本文整理汇总了Python中test_p2p_grpform.check_grpform_results函数的典型用法代码示例。如果您正苦于以下问题:Python check_grpform_results函数的具体用法?Python check_grpform_results怎么用?Python check_grpform_results使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了check_grpform_results函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: test_go_neg_forced_freq_diff_than_bss_freq
def test_go_neg_forced_freq_diff_than_bss_freq(dev, apdev):
"""P2P channel selection: GO negotiation with forced freq different than station interface"""
if dev[0].get_mcc() < 2:
logger.info("Skipping test because driver does not support MCC")
return "skip"
dev[0].request("SET p2p_no_group_iface 0")
hostapd.add_ap(apdev[0]['ifname'], { "country_code": 'US',
"ssid": 'bss-5ghz', "hw_mode": 'a',
"channel": '40' })
dev[0].connect("bss-5ghz", key_mgmt="NONE", scan_freq="5200")
# GO and peer force the same freq, different than BSS freq,
# dev[0] to become GO
[i_res, r_res] = go_neg_pbc(i_dev=dev[1], i_intent=1, i_freq=5180,
r_dev=dev[0], r_intent=14, r_freq=5180)
check_grpform_results(i_res, r_res)
if i_res['freq'] != "5180":
raise Exception("P2P group formed on unexpected frequency: " + i_res['freq'])
if r_res['role'] != "GO":
raise Exception("GO not selected according to go_intent")
hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
dev[0].remove_group(r_res['ifname'])
# GO and peer force the same freq, different than BSS freq, dev[0] to
# become client
[i_res2, r_res2] = go_neg_pbc(i_dev=dev[1], i_intent=14, i_freq=2422,
r_dev=dev[0], r_intent=1, r_freq=2422)
check_grpform_results(i_res2, r_res2)
if i_res2['freq'] != "2422":
raise Exception("P2P group formed on unexpected frequency: " + i_res2['freq'])
if r_res2['role'] != "client":
raise Exception("GO not selected according to go_intent")
hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
开发者ID:ivkos,项目名称:hostap-force-ht40,代码行数:35,代码来源:test_p2p_channel.py
示例2: test_go_neg_with_bss_connected
def test_go_neg_with_bss_connected(dev, apdev):
"""P2P channel selection: GO negotiation when station interface is connected"""
dev[0].request("SET p2p_no_group_iface 0")
hapd = hostapd.add_ap(apdev[0]['ifname'],
{ "ssid": 'bss-2.4ghz', "channel": '5' })
dev[0].connect("bss-2.4ghz", key_mgmt="NONE", scan_freq="2432")
#dev[0] as GO
[i_res, r_res] = go_neg_pbc(i_dev=dev[0], i_intent=10, r_dev=dev[1],
r_intent=1)
check_grpform_results(i_res, r_res)
if i_res['role'] != "GO":
raise Exception("GO not selected according to go_intent")
if i_res['freq'] != "2432":
raise Exception("Group formed on a different frequency than BSS")
hwsim_utils.test_connectivity(dev[0], hapd)
dev[0].remove_group(i_res['ifname'])
if dev[0].get_mcc() > 1:
logger.info("Skip as-client case due to MCC being enabled")
return;
#dev[0] as client
[i_res2, r_res2] = go_neg_pbc(i_dev=dev[0], i_intent=1, r_dev=dev[1],
r_intent=10)
check_grpform_results(i_res2, r_res2)
if i_res2['role'] != "client":
raise Exception("GO not selected according to go_intent")
if i_res2['freq'] != "2432":
raise Exception("Group formed on a different frequency than BSS")
hwsim_utils.test_connectivity(dev[0], hapd)
开发者ID:aelarabawy,项目名称:hostap,代码行数:32,代码来源:test_p2p_channel.py
示例3: test_p2p_device_grpform
def test_p2p_device_grpform(dev, apdev):
"""P2P group formation with driver using cfg80211 P2P Device"""
with HWSimRadio(use_p2p_device=True) as (radio, iface):
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add(iface)
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=wpas, r_intent=0)
check_grpform_results(i_res, r_res)
wpas.dump_monitor()
