def test_gdal_rasterize_3():

    if test_cli_utilities.get_gdal_contour_path() is None:
        pytest.skip()

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        pytest.skip()

    gdaltest.runexternal(test_cli_utilities.get_gdal_contour_path() + ' ../gdrivers/data/n43.dt0 tmp/n43dt0.shp -i 10 -3d')

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' -3d tmp/n43dt0.shp tmp/n43dt0.tif -l n43dt0 -ts 121 121 -a_nodata 0 -q')

    ds_ref = gdal.Open('../gdrivers/data/n43.dt0')
    ds = gdal.Open('tmp/n43dt0.tif')

    assert ds.GetRasterBand(1).GetNoDataValue() == 0.0, \
        'did not get expected nodata value'

    assert ds.RasterXSize == 121 and ds.RasterYSize == 121, \
        'did not get expected dimensions'

    gt_ref = ds_ref.GetGeoTransform()
    gt = ds.GetGeoTransform()
    for i in range(6):
        assert abs(gt[i] - gt_ref[i]) <= 1e-6, 'did not get expected geotransform'

    wkt = ds.GetProjectionRef()
    assert wkt.find("WGS_1984") != -1, 'did not get expected SRS'

def test_gdal_rasterize_2():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return "skip"

    # Create a raster to rasterize into.

    target_ds = gdal.GetDriverByName("GTiff").Create("tmp/rast2.tif", 12, 12, 3, gdal.GDT_Byte)
    target_ds.SetGeoTransform((0, 1, 0, 12, 0, -1))

    # Close TIF file
    target_ds = None

    # Run the algorithm.
    gdaltest.runexternal(
        test_cli_utilities.get_gdal_rasterize_path()
        + " -at -b 3 -b 2 -b 1 -burn 200 -burn 220 -burn 240 -l cutline ../alg/data/cutline.csv tmp/rast2.tif"
    )

    # Check results.

    target_ds = gdal.Open("tmp/rast2.tif")
    expected = 121
    checksum = target_ds.GetRasterBand(2).Checksum()
    if checksum != expected:
        print(checksum)
        gdaltest.post_reason("Did not get expected image checksum")

        return "fail"

    target_ds = None

    return "success"

def test_gdal_rasterize_6():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return 'skip'

    f = open('tmp/test_gdal_rasterize_6.csv', 'wb')
    f.write("""WKT,Value
"POLYGON((2 49,2 50,3 50,3 49,2 49))",255
""".encode('ascii'))
    f.close()
    
    f = open('tmp/test_gdal_rasterize_6.prj', 'wb')
    f.write("""EPSG:4326""".encode('ascii'))
    f.close()
    
    ds = gdal.GetDriverByName('GTiff').Create('tmp/test_gdal_rasterize_6.tif', 100, 100)
    ds.SetGeoTransform([200000,(400000-200000)/100,0,6500000,0,-(6500000-6200000)/100])
    sr = osr.SpatialReference()
    sr.ImportFromEPSG(3857)
    ds.SetProjection(sr.ExportToWkt())
    ds = None

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' -l test_gdal_rasterize_6 tmp/test_gdal_rasterize_6.csv tmp/test_gdal_rasterize_6.tif -a Value')

    ds = gdal.Open('tmp/test_gdal_rasterize_6.tif')
    if ds.GetRasterBand(1).Checksum() != 39190:
        gdaltest.post_reason('did not get expected checksum')
        print(ds.GetRasterBand(1).Checksum())
        return 'fail'

    ds = None

    return 'success'

def test_gdal_rasterize_4():

    if test_cli_utilities.get_gdal_contour_path() is None:
        pytest.skip()

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        pytest.skip()

    gdal.GetDriverByName('GTiff').Delete('tmp/n43dt0.tif')

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' -3d tmp/n43dt0.shp tmp/n43dt0.tif -l n43dt0 -tr 0.008333333333333  0.008333333333333 -a_nodata 0 -a_srs EPSG:4326')

    ds_ref = gdal.Open('../gdrivers/data/n43.dt0')
    ds = gdal.Open('tmp/n43dt0.tif')

    assert ds.GetRasterBand(1).GetNoDataValue() == 0.0, \
        'did not get expected nodata value'

