
#execute commands, generated by rewrite engines
commands = [command for command in commands if self.check_for_ddos(command[1].jid)]
# check if not DDOS
for command in commands:
[t, s, b, stanza] = command
params = b.split()
if len(params):
cmd = b.split()[0]
params = b[len(cmd)+1:]
for i in self.cmdhandlers:
if cmd.lower() == i[1]:
if s.allowed(i[2]):
if (s.room and s.room.bot) or not i[3]:
self.log.log(u'Calling command handler <b>%s</b> for command <font color=red>%s</font> from <font color=blue>%s (%s)</font><br/>stanza: <font color=grey>%s</font>' % (escape(repr(i[0])), escape(b), escape(s.jid), escape(repr(s)), escape(stanza.toXml())), 4)
try: i[0](t, s, params)
except:
m = ''.join(traceback.format_exception(sys.exc_type, sys.exc_value, sys.exc_traceback))
self.log.err(escape(m))
item.lmsg(t, 'ERROR', config.ERRLOGFILE)
else: s.lmsg(t, 'muc_only')
else: s.lmsg(t, 'not_allowed')
开发者ID:BackupTheBerlios,项目名称:freq-dev-svn,代码行数:58,代码来源:freq.py
示例12: performAction
def performAction(self, req):
# check if this is allowed
d = self.getAuthz(req).actionAllowed(self.action, req,
self.builder_status)
wfd = defer.waitForDeferred(d)
yield wfd
res = wfd.getResult()
if not res:
log.msg("..but not authorized")
yield path_to_authfail(req)
return
master = self.getBuildmaster(req)
# keep weird stuff out of the branch revision, and property strings.
branch_validate = master.config.validation['branch']
revision_validate = master.config.validation['revision']
if not branch_validate.match(self.req_args['branch']):
log.msg("bad branch '%s'" % self.req_args['branch'])
yield path_to_builder(req, self.builder_status)
return
if not revision_validate.match(self.req_args['revision']):
log.msg("bad revision '%s'" % self.req_args['revision'])
yield path_to_builder(req, self.builder_status)
return
properties = getAndCheckProperties(req)
if properties is None:
yield path_to_builder(req, self.builder_status)
return
if not self.req_args['branch']:
self.req_args['branch'] = None
if not self.req_args['revision']:
self.req_args['revision'] = None
d = master.db.sourcestamps.addSourceStamp(
branch=self.req_args['branch'],
revision=self.req_args['revision'],
project=self.req_args['project'],
repository=self.req_args['repository'])
wfd = defer.waitForDeferred(d)
yield wfd
ssid = wfd.getResult()
r = ("The web-page 'force build' button was pressed by '%s': %s\n"
% (html.escape(self.req_args['name']),
html.escape(self.req_args['reason'])))
d = master.addBuildset(builderNames=[self.builder_status.getName()],
ssid=ssid, reason=r,
properties=properties.asDict())
wfd = defer.waitForDeferred(d)
yield wfd
tup = wfd.getResult()
# check that (bsid, brids) were properly stored
if not isinstance(tup, (int, dict)):
log.err("(ignored) while trying to force build")
# send the user back to the builder page
yield path_to_builder(req, self.builder_status)
开发者ID:allannss,项目名称:buildbot,代码行数:58,代码来源:builder.py
示例13: call
def call(self, f, *args, **kwargs):
try: return f(*args, **kwargs)
except:
m = '; '.join(traceback.format_exception(sys.exc_type, sys.exc_value, sys.exc_traceback))
m = m.decode('utf8', 'replace')
m = u'<font color=red><b>ERROR:</b></font> %s\n<br/>\n(f, *args, *kwargs) was <font color=grey>(%s)</font>' \
% (escape(m), escape(repr((f, args, kwargs))))
self.log.err(m)
return 0
开发者ID:BackupTheBerlios,项目名称:freq-dev-svn,代码行数:9,代码来源:freq.py
示例14: check_text
def check_text(self, source, text):
#if source.room and (source.room.bot.nick == self.muc.get_nick(source.room.jid)):
# return #ignore own messages/presences
if not text: return #ignore empty messages/statuses
self.log.log(u'checking %s (from %s)' % (escape(text), escape(source.jid)), 1)
bad_word = self.censor.respond(text)
if bad_word:
self.log.log(u'found bad word <%s>, let\'s call bad_handlers!' % (escape(bad_word), ), 3)
self.call_bad_handlers(source, text, bad_word)
else: self.log.log(u'bad words not found (result: %s)' % (bad_word, ), 1)
开发者ID:BackupTheBerlios,项目名称:freq-dev-svn,代码行数:10,代码来源:freq.py
示例15: force
def force(self, req, auth_ok=False):
name = req.args.get("username", ["<unknown>"])[0]
reason = req.args.get("comments", ["<no reason specified>"])[0]
branch = req.args.get("branch", [""])[0]
revision = req.args.get("revision", [""])[0]
repository = req.args.get("repository", [""])[0]
project = req.args.get("project", [""])[0]
r = "The web-page 'force build' button was pressed by '%s': %s\n" \
% (html.escape(name), html.escape(reason))
log.msg("web forcebuild of builder '%s', branch='%s', revision='%s',"
" repository='%s', project='%s' by user '%s'" % (
self.builder_status.getName(), branch, revision, repository,
project, name))
# check if this is allowed
if not auth_ok:
if not self.getAuthz(req).actionAllowed('forceBuild', req, self.builder_status):
log.msg("..but not authorized")
return Redirect(path_to_authfail(req))