remove_group(dev[0], wpas)
wpas.dump_monitor()
res = wpas.global_request("IFNAME=p2p-dev-" + iface + " STATUS-DRIVER")
lines = res.splitlines()
found = False
for l in lines:
try:
[name,value] = l.split('=', 1)
if name == "wdev_id":
found = True
break
except ValueError:
pass
if not found:
raise Exception("wdev_id not found")
开发者ID:PavanKulk,项目名称:codebase,代码行数:25,代码来源:test_p2p_device.py
示例4: test_go_neg_with_bss_on_disallowed_chan
def test_go_neg_with_bss_on_disallowed_chan(dev, apdev):
"""P2P channel selection: GO negotiation with station interface on a disallowed channel"""
dev[0].request("SET p2p_no_group_iface 0")
if dev[0].get_mcc() < 2:
logger.info("Skipping test because driver does not support MCC")
return "skip"
try:
hostapd.add_ap(apdev[0]['ifname'], { "ssid": 'bss-2.4ghz', "channel": '1' })
dev[0].connect("bss-2.4ghz", key_mgmt="NONE", scan_freq="2412")
dev[0].request("P2P_SET disallow_freq 2412")
#dev[0] as GO
[i_res, r_res] = go_neg_pbc(i_dev=dev[0], i_intent=10, r_dev=dev[1],
r_intent=1)
check_grpform_results(i_res, r_res)
if i_res['role'] != "GO":
raise Exception("GO not selected according to go_intent")
if i_res['freq'] == "2412":
raise Exception("Group formed on a disallowed channel")
hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
dev[0].remove_group(i_res['ifname'])
#dev[0] as client
[i_res2, r_res2] = go_neg_pbc(i_dev=dev[0], i_intent=1, r_dev=dev[1],
r_intent=10)
check_grpform_results(i_res2, r_res2)
if i_res2['role'] != "client":
raise Exception("GO not selected according to go_intent")
if i_res2['freq'] == "2412":
raise Exception("Group formed on a disallowed channel")
hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
finally:
dev[0].request("P2P_SET disallow_freq ")
开发者ID:ivkos,项目名称:hostap-force-ht40,代码行数:35,代码来源:test_p2p_channel.py
示例5: test_no_go_freq
def test_no_go_freq(dev, apdev):
"""P2P channel selection: no GO freq"""
try:
dev[0].request("SET p2p_no_go_freq 2412")
# dev[0] as client, channel 1 is ok
[i_res, r_res] = go_neg_pbc(i_dev=dev[0], i_intent=1,
r_dev=dev[1], r_intent=14, r_freq=2412)
check_grpform_results(i_res, r_res)
if i_res['freq'] != "2412":
raise Exception("P2P group not formed on forced freq")
dev[1].remove_group(r_res['ifname'])
dev[0].wait_go_ending_session()
dev[0].flush_scan_cache()
fail = False
# dev[0] as GO, channel 1 is not allowed
try:
dev[0].request("SET p2p_no_go_freq 2412")
[i_res2, r_res2] = go_neg_pbc(i_dev=dev[0], i_intent=14,
r_dev=dev[1], r_intent=1, r_freq=2412)
check_grpform_results(i_res2, r_res2)
fail = True
except:
pass
if fail:
raise Exception("GO set on a disallowed freq")
finally:
dev[0].request("SET p2p_no_go_freq ")
开发者ID:Hansenq,项目名称:wifi-goes-to-town,代码行数:29,代码来源:test_p2p_channel.py
示例6: test_connect_cmd_concurrent_grpform_while_connecting
def test_connect_cmd_concurrent_grpform_while_connecting(dev, apdev):
"""Concurrent P2P group formation while connecting to an AP using cfg80211 connect command"""
logger.info("Start connection to an infrastructure AP")
hapd = hostapd.add_ap(apdev[0]['ifname'], { "ssid": "test-open" })
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("test-open", key_mgmt="NONE", wait_connect=False)
wpas.dump_monitor()
logger.info("Form a P2P group while connecting to an AP")
wpas.request("SET p2p_no_group_iface 0")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_freq=2412,
r_dev=wpas, r_freq=2412)
check_grpform_results(i_res, r_res)
remove_group(dev[0], wpas)
wpas.dump_monitor()
logger.info("Confirm AP connection after P2P group removal")
hwsim_utils.test_connectivity(wpas, hapd)