    # Allow output to grow by 1/2 cell, as per #6058
    assert ds.RasterXSize == 122 and ds.RasterYSize == 122, \
        'did not get expected dimensions'

    gt_ref = ds_ref.GetGeoTransform()
    gt = ds.GetGeoTransform()
    assert abs(gt[1] - gt_ref[1]) <= 1e-6 and abs(gt[5] - gt_ref[5]) <= 1e-6, \
        'did not get expected geotransform(dx/dy)'

    # Allow output to grow by 1/2 cell, as per #6058
    assert (abs(gt[0] + (gt[1] / 2) - gt_ref[0]) <= 1e-6 and \
       abs(gt[3] + (gt[5] / 2) - gt_ref[3]) <= 1e-6), \
        'did not get expected geotransform'

    wkt = ds.GetProjectionRef()
    assert wkt.find("WGS_1984") != -1, 'did not get expected SRS'

def test_gdal_rasterize_2():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        pytest.skip()

    # Create a raster to rasterize into.

    target_ds = gdal.GetDriverByName('GTiff').Create('tmp/rast2.tif', 12, 12, 3,
                                                     gdal.GDT_Byte)
    target_ds.SetGeoTransform((0, 1, 0, 12, 0, -1))

    # Close TIF file
    target_ds = None

    # Run the algorithm.
    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' -at -b 3 -b 2 -b 1 -burn 200 -burn 220 -burn 240 -l cutline ../alg/data/cutline.csv tmp/rast2.tif')

    # Check results.

    target_ds = gdal.Open('tmp/rast2.tif')
    expected = 121
    checksum = target_ds.GetRasterBand(2).Checksum()
    assert checksum == expected, 'Did not get expected image checksum'

    target_ds = None

def test_gdal_rasterize_5():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return 'skip'

    f = open('tmp/test_gdal_rasterize_5.csv', 'wb')
    f.write("""x,y,Value
0.5,0.5,1
0.5,2.5,2
2.5,2.5,3
2.5,0.5,4
1.5,1.5,5""".encode('ascii'))
    f.close()

    f = open('tmp/test_gdal_rasterize_5.vrt', 'wb')
    f.write("""<OGRVRTDataSource>
    <OGRVRTLayer name="test">
        <SrcDataSource relativetoVRT="1">test_gdal_rasterize_5.csv</SrcDataSource>
        <SrcLayer>test_gdal_rasterize_5</SrcLayer>
        <GeometryType>wkbPoint</GeometryType>
        <GeometryField encoding="PointFromColumns" x="x" y="y"/>
    </OGRVRTLayer>
</OGRVRTDataSource>""".encode('ascii'))
    f.close()

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' -l test tmp/test_gdal_rasterize_5.vrt tmp/test_gdal_rasterize_5.tif -a Value -tr 1 1 -ot Byte')

    ds = gdal.Open('tmp/test_gdal_rasterize_5.tif')
    if ds.RasterXSize != 3 or ds.RasterYSize != 3:
        gdaltest.post_reason('did not get expected dimensions')
        print(ds.RasterXSize)
        print(ds.RasterYSize)
        return 'fail'

    gt_ref = [0,1,0,3,0,-1]
    gt = ds.GetGeoTransform()
    for i in range(6):
        if (abs(gt[i]-gt_ref[i])>1e-6):
            gdaltest.post_reason('did not get expected geotransform')
            print(gt)
            print(gt_ref)
            return 'fail'

    data = ds.GetRasterBand(1).ReadRaster(0, 0, 3, 3)
    if data.decode('iso-8859-1') != '\x02\x00\x03\x00\x05\x00\x01\x00\x04':
        gdaltest.post_reason('did not get expected values')
        return 'fail'

    ds = None

    return 'success'

def test_gdal_rasterize_7():

    try:
        from osgeo import gdalnumeric

        gdalnumeric.zeros
    except:
        return "skip"