# keep weird stuff out of the branch revision, and property strings.
# TODO: centralize this somewhere.
if not re.match(r'^[\w.+/~-]*$', branch):
log.msg("bad branch '%s'" % branch)
return Redirect(path_to_builder(req, self.builder_status))
if not re.match(r'^[ \w\.\-\/]*$', revision):
log.msg("bad revision '%s'" % revision)
return Redirect(path_to_builder(req, self.builder_status))
properties = getAndCheckProperties(req)
if properties is None:
return Redirect(path_to_builder(req, self.builder_status))
if not branch:
branch = None
if not revision:
revision = None
# TODO: if we can authenticate that a particular User pushed the
# button, use their name instead of None, so they'll be informed of
# the results.
# TODO2: we can authenticate that a particular User pushed the button
# now, so someone can write this support. but it requires a
# buildbot.changes.changes.Change instance which is tedious at this
# stage to compute
s = SourceStamp(branch=branch, revision=revision, project=project, repository=repository)
try:
c = interfaces.IControl(self.getBuildmaster(req))
bc = c.getBuilder(self.builder_status.getName())
bc.submitBuildRequest(s, r, properties)
except interfaces.NoSlaveError:
# TODO: tell the web user that their request could not be
# honored
pass
# send the user back to the builder page
return Redirect(path_to_builder(req, self.builder_status))
开发者ID:Flumotion,项目名称:buildbot,代码行数:55,代码来源:builder.py
示例16: call_msg_handlers
def call_msg_handlers(self, t, s, b, subject, stanza):
if subject:
j = JID(s)
if not j.userhost() in self.g.keys():
self.log.log('ignored subject from %s, stanza was %s' % (escape(s), escape(stanza.toXml())), 3)
else:
self.log.log('got subject from %s, stanza was %s, let\'s call topichandlers' % (escape(s), escape(stanza.toXml())), 1)
for i in self.topichandlers: self.call(i, s, subject)
else:
for i in self.msghandlers:
if (t == 'groupchat') or not i[1]: self.call(i[0], s, b)
开发者ID:BackupTheBerlios,项目名称:freq-dev-svn,代码行数:11,代码来源:freq.py
示例17: body
def body(self, request):
dotname = ".".join(self.name)
logs = self.test_result.getLogs()
lognames = logs.keys()
lognames.sort()
data = "<h1>%s</h1>\n" % html.escape(dotname)
for name in lognames:
data += "<h2>%s</h2>\n" % html.escape(name)
data += "<pre>" + logs[name] + "</pre>\n\n"
return data
开发者ID:LawrenceChan,项目名称:buildbot,代码行数:11,代码来源:tests.py
示例18: chatlogs_msg_handler
def chatlogs_msg_handler(source, body):
if not body: return
j = jid.JID(source)
room = j.userhost()
nick = j.resource
if not nick: nick = room
if (room in bot.g.keys()) and (bot.g[room].get_option('chatlogs', config.CHATLOGS_ENABLE)=='on'):
if body.startswith(u'/me ') and (len(body)>4):
m = u'<font class="mne">* %s %s</font>' % (escape(nick), replace_links(escape(body[4:]).replace('\n', '<br/>')))
else:
m = u'<font class="mn"><%s></font> %s' % (escape(nick), replace_links(escape(body).replace('\n', '<br/>')))
write_to_log(room, m)
开发者ID:BackupTheBerlios,项目名称:freq-dev-svn,代码行数:12,代码来源:chatlogs.py
示例19: ToHtml
def ToHtml(text):
"""Convert a string in a wiki-style format into HTML."""
indent = 0
in_item = False
output = []
for line in text.splitlines(False):
match = re.match(r'^( +)\- (.*)$', line)
if match:
if indent < len(match.group(1)):
output.append('<ul>')
indent = len(match.group(1))
elif indent > len(match.group(1)):
while indent > len(match.group(1)):
output.append('</ul>')
indent -= 2
if in_item:
# Close previous item
output.append('</li>')
output.append('<li>')
in_item = True
line = match.group(2)
elif indent:
if line.startswith((' ' * indent) + ' '):
# List continuation
line = line.strip()
else:
# List is done
if in_item:
output.append('</li>')
in_item = False
while indent > 0:
output.append('</ul>')
indent -= 2
if line.startswith('/'):
if not '?' in line:
line_full = line + '?as_text=1'
else:
line_full = line + '&as_text=1'
output.append('<a href="' + html.escape(line_full) + '">' +
html.escape(line) + '</a>')
else:
output.append(html.escape(line).replace(' ', ' '))
if not in_item:
output.append('<br>')
if in_item:
output.append('</li>')
while indent > 0:
output.append('</ul>')
indent -= 2
return '\n'.join(output)
开发者ID:leiferikb,项目名称:bitpop,代码行数:52,代码来源:status_json.py
示例20: msg
def msg(self, t, s, b):
if len(b) > msglimit: b = b[:msglimit]+'... (truncated)'
b = b.strip()
self.bot.log.log(escape(u'attempt to send message to %s (type "%s", body: %s)' % (s, t, b)), 3)
if (s in self.bot.g.keys()) or (t=='chat'):
if b == '': b = '[empty message]'
self.bot.wrapper.msg(t, s, b)
else:
s = s.split('/')
groupchat = s[0]
nick = '/'.join(s[1:])
self.bot.log.log(escape(u'send message to %s (type "%s", body: %s)' % (groupchat, t, b)), 3)
self.bot.wrapper.msg(t, groupchat, '%s: %s' % (nick, b))
开发者ID:BackupTheBerlios,项目名称:freq-dev-svn,代码行数:13,代码来源:muc.py
注:本文中的twisted.web.html.escape函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论