wpas.request("DISCONNECT")
wpas.wait_disconnected()
wpas.dump_monitor()
开发者ID:PavanKulk,项目名称:codebase,代码行数:25,代码来源:test_connect_cmd.py
示例7: test_p2p_device_grpform2
def test_p2p_device_grpform2(dev, apdev):
"""P2P group formation with driver using cfg80211 P2P Device (reverse)"""
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5")
[i_res, r_res] = go_neg_pin_authorized(i_dev=wpas, i_intent=15,
r_dev=dev[0], r_intent=0)
check_grpform_results(i_res, r_res)
remove_group(wpas, dev[0])
开发者ID:AlejandroAbad,项目名称:hostap,代码行数:8,代码来源:test_p2p_device.py
示例8: test_offchannel_tx_roc_grpform2
def test_offchannel_tx_roc_grpform2(dev, apdev):
"""P2P group formation(2) using cfg80211 remain-on-channel for offchannel TX"""
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="no_offchannel_tx=1")
[i_res, r_res] = go_neg_pin_authorized(i_dev=wpas, i_freq=2412,
r_dev=dev[0], r_freq=2412)
check_grpform_results(i_res, r_res)
remove_group(dev[0], wpas)
开发者ID:Hansenq,项目名称:wifi-goes-to-town,代码行数:9,代码来源:test_offchannel_tx.py
示例9: test_p2p_device_grpform
def test_p2p_device_grpform(dev, apdev):
"""P2P group formation with driver using cfg80211 P2P Device"""
with HWSimRadio(use_p2p_device=True) as (radio, iface):
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add(iface)
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=wpas, r_intent=0)
check_grpform_results(i_res, r_res)
remove_group(dev[0], wpas)
开发者ID:aelarabawy,项目名称:hostap,代码行数:9,代码来源:test_p2p_device.py
示例10: test_go_neg_with_bss_on_disallowed_chan
def test_go_neg_with_bss_on_disallowed_chan(dev, apdev):
"""P2P channel selection: GO negotiation with station interface on a disallowed channel"""
with HWSimRadio(n_channels=2) as (radio, iface):
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add(iface)
wpas.request("SET p2p_no_group_iface 0")
if wpas.get_mcc() < 2:
raise Exception("New radio does not support MCC")
try:
hapd = hostapd.add_ap(apdev[0]['ifname'],
{ "ssid": 'bss-2.4ghz', "channel": '1' })
# make sure PBC overlap from old test cases is not maintained
dev[1].flush_scan_cache()
wpas.connect("bss-2.4ghz", key_mgmt="NONE", scan_freq="2412")
wpas.request("P2P_SET disallow_freq 2412")
#wpas as GO
[i_res, r_res] = go_neg_pbc(i_dev=wpas, i_intent=10, r_dev=dev[1],
r_intent=1)
check_grpform_results(i_res, r_res)
if i_res['role'] != "GO":
raise Exception("GO not selected according to go_intent")
if i_res['freq'] == "2412":
raise Exception("Group formed on a disallowed channel")
hwsim_utils.test_connectivity(wpas, hapd)
wpas.remove_group(i_res['ifname'])
dev[1].wait_go_ending_session()
dev[1].flush_scan_cache()
wpas.dump_monitor()
dev[1].dump_monitor()
#wpas as client
[i_res2, r_res2] = go_neg_pbc(i_dev=wpas, i_intent=1, r_dev=dev[1],
r_intent=10)
check_grpform_results(i_res2, r_res2)
if i_res2['role'] != "client":
raise Exception("GO not selected according to go_intent")
if i_res2['freq'] == "2412":
raise Exception("Group formed on a disallowed channel")
hwsim_utils.test_connectivity(wpas, hapd)
dev[1].remove_group(r_res2['ifname'])
wpas.wait_go_ending_session()
ev = dev[1].wait_global_event(["P2P-GROUP-REMOVED"], timeout=5)
if ev is None:
raise Exception("Group removal not indicated")
wpas.request("DISCONNECT")
hapd.disable()
finally:
wpas.request("P2P_SET disallow_freq ")
开发者ID:Hansenq,项目名称:wifi-goes-to-town,代码行数:54,代码来源:test_p2p_channel.py
示例11: test_p2p_channel_5ghz
def test_p2p_channel_5ghz(dev):
"""P2P group formation with 5 GHz preference"""
try:
set_country("US")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=dev[1], r_intent=0,