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return "skip"

    drv = ogr.GetDriverByName("SQLite")
    if drv is None:
        return "skip"
    gdal.PushErrorHandler("CPLQuietErrorHandler")
    ds = drv.CreateDataSource("/vsimem/foo.db", options=["SPATIALITE=YES"])
    if ds is None:
        return "skip"
    ds = None
    gdal.Unlink("/vsimem/foo.db")
    gdal.PopErrorHandler()

    f = open("tmp/test_gdal_rasterize_7.csv", "wb")
    x = (0, 0, 50, 50, 25)
    y = (0, 50, 0, 50, 25)
    f.write("WKT,Value\n".encode("ascii"))
    for i in range(len(x)):
        r = "POINT(%d %d),1\n" % (x[i], y[i])
        f.write(r.encode("ascii"))

    f.close()

    cmds = """tmp/test_gdal_rasterize_7.csv
              tmp/test_gdal_rasterize_7.tif
              -init 0 -burn 1
              -sql "SELECT ST_Buffer(GEOMETRY, 2) FROM test_gdal_rasterize_7"
              -dialect sqlite -tr 1 1 -te -1 -1 51 51"""

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + " " + cmds)

    ds = gdal.Open("tmp/test_gdal_rasterize_7.tif")
    data = ds.GetRasterBand(1).ReadAsArray()
    if data.sum() <= 5:
        gdaltest.post_reason("Only rasterized 5 pixels or less.")
        return "fail"

    ds = None

    return "success"

def test_gdal_rasterize_4():

    if test_cli_utilities.get_gdal_contour_path() is None:
        return "skip"

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return "skip"

    gdal.GetDriverByName("GTiff").Delete("tmp/n43dt0.tif")

    gdaltest.runexternal(
        test_cli_utilities.get_gdal_rasterize_path()
        + " -3d tmp/n43dt0.shp tmp/n43dt0.tif -l n43dt0 -tr 0.008333333333333  0.008333333333333 -a_nodata 0 -a_srs EPSG:4326"
    )

    ds_ref = gdal.Open("../gdrivers/data/n43.dt0")
    ds = gdal.Open("tmp/n43dt0.tif")

    if ds.GetRasterBand(1).GetNoDataValue() != 0.0:
        gdaltest.post_reason("did not get expected nodata value")
        return "fail"

    # Allow output to grow by 1/2 cell, as per #6058
    if ds.RasterXSize != 122 or ds.RasterYSize != 122:
        gdaltest.post_reason("did not get expected dimensions")
        return "fail"

    gt_ref = ds_ref.GetGeoTransform()
    gt = ds.GetGeoTransform()
    if abs(gt[1] - gt_ref[1]) > 1e-6 or abs(gt[5] - gt_ref[5]) > 1e-6:
        gdaltest.post_reason("did not get expected geotransform(dx/dy)")
        print(gt)
        print(gt_ref)
        return "fail"

    # Allow output to grow by 1/2 cell, as per #6058
    if abs(gt[0] + (gt[1] / 2) - gt_ref[0]) > 1e-6 or abs(gt[3] + (gt[5] / 2) - gt_ref[3]) > 1e-6:
        gdaltest.post_reason("did not get expected geotransform")
        print(gt)
        print(gt_ref)
        return "fail"

    wkt = ds.GetProjectionRef()
    if wkt.find("WGS_1984") == -1:
        gdaltest.post_reason("did not get expected SRS")
        print(wkt)
        return "fail"

    return "success"

def test_gdal_rasterize_7():

    try:
        from osgeo import gdalnumeric
        gdalnumeric.zeros
    except (ImportError, AttributeError):
        return 'skip'

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return 'skip'

    drv = ogr.GetDriverByName('SQLite')
    if drv is None:
        return 'skip'
    gdal.PushErrorHandler('CPLQuietErrorHandler')
    ds = drv.CreateDataSource('/vsimem/foo.db', options=['SPATIALITE=YES'])
    if ds is None:
        return 'skip'
    ds = None
    gdal.Unlink('/vsimem/foo.db')
    gdal.PopErrorHandler()

    f = open('tmp/test_gdal_rasterize_7.csv', 'wb')
    x = (0, 0, 50, 50, 25)
    y = (0, 50, 0, 50, 25)
    f.write('WKT,Value\n'.encode('ascii'))
    for i, xi in enumerate(x):
        r = 'POINT(%d %d),1\n' % (xi, y[i])
        f.write(r.encode('ascii'))

    f.close()

    cmds = '''tmp/test_gdal_rasterize_7.csv
              tmp/test_gdal_rasterize_7.tif
              -init 0 -burn 1
              -sql "SELECT ST_Buffer(GEOMETRY, 2) FROM test_gdal_rasterize_7"
              -dialect sqlite -tr 1 1 -te -1 -1 51 51'''

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' ' + cmds)

    ds = gdal.Open('tmp/test_gdal_rasterize_7.tif')
    data = ds.GetRasterBand(1).ReadAsArray()
    if data.sum() <= 5:
        gdaltest.post_reason('Only rasterized 5 pixels or less.')
        return 'fail'

    ds = None

    return 'success'

def test_gdal_rasterize_cleanup():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return "skip"

    gdal.GetDriverByName("GTiff").Delete("tmp/rast1.tif")
    ogr.GetDriverByName("MapInfo File").DeleteDataSource("tmp/rast1.tab")

    gdal.GetDriverByName("GTiff").Delete("tmp/rast2.tif")

    ogr.GetDriverByName("ESRI Shapefile").DeleteDataSource("tmp/n43dt0.shp")
    gdal.GetDriverByName("GTiff").Delete("tmp/n43dt0.tif")

    gdal.GetDriverByName("GTiff").Delete("tmp/test_gdal_rasterize_5.tif")
    os.unlink("tmp/test_gdal_rasterize_5.csv")
    os.unlink("tmp/test_gdal_rasterize_5.vrt")

    gdal.GetDriverByName("GTiff").Delete("tmp/test_gdal_rasterize_6.tif")
    os.unlink("tmp/test_gdal_rasterize_6.csv")
    os.unlink("tmp/test_gdal_rasterize_6.prj")

    if os.path.exists("tmp/test_gdal_rasterize_7.tif"):
        gdal.GetDriverByName("GTiff").Delete("tmp/test_gdal_rasterize_7.tif")
    if os.path.exists("tmp/test_gdal_rasterize_7.csv"):
        os.unlink("tmp/test_gdal_rasterize_7.csv")

    gdal.GetDriverByName("GTiff").Delete("tmp/test_gdal_rasterize_8.tif")
    os.unlink("tmp/test_gdal_rasterize_8.csv")

    return "success"

def test_gdal_rasterize_3():

    if test_cli_utilities.get_gdal_contour_path() is None:
        return "skip"

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return "skip"

    gdaltest.runexternal(
        test_cli_utilities.get_gdal_contour_path() + " ../gdrivers/data/n43.dt0 tmp/n43dt0.shp -i 10 -3d"
    )

    gdaltest.runexternal(
        test_cli_utilities.get_gdal_rasterize_path()
        + " -3d tmp/n43dt0.shp tmp/n43dt0.tif -l n43dt0 -ts 121 121 -a_nodata 0 -q"
    )

    ds_ref = gdal.Open("../gdrivers/data/n43.dt0")
    ds = gdal.Open("tmp/n43dt0.tif")

    if ds.GetRasterBand(1).GetNoDataValue() != 0.0:
        gdaltest.post_reason("did not get expected nodata value")
        return "fail"

    if ds.RasterXSize != 121 or ds.RasterYSize != 121:
        gdaltest.post_reason("did not get expected dimensions")
        return "fail"

    gt_ref = ds_ref.GetGeoTransform()
    gt = ds.GetGeoTransform()
    for i in range(6):
        if abs(gt[i] - gt_ref[i]) > 1e-6:
            gdaltest.post_reason("did not get expected geotransform")
            print(gt)
            print(gt_ref)
            return "fail"

    wkt = ds.GetProjectionRef()
    if wkt.find("WGS_1984") == -1:
        gdaltest.post_reason("did not get expected SRS")
        print(wkt)
        return "fail"

    return "success"

def test_gdal_rasterize_8():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        pytest.skip()

    f = open('tmp/test_gdal_rasterize_8.csv', 'wb')
    f.write('WKT,Value\n'.encode('ascii'))
    f.write('"LINESTRING (0 0, 5 5, 10 0, 10 10)",1'.encode('ascii'))
    f.close()

    cmds = '''tmp/test_gdal_rasterize_8.csv tmp/test_gdal_rasterize_8.tif -init 0 -burn 1 -tr 1 1'''

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' ' + cmds)

    ds = gdal.Open('tmp/test_gdal_rasterize_8.tif')
    cs = ds.GetRasterBand(1).Checksum()
    assert cs == 21, 'Did not rasterize line data properly'

    ds = None

def test_gdal_rasterize_4():

    if test_cli_utilities.get_gdal_contour_path() is None:
        return 'skip'

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return 'skip'

    gdal.GetDriverByName('GTiff').Delete( 'tmp/n43dt0.tif' )

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' -3d tmp/n43dt0.shp tmp/n43dt0.tif -l n43dt0 -tr 0.008333333333333  0.008333333333333 -a_nodata 0 -a_srs EPSG:4326')

    ds_ref = gdal.Open('../gdrivers/data/n43.dt0')
    ds = gdal.Open('tmp/n43dt0.tif')

    if ds.GetRasterBand(1).GetNoDataValue() != 0.0:
        gdaltest.post_reason('did not get expected nodata value')
        return 'fail'

    if ds.RasterXSize != 121 or ds.RasterYSize != 121:
        gdaltest.post_reason('did not get expected dimensions')
        return 'fail'

    gt_ref = ds_ref.GetGeoTransform()
    gt = ds.GetGeoTransform()
    for i in range(6):
        if (abs(gt[i]-gt_ref[i])>1e-6):
            gdaltest.post_reason('did not get expected geotransform')
            print(gt)
            print(gt_ref)
            return 'fail'

    wkt = ds.GetProjectionRef()
    if wkt.find("WGS_1984") == -1:
        gdaltest.post_reason('did not get expected SRS')
        print(wkt)
        return 'fail'

    return 'success'

def test_gdal_rasterize_8():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return "skip"

    f = open("tmp/test_gdal_rasterize_8.csv", "wb")
    f.write("WKT,Value\n".encode("ascii"))
    f.write('"LINESTRING (0 0, 5 5, 10 0, 10 10)",1'.encode("ascii"))
    f.close()

    cmds = """tmp/test_gdal_rasterize_8.csv tmp/test_gdal_rasterize_8.tif -init 0 -burn 1 -tr 1 1"""

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + " " + cmds)

    ds = gdal.Open("tmp/test_gdal_rasterize_8.tif")
    cs = ds.GetRasterBand(1).Checksum()
    if cs != 21:
        gdaltest.post_reason("Did not rasterize line data properly")
        print(cs)
        return "fail"

    ds = None

    return "success"

def test_gdal_rasterize_8():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return 'skip'

    f = open('tmp/test_gdal_rasterize_8.csv', 'wb')
    f.write('WKT,Value\n'.encode('ascii'))
    f.write('"LINESTRING (0 0, 5 5, 10 0, 10 10)",1'.encode('ascii'))
    f.close()

    cmds = '''tmp/test_gdal_rasterize_8.csv tmp/test_gdal_rasterize_8.tif -init 0 -burn 1 -tr 1 1'''

    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' ' + cmds)

    ds = gdal.Open('tmp/test_gdal_rasterize_8.tif')
    cs = ds.GetRasterBand(1).Checksum()
    if cs != 21:
        gdaltest.post_reason('Did not rasterize line data properly')
        print(cs)
        return 'fail'

    ds = None

    return 'success'

def test_gdal_rasterize_1():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return "skip"

    # Setup working spatial reference
    # sr_wkt = 'LOCAL_CS["arbitrary"]'
    # sr = osr.SpatialReference( sr_wkt )
    sr = osr.SpatialReference()
    sr.ImportFromEPSG(32631)
    sr_wkt = sr.ExportToWkt()

    # Create a raster to rasterize into.

    target_ds = gdal.GetDriverByName("GTiff").Create("tmp/rast1.tif", 100, 100, 3, gdal.GDT_Byte)
    target_ds.SetGeoTransform((1000, 1, 0, 1100, 0, -1))
    target_ds.SetProjection(sr_wkt)

    # Close TIF file
    target_ds = None

    # Create a layer to rasterize from.

    rast_ogr_ds = ogr.GetDriverByName("MapInfo File").CreateDataSource("tmp/rast1.tab")
    rast_lyr = rast_ogr_ds.CreateLayer("rast1", srs=sr)

    rast_lyr.GetLayerDefn()
    field_defn = ogr.FieldDefn("foo")
    rast_lyr.CreateField(field_defn)

    # Add a polygon.

    wkt_geom = "POLYGON((1020 1030,1020 1045,1050 1045,1050 1030,1020 1030))"

    feat = ogr.Feature(rast_lyr.GetLayerDefn())
    feat.SetGeometryDirectly(ogr.Geometry(wkt=wkt_geom))

    rast_lyr.CreateFeature(feat)

    # Add feature without geometry to test fix for #3310
    feat = ogr.Feature(rast_lyr.GetLayerDefn())
    rast_lyr.CreateFeature(feat)

    # Add a linestring.

    wkt_geom = "LINESTRING(1000 1000, 1100 1050)"

    feat = ogr.Feature(rast_lyr.GetLayerDefn())
    feat.SetGeometryDirectly(ogr.Geometry(wkt=wkt_geom))

    rast_lyr.CreateFeature(feat)

    # Close file
    rast_ogr_ds.Destroy()

    # Run the algorithm.
    (out, err) = gdaltest.runexternal_out_and_err(
        test_cli_utilities.get_gdal_rasterize_path()
        + " -b 3 -b 2 -b 1 -burn 200 -burn 220 -burn 240 -l rast1 tmp/rast1.tab tmp/rast1.tif"
    )
    if not (err is None or err == ""):
        gdaltest.post_reason("got error/warning")
        print(err)
        return "fail"

    # Check results.

    target_ds = gdal.Open("tmp/rast1.tif")
    expected = 6452
    checksum = target_ds.GetRasterBand(2).Checksum()
    if checksum != expected:
        print(checksum)
        gdaltest.post_reason("Did not get expected image checksum")

        return "fail"

    target_ds = None

    return "success"

def test_gdal_rasterize_1():

    if test_cli_utilities.get_gdal_rasterize_path() is None:
        return 'skip'

    # Setup working spatial reference
    #sr_wkt = 'LOCAL_CS["arbitrary"]'
    #sr = osr.SpatialReference( sr_wkt )
    sr = osr.SpatialReference()
    sr.ImportFromEPSG(32631)
    sr_wkt = sr.ExportToWkt()
    
    # Create a raster to rasterize into.

    target_ds = gdal.GetDriverByName('GTiff').Create( 'tmp/rast1.tif', 100, 100, 3,
                                                    gdal.GDT_Byte )
    target_ds.SetGeoTransform( (1000,1,0,1100,0,-1) )
    target_ds.SetProjection( sr_wkt )

    # Close TIF file
    target_ds = None
    
    # Create a layer to rasterize from.

    rast_ogr_ds = \
              ogr.GetDriverByName('MapInfo File').CreateDataSource( 'tmp/rast1.tab' )
    rast_lyr = rast_ogr_ds.CreateLayer( 'rast1', srs=sr )

    layer_defn = rast_lyr.GetLayerDefn()
    field_defn = ogr.FieldDefn('foo')
    rast_lyr.CreateField(field_defn)
    field_defn.Destroy()

    # Add a polygon.
    
    wkt_geom = 'POLYGON((1020 1030,1020 1045,1050 1045,1050 1030,1020 1030))'
    
    feat = ogr.Feature( rast_lyr.GetLayerDefn() )
    feat.SetGeometryDirectly( ogr.Geometry(wkt = wkt_geom) )

    rast_lyr.CreateFeature( feat )

    # Add feature without geometry to test fix for #3310
    feat = ogr.Feature( rast_lyr.GetLayerDefn() )
    rast_lyr.CreateFeature( feat )

    # Add a linestring.
    
    wkt_geom = 'LINESTRING(1000 1000, 1100 1050)'
    
    feat = ogr.Feature( rast_lyr.GetLayerDefn() )
    feat.SetGeometryDirectly( ogr.Geometry(wkt = wkt_geom) )

    rast_lyr.CreateFeature( feat )

    # Close file
    rast_ogr_ds.Destroy()
    

    # Run the algorithm.
    gdaltest.runexternal(test_cli_utilities.get_gdal_rasterize_path() + ' -b 3 -b 2 -b 1 -burn 200 -burn 220 -burn 240 -l rast1 tmp/rast1.tab tmp/rast1.tif')

    # Check results.

    target_ds = gdal.Open('tmp/rast1.tif')
    expected = 6452
    checksum = target_ds.GetRasterBand(2).Checksum()
    if checksum != expected:
        print(checksum)
        gdaltest.post_reason( 'Did not get expected image checksum' )

        return 'fail'
    
    target_ds = None

    return 'success'