test_data=False)
check_grpform_results(i_res, r_res)
freq = int(i_res['freq'])
if freq < 5000:
raise Exception("Unexpected channel %d MHz - did not follow 5 GHz preference" % freq)
remove_group(dev[0], dev[1])
finally:
set_country("00")
开发者ID:LiZhaoxing,项目名称:hostapd,代码行数:14,代码来源:test_p2p_channel.py
示例12: test_go_neg_forced_freq_diff_than_bss_freq
def test_go_neg_forced_freq_diff_than_bss_freq(dev, apdev):
"""P2P channel selection: GO negotiation with forced freq different than station interface"""
with HWSimRadio(n_channels=2) as (radio, iface):
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add(iface)
if wpas.get_mcc() < 2:
raise Exception("New radio does not support MCC")
# Clear possible PBC session overlap from previous test case
dev[1].flush_scan_cache()
wpas.request("SET p2p_no_group_iface 0")
hapd = hostapd.add_ap(apdev[0]['ifname'],
{ "country_code": 'US',
"ssid": 'bss-5ghz', "hw_mode": 'a',
"channel": '40' })
wpas.connect("bss-5ghz", key_mgmt="NONE", scan_freq="5200")
# GO and peer force the same freq, different than BSS freq,
# wpas to become GO
[i_res, r_res] = go_neg_pbc(i_dev=dev[1], i_intent=1, i_freq=5180,
r_dev=wpas, r_intent=14, r_freq=5180)
check_grpform_results(i_res, r_res)
if i_res['freq'] != "5180":
raise Exception("P2P group formed on unexpected frequency: " + i_res['freq'])
if r_res['role'] != "GO":
raise Exception("GO not selected according to go_intent")
hwsim_utils.test_connectivity(wpas, hapd)
wpas.remove_group(r_res['ifname'])
dev[1].wait_go_ending_session()
dev[1].flush_scan_cache()
# GO and peer force the same freq, different than BSS freq, wpas to
# become client
[i_res2, r_res2] = go_neg_pbc(i_dev=dev[1], i_intent=14, i_freq=2422,
r_dev=wpas, r_intent=1, r_freq=2422)
check_grpform_results(i_res2, r_res2)
if i_res2['freq'] != "2422":
raise Exception("P2P group formed on unexpected frequency: " + i_res2['freq'])
if r_res2['role'] != "client":
raise Exception("GO not selected according to go_intent")
hwsim_utils.test_connectivity(wpas, hapd)
wpas.request("DISCONNECT")
hapd.request("DISABLE")
subprocess.call(['iw', 'reg', 'set', '00'])
wpas.flush_scan_cache()
开发者ID:Hansenq,项目名称:wifi-goes-to-town,代码行数:49,代码来源:test_p2p_channel.py
示例13: test_p2p_channel_random_social_with_op_class_change
def test_p2p_channel_random_social_with_op_class_change(dev, apdev, params):
"""P2P group formation using random social channel with oper class change needed"""
try:
set_country("US")
logger.info("Start group on 5 GHz")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=dev[1], r_intent=0,
test_data=False)
check_grpform_results(i_res, r_res)
freq = int(i_res['freq'])
if freq < 5000:
raise Exception("Unexpected channel %d MHz - did not pick 5 GHz preference" % freq)
remove_group(dev[0], dev[1])
logger.info("Disable 5 GHz and try to re-start group based on 5 GHz preference")
dev[0].request("SET p2p_oper_reg_class 115")
dev[0].request("SET p2p_oper_channel 36")
dev[0].request("P2P_SET disallow_freq 5000-6000")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=dev[1], r_intent=0,
test_data=False)
check_grpform_results(i_res, r_res)
freq = int(i_res['freq'])
if freq not in [ 2412, 2437, 2462 ]:
raise Exception("Unexpected channel %d MHz - did not pick random social channel" % freq)
remove_group(dev[0], dev[1])
try:
arg = [ "tshark",
"-r", os.path.join(params['logdir'], "hwsim0.pcapng"),
"-R", "wifi_p2p.public_action.subtype == 0",
"-V" ]
cmd = subprocess.Popen(arg, stdout=subprocess.PIPE,
stderr=open('/dev/null', 'w'))
except Exception, e:
logger.info("Could run run tshark check: " + str(e))
cmd = None
pass
if cmd:
last = None
for l in cmd.stdout.read().splitlines():
if "Operating Channel:" not in l:
continue
last = l
if last is None:
raise Exception("Could not find GO Negotiation Request")
if "Operating Class 81" not in last:
raise Exception("Unexpected operating class: " + last.strip())
开发者ID:LiZhaoxing,项目名称:hostapd,代码行数:49,代码来源:test_p2p_channel.py
示例14: test_concurrent_grpform_while_connecting
def test_concurrent_grpform_while_connecting(dev, apdev):
"""Concurrent P2P group formation while connecting to an AP"""
logger.info("Start connection to an infrastructure AP")
hapd = hostapd.add_ap(apdev[0]["ifname"], {"ssid": "test-open"})
dev[0].connect("test-open", key_mgmt="NONE", wait_connect=False)
logger.info("Form a P2P group while connecting to an AP")
dev[0].request("SET p2p_no_group_iface 0")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_freq=2412, r_dev=dev[1], r_freq=2412)
check_grpform_results(i_res, r_res)
remove_group(dev[0], dev[1])
logger.info("Confirm AP connection after P2P group removal")
hwsim_utils.test_connectivity(dev[0], hapd)
开发者ID:yann-morin-1998,项目名称:hostap,代码行数:15,代码来源:test_p2p_concurrency.py
示例15: test_concurrent_grpform_cli
def test_concurrent_grpform_cli(dev, apdev):
"""Concurrent P2P group formation to become P2P Client"""
logger.info("Connect to an infrastructure AP")
hapd = hostapd.add_ap(apdev[0]["ifname"], {"ssid": "test-open"})
dev[0].connect("test-open", key_mgmt="NONE", scan_freq="2412")
hwsim_utils.test_connectivity(dev[0], hapd)
logger.info("Form a P2P group while associated to an AP")
dev[0].request("SET p2p_no_group_iface 0")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=0, r_dev=dev[1], r_intent=15)
check_grpform_results(i_res, r_res)
remove_group(dev[0], dev[1])
logger.info("Confirm AP connection after P2P group removal")
hwsim_utils.test_connectivity(dev[0], hapd)
开发者ID:yann-morin-1998,项目名称:hostap,代码行数:16,代码来源:test_p2p_concurrency.py
示例16: test_p2p_channel_random
def test_p2p_channel_random(dev):
"""P2P group formation with 5 GHz preference but all 5 GHz channels and all social channels disabled"""
try:
set_country("US")
dev[0].request("SET p2p_oper_channel 11")
dev[0].request("P2P_SET disallow_freq 5000-6000,2412,2437,2462")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=dev[1], r_intent=0,
test_data=False)
check_grpform_results(i_res, r_res)
freq = int(i_res['freq'])
if freq > 2500 or freq in [ 2412, 2437, 2462 ]:
raise Exception("Unexpected channel %d MHz" % freq)
remove_group(dev[0], dev[1])
finally:
set_country("00")
dev[0].request("P2P_SET disallow_freq ")
开发者ID:LiZhaoxing,项目名称:hostapd,代码行数:17,代码来源:test_p2p_channel.py
示例17: test_p2p_channel_5ghz_no_vht
def test_p2p_channel_5ghz_no_vht(dev):
"""P2P group formation with 5 GHz preference when VHT channels are disallowed"""
try:
set_country("US", dev[0])
dev[0].request("P2P_SET disallow_freq 5180-5240")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=dev[1], r_intent=0,
test_data=False)
check_grpform_results(i_res, r_res)
freq = int(i_res['freq'])
if freq < 5000:
raise Exception("Unexpected channel %d MHz - did not follow 5 GHz preference" % freq)
remove_group(dev[0], dev[1])
finally:
set_country("00")
dev[0].request("P2P_SET disallow_freq ")
dev[1].flush_scan_cache()
开发者ID:Hansenq,项目名称:wifi-goes-to-town,代码行数:17,代码来源:test_p2p_channel.py
示例18: test_p2p_channel_random_social_with_op_class_change
def test_p2p_channel_random_social_with_op_class_change(dev, apdev, params):
"""P2P group formation using random social channel with oper class change needed"""
try:
set_country("US", dev[0])
logger.info("Start group on 5 GHz")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=dev[1], r_intent=0,
test_data=False)
check_grpform_results(i_res, r_res)
freq = int(i_res['freq'])
if freq < 5000:
raise Exception("Unexpected channel %d MHz - did not pick 5 GHz preference" % freq)
remove_group(dev[0], dev[1])
logger.info("Disable 5 GHz and try to re-start group based on 5 GHz preference")
dev[0].request("SET p2p_oper_reg_class 115")
dev[0].request("SET p2p_oper_channel 36")
dev[0].request("P2P_SET disallow_freq 5000-6000")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=dev[1], r_intent=0,
test_data=False)
check_grpform_results(i_res, r_res)
freq = int(i_res['freq'])
if freq not in [ 2412, 2437, 2462 ]:
raise Exception("Unexpected channel %d MHz - did not pick random social channel" % freq)
remove_group(dev[0], dev[1])
out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"),
"wifi_p2p.public_action.subtype == 0")
if out is not None:
last = None
for l in out.splitlines():
if "Operating Channel:" not in l:
continue
last = l
if last is None:
raise Exception("Could not find GO Negotiation Request")
if "Operating Class 81" not in last:
raise Exception("Unexpected operating class: " + last.strip())
finally:
set_country("00")
dev[0].request("P2P_SET disallow_freq ")
dev[0].request("SET p2p_oper_reg_class 0")
dev[0].request("SET p2p_oper_channel 0")
dev[1].flush_scan_cache()
开发者ID:Hansenq,项目名称:wifi-goes-to-town,代码行数:45,代码来源:test_p2p_channel.py
示例19: test_p2p_device_group_remove
def test_p2p_device_group_remove(dev, apdev):
"""P2P group removal via the P2P ctrl interface with driver using cfg80211 P2P Device"""
with HWSimRadio(use_p2p_device=True) as (radio, iface):
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add(iface)
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
r_dev=wpas, r_intent=0)
check_grpform_results(i_res, r_res)
# Issue the remove request on the interface which will be removed
p2p_iface_wpas = WpaSupplicant(ifname=r_res['ifname'])
res = p2p_iface_wpas.request("P2P_GROUP_REMOVE *")
if "OK" not in res:
raise Exception("Failed to remove P2P group")
ev = wpas.wait_global_event(["P2P-GROUP-REMOVED"], timeout=10)
if ev is None:
raise Exception("Group removal event not received")
if not wpas.global_ping():
raise Exception("Could not ping global ctrl_iface after group removal")
开发者ID:aelarabawy,项目名称:hostap,代码行数:18,代码来源:test_p2p_device.py
示例20: test_concurrent_grpform_while_connecting2
def test_concurrent_grpform_while_connecting2(dev, apdev):
"""Concurrent P2P group formation while connecting to an AP (2)"""
logger.info("Start connection to an infrastructure AP")
hostapd.add_ap(apdev[0]['ifname'], { "ssid": "test-open" })
dev[0].connect("test-open", key_mgmt="NONE", wait_connect=False)
dev[1].request("BSS_FLUSH 0")
dev[1].scan(freq="2412", only_new=True)
logger.info("Form a P2P group while connecting to an AP")
dev[0].request("SET p2p_no_group_iface 0")
[i_res, r_res] = go_neg_pbc(i_dev=dev[0], i_intent=15, i_freq=2412,
r_dev=dev[1], r_intent=0, r_freq=2412)
check_grpform_results(i_res, r_res)
remove_group(dev[0], dev[1])
logger.info("Confirm AP connection after P2P group removal")
dev[0].wait_completed()
hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
开发者ID:bartve-enovation,项目名称:hostap,代码行数:19,代码来源:test_p2p_concurrency.py
注:本文中的test_p2p_grpform.check_grpform_results函